Editing text on a quiz survey slide creates ghost text on the rest of the slides

Captivate 7 running on Windows 8
I have tried to delete all slides and start over, used Save As (not just Save), Forced re-published on all slides, used Advance Project Compression, and I'm saving the project as HTML5 (no, I'm not checking the box next to Scalable HTML content, since this removed my buttons).
Anyone out there know what the heck's going on?

Try turning off all Compression options, especially Advanced Project Compression. Also try changing slide quality to High 24 point.

Similar Messages

InDesign CS3 - Created ToC, now can't edit the rest of the document

I have a small document -- about 56 A5 pages, no graphics or placed files, just styled text with tables -- in which I created two new pages after the title page and created a Table of Contents for insertion in them.
I applied a new Object Style to the ToC text frames to drop them to two columns -- the rest of the document is in one column.
Now I can't access any of the document for text editing except the Table of Contents. I can select any of the text frames with the selection tools, but as soon as I go to the text tool the cursor jumps to the end of the ToC. If I try to edit it in Story Mode, only the ToC text displays.
What am I doing wrong? How do I get at the rest of my document for editing? I haven't experienced this behaviour before at all.

OK, I found out what was going on.
When I inserted the ToC, it overflowed the two pages I had alloted for it before I reset its text frames to 2 columns. As a result, it created a bunch of extra text frames on top of the existing copy.
When I reconfigured the ToC text styles to fit its two pages, those text frames were left behind, but invisible -- whenever I tried to edit text on those pages, I was actually inserting the text cursor into these invisible text frames. Once those extra frames were deleted, I could get at the underlying frames directly again.
I worked this out when I discovered that I could get the cursor into text on later pages and then page-up into the pages that had been overlaid.
I haven't yet found any way of seeing what objects are on a given page apart from just looking at it, so I don't really know how to avoid this issue in future.

How can I make my question slide look and act like the rest of the project?

Hi,
I have created my project without using a template. Each time I needed to create a new screen I simply duplicated the slide and then inserted new text. This worked quite well. However, when I tried to do this for a question slide, it wouldn't let me (obviously).
Is there a way of customising a question slide to look exactly like the rest of my project (and have the interactivity on the slide that the rest of the project has)? When I tried designing a new template and question template side and applying it to the question slide in my project, I could only insert a static image as the background on the template slide. Needless to say, there was no interactivity on the slide, i.e. no active click boxes etc, and I couldn't add these either when I applied it to the slide.
Any help is much appreciated. This is for a Masters project, so I'm still learning the basics.
Thanks.

Hi Lilybiri,
I am using Captivate 4. All of my screens so far look like a website - with menus and makeshift spry menus (image maps with click boxes). My preference is to use this layout for the question slides. However, it sounds like this isn't possible. What do other people do to make their question slides look a part of the course?
Thanks.

Change the background color of a particular word without changing the background color of the rest of the text in a textbox

Hello,
I'm designing my own website and want to know how to change the background color of a particular word without changing the background color of the rest of the text in a textbox. If i can't do this, how can I create a Table, similar to Excel with iWeb?
Thank you very much!
Roger.

If i can't do this, how can I create a Table, similar to Excel with iWeb?
Read this :
     Create and add a TABLE in iWeb »
     More about a TABLE in iWeb »
     Sample 1
     Sample 2

Is it possible to edit spoken dialog without interfering with the rest of the sound?

I'm trying to piece together video clips from various movies, and in one of these clips the character swears strongly a couple times. Normally, I don't bother with this, but my audience is that of a "clean" nature and is strongly against profanity. Is there a way to briefly mute, or change the character's voice when he cusses and not interfere with the rest of the sound? Or is this asking too much?
Also, I looked in the "help" section and couldn't find anything to help me with this. But I have a bunch more questions. Where do I go that will explain all the features of Premiere Elements 8, without forcing me to spend hours figuring it all out and/or posting a billion discussions here in the forums and bugging all of you with my lack of knowledge?

What you are attempting to do requires a bit of work and then some luck.
It sounds as though you have an Audio Clip with both background noise and possibly music, plus dialog. You wish to remove just the dialog in a particular spot, or spots. Is that correct?
If so, then in an Audio editing program, like Adobe Audition, you can possibly extract the ambient sound/music with a Karaoke Effect, or with the application of EQ. This will yield a separate file with hopefully just the background and music, and no dialog. In a Multi-Track Session, place both files on a separate Track. Find the point where you wish to remove the dialog. Here, the workflow might differ, but I'd Cut out the dialog at that point, leaving only the Karaoke Track. To clean things up, when I had done this for each offensive passage, I would go to the Karaoke Track and do just the opposite - Cut out all that was NOT underlying the offensive passages, but leave a bit of that Track before and beyond the deleted dialog. Then, I'd add a Cross-Dissolve for Constant Power to those Karaoke segments to "ramp" the Karaoke Track into the mix, as it will never be perfect, and one wants as smooth a transition, as is possible.
Now, one can do this in other audio editing programs, that offer Multi-Track editing, and also VST plug-ins, or install with Effects like Karaoke and/or Parametric or Graphic EQ's. You could explore the great, free audio-editor, Audacity, and Google for VST's that will enhance its capabilities. Be sure to read the Help files on Audacity, as one does need to do a few things in setup to allow the addition of more VST's.
The work will be with the Karaoke (or similar) Effect, its result and also the frequency ranges of the speaker. That is where the "luck" comes in. Much human speech can be EQ'ed out, or at least greatly attenuated. Now, if you have a crowd talking in the background, or similar, and wish to retain that, all bets are off.
Also, if you only have ambient sounds, and no music, behind the speaker, just find segments of that ambient sound, where the speaker is not talking, and use that to "patch" where you cut out the dialog.
Good luck,
Hunt

I am on a shared computer with several profiles. I had to delete my profile and create a new one. Now, my question. It transferred to Purchased Items to the new iTunes, so how do I get the rest of the songs to transfer to new iTunes?

I am on a shared computer with several profiles. I had to delete my profile and create a new one. Now, my question. It transferred to Purchased Items to the new iTunes, so how do I get the rest of the songs to transfer to new iTunes?

It sounds like you might have broken links to your content. Either repair these by putting the files you've recovered where iTunes expects to find them or delete the broken entries then go to iTunes Store > Purchased > Music > Not on This Computer, and click the download links.
If you have an Apple device see also Recover your iTunes library from your iPod or iOS device.
tt2

Creating that blur using my brush my entire image changes too and becomes blurry. Not only that but the area I painted also becomes over exposed. What can I do am I missing something here all I want is to blur a section and not change the rest of the area

Creating that blur using my brush. When I paint the area, which highlights in red, I bring the clarity down to create more of that blur but what ends up happening is that my entire image changes too and becomes blurry. Not only that but the area I painted also becomes over exposed. What can I do am I missing something here all I want is to blur a section and not change the rest of the area I am painted by automatically becoming over exposed. Does anyone else have this problem that can help me?

Quote
Do you think I should try to find a cheap mobo to OC my current CPU? How about trying to find one (mobo) used? I fear that my only realistic choice will be to scrap the CPU and eventually buy a new mobo and CPU, but as the CPU was only released just under two years ago I would value being over to overclock it with a cheap enough mobo to last me another year or so.
Who knows what additional problems may be run into by switching mainboards & such. The OS would have to be reinstalled fresh, etc. Money wise, it wouldn't make a lot of sense to invest more into a system that is rather outdated. The small performance gain making the switch to another board using the CPU you have, just doesn't really make much sense, especially if what you have now is completing the tasks asked of it. Save up some money, set it aside for a future build. There are plenty of new platforms in the works.

Editing a post with '#' cuts the rest of the line

I don't know if it my error,
When I edit a post where inside there is a #(pound character) trailers character after it cut off. (It happens, above all, in links)
Is it my error? if yes, how can avoid it?
and excuse me for simply question,
How can I write a link as questo link instead of http://.........
what are character prefix; before and after
Thanks for help
Regards

Ok thanks anyway I solved.
I found answer from PaulM. (thanks Paolo)
I just wondered how I can post links in these messages. I saw other people doing it. So instead of typing the URL making it a real hyperlink like in a normal html page.
Editing a post with '#' cuts the rest of the line
[url http://forums.oracle.com/forums/post!reply.jspa?messageID=1793743]This thread
[url http://forums.oracle.com/forums/post!reply.jspa?messageID=1793743]This thread[url

Problem with text size on search pages, too small, the rest of the computer is good

the text and the images on the computer is in a good size in general, but on search pages in Firefox is too small, sometime it starts larger and then turn small in a few seconds ..... on facebook page the text is ok in size. How can we increase the text size permanently?

Hi! Please have a look at the following article for information on changing text size:
[[How do I use Zoom?]]

My cover image is bigger than the rest of the document created in word. How can I fix this?

I'm working on creating an ebook. I created my cover in Canva and downloaded it as a jpg file. The rest is in word. When I combine the two into a pdf file though, the cover image fills the screen and the word document shrinks. The whole goals is to have everything the same size page since it will be read on ereaders. How do I fix this?

Best and easiest fixed in Word. Place the JPG on a new page 1 of the Word document, scale it there.

HT3412 Last night I proofed my book before ordering. Larry L. was a great help. Now I need to insert text under two pictures but have not been successful. The rest of the text in the book is visible.

Last night I proofed my book before ordering. Larry L's directions were perfect. How do I correct for the missing text. All text shows with the exception of two pictures. Don't want to order the book without the text.

Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file delete the contents the following folder:
User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.

Washington Post articles and opinions do not display the body of the text even though the rest of the page displays correctly.

Washington Post articles and opinions that are clicked on in my email, no longer display the text of the article or opinion. This is a recent development and may be caused by a Firefox upgrade as I did not previously have this problem. The problem does not exist for Internet Explorer. The webpage displays the top part of the page and the links and advertisements on the right side of the page but shows only "white space" where the article or opinion text would regularly be displayed. No error or problem message is displayed. A page refresh does not correct the problem. I am using an IBM ThinkPad laptop running Windows XP with all updates installed and Mozilla Firefox with all updates installed. HELP!???!!

When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
(You also can clear Firefox's cache completely using:
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now")
(2) Remove the site's cookies (save any pending work first) using either of these. While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?
Some sites now try to detect ad blockers and may be sensitive to other add-ons... A standard diagnostic to bypass potential interference by extensions (and some custom settings) is to try Firefox's Safe Mode.
First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, restart Firefox in Firefox's Safe Mode ([[Safe Mode]]) using
Help > Restart with Add-ons Disabled
In the dialog, click "Start in Safe Mode."
If the site works correctly, this points to one of your extensions or custom settings as the problem.
Any change?

When do the rest of the world get the ink and slide

hi on the worldwide presentation of the latest cc we were also told about ink and slide and at the end we were told everything was Now available
so why is ink and slide only in the us
when does it come to the rest of us
Tricia

Can I preorder?
I have just bought a WACOM 13HD is ink and slide comparable? A huge investment
Is the UK price going to be $199 or are UK designers going to have to pay more ie £199+?
Thanks
Tomas Grum for Annexdesign.co.uk

Creating a fixed menu while the rest of the site scrolls

I want to create a 2 column page where the left column is a menu and doesn't scroll, while the right side holds text/pictures and does scroll (no scroll bar needed, though). An example can be seen here: http://hack.acmwsu.com/
Any ideas of how I can do that?
Thanks!
EDIT: Nevermind, I figured it out.

The solution -- for others who may be searching this forum -- is to apply position:fixed to the division holding your menu.
Below are some examples:
http://alt-web.com/DEMOS/CSS2-Sticky-Footer.shtml
http://alt-web.com/DEMOS/CSS2-Sticky-Text.shtml
Fixed header, footer and sidebar
http://alt-web.com/TEMPLATES/FixedLayout.shtml
Nancy O.

I am getting a 6 soon. But need to back up my 4S. I have two problems: one, I cannot get the rest of the videos off my phone. two, I have no plus or edit button in contacts and cannot delete or fix and bad numbers. Help

Actually, I have three problems. I had to turn off iCloud because every time I turn it on, it wipes out all my contacts. Thankfully they're on my macbook and I was able to text them back to the phone. Honestly, this is making me batty. All I want to do is preserve my information before the new phone comes in. I did do a back-up to iTunes, but will that bring all the problems over to the new phone?!?
First? I tried to edit a contact today. No edit button. Then I thought, I'll just add her. No plus sign.
Last but not least? I have a LOT of memory being taken up on my 16 G 4s with videos that iTunes and iPhoto refuse to see. I can't even figure out how to see the folder on my iPhone when it's plugged in.
Help!

lisab101,
We appreciate you reaching out to us. We greatly appreciate the feedback that you have provided us. Please know that we will lift this up to management and the issues will be addressed.
Thank you,
RobinD_VZW
Follow us on twitter @VZWSupport

Editing text on a quiz survey slide creates ghost text on the rest of the slides

Similar Messages

Maybe you are looking for