Editing Text After Saving

I am working in Premier Elements 9. I have a number of text slides and saved my work. I went to go back to edit some of the text and I am unable to do so. I can only add new text. Is there a way to edit text?
Thanks!

You are most welcome.
PrE's Titler is a surprisingly powerful tool. It does have a few limitations, like alignment grids (has some alignment tick marks), a full zoom, and hyphenation, but it is still very powerful, especially with the use of Styles for its Text and also for its Shapes.
With Titles, one tripping point for some, is that Titler is used to create Titles, and will place them into the Project Panel for use. One can then have multiple Instances of that Title on the Timeline, and if one makes a change to one of those Instances, or to the Title from the Project Panel, that change will affect all Instances of that Title. Often, this is what one wants, though not always. If you have created a Title, and wish to use variations of that Title, but say with different Text, then you will want to Duplicate that Title, and just edit the Text in each Duplicate. There is a big, and useful difference, between Duplicate Titles and Instances of a Title. Many users do not understand those differences, and become concerned when they edit an Instance of a Title, and cannot understand why that edit affects all other Instances of that Title - that is the way that it is supposed to work. If one needs to edit just one Instance of a Title, they would Duplicate that, make the edit and replace that Instance with the Duplicate.
Good luck and happy editing,
Hunt

Similar Messages

Can you edit text after saving your file as pdf

I have recently created a letterhead in Illustrator.
Is there a way to change a person name and title after saving it as a pdf file? I heard something about creating a form in Acrobat professsional.
I need to print out a letterhead with different peoples name and title. Any help would be appreciated. Thank you.

Can you edit the text in Acrobat Reader?
Yes, if you use Acrobat Pro to save the PDF as a Reader-enabled form.
1. Create your letterhead in Illustrator (or whatever). Leave design space for, but do not create text objects that you want to be editable.
2. Save as PDF.
3. Open the PDF in Acrobat Pro. Use Acrobat's Form tools to add text fields whereever you want the end users to be able to key text.
4. Select the Enable Reader Usage Rights command in Acrobat to make the form fields edtiable in Reader. Save the file.
Recipients of the PDF can now open it in Reader, edit the content of the fields, and save the file with their edits.
JET

Having problem with text after saving...

It looks fine while in edit mode. All text is sharp and clear. After saving, all text plays back blurry and pixelated. Tried different fonts, sizes, colors, to no avail.
Thanks for you help.

This is a common feature of smartphone browsers in which desktop sites are text inflated to make the main body of text larger. This tends to break down in forums or sites that provide short summaries of articles.
You can disable or change the inflation levels in the Firefox for Android settings.
* With Firefox open
* Press the phone's menu button or the three dot button in the upper right
* Select settings (you might need to scroll the menu or select more)
* Select Display
* Select Text Size
* Press the small 'A' till the text does not shrink any more
* Press set
Future pages will not be inflated.

Unable to edit file after saving with add-in

I'm only just starting to test the Vibe add-in. Looks good so far, but I've noticed one fairly important issue.
If I start with a new file and save it for the first time, all is well from within MS-Word. I can save, continue editing, and save again. However, if I then login to the Vibe site I can't actually edit the file, at least not immediately, nor can any members of my team. As of now, the two test files I've created cannot be edited on the Vibe site.
Of course, I realize that the add-in is beta, but I just thought I would bring this up. I'm also wondering if anyone else has observed the same behaviour. Thanks.

This is the vibe file edit applet, right?. Not sure this has to do with desktop. Seems to be you are having problems with the editor on linux and mac. Can you upload a file without using desktop and test editing that? I think maybe you are having some of the problems described in the readme with the vibe edit applet.
What are you expecting to happen when you click on edit in linux?
6.7 Restrictions on Applet Support
Applets are not supported on 64-bit Firefox on a system with a Java Runtime Environment (JRE) earlier than 1.6.0_12.
On a 64-bit operating system, updating to JRE 1.6.0.12 or later enables the applets to work.
For example, multi-file drag-and-drop from the desktop, file paste from the desktop, Edit in Place, and the graphical display in the workflow editor do not work where applets are not supported.
6.8 Edit in Place Support for Mac Users
For Mac users, Vibe looks for OpenOffice.org in the following directory on users Mac workstations:
/Applications/OpenOffice.org.app
If your organizations standard location for OpenOffice.org is in a different location on users workstations, you can reconfigure Vibe to look for OpenOffice.org in your preferred location.
1.
Change to the following directory:
Linux:
/opt/novell/teaming/apache-tomcat-version/
webapps/ssf/WEB-INF/classes/config
Windows:
c:\Program Files\Novell\Teaming\apache-tomcat-version\
webapps\ssf\WEB-INF\classes\config
2.
Open the ssf.properties file in a text editor.
3.
Locate the block of lines that start with:
edit.in.place.mac.editor
4.
Copy that set of lines to the clipboard of your text editor.
5.
Open the ssf-ext.properties file, which is located in the same directory as the ssf.properties file.
6.
Paste the block of lines you copied at the end of the ssf-ext.properties file.
7.
Edit the location of the OpenOffice.org software to reflect its location in your organization.
8.
Save and close the ssf-ext.properties file.
9.
Close the ssf.properties file without saving it.
10.
Stop and restart Vibe to put the new software location into effect on your Vibe site.

HT2506 Problem with highlighting - scrambles PDF text after saving

Hi,
I've been having an issue with a PDF which becomes partly scrambled after I edit it (highlighting) and save it. I have tried to find information about this problem but haven't come across anything similar (please redirect me if I am wrong).
The 'scrambled' text is actually a bunch of numbers and symbols.
For ex, the text 'Whether the supervisor is contactable to be able to re-arrange the meeting' now shows up as this:
It seems this is only a display problem as when I select this section and copy paste it elsewhere, it then shows up normallly.
Not all the text is scrambled. It seems to be mainly headings, which all happen to be in bold.
Does anyone know how to stop this from happening?
Cheers.

Does this happen with all PDF's, or only one? If only one, the file is corrupt.

Editing text after designing a new form and converting it in to pdf

I designed a form and converted it in to PDF format for printing. The form has some formatting errors and needs to be edited. However attempt to do so results in a message stating that it is a secure documents and can not be edited. This is inspite of the fact that I have not placed any security restriction on it or on the folde in which it is stored. Can anyone help?
Moneish

Hi,
Just providing some information in addition to George's reply.
The PDF created by FormsCentral, assuming you are collecting responses online, is configured to enable extended features in Adobe Reader to allow respondents to save the form. To edit the PDF in Adobe Acrobat you must use the File > Save a Copy... menuitem to create a copy of the document that is not Reader-extended.
When you have finished editing the document you should remember to re-configure the PDF for fill-in and save within Adobe Reader.
Regards,
Brian

Can't find my edited photos after saving them

I have been using Elements 5.0 and recently I'm having a problem with the photos that I edit, (using the Photo Editor), not showing up in the folder I designate for them in Save As. Am I missing a setting that in my Organizer???

Its quite unusual. Try resetting editor preferences. Follow these steps
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.

Can't edit text using "Add text" tool

Hello, I click "Add Text" in "Content Editing" and add some text into a PDF document. Then, I save the pdf. Then, I re-open the document and I can't edit the same text using the same "Add Text" tool OR delete that piece of text.

by the way, when you said
Test Screen Name wrote:
What you are doing is adding comments, in the Acrobat sense, rather than text (which is part of the original page). Comments are separate. So try the commenting tools.
did you mean something like this: http://www.nitropdf.com/pdf/EN/Nitro_Pro_8_User_Guide.pdf under "Annotation layer and content layer" pages 251-252. Also, when I added text using "Add Text" did it go into content layer so that I was unable to edit it after saving using acrobat ?

Turned of OCR, now I cannot edit text

what am I doing wrong that does nto allow me to edit text after turnign off OCR

I'm not an Adobe tech. This isn't a forum for Adobe staff.
How is the PDF made? Can you select text in the PDF?
What do you mean by "creating problems with the text in formation".

I have created a form in InDesign, exported to a pdf, created an editable form and saved. When I open the form and make changes and save, the reopen the changes are there. If try to email this form as an attachment after editing, the attachment is alway

I have created a form in InDesign, exported to a pdf, then created an editable form and saved. When I open the form and make changes and save, then reopen the changes are there. If try to email this form as an attachment after editing, the attachment is always minus the edits. ????

Hi chuck,
If you ave created the form and then filling it yourself and saving the form, the filled data should be there when you reopen the same form.
Can you please send the form to me at [email protected] so that I can have a look.
Regards,
Rave

Images edited in Photoshop not showing up correctly in Lightroom after saving

Hi,
I recvently got Adobe cloud and upgraded from Lightroom 3 to 4. Since the upgrade I have been having issues with Lightroom not correctly displaying images edited in Photoshop. Instead of the photoshop image it creates a new jpeg and displays that in the library. the PSD does not get loaded into the library.
I am taking a jpeg from my library and shoosing the edit in Photoshop function. I am selecting edit a copy, but have tried it with original and with edit a copy with lightroom adjustments as well with the same results.
In Photoshop I am duplicating the base layer, upscaling the image, running some filters, adding dsome adjustment layers.
I save the image in Photoshop format back to the original folder where the initial jpeg was in the Lightroom library. I save it with maximize compatibility on.
When I go back to Lightroom, the catalog displays two files, the initial jpeg and an identical copy to it, NOT the new photoshop file with alterations. If I go to the folder the images are housed in in Finder using the show in Finder command both images link to the same original jpeg. The photoshop edited file is there in the folder but does not show up in Lightroom unless I drag and drop it.
I have turned off all filters and made sure the sort is sorting by name. The image does not automatically show up in Lightroom after editing. Any suggestions?
Thanks for any help!
PS. I did search the topic and there are threads from 2007 and lightroom 2 but their solution was to start from scratch essentially and I have a carefully tagged, starred, and labeled catalog of 30,000+ images and really don't want to do that

Images that are edited in Photoshop will be displayed automatically in Lr only when the image-file saved in Photoshop is the same as the one opened from Lr.
You say you open a JPG from Lr, then edit it in PS by - among other things - adding some layers. Layers are not supported in the JPG-format so you have to either save it as a psd or as a jpg-copy.
In either case this is not the same image file as the one opened in Lr, so it will have to be imported into Lr to show up. If you would flatten your image after editing in PS and then do a <save> to your JPG - not a <save as> - it will show up in Lr.
PS: the only exception is when you open a Raw image from Lr in PS and you save it in PS in the file format specified in Lr for external editing. The saved file will automatically show in LR.
Message was edited by: web-weaver; PS added

InDesign CC: Text in editable text fields disappearing after exporting

Hi,
I'm having an issue of text disappearing from editable text fields after exporting the document as an interactive pdf. I've created the text that needs to be editable in acrobat with InDesign CC. So for example, I want to have an editable text field that already says "I'm Mary." I want users to have an ability to change "Mary" to "Tom" or "Ben" in Acrobat. So the pdf should have an editable text form saying "I'm Mary" sentence when users open the pdf in Acrobat. However, after exporting, the text fields remains but the text itself "I'm Mary." is gone. I don't understand why this happens because the text is there when previewed in SWF preview window in InDesign.
The below is the list of steps I took.
STEP 1: Create some texts (For example, m with the text frame tool in InDesign CC
STEP 2: Right click the frame, and click on "Interactive > Convert to Text Field"
OR
STEP 2: Select the text frame, open "Buttons and Forms" window and change the type as "Text Field"
STEP 3: Export the document as an interactive pdf. The setting is default.
Result: When I open the pdf in Acrobat, the text field is there, but it is blank.
Please help me to resolve this issue. I know this is possible because a person before me at my job did it.
Thank you!

As far as I know, to have a pre-populated text form [I'm Mary] appear in the text field, you will need to set the Default Value of the text field in Acrobat. You can do that by selecting the property of the field > Options > Default Value

After saving a pdf as Excel workbook the numbers remain text and cannot be used in calculations. Is there a better way to convert into real digital numbers?

After saving a pdf as Excel workbook the numbers remain text and cannot be used in calculations. Is there a better way to convert into real digital numbers?
I have tried to convert the pdf to Word instead but same difficulty with numbers: look like numbers but not usable for calculations

Excel has a 'text to numbers' function, I would use that.
Convert text to numbers. Microsoft Excel.

Saving after editing in elements 8 - this is painfully slow, including waiting through the "not responding" message, though after quick editing in organiser saving is very quick - what is the problem?

saving after editing in elements 8 - this is painfully slow, including waiting through the "not responding" message, though after quick editing in organiser saving is very quick - what is the problem?

None of my pictures that I uploaded into iPhoto are in my Finder under Pictures. Should I copy and paste my folders from iPhoto into here, in case something happens to my iPhoto program (in addition to backing them up onto an external hard drive like I already do)?
No, that's just wasting space. A back up needs to be on a different disk.
Your photos are within the iPhoto Library.

Fields are still in EDIT mode even after Saving the Transaction in UI

Hello Experts ,
We are facing one problem in UI .
We have added the BLOCK " Subject" in Complaint transaction ( BT120H_CPL) .
We are able to fill the data in the fields for subject block like " Code, Code Gruppe etc, but even after saving the transaction these fields are in Edit mode .
Can anyone give some pointers/solution to this ?
Regards
VB

Hello,
if the fields are in Edit mode or closed is controlled by the attribute VIEW_GROUP_CONTEXT of the controller class (*IMPL).
There are also methods to change this VIEW_GROUP_CONTEXT depending on the requirement like "DISABLE_VIEW_GROUP_CONTEXT".
But as i understood you correctly you do not have a own developed view but a SAP standard view. In this case i would create a OSS-Message for the issue.
But feel free to do some debugging on this VIEW_GROUP_CONTEXT.
Best regards
Manfred

Editing Text After Saving

Similar Messages

Maybe you are looking for