Editing Slide Video with preview

Hi there,
I have made a slide video (published mp4) and in CP6 clicking on (Edit Video timing) in the Properties panel, I do get the video/swf to show 1 screenshot, bu will not display full preview of the swf......jsut atiny 300*200 (aprox) window on bottom right of the Properties panel....
Is there a way to view a larger preview th anyone knows of? (aside from actually running the mp4 video).......image below shows what I am getting....
Cheers
Rossco

Hi,
Foubnd my own answer to this (although the preview is still a problem)...
My answer was to open a 2nd copy of CP....and view side by side :-)
Cheers
Rossco

Similar Messages

  • Editing Slide Video Timing in CP5

    I'm experimenting with editing the timing for slide video in CP5.  I have the video on one slide and now I want to distribute it over other slides but not equally like it does when asked when you first bring a video in.  I want to use the edit video timing from the Properties Inspector.  When I open the video timing and then try to slide the window on the screen it disappears and CP5 freezes.  Anyone else experience this issue?
    Thank you,
    Susan

    Hi,
    Foubnd my own answer to this (although the preview is still a problem)...
    My answer was to open a 2nd copy of CP....and view side by side :-)
    Cheers
    Rossco

  • I edited a video with iMovie but I can not burn it to DVD because I get an "error" answer number 49!How may I correct this?

    I took the video with my iPAD 2 then I send it to my Macbook through iTunes and edited the movie. Now everything is ready to be put on a DVD but I tryed to "finalise"but could get there because once for an error number 50, then I tryed to export it and got another error 49 ... I would like to put it on a DVD beore this saterday because the family is going back home and wold lke to have the movie of their just born baby at home.
    Can somebody help me?
    Thanks
    Cesar

    Hi
    Error -49 opWrErr  File already open with write permission
    Trash the preference files while application is NOT Running.
    from Karsten Schlüter
    Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
    This issue occours only on MacOs machines using 10.7x
    try switching-off the Local Mobile Backup
    in Terminal copy/paste
    sudo tmutil disablelocal
    Re-launch Mac
    Error -50 paramErr  Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    What this means in Your situation is above me.
    • free space on internal boot hard disk? How much ?
    Video codec
    • streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
    Pictures
    • in what format ? .jpg, .bmp, .tif, else ?
    Audio
    • from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    The "com.apple.iMovie.plist" file
    Many users has not observed that there are TWO libraries.
    • Library - at root level
    • Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Klaus1
    You need more free space on your hard drive.
    jonorparkerjon
    After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
    Where do Your material come from
    • Camera
    • External hard disk
    • USB-memory
    And all are connected so that iMovie can find it ?
    Yours Bengt W

  • Problems Editing Previous Annotations with Preview

    Hi,
    I was just wondering if anyone else has had a similar problem with Preview and/or has any advice on how to fix it.
    Ever since upgrading to Mountain Lion, I've been having problems whenever I try to edit any of my text annotations in Preview. All of my notes for school are given as PDFs, so I have always used Preview and the textbox function to take notes during lecture. Before I upgraded, if I opened a previously-annotated document to study from and wanted to change something or add to the text, I would simply double-click the textbox and be able to fix it in 1 second.
    Unfortunately, trying to make any changes to annotations has become a major process ever since switching to Mountain Lion. 
    Basically, as soon as I double-click any textbox to edit something I wrote at an earlier time, the box will shrink up to a single line that goes off the page and into oblivion. I have to resize the textbox over and over again just to fit it back on the page, which can be time-consuming and frustrating when paragraphs of text are suddenly condensed to one line that extends ten miles beyond the margins. It happens both with older documents from Lion and with the new documents I've only downloaded and annotated since upgrading to Mountain Lion. I thought maybe it was just my computer, but I tried it on a friend's Mac with Mountain Lion and had the same problem.
    I have only used Preview for everything, so all of my annotations have been made using the same program. Also, it gives me no trouble if I try to edit as long as the document remains open; it only happens after I close out of a document and open it up again at a later time (even if it's immediately after closing it). Unfortunately, I can't keep 200+ documents open on the chance I might need to edit them at some point.
    If anyone has any clue how I can stop this from happening in Preview or has a suggestion for another good PDF editor (aside from anything Adobe preferably), I would really appreciate it!!
    Thank you very much in advance.

    This is happening to me too! It's so frustrating especially since I've come to love Preview before upgrading to mountain lion. At first glace it seemed Preview had become more userfriendly with the textbox, line and circle drawers all separate icons now but the textboxes are such a pain. I know it only takes an extra 5 seconds or so, but by the time you add all the 5 seconds' up, it's heaps of time. It's especially hard if I'm listening to a lecture and I have to stop and fix my textboxes while the lecturer is still talking.
    Sorry this isn't much of a solution, but I hope you don't feel alone dealing with this flaw!

  • Incomprehensible Editing of PDF with Preview

    I used to LOVE using Preview to do simple PDF document editing .. mostly just combining PDF files together. All you had to do was drag the PDF file into the sidebar of an existing one to append them together and you were done. Perfect!
    Now here is Snow Leopard and suddenly things have gone all ape-****. I can no longer figure out WHAT the side-bar is doing. I drag a PDF file into it and it seems to simply display that PDF file but doesnt combine the pages ... instead I get an incomprehensible hybrid view of two distinct PDF files kinds sorta wrapped into one view. Which I cannot seem to save and cannot seem to flatten. Save is utterly confusing ... I seem to save the file, but I only really save bits of it. I'm stumped .. Apple have taken a simple elegant model and made it virtually unusable.
    What's going on here? Is there something obvious I'm missing? Does anyone have ANY idea what Apple were intending with this utterly confusing "feature" ?

    See http://www.macosxhints.com/article.php?story=20071114191806624 and http://macintoshhowto.com/leopard/how-to-merge-pdf-files-with-preview-in-leopard .html

  • Any suggestions for editing Music Videos with Multiclip?

    Hi there. I have been reading about the new multiclip feature in FCPHD5. Sounds as if it would be perfect for editing a performance music video with multiple run throughs. In fact it almost seems too good to be true. I was writing to ask if anyone has tried this and what problems they encoutnrered or what workflow they could recommend. I haven't used multiclip before (or editied many music videos either) and would appreciate any suggestions.
    This is my idea so far.
    capture offlineRT the whole tape, make subclips with an angle setting of each take. Then edit the multiclip in a timeline which includes the song as an audio track. I thought I would synch with inpoints manually set to the beginning of the songs first riff in playback (as there was no clapper on set that day, curse them)
    I have questions about onlining as well and how to make it a less tormenting nerve racking experience. Maybe its just me but the thought of trashing all the media, duplicating projects and recapturing makes me break out in a cold sweat. But I'll deal with that later.
    Thanks for your thoughts, observations, suggestions.
    Have a merry Christmas
    Sincerely
    Peter Stenhouse

    The plan was to sync up the mixed PT audio to the video track. However the club screwed up the recording and I was left with using the audio from one of the tripod mounted cameras that I placed a stereo mike on.< </div>
    General advice for live performances:
    1. Depending on a computer to make the only recording is a silly idea. Use tape or a minidisk. Take a line feed off the main board and record it on at least one of the cameras.
    2. There is nothing that will substitute for missing timecode better than a good countdown. Insist the band develop a creative visual and aural timing cue that all cameras and mics can see.
    3. The most important part of shooting a performance or a lipsync gig for mulitcamera assembly is preproduction. The bugs, glitches and gotchas are all well known and thoroughly documented on thousands of band blogs.
    4. There is no excuse to go into a location shoot unprepared and carrying a solid backup plan for all of the stuff that will go wrong.
    5. A full, all-camera, all-personnel rehearsal is a good idea.
    6. The band's lighting guy knows nothing about video. Give him some help or give him the day off.
    bogiesan

  • I´m editing a video with photos, suddenly FCP X displays the spinning ball a few seconds every time I play the Timeline

    I´m in a project that is primarily composed of photos, lots of them. When I reached 10 minutes of work the spinning ball started to appear after an edit and when I try to play the timeline to see the results or preview my edit. I checked the source material and I realized that I made a begginner mistake: I had a lot of photos with too high resolution (4000x3000 for example), so I resized all photos to a more manageable size for FCP, 1024x768, and then I saw the light! FCP began to work normally again. Later I added more photos to the events folders, and when I finished the import, FCP returned to the same thing I described before. Someone has a Tip? I am working with too many photos? the video is planned to last 20 minutes, maybe I will assemble it with 400 photos, but in the events I have lots of photos, 2600 aprox, some of it referenced and others copied in the events folders. Maybe I have a lot of photos in the events folders?

    I´ve have done that but does not work. I have 12 GB of RAM in a Core i3 3.2 Ghz iMac, thanks

  • Editing a video with Photoshop CS5 extended.

    In 2009, I used Photoshop cs3 extended following tip 48 that I found from Russell Brown, to adjust color and add text to a video.
    Has that capability been removed from Photoshop?
    I have Photoshop CS5 extended
      Does anyone know how I can find Russell Brown's old tutorials?
    Regards
    Rick Yurick

    http://www.google.com/search?q=find+Russell+Brown's+old+tutorials
    He's a little difficult to miss. 

  • Editing GoPro videos with imovie on ipad air

    Hello,
    I'm new to this discussion board but I have a question. I recently bought a Gopro Hero 3+ and an ipad air. I have a 64gb Sdxc memory card for my gopro. So I already know that I have to convert the files from my gopro (which are Mp4 videos) to .mov files in order for them to come up in imovie. However, after I convert the video to .mov and put the video onto my ipad through Itunes, the video does not come up in imovie, the .mov video is only showing up on the Video app that is already installed on the ipad. Am I missing something? How do i get the .mov video to show up in imovie?
    Thanks for your help.

    You can use the following formats in iMovie:
    DV
    DV Widescreen
    HDV 1080i (25 and 30 fps)
    HDV 720p (25 and 30 fps)
    MPEG 4 Simple Profile
    iSight
    So, you may need to convert to mpeg 4 simple profile.

  • Is this pc good enough for me to use for edit my videos?

    Hi
    I just need someone to conform me that the pc im getting is good enough to edit my videos with!
    Program:Adobe premiere pro cs5 ofcourse
    Win 7 64bit ultimate
    Intel® Core i7 860 (2,80 Ghz, 8 MB cache)
    ASUS P7H55D-M EVO
    8 GB DDR3 1333MHz PC3-10666 (2x4GB) Corsair
    ATI® Radeon® 5670 1 GB 2xDVI/HDMI + HDTV/HDCP (Asus)
    Miditower Antec Sonata III (Quite) With 500 Watt
    corsair power supply 400w cx
    and I will be using 3 HDD 150Gb 150GB and 1TB
    First 150GB HDD will be use for OS,programs and pagefiles
    The other 150GB HDD will be used for media and project
    And the last 1TB HDD will be used for all my junk file music, export videos,previews and media chache
    Is this good enough?
    Thanx!

    How much whould be recommended?
    Their is another one to choose....same brand 650w ,the rest is much expensiver....:-(
    Thanx!

  • Camileo H30 - How to edit HD videos?

    Yes, it's true that video from H30 isn't supported by any editing program like After effect, Pinacle,Sony vegas, Adobe premiere etc...
    I want to ask for your ideas, what I can do, when I want to edit my recorded video :(
    Somewhere on google I found, that I need some codecs , but finaly it's only for Video, NOT audio.
    Thanks for any response :)

    Hello
    Here in forum there are already some other threads about editing the videos with 3rd party software they were not delivered with the notebook:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=56955
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=57544
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=56484
    I think they are useful threads for you :)

  • QuicktimePro 6.0 editing HD video

    Hello,
    I paid for QuicktimePro 6.0 in 2005, but almost never used. I tried to edit some videos few times but that was all. Now I bought a HD video camera and I want to edit. I just want to cut bad or unnecessary area of recording.
    I've heard it does not degrade the quality of video so I want to use QuicktimePro to do it. That is the only reason I want to use so I don't want to get the newest Quicktime 7.0.
    Anyway I have some HD video with .avi extension. How can I edit this video with QuicktimePro 6.0?
    Please help me.
    PC Windows   Windows XP  

    Hi,
    I found I can edit .mov HD video exported from Premiere 1.5, (trimed some portion of video), it worked. (good!)
    But the problem is captured video from canon HV10 using Premier 1.5, that always resolts in .avi extension. I cannot find the setting to make it quicktime. But since I found QuicktimePro 6.0 is still capable to cut and save, I guess my question is solved. I only need to find out how to export video in .mov from my Canon.
    Thanks for answering my question.
    P.S. I don't know what is codec.
    PC Windows   Windows XP  

  • How do  create a slide show with both video and photos in elements 12

    how do  create a slide show with both video and photos in elements 12

    Hi Brian
    You can batch process a set of prepared slides from Full Edit (see image) using:
    File >> Process Multiple Files
    In the PMF dialog you can choose filename, date, or description (caption)
    Make sure you choose a separate destination folder to your source folder so as tot to permanently overwrite your originals.
    Click image to view

  • Problems with Slide Video, when returning to a slide

    Hello all!
    I have a weird problem with my Captivate presenation, I wonder if anyone could help me...
    I have Captivate training course that I've made (output to Flash to run on a SCORM-compliant system).  It has a table of contents which points to different "lesson" screens with videos.
    All videos are of type "slide video", they will be launched from the LMS running the course. 
    When I click on the slide to play the video the first time, it plays just fine. But if I go back to it later, it acts erratically (plays from middle of video, starts looping weirdly, etc).
    Has anyone else seen this?  Wanted to know what I could do to fix.
    Thanks!
    Daniel

    To better illustrate, I've created a simple project with a menu slide and a slide video slide - a really over-simplified version of what I'm trying to do, but still has the same problem. The project is online to download at:
    http://ge.tt/8TqfXEA?c
    If anyone has time, here is how to recreate the difficulty I'm experiencing:
    Run the project (either preview or export SWF, either way is fine)
    From the first slide (menu), click on the button, which will go to the next slide and play the video
    After the video finishes, click on the "Return to Menu" button
    Once back at the menu, click the button to play the next slide & video again. You'll notice that playback is erratic (starts later in the video, also begins weirdly looping).
    Please let me know how I can rectify - it's a really big problem. If I'm doing something stupid, please let me know (although I don't think I am - it's a really minimal project setup).
    Thanks again for any help anyone can provide!!!

  • Making a Slide show with Video, Pictures, and Music

    Hi,
    I'm putting together a slide show with music containing music, narration, pictures and video shot from different cameras…would like to export in the best quality i can…
    What formats:
    o Pictures
    o Video
    o Audio
    o Narration
    along with:
    Codecs
    Compressions
    Are best used with FCE?

    Thanks very much for your response...one of the cameras used was a Sony HDV U1000...I believe it was shot 1080i..couldn't tell you what other cameras were, but I'm pretty sure they weren't HD cameras...just trying to help a buddy edit his project, but it seems the formats are all over the place....Trying to convert the sources so we can output a good product...I would probably use iDVD to make the DVD...I've made some videos for another friend using my Sony VX2100 and they look awesome...
    Thanks again for your help, it's very appreciated!
    Curt Casassa

Maybe you are looking for