Editing the Customer Address using Open Interface

Hi All,
The requirement is to edit the address details(postal codes) of the customer using Open Interface and not the APIs.
They are insisting on using open interface as the Vertex validation(Taxation rules) is taken care only by Open Interface.
Will need help on this.Kindly advice.

Please refer the following whitepaper
https://metalink2.oracle.com/cgi-bin/cr/getfile.cgi?p_attid=67196.1:1
Thanks,
Anil

Similar Messages

Enabling eRecord for standard WIPMOVE in the custom form using wip interfac

Hi,
Anyone know how to trigger the eRecord for the standard WIPMOVE transaction in the custom form using WIP Interface (wip_move_txn_interface & wip_movproc_pub.processinterface).
I have done all the necessary setting and eRecords is getting generated in the standard out of box form. But when i call the same WIPMOVE transaction through a custom form using WIP Interface it is not generating eRecord.
As suggested by cookbook I tried EDR_ERES_EVENT_PUB.RAISE_ERES_EVENT, ERES.PERFORM_TRANSACTION, nothing is working out.
Any suggestion ?
Thanks,
Senthil

Hello,
It seems best to create a Service Request for this issue.
Regards, Carlo.

Edit the internal address using transaction BBPADDRINTC

Good morning,
How can i delete a ship to location from the web transaction BBPADDRINTC? I'm able to add and modify location by going to "Maintain Addresses for own company" but unfortunately, i cant delete any.

yes. there is no provision to delete them.
did you try with BUPA_TEST_DELETE report . give BP numbe of ship to address and check
SAP dont offer via web to delete this option.
muthu

Any BAPI or FM to use to update the Customer Address with change log?

Hi, does anyone have used any BAPI or FM that will update the customer address (Central Address management fields) and the change will be logged in the change history of customer master? I have tried several FM that can update the fields but none of the change will show up in the change history of the customer master.
So far, I have tried the following FM:
ADDR_MAINTAIN_COMPLETE
ADDR_UPDATE
BDC is not acceptable due to high volume of data. However, the change log is also required.
Please share any advice.
Thank you,

Hi Minami,
for chenge address use FM : BAPI_BUPA_ADDRESS_CHANGE       (SAP BP, BAPI: Change Address)
otherwise check with below FM ,for address related information
BAPI_BUPA_ADDRESSES_GET              SAP BP, BAPI: Determine All Addresses
BAPI_BUPA_ADDRESS_ADD                   SAP BP, BAPI: Add Address
BAPI_BUPA_ADDRESS_CHANGE                 SAP BP, BAPI: Change Address
BAPI_BUPA_ADDRESS_GETDETAIL             SAP BP, BAPI: Read Address
BAPI_BUPA_ADDRESS_GET_NUMBERS    SAP BP, BAPI: Read Address Numbers
BAPI_BUPA_ADDRESS_REMOVE                    SAP BP, BAPI: Delete Address
Regards,
Tutun

Error "Extend the destination address using the location input help"

Hi experts,
I got warning while creating travel expense from existing travel request.
the warning appear like this "Extend the destination address using the location input help"
I don't want user to enter detail of address trip destination.
how to avoid this?
thanks
Edited by: nzworld on Apr 29, 2011 5:42 AM

Hi,
If you are using ESS and you get the warning message when you enter details for a particular expense type. Please follow the config and hide the location details. Then you will not get this error message.
SAP Customizing Implementation Guide > Financial Accounting (New) > Travel Management > Travel Expenses > Dialog and Travel Expenses Control > Dialog Control > Field Control for Additional Receipt Information.
Enter your trip provision variant, select the expense type for which you dont want to enter the location details and then select details. Search for the variable location, select hide radio button and save.
Please let me know if you have further clarifications.
Regards,
Raj

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file ext

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. so I can reburn the films on a single BluRay disc. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file extensions on the VOB files to MPEG but this was no help. Some of the VOB files contain numerous film clips but my software does not appear to be able to recognize them as such. I need to know if replacing my old Premier Elements with the new Version 13 would solve this problem or not. Any advice would be greatly appreciated!
Bob

Bob
What do you have now.....
What computer operating system do you have?
We can go into the finer points of source and your intentions, but for now it would appear that you are using SD 4:3 source media to get to a HD 16:9 result. Lots to discuss in this regard.
What was given to you on the DVD disc? DVD-VIDEO 4:3 or something else?
If DVD-VIDEO on DVD disc, you should expect to find on the disc a folder named VIDEO_TS. That is your target for your video files.
If you were given a DVD-VIDEO on DVD disc, then all you want from it are the video files, specifically
VTS_01_1.VOB, VTS_01_2.VOB, and so on through that series until possibly getting to
VTS_02_1.VOB, and so on. How many files you have beyond the VTS_01_1.VOB file will depend on the size of the DVD-VIDEO.
Does the above scenario apply to you?
The alternative might be someone giving a DVD disc (data disc) which contains just the VTS files mentioned which were copied from
the VIDEO_TS Folder. So, you do not get the whole VIDEO_TS Folder, just the essential video files. Does this scenario apply to you.
I see no need to replace your Premiere Elements 4 with a later version unless you have a huge project and need a later version that will be a 64 bit application running specifically on Windows 7, 8, or 8.1 64 bit computer.
Consider...Premiere Elements 4 and if you have DVD-VIDEO on DVD....
1. Place the DVD disc in the burner tray
2. Open Premiere Elements 4 and set the project preset for NTSC DV Standard (assuming you are working in a NTSC setup)
3. Go to
Get Media
"DVD, Digital Camera, Mobile Phone, Hard Drive Camcorder, Card Reader"
"Adobe Premiere Elements - Media Downloader" and its Advanced dialog.
Set the Source in the latter dialog for the drive which has your DVD disc inserted in its tray
You should see your VTS_01_1.VOB thumbnail in the "Adobe Premiere Elements - Media Downloader" Advanced dialog.
With this VOB selected, click on Get Media to get the file from there into the project.
Should work fine.
Complications may be involved if the people who processed your footage gave you something other what is described above.
Please review and consider, and then we can plan our project strategy accordingly.
Thank you.
ATR

How can I change the email address used to authorize my computer?

I borrowed ebooks from a public library using a different email address which I should have used to authorized my computer hosting the adobe digital edition. Is there a way to modify the email address used to authorize my computer as I get an error message when I try to return the books. Thanks

This says it was assumed answered but where is the answer? I've gone thru the Help processes to do this but it doesn't change. The old address is still there. I have trouble returning books to the library and getting new books.

Communication between thread in the same process using file interface.

Hi,
I am developing driver and i need to communicate between two thread.
>can anyone guide me on implementing communication between two thread in the same process using File Interface. First thread will be driver and second will be application.I need to send IOCTL like commands using File interface ie is WriteFile(),ReadFile()
from Host process to driver through file-interface(which run's in driver context).Host process should not be blocked for the duration of the driver to process the command.
>File-interface will run in driver context and it will be responsible to receive command from application and pass it to the driver.
what are the complexity introduced?
>Can anyone also give me the link/reference to get more information on this topic?
>How to replace IOCTL command's for instance baud _rate change command with a file interface for example with IRP.

Here is the detailed query:
Hardware Abstraction Layer will interact with Driver(Both will be running in complete different process) .there is a IOCTL for command and File interface for read and write.
My requirement is:
Both should run in the same process so HAL will run as one thread and driver as another thread in the same process .I don't want HAL to wait for completion of request and also i don't want driver to be blocked .
We are planning to use a File Interface for communication between Hardware abstraction layer and Driver
HAL will send the command or read/write operation to a file interface and driver will get the command or read/write request from the File interface
There is a flexibility to change Hardware Abstraction layer and also the Driver
Is it possible to use IOCTL between two thread under same process? if not what other options do we have.
Can we use File interface to send command (like IOCTL) between two thread?

Using ms project 2007 and vba macro to list all the custom fields used in the project?

Hi,Using ms project 2007 vba macro, I would like to be able to list all the custom fields used in the project and their corresponding field names. e.g. let us say I create a calculated duration field and name it "expected duration" and the name
of the field I select is Duration1.
I am trying to write a macro that will list all the used custom fields such as the result would look like:
Duration1 ---> "expected duration"
Text1 ---> "anything"
Flag1 ---> "....."
Number1 ---> "..............."
Can anyone provide me with the solution?
Regards,
Chuck

John,
I found this module, which provides the the list of custom fields used in the project but does not provide the name given to the field. Here below is the module and hope you could help me achieve this by modifying the macro to list the renamed field.
' MSP Checks all Custom Task Fields
Sub checkfields2()
'This macro will check and report out which custom task fields are used
'It requires Project 2002 and above as it relies on the GetField
'and FieldNameToFieldConstant methods which were not introduced until
'2002.
'It does not include resource fields, however it is a simple matter to
'do it by replacing the pjTask constant with pjResource.
'Copyright Jack Dahlgren, Oct. 2004
Dim mycheck As Boolean
Dim myType, usedfields As String
Dim t As Task
Dim ts As Tasks
Dim i, it As Integer
Set ts = ActiveProject.Tasks
usedfields = "Custom Fields used in this file" & vbCrLf
myType = "Text"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 30
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Number"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 20
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> 0 Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Duration"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If Left(ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)), 2) <> "0 " Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Cost"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> 0 Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Start"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "NA" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Finish"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "NA" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
MsgBox usedfields
End Sub
This is what the module gives me. But I would like to have beside Text 1 the name that is shown as below. e.g Text1 is "Test".
Would you mind helping me achieve this?
Thanks in advance.
Chuck

I want to update the Custom table using the data available in ITAB.

Hi,
I want to updaste the Custom Table which is created by me (Ztable) using the data available in itab.(which i got from defferent standard tables)
I want to update the custom table using the itab data How is it possible?
Is any possible by using Modify ?
DPK.

example here
modifying datbase table useing internal table
advises before updating this datbase table plz lock that table to avoid incosistency
write the logic for modifying
Modify the database table as per new dunning procedure
MODIFY fkkvkp FROM TABLE lt_fkkvkp .
and finally unlock the table
example
*To lock table for further operations
constants: lc_tabname TYPE rstable-tabname VALUE 'FKKVKP' . "FKKVKP
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
tabname = lc_tabname
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc EQ 0.
To fetch all the contract accounts for customers of the segment
Households/SME.
PERFORM fetch_contract_accounts using lc_tabname .
ENDIF. " IF sy-subrc EQ 0.
*wrote the logic
Modify the database table as per new dunning procedure from internal table
MODIFY fkkvkp FROM TABLE lt_fkkvkp .
*unlock the tbale
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
TABNAME = uc_tabname .

How do I find the Apple ID if I cant remember the email address used to setup the phone?

I have updated my sim on my phone and now its asking me to sign in with my apple ID which I cant remember. Can this be unlocked in any other way? or how do you find out the email address used?
Many thanks

Start here: https://iforgot.apple.com/appleid

FM to change the customer address

Hi Guys,
             I am looking for FM to change the customer address.
I found SD_CUSTOMER_MAINTAIN_ALL from here.. but the guys says its dumping..
Can I get some source code with the FM.
Thanks
Senthil

Use this.
Data:gt_kna1   LIKE kna1 OCCURS 1000 WITH HEADER LINE,
       gt_bapiaddr1 LIKE bapiaddr1 OCCURS 1000 WITH HEADER LINE,
       gt_bapiaddr2 LIKE bapiaddr2 OCCURS 1000 WITH HEADER LINE.
LOOP AT gt_kna1.
        CLEAR: gt_bapiaddr1, gt_bapiaddr2.
        READ TABLE gt_bapiaddr1 WITH KEY addr_no = gt_kna1-adrnr.
        IF sy-subrc NE 0.
          READ TABLE gt_bapiaddr2 WITH KEY addr_no = gt_kna1-adrnr.
        ENDIF.
        CALL FUNCTION 'SD_CUSTOMER_MAINTAIN_ALL'
          EXPORTING
            i_kna1                     = gt_kna1
            i_bapiaddr1                = gt_bapiaddr1
            i_bapiaddr2                = gt_bapiaddr2
            i_maintain_address_by_kna1 = 'X'
            pi_postflag                = 'X'
          EXCEPTIONS
            client_error               = 1
            kna1_incomplete            = 2
            knb1_incomplete            = 3
            knb5_incomplete            = 4
            knvv_incomplete            = 5
            kunnr_not_unique           = 6
            sales_area_not_unique      = 7
            sales_area_not_valid       = 8
            insert_update_conflict     = 9
            number_assignment_error    = 10
            number_not_in_range        = 11
            number_range_not_extern    = 12
            number_range_not_intern    = 13
            account_group_not_valid    = 14
            parnr_invalid              = 15
            bank_address_invalid       = 16
            tax_data_not_valid         = 17
            no_authority               = 18
            company_code_not_unique    = 19
            dunning_data_not_valid     = 20
            knb1_reference_invalid     = 21
            cam_error                  = 22
            OTHERS                     = 23.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ENDLOOP.

HT5312 I no longer have access to the email address used as my Apple ID and when I choose to answer security questions, my DOB had to have been originally entered incorrectly because it keeps failing. How do I get rid of my old Apple ID and create a new

I no longer have access to the email address used as my Apple ID and when I choose to answer security questions, my DOB had to have been originally entered incorrectly because it keeps failing. How do I get rid of my old Apple ID and create a new one?

Contact Apple, either through the link in that article or by phoning them. Alternatively, just create a new Apple ID; previous iTunes Store purchases won't be transferred to it.
(79271)

I create an MSWord document and type a web address in it. When I click on the web address, it opens IE Explorer. I want Firefox to open, not iE

I create an MSWord or Excel document and type a web address in it. When I click on the web address, it opens an Internet Explorer window. How can I make it open Firefox, not Internet Explorer? Thanks!
== This happened ==
Not sure how often
== always

choose ff for the default browser, and the problem will be solved

HT201363 I want to change the email address used as rescue email for my security questions. But I can't remember the answers to the security questions and I dont have access to the rescue email anymore. Please help.

I want to change the email address used as rescue email for my security questions. But I can't remember the answers to the security questions and I dont have access to the rescue email anymore. Please help.

-If you established a rescue email address, there will be a link on the "Passwords & Security" page of id.apple.com. Clicking the link will send the reset to your rescue email address (NOTE: This is not the same address as your Apple ID email)
-If there is no link on the page, then you didn't establish a rescue email address. Contact AppleCare at 800.694.7466 (If you are in the US), and ask for account security. You will need to answer some questions to verify your identity, AND you will need access to a computer to generate a temporary support pin.
-If you are not in the US, click http://support.apple.com/kb/HT5699 - Apple ID: Contacting Apple for help with Apple ID account security
HTH

Editing the Customer Address using Open Interface

Similar Messages

Maybe you are looking for