Editing starting only with a n audio track

Is it possible to start with an audio track and add different from different angles into the audio track so that the lips will be synced to the audio track.

This is the way I would do it:
1. Put master audio in the first two tracks.
2. Disable the patch panel for more audio.
3. Create a total of three (3) Video Tracks.
4. Put the first camera in the First track.
5. Put the second camera in the second track.
6. Put the third camera in the third track.
7.Turning the visibility on and off for each camera, sync up the video and audio for each camera.
8. Turn overlays on.
9. Select the blade tool and cut wherever you want to have the camera switch. (For example, If you want the first track to show through, cut the two above it for the amount of time you want the first camera to show.)
10. Lower the opacities for whatever camera (or track) is hiding it. (For example, if you want the third camera showing, don't lower anything, its on top.)
11. Do this as much as you want.
Ask any questions or just ask me to clarify on something.
- Craig

Similar Messages

Can quicktime play an video track with multiple alternate audio tracks?

Hi,
If I have a video track with multiple alternate audio tracks (say different languages), can a user select the audio track of his choice and play in Quick time?
Thanks,
Apurva

Does quick time/ safari have this capability?
QT (i.e., the QT structure embeded in current Mac OS/device IOS versions) has the ability to switch between alternative audio tracks assuming the file is properly encoded and the compression format is supported. QT 7, QT X, iTunes, and similar app player GUIs can switch between such tracks during playback but the QT plug-in cannot. In a similar manner, devices like TV can switch between such tracks but an iPhone cannot just as an iPhone can select "Chapters" but the QT browser plug-in cannot but an iPhone file programmed with both chapters and alternate audio tracks can be played back through a TV device and access both chapters and alternative audio tracks.
What I want to use is one video track with alternate audio tracks in a set level manifest and play this using HTTP Live streaming. I'm using the manifest mentioned here :
http://tools.ietf.org/html/draft-pantos-http-live-streaming-07#section-8.7
Since I do not use playlists, I am not familiar with the approach in your example. If I want alternate audio and/or video tracks, I create standalone video files with these features built in. Nor do I use RTSP if that is what you mean by "live streaming" of content. If I want to "stream" the content, I use "Fast Start" files programmed to open in the QT player app which supports these features or create reference or QT Media Link files that do the same thing.
As you mentioned, Safari on my iPhone is playing the default/first alternate audio track mentioned but not giving an option to switch tracks.
Neither Safari nor the Video app GUIs on your iPhone have a built in switching option. The only way to switch to alternate audio tracks is to do so with QT 7 Pro or possibly iTunes before loading or streaming the video file. (Am still speaking about a standalone file here and not a programmed playlist/RTSP switch.)
However Quick time on my Mac machine only plays the audio with the the video stream and not the alternate audio track.
The QT player app GUI only switches between tracks that are stored as part of the standalone file. Basically, QT files may contain up to 99 individual data tracks. In alternative audio videos, multiple audio tracks are added to the file by an editor like QT 7 Pro but only one track is designated as "active." All other tracks are designated as "inactive." The QT player GUI allows the viewer to select which audio track he or she wants to hear and then turns off the current audio track and turns on the selected audio track. Otherwise all active tracks would play simultaneously.
Is there a way to switch tracks on my iPhone on Safari?
As previously noted, the default track can be manually changed by QT 7 Pro or, I believe, iTunes (used to have this capability) before actually loading or streaming content.
Does quicktime have this capability?
As far as I know, only with regard to stand alone files programmed with multiple alternate tracks. I am not a HTML, HTML5, or Java programmer so I assume there may be web alternatives here but they would be beyond the scope of my expertise.
Do you know any free player that can do this?
Again, I don't use either playlists or RTSP so I've never had a need to look for/use alternative players that might meet your needs. I simply find it easier to build files that work correctly in current player app/device GUIs already having these capabilities.
Or the very last option, can I build a player to do this? If yes can you suggest where/how I start?
Once again, I assume this might be possible but not part of my experience since, for my part, easier work flows are available.

Lotto.nl will not starts, only with MS explorer

lotto.nl will not start, only with microsoft explorer on my laptop asus x 51 series

Dear Smith_123:
Thank you for your reply. However, Office had never been previously on the OS as it was never purchased. I do have Office for Mac 2011 but that is 32 bit and is not on the VMWare / Windows side of the machine. But even if I had, I would not know
how to clean up the residual file or registry keys without assistance.
After 1 hours and 20 min on the phone last evening and being handed from person to person through literally 9 different people, I finally reached someone that seemed knowledgeable in MS Support. But all they would give me was a circular answer:
We can't help you because it is a Trial Version for which there is no support offered. When I explained I wanted to be sure Visio worked on my machine prior to spending between $300 and $600 on a copy, Support could only say that I would have to purchase it
first before they would give me any help to see if it works. When I offered to purchase it right then since I had finally gotten to someone who appeared as though they could help, he told me that he was Support and not Sales so I would have to go elsewhere
to purchase the product. Very frustrating.

Creative cloud starts only with white background, so I can´t install anything. My system-Windows 8.1-

Since today my Creative Cloud starts only with white background and nothing else. I reinstalled it two times, but the Problem still excists.
Thx for help
BP

Hi,
Please try this--
1. Quit the CC Desktop application by clicking on the 'Tools' icon (top-right) and choosing quit from the drop-down.
2. Go to C:\Users\<username>\AppData*\Local\Adobe and rename OOBE folder to OOBE.old.
Launch CC Desktop application again.
*AppData is a hidden folder.
Let me know the outcome.
Regards
Sarthak

Can one video track play with 9 different audio tracks?

If we create a dvd with a 20 mins voiceover video in 6 chapters, but there were 9 language versions inc English, could we use the same video track, playing with a different audio track for each language, to save space?

Almost. You have have 8 audio streams (AS) so you'd need to have 2 tracks and split the audio across them. So you could have Track 1 8x AS and Track 2 1x AS. T1 5x AS & T2 4x AS. You get the idea...
You dont need 1 Track per Track but you will need at least two. Keep an eye on your total bandwith for each track also. Remember to budget for the audio before you encode,
-Jake

How I can unlock an encryption on my macbook pro ? device is not starting only with sos sound & black screen I don't know what should do ?

how I can unlock an encryption on my macbook pro ? device is not starting only with sos sound & black screen I don't know what should do ?

You have to take the computer to the Apple store.
http://support.apple.com/kb/HT4790
Best.

Multiple video tracks with the same audio track

How do I get DVDSP to play the same audio track on 3 different video tracks without having to repeat the audio on each of the 3 video trax?
Seems simple, but I can't find an easy way to do it.
Anybody got any ideas?

Yes they are all one continuous stream with the same GOP structure and everything. I had to export them as QT movies from FCP to get them all the same. I only exported the video though becuase the audio was going to be the same for all the tracks, & it was already done as AC3 through Compressor. Which brings up an interesting question; why does DVDSP convert the AC3 audio to .aiff which is a much larger format?
I'm trying to go back and look at the encoding log from DVDSP to see what error it gave.
It doesn't give the error in the log since I had shut down my computer last night, so I guess I'll have to try the build again and see what error it gives.
I'm looking at the parsing files and .m2v files that DVDSP did during the build, and it parsed all 3 angles, and finished the .m2v file of the medium shot, including 6 minutes past the point I told DVDSP to stop it. (When exporting the QT movie from FCP, I had forgotton and encoded the whole 2:30:00 show instead of the 1st 1/2 of 1:16:47:15, and then just adjusted the end of the clip in DVDSP).
The wide shot and Close up .m2v files, and the audio .aiff file were in the folder, but have nothing in them. The Video_TS folder and Audio_TS folder are also there, but with nothing in them, so whatever happened, seems to have happened in the medium shot encoding process.
I'm pretty much over this multi-angle thing, and I'm going to start working on an edited version of this today because all I have to do is make the cuts between cameras, since the audio is already mixed. However, if you have any other ideas, please let me know.

Issues with 'Mute' in Audio Track

Hi All
1. Using Premiere Pro CC (Fully Up to Date)
Was wondering if I could get assistance with what I believe is an issue with the Mute Button in an Audio Track. Firstly my understanding is that, if I use the 'Mute' button either in the Audio Mixer or the icon in the Timeline to mute a clip or track, it is only a temporary action and once you uncheck mute the track reverts back to it state before the Mute.ie normal audio. I have been doing some voice overs directly into the timeline using a USB Microphone / Headset and on those occasions have gone through the steps of Arming, Solo (The Voice Over Track) and then record. I am not sure if this is related but just included to give a background. When checking the levels and doing a bit of fine tuning I find the following issue. As the play head moves along the timeline if goes into a Mute condition and also appear in the Audio Mixer as Mute. It is though it is seeing a 'key frame' that tells it to mute at that point, hence my earlier question regarding (when Mute, is it temporary). I immediately uncheck Mute but when I recheck over that area of the video it is On/Off On /Off. I have tried to see if there are 'key frames / markers that indicate start and end of "Mute' in that Audio track but no luck.
Am I correct in the assumption that mute is a temporary action and should not be a permanent action at that point, or have I done something to create this issue.
Thanks for any advise.

I just read some related threads and I am beginning to suspect the action of the 'Solo' function could be causing the issue. I can not say for certain but I did some other VO in another sequence in the same project and only used the 'Mute" in the other tracks, not using Solo didn't seem to have this issue. Then I did a bit of reading in an earlier CS3 manual that advised using 'Solo' now I seem to have this issue. I totally agree have tried different audio, removing area of offending audio but still comes back??????

Merging video with an offset audio track

This is driving me nuts.
I want to merge a quicktime with an audio track, but I want to have the audio track to start playing at a specified time offset. So given a .mov file and a .wav file, combine the two files and have the audio start at something like 1 second in.
I can't seem to get this to work (though I can easily merge the two files). I would really appreciate any pointers in this regard.
Best Regards,
- Rob

Thanks for the response. While this would work I prefer do do all of this work in code (which of course is more complicated) mainly because the delay period is dynamic.
One solution I came up with was to create a custom effect (modified from the "Gain Effect" example) to insert the blank data in the buffer which then gets merged with the video track.
This works, but I'm wondering if there are better ways of doing this. If you have other solutions I'd really like to hear them.
Thanks!
- Rob

Using MPEG2 video with 2 stereo audio tracks

Hi.
I am using MPEG 2 files that have 2 audio streams, each stereo. When importing to Premiere CS5.5, only first stereo pair is used, i cannot get the second stream. Is it possible to fix this?

A production company in my city gave the files to me, but I don't know with what software they are recorded.
When i check the files in Gspot (http://www.headbands.com/gspot/v26x/index.htm) they are OK, it founds two MPEG1 layer2 stereo audio pairs.
Also, if I play the files in VLC i can choose from Audio Track 1 and Track 2.

I want to make a copy of slide show create from my own photographs and with a an audio track behind them. I have carefully followed the iDVD tutorials and burnt the result to a disc but image quality is very poor. What is wrong?

I want to make a DVD of a slide-show with an audio track behind the photographs. I have carefully followed the iDVD video tutorials but the result is far from satisfactory. The quality of the images on the resulting DVD are blurred and indistict although the original photographs are of a very high quality. Where am I going wrong? Would I have better results from a different program than the inbuilt iDVD and if so so what programs have others found to be better? I should be grateful for some expert guidance.

Hey Falcopebo,
Thanks for using Apple Support Communities.
Looks like you have image quality issues when using iDVD to burn.
iDVD 7.0: Burned DVD has interlacing, pixelation, or image quality issues
http://support.apple.com/kb/ht4078
A standard DVD made by iDVD is made to the standard DVD resolution of 720 X 480, which is smaller than most HDTVs and monitors. When expanded to fit the entire screen or monitor, the image will distort slightly due to upscaling to fit the screen or monitor.
Have a nice day,
Mario

Can't export quicktime with 5.1 audio track - help

I have a very unusual problem that I am running into.
A festival has asked for a Pro Res Screener vs a DCP like I am used to with a 5.1 audio mix.
No problem I figure, I grab the 6 individual audio tracks from our sound guy, mastered as 5.1 L,R,C,LF,SL,SR.
I create a new sequence, lay in my Video track and the 6 audio tracks from track 1 - 6 in the same order as above.
I setup my sequence the first time to be a 5.1 sequence, with 5.1 tracks.
I set each track according to it's placement with the little 5.1 diagram in each track.
I export using pro res, and set the audio to 5.1, L,R,C,LF,SL,SR
I figure at this point all should be good. I bring the renderd file back into premiere to check the file and create a new sequence directly from the new file.
I get 1 video track with a 5.1 audio track.
This is where things get weird. There are 5 channels in the track, however the left and right tracks have a mixture of L,R,and C, there is no audio in the C track, no audio in the LF track, very slight audio in the SL track and no audio in the SR track.
What is going on?
I have tried exporting this now about 10 different ways. Figuring that the audio tracks were all mono tracks I tried to set them up as individual mono tracks 1-6 and I just end up with a 5.1 track that has mixed L,R and no audio in any of the different channels.
I've searched the web and I'm going crazy with this. i'm about to send the project off to have it digitally mastered by someone else. this is quite ridiculous.
Has anyone experienced this problem before? I figure I have to be setting up something wrong? but what? how come there are no 5.1 templates in premiere to work from?
Thanks in advance to anyone who can help. I really hate to send this project off to someone else for such a seemingly simple task. Seriously, this is making DCP creation like a walk in the park!

Richard, thank you so much for that link. That seems to have done the trick, at least 95%. I have successfully routed all tracks to a single 5.1 file that can now be successfully exported... however, even after following his invert track trick, I am still getting nothing in my LFE track. How on earth do you rout that LFE track? Has it changed in premiere CC 2014?

HT4072 can't play video files (mp4, avi, mkv) with 5.1 audio tracks

I have two Macs, one with a mini-optical out and no audio through its mini-displayport, and the other that supports digital audio out through its mini-displayport. On either of my Macs, how can I play video files (mp4, avi, mkv) in 5.1 using Quicktime or iTunes or VLC? I've heard I need Perian. Is this true? If so, how do I configure it on either machine?
Note that when I connect the computer that supports audio through the mini-displayport to my receiver, my home theater receiver detects a PCM audio connection, but the audio I get out of my speakers is still stereo.
Both computers are running Snow Leopard. I haven't had the need to upgrade to Lion yet, but if the answer is that I need Lion do do this, I'd spend the $29.
Thanks for the help!

daedalusman wrote:
This just happened for the first time with an .mkv file I was trying to play. It started fine but then after selecting a menu option in smplayer the video disappeared. It didn't go black, the player just stopped presenting the video. In other words the player switched to audio playback mode only, the window was unable to go into fullscreen or be resized. Smplayer still works with other HD files. Deleting the config directory fixes the problem until I select a menu option, such as, setting the audio to 5.1, then the video portion disappears again.
Does anyone know what is going on here or have any ideas on how to fix this issue?
Thanks for any help provided.
that's because now mplayer they switch to libavformat demuxer for mkv and ogg and i think is a bug in smplayer because is making some configuration for files in file_settings in which is sets demuxer & co. this switch is confusing smplayer and it should be reported upstream
p.s if you actually select demuxer from smplayer to mkv it would work perfectly

When editing, I can't get the audio track to play on cue

I like to make highlight videos by first adding music,then going back and adding video and audio clips. Af first, it works smoothly but as I get 4 or 5 minutes into it, I'll want to listen to the music to try to "match up" with lyrics, it lags behind or want come on at all. Sometimes, if I just go back a few clips and then start the playback it will eventually jump in. There is no video with it, either. This really hampers my projects in later stages and drives me crazy. Can somebody help me?

I'm surprised to not get any responses. No one else experiences this or no one knows how to fix it. Please give me some feedback.

Global Track - Chords (Only selected Midi and Audio Tracks)

I am looking to have only certain Audio/Midi tracks be trsposed when there is a change of chords in the Global Track section. For example, I am going C/Am/C. At the Am point, everthing (exclusing drums) gets transposed, even the Melody parts. Is there any way to select only the tracks that I want tranposed?
Or is there a better way of doing this. Appreciate the help.
Rgds
Mark

Hi Again
I tried it out today and on the Midi tracks I found the no hassle in ticking the non transpose button. Worked great.
On the audio loop tracks I could not find the no transpose option in the inspector. Appreciate your assistance.
Rgds
Mark

Editing starting only with a n audio track

Similar Messages

Maybe you are looking for