Editing some photos on a MacBook, I get them on the Photo Stream on my iMac. Having set "automatically import Photo Stream to Library" in preferences, I still don't get them in the iMac photo library. How can I achieve this?

I'm editing my photos on a MacBook Air and then photostreaming. On my iMac, I get the photos in Photo Stream, where they cannot be changed. I've set the Photo Stream preferences to "automatically import to Library" - but that does not happen. How can I get these new photos into my "old" iMac photo library?

The monthly events "Feb2014" will show you all photos that have been imported from "My Photo STream", if you have enabled "Automatic Import" in the "Preferences > iCloud" tab.
The albums you are seeing under "iCloud" are the "Shared Photo Streams" and "My Photo Stream". To import from your "Shared Streams" drag the photos frommthe Shared Streams album to the Projects in the library panel.

Similar Messages

I want to delete my current exchange account. How can I achieve this and not lose stored information such as contacts, photos etc. please help. Thank you.

I want to delete my current exchange account and replace it with my new one. How can I achieve this and not lose my contacts, photos, etc associated with this account? Please help..
Thank you,

Bad idea.
What information do you want to share, exactly? You can share contacts, reminders, and calendars with other iCloud users without the need for both of you to use the same iCloud account. You can authorize both phones to use apps purchased under the same Apple ID without sharing an iCloud account.
Sharing an iCloud account is a bad idea in general. There is too much opportunity for someone to damage or delete data that will affect both.

My itunes library is empty but i want to upgrade my ipod without losing my music. how can i do this? please someone HELP!!!

i recently got a new laptop so my itunes library is empty but i want to upgrade my ipod without losing my music. how can i do this? please someone HELP!!!

but i got music from my old laptop and my little brothers laptop so basically its no way i can take whats already on my ipod and put it on my computer and drag and drop it to my new itunes library

The wi-Fi button on my IPhone 4S is greyed out and will not turn on and therefore I am not able to receive wi-fi. How can I fix this problem?

The wi-Fi button on my IPhone 4S is greyed out and will not turn on and therefore I am not able to receive wi-fi. How can I fix this problem?

Follow the steps in the article below to try and resolve the issue:
iOS: Wi-Fi settings grayed out or dim
If after all the steps the issue remains I'd suggest to book an appointment at an Apple Retail Store to have your iPhone evaluated or contact AppleCare for assistance.
Hope this helps

The auxillary jack on my Itouch does not allow sound to come through with headphones, though it works in a dock as well as external speakers. How can I fix this?

The auxillary jack on my Itouch does not allow sound to come through with headphones, though it works in a dock as well as external speakers. How can I fix this?

You can try the standard fixes of reset, restore from backup and restore to factory defaults to rule out a hsoftware proble. Frequently it is to to a problem with the eadphone jack and the solution is to replace the jack.

When I try to set up Time Machine, there are no back up disks displayed. Therefore, I cannot turn on Time Machine. How can I fix this?

When I try to set up Time Machine, there are no back up disks displayed. Therefore, I cannot turn on Time Machine. How can I fix this?

Thanks - let it finish, but zero out data is unnecessary. That option is intended to thoroughly erase previously recorded data so that it cannot be recovered without sophisticated data recovery techniques.
Case sensitive is OK but I suggest you simply select Mac OS X Extended since "case sensitive" may complicate things for you in the future, should it be necessary to restore files to a case-ignorant volume.
Once it finishes, make sure it appears as a selectable option in Time Machine. If it does your problems are solved, but consider using Disk Utility and reformatting it. This time don't worry about zeroing unused space, and select Mac OS X Extended (Journaled). It will only take a few seconds this time.
For a more thorough description read Apple Support Communites contributor Pondini's FAQ: http://pondini.org/TM/5.html Read the pink box regarding the subject of case sensitivity.
Also: Mac Basics: Time Machine

Sorry - Could you please help me how can I achieve this Search help ?

I am creating search help for the profit_center field,
For the search help :
The scenario is I have three Z-tables.
Example: The Data in tables are as shown below ( where F1, F2 are the fields ).
Ztable1
F1
A
B
C
D
Ztable2
F1 F2
A 1
A 2
B 112
B 113
C 34
D 43
D 55
D 87
Ztable3
PRCTR F1 F2
123 A 1
124 A 2
123 B 112
124 B 113
125 C 34
123 D 43
124 D 43
125 D 43
I need to create search help (Search Help is similar to Collective Search Help) for the field PRCTR of table Ztable3 like as below.
By pressing F4 on the field, a pop up should appear which should contains text labels& text fields on TAB-Screen ( A, B, C , D as shown below as text lables )against which text fields should appear.
TAB-Screen :
A ____________
B ____________
C ____________
D ____________
If F4 is pressed on I/O field (text fields) against A in the above TAB-Screen, Corresponding values ztable2-F2 of A from ztable2 ( = 1, 2 ) should appear as F4 help.
so that user can select ...
Is it possible to acieve this ? It would be a great help ....How can I achieve this ?
Finally based on above user selections say
A ____________
B ____________
C ____________
D ____________
corresponding prctr values should be collected.

<b>You can acheive this .... first by creating the search help exit ... by creating the maintaince view then using it in the Creation of the search help </b> ...
see the link for attaching the view to the serach help .
<a href="http://">http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_elementary.htm</a>
reward points if it is usefull...
Girish

I want to move my library from one account to another, it is also on a different computer. How can I do this?

I want to move my library from one account to another. However, when I try to sync th old account it is not syncing to my iphone or exporting out. How can I do this? Someone told me that it may be set to WiFi but it was not. My libray is sitting there but I can get it out. Mean while I have changed accounts and down loading to the iphone on my new account (and changing computers as well) How do I make this work so I can get my Library to sync to my iphone or export it from the old account. Is there anyway to move my library from one accont to another from the itunes side?
Thx Rick

Media is permanently tied to whatever account was used to purchase it. There is currently no possible way to change the account it is tied to.
Is there a reason why a new account was created?

Need to open .fcp project from FCP7 in FCPX 10.0.3. How can I achieve this without exporting the original from FCP7 to a QT movie? I need the original timeline in FCPX.

I have been working on a scholarship short film for a couple of months now (am a senior in high school) and have been using my school's Mac Pros with OSX 10.7 and FCP7 to edit it. Yesterday I bought a Macbook Pro and got FCPX, and am having trouble moving everything over (the computers at school are going to be wiped for the end of the year soon and I must continue to edit it on my MacBook). The project file "MattsShort.fcp" from FCP7 at school isn't even being recognized as a project file by the newest version of FCPX, so obviously I cannot open it and get to work connecting the media. How can I open this file in FCPX? Excluding exporting the project at school to a quicktime movie, I need to be able to further edit the timeline.

Cool, thanks! I was able to import the timeline into FCPX but all of the files are offline, even though I imported the same exact clips that were in the original FCP7 project, into the same 'event' that I have the new FCPX timeline in. I believe the problem lies in that FCPX imported the clips and named them after the date and time they were created, rather than the "Clip #XXX" that FCP7 assigned to the timeline. Does this sound correct? And if so, is the only way to solve this problem to go back to FCP7 and rename all of the clips assigned to the timeline to the names FCPX gave them? I really hope there is a simpler solution but given all of the work it takes to even import a FCP7 project into FCPX, I wouldn't be surprised if that was the only solution.
A little more info: When I use 7toX to convert the XML file, it says that my media will be offline.
EDIT: I just watched a youtube video that explained that 7toX brings over the required media.....why isn't it doing that for me? I am on two different computers if I hadn't already said.
Message was edited by: MattMadoni

I made a new Apple ID recently and when I go on the App Store it tells me to review my account but it also says I have to enter my bank card pin or a gift card code,how can I change this?

HHow do I make changes to my account, I don't want to enter any of my bank card pin or details or gift card, how do I change this? I've already tried to edit in my settings but it doesn't give me an option what so ever

Greetings Chlolouise78,
Thanks for participating in the Apple Support Communities.
If I understand right, you've created an Apple ID but you're not able to change or remove your payment information for the iTunes Store.
Be sure to follow the steps outlined in this article if you want to remove your payment information:
Change or remove your payment information from your iTunes Store account (Apple ID) - Apple Support
If you do not have the ability to select 'None' as your payment type, see this article for help:
Why can’t I select None when I edit my Apple ID payment information? - Apple Support
All the best,
Jeremy

Some iTunes music content is listed as having been synced to my iPhone, however, when I try to access it on my iPhone, it's not there. How can I fix this?

I had a problem that some of the content I had purchased from iTunes was skipped over when I tried to play it on my iPhone. Music copied from CDs and some other content from iTunes worked fine. To try and fix this, I removed all the music from my iPhone and then added it all back on again. This worked for some of the content that was being skipped over, but now some of the content that was being skipped over doesn't appear on my iPhone at all.
When I open iTunes on my MacBook Pro and choose "On This Phone", there are 100 songs - all purchased directly from iTunes - that are listed as being on my iPhone but aren't there when I open iTunes on my iPhone. I also notice that you can't redownload purchased tracks from the iTunes store.
Please help. Thanks.

Answers to the similar "No Content" question seem to say I should turn off ZoneAlarm. However, I can't find this option in iTunes and some Googling suggests that ZoneAlarm isn't actually an integral part of iTunes anyway so that doesn't seem to have helped.

I want to upgrade my software, but it says I need more start up memory. I keep my stuff on an external hard drive so I don't know what is eating my memory. How can I check this?

How can I figure out what is eating my memory so I can upgrade my software?

Do you mean disk storage space or physical RAM? The latter is memory, not the former. If you mean the former:
Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.
If you mean RAM, then you have to add more to the computer which is not possible on Air models.

How can I achieve this with less code or faster?

Hi Folks,
I have 2 database tables, 'products' and 'products_staging'.
Every day, the 'products_staging' table is updated with a fresh
batch of products (which are imported from xml files in a seperate
process using Navicat software). I need to somehow compare this
database with the 'products' database to look for specific changes
- i.e changes in price, deleted products, or new products. As some
of the fields in the 'products' database are manually altered, such
as the product name, I cannot do a straight sync with them.
Therefore, I use the only field that will remain unchanged as the
comparison field.
The somewhat crude method I have come up with is to loop
through the 'products_staging' table, looking for that specific
field against the 'products' table. If it finds it, it then checks
for a change in the price field (i.e has the price of that product
changed). If there is a change, the 'products' table is updated.
Likewise, if it's not found, it's treated as a new product and
inserted as such and so on. At the end of the loop, the record is
deleted from the 'products_staging' table - therefore at the end of
the process, the table is empty ready for the next import the
following day.
At the moment, the database handles around 300,000 rows - but
at some point I'm likely to be dealing with many more than that.
It's working as it is, but taking a considerable time to do so -
around 4 hours to go through the lot.
Any suggestions on a better way of accomplishing this? My
existing crude code is pasted below (the use of maxrows and the
redirect is to prevent time-outs - parse2.cfm is virtually
identical to this);

Firstly, if possible, get the DBs to talk to each other
without involving
CF. That will just be slowing things down. CF's for
generating HTML
pages, and whilst it CAN interact with databases, it's not
the best tool
for the job.
If that's not possible, use CF as a bridge between them, but
only to bulk
insert all the staging data into a temporary table (either
literally a
temporary table, or a permanent one used for holding data
temporarily ;-)
on the production DB, and then use a DB procedure to process
all the data,
again using only the DB server to do so.
Lastly, if you MUST use CF to do the data manipulation, then
minimise your
hits to the DB. Instead of doing single hits to the
production DB in your
prodconnect query, get ALL the data you're likely to need for
updates in
one hit, then use CF to generate a payload for a bulk update;
similarly any
missing data from production can be inferred from that the
difference
between the staging and update data, and that can be used as
your source of
payload for a bulk insert.
As a rule of thumb, if I find myself needing to perform
single-row queries
within a loop of another query, I start thinking I'm doing
something wrong.
Oh, yeah: when dealing with large amounts of queries like
that, ALWAYS use
<cfqueryparam> tags instead of static SQL strings.
Every non-parameterised
query you pass to the DB engine will need to be compiled
first, and then
it's also cached. Which slows you down, and eats memory on
the DB server.
This will leave the problem that you're not going to be
generating your
report as you go. However I imagine that's a "nice to have"
compared to
ensuring the thing actually works. You can generate your
report
separately, after the data processing has been done. I'm
fairly certain
you would be able to coerce a log out of the DB server,
somehow, anyway.
Adam

I have my Iphone 3gs set to "do not delete before asking", but after viewing an email it very often disappears without me deleting. How can I correct this?

My email messages often disappear after I read them without me deleting them. I have the option on mail settings clicked that states "do not delete with asking". Why is this happening and how can I correct it. When I return to read the email again, it is gone.

tantar wrote:
I have the option on mail settings clicked that states "do not delete with asking".
There is no such option in the mail settings.
Who is your email provider? Is it a POP or IMAP account? So you also have a computer set up to access that email account? If so, if the mail client on the computer is set to use the POP3 protocol, it may be deleting the mail from the server as it downloads it. That is the default behavior with POP3.

When importing songs, a title listed at 6:38 will chow in itunes as being 28:00 Why? How can I fix this?

I was importing songs to my main playlist, when a song that is listed as 6:38 in my downloads file entered "28:00"...Why did it do this and how can I fix it??

It seems to be working now. I noticed it kept crashing on the same song so I just deleted the file and now it's processing the files. I guess the song was corrupted or something. So far so good...

Editing some photos on a MacBook, I get them on the Photo Stream on my iMac. Having set "automatically import Photo Stream to Library" in preferences, I still don't get them in the iMac photo library. How can I achieve this?

Similar Messages

Maybe you are looking for