Editing the MBR

I was attempting to edit the MBR in order to install Windows 7 without the use of bootcamp because I already have 2 partitions and I didn't want to change that. I was using the fdisk command in terminal in order to add a partition that windows could use to install. In the process, it changed the Starting CHS to 0-0-2 rather than 1023-255-63 as it was prior. I cannot figure out how to change these without also changing the LBA and size of the disk. I'm not sure what to do because now my macbook won't boot. I'm stuck bumbling around in terminal using my recovery disk (not something I'm very comfortable with). I just need to change it back to the default as far as I can tell. Default would be something along the lines of
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
*1: EE 1023 254 63 - 1023 254 63 [         1 - 1953525168] <Unknown ID>
But it currently reads
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
*1: EE    0   0   2 - 1023 254 63 [         1 - 1953525168] <Unknown ID>

Check out the diskutil command. Read the man page.

Similar Messages

How can two people edit the same InDesign CC document?

I am looking for a desktop publishing application that I can use to create programs for a high school choir and am experimenting with InDesign CC. I'll do most of the work creating the progam, but the choir teacher at the last moment will have changes for me or will do them herself. Either way she will be producing the final copy for printing.
In an ideal world we would be able to edit the same file at the same time, me from my office and her from her classroom, not on a shared network, much like Google Docs.
Does InDesign CC have this capability? What steps would I use to approach this problem using InDesign CC?

You can look into InCopy for text changes and put the InDesign file in a
dropbox folder.

Not able to edit the report created on different data source.....

I have a query regarding Report in OBIEE - reports developed from BI Publisher are specific to data source on which they have been created ??
i have a sample report that was created on different data source, i have the corresponding RPD also. I changed the data source according to my DB and when i try to update/edit the report,
on Analytics for adding a new column, it is generating a seperate new Query from QueryBuilder for that additional cloumn rather than adding up the new query with the previous one(existing report query). Is it because of mismatch of data source on which report had been created and on which it is being update ?? if it is the case, where do i need to make changes related to JDBC connection or others ??
when i try to create a new sample data set and try to update it, it adds up the extra edited things to original query and works perfectly fine. can ny 1 help me for the same ??

Hi Denis,
Normally,what we do is once we provide access to webi users group for each user from BO supervisor module, user(s) will able to refresh/edit the existing report from Full client BO.His colleagues have had no problem editing all his reports from their machines but he is not able to edit any report from his machine and BO is getting freeze.
He also reinstalled BO and cleaned out everything on his Computer and re-built it but the issue is not yet resolved
Can you please tell me how to resolve this issue
Kind Regards,
Srinivas

After userA check out a page, edit the page and save, Sharepoint prompt userA have checked out the page

In one of site collection at our SP2013 farm, we have "SharePoint Server Publishing" site feature and "SharePoint Server Publishing Infrastructure" site collection feature activated.
One of user (UserA) create a page in a page library. The new page is marked as "checked out by UserA". It is fine.
Then UserA open the page -> edit page -> key in something and "save". Then the page prompt him "The file Pages/subfolder/test001.aspx has been modified by i:0#.w|test\userA on 8Aug2014 xx:xx:xx" and ask him to choose "Leave
this page" or "say at this page". The date time is exactly the time he was editing the page.
Whatever he choose will save the page and return to "View" mode (non-edit mode).
It is not the only problem. When userA want to edit the same page again and save, it prompt him that "The page could not be saved because your changes conflict with recent changes made by another user. If you continue, your changes will be lost."!
When userA choose continue or "check out". Follow screen show up:
What can we do? In summary, userA cannot edit a page because userA have checked out! We have tried for different users have exactly same issue.

We are having the same problem, the one thing we have found is if we use the Save Icon on the top right hand side of the page in the ribbon (next to follow), that Save works just fine. What is causing the issue is when trying to use the Save Icon on
the left hand side of the ribbon that has the dropdown options to 'Save', 'Save and Keep Editing' or 'Stop Editing'. It doesn't matter if you just click on the main Icon or choose any of the dropdown options, they all cause issues with the pages.
Thoughts?
Nick Hurst

Not able to EDIT the data in PSA

Hi Experts,
I had created cube and it has following seeting
1) Three dimensions i.e. Employee_No, Employee_name and Time
2) Key figures i.e. Salary and Tax
Procedure What I have followed
=======================
1. Created one CSV file and it contains ten records
2. I created one file interface source system
3. I had created one infosource
4. In the change button of infosource I have included four objects i.e.
    Employee_No,Employee_name, Salary and Tax
5. I assigned data source to the above infososurce
6. By creating data package with the selection of PSA and Infoobject parallel in
    the processing button I loaded 10 records into the cube
7. Next time I tried to use same infopackage with the selection of Only PSA in
    processing button
8. Than I tried to Edit the data, but pop's with warning message "An internal error
    occured in maintenance module"
I hope some one reply to this issue.

hi,
i think it is becqause u HAVE CHANGED TO only psa option .
also u can create another infopackage and load the data
or else u can edit the data in source system instead in ps.
regards
pls assign popints if helpful.

Some of my photos in iphoto turn blank (white) when I tried to edit the size like zoon in and out.Can someone help me on this?

Some of my photos in Iphoto turn blank (white) when I tried to edit the size like zoon in and out.Can someone help me on this?

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Can I edit the size of my photo when setting up an email signature?

Can I edit the size of my photo when setting up an email signature?

Not sure what you mean by "photo screen?" Do you mean your Photo Stream?
In the Photos app there are several ways to view the photos. Tap on Albums. Your Photo Stream is one Album but there may be others including the Camera Roll, albums made on the iPad with photos from the Camera Roll, and albums of photos copied to your iPhone by syncing with your computer.
To remove albums from the Camera Roll, tap on the Camera Roll album to see the small thumbnails of the photos there. Tap on Select, tap on the photos to delete, then tap on the trashcan. The photos will then be moved to another album called Recently Deleted. They remain there for 30 days to allow you time to reconsider whether you really want to delete them or not. After 30 days they will automatically be deleted from your iPhone. But if you are sure you want the photos deleted from your iPhone delete them again from the Recently Deleted album.
Albums created on the iPad with photos from the Camera Roll can be deleted in the same way.
To delete albums copied to your iPhone by syncing with your computer running iTunes are deleted by doing another sync. But before you click on Sync deselect the albums in iTunes. Then when you click on Apply or Sync the albums will be removed from your iPhone but they will remain on your computer.

I JUST SYNCED MY NEW IPOD TOUCH TO MY ITUNES LIBRARY BUT iT WONT LET ME EDIT THE MUSIC ON THE IPOD. i WANT TO MANUALLY ADD AND DELETE CERTAIN PLAYLIST OR SONGS/

I have a new ipod touch replacing an old damadged one. I have it synced to my computer but I cant edit the songs in my playlist on my ipod or delete any playlist. I also can not create new playlist for the ipod
Can anyone help me?

Click on the iPod under DEVICES... is the "Manually Manage Music and Videos" box checked? You may have to scroll down to see it. You want to make sure this box is checked.

I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files?

I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files? What can be done so that I can either open and see the layers or how can the sender save it in a way that it doesn't "merge" the layers in some way to just one?

Could try saving as tiff provided layers and transparency are chosen at the time of saving. But it's hard to give a definitive answer as it depends on the final usage. For example PSD's tend to work better in applications like In Design in comparison with tiff.

I have created a form in InDesign, exported to a pdf, created an editable form and saved. When I open the form and make changes and save, the reopen the changes are there. If try to email this form as an attachment after editing, the attachment is alway

I have created a form in InDesign, exported to a pdf, then created an editable form and saved. When I open the form and make changes and save, then reopen the changes are there. If try to email this form as an attachment after editing, the attachment is always minus the edits. ????

Hi chuck,
If you ave created the form and then filling it yourself and saving the form, the filled data should be there when you reopen the same form.
Can you please send the form to me at [email protected] so that I can have a look.
Regards,
Rave

To edit the field in the ALV report

Hi,
    i want to edit the field of the ALV report what i need to do for that..
Thanks & Regards
Ashu Singh

hi,
check the code,
REPORT zalv_fcat.* Output table T006 structure declarationTYPES : BEGIN OF ty_t006.
        INCLUDE STRUCTURE t006.
TYPES : END OF ty_t006.*Internal table and wa declaration for T006
DATA : it_t006 TYPE STANDARD TABLE OF ty_t006,
       wa_t006 TYPE ty_t006.*declarations for ALV
DATA: ok_code               TYPE sy-ucomm,
fieldcatalog for T006
      it_fielcat           TYPE lvc_t_fcat,
fieldcatalog for fieldcatalog itself:
      it_fielcatalogue           TYPE lvc_t_fcat,
      it_layout           TYPE lvc_s_layo.*declaration for toolbar function
DATA:   it_excl_func        TYPE ui_functions.
Controls to display it_t006 and corresponding fieldcatalog
DATA: cont_dock TYPE REF TO cl_gui_docking_container,
      cont_alvgd     TYPE REF TO cl_gui_alv_grid.*controls to display the fieldcatalog as editable alv grid and container
DATA: cont_cust TYPE REF TO cl_gui_custom_container,
      cont_editalvgd     TYPE REF TO cl_gui_alv_grid.*intialization event
INITIALIZATION.*start of selection event
START-OF-SELECTION.
LOCAL CLASS Definition for data changed in fieldcatalog ALV
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
    METHODS handle_data_changed
      FOR EVENT data_changed OF cl_gui_alv_grid
      IMPORTING er_data_changed.
ENDCLASS.                    "lcl_event_receiver DEFINITION
LOCAL CLASS implementation for data changed in fieldcatalog ALV
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_data_changed.
ENDMETHOD.                    "handle_data_changed
ENDCLASS.                    "lcl_event_receiver IMPLEMENTATION*data declaration for event receiver
DATA: event_receiver TYPE REF TO lcl_event_receiver.*end of selection event
END-OF-SELECTION.*setting the screen for alv output for table display and
*changed fieldcatalalogue display
SET SCREEN 600.
On this statement double click it takes you to the screen painter SE51. Enter the attributes
*Create a Custom container and name it CCONT and OK code as OK_CODE.
*Save check and Activate the screen painter.
*Now a normal screen with number 600 is created which holds the ALV grid.
PBO of the actual screen , Here we can give a title and customized menus
*Go to SE41 and create status 'STATUS600' and create THE function code 'SUBMIT'
*and 'EXIT' with icons and icon texts
Also create a TitleBar 'TITLE600' and give the relevant title.&----
*&      Module STATUS_0600 OUTPUT
MODULE status_0600 OUTPUT.
SET PF-STATUS 'STATUS600'.
SET TITLEBAR 'TITLE600'.
CREATE ALV GRID CONTROL IF DOES NOT EXISTS INITIALLY
IF cont_dock IS INITIAL.
    PERFORM create_alv.
ENDIF.ENDMODULE.                             " STATUS_0600 OUTPUT* PAI module of the screen created. In case we use an interactive ALV or
*for additional functionalities we can create OK codes and based on the
*user command we can do the coding as shown below
*&      Module USER_COMMAND_0600 INPUT
MODULE user_command_0600 INPUT.
CASE ok_code.
    WHEN 'SUBMIT'.
*TO GET THE CURRENT FIELDCATALOGUE FROM THE FRONTEND
      CALL METHOD cont_alvgd->set_frontend_fieldcatalog
        EXPORTING
          it_fieldcatalog = it_fielcat.
*refresh the alv
      CALL METHOD cont_alvgd->refresh_table_display.
*to Send Buffered Automation Queue to Frontend
      CALL METHOD cl_gui_cfw=>flush.*Exit button clicked to leave the program
    WHEN 'EXIT'.
      LEAVE PROGRAM. ENDCASE.ENDMODULE.                             " USER_COMMAND_0600 INPUT&----
*&      Form CREATE_ALV
&----FORM create_alv.*create a docking container and dock the control at the botton
CREATE OBJECT cont_dock
      EXPORTING
           dynnr = '600'
           extension = 100
           side = cl_gui_docking_container=>dock_at_bottom.*create the alv grid for display the table
CREATE OBJECT cont_alvgd
      EXPORTING
           i_parent = cont_dock.*create custome container for alv
CREATE OBJECT cont_cust
      EXPORTING
           container_name = 'CCONT'.
*create alv editable grid
CREATE OBJECT cont_editalvgd
      EXPORTING
           i_parent = cont_cust.* register events for the editable alv
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_data_changed FOR cont_editalvgd. CALL METHOD cont_editalvgd->register_edit_event
    EXPORTING
      i_event_id = cl_gui_alv_grid=>mc_evt_modified.*building the fieldcatalogue for the initial display
PERFORM build_fieldcat CHANGING it_fielcat it_fielcatalogue.*building the fieldcatalogue after the user has changed it
PERFORM change_fieldcat CHANGING it_fielcatalogue.*fetch data from the table
PERFORM fetch_data.*    Get excluding functions for the alv editable tool bar APPEND cl_gui_alv_grid=>mc_fc_loc_append_row TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_loc_insert_row TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_loc_cut TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_sort TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_sort_asc TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_sort_dsc TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_subtot TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_sum TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_graph TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_info TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_print TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_filter TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_views TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_mb_export TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_mb_sum TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_mb_sum TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_mb_paste TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_find TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_loc_copy TO it_excl_func.
*Alv display for the T006 table at the bottom
CALL METHOD cont_alvgd->set_table_for_first_display
    CHANGING
      it_outtab       = it_t006[]
      it_fieldcatalog = it_fielcat[].
optimize column width of grid displaying fieldcatalog
it_layout-cwidth_opt = 'X'.* Get fieldcatalog of table T006 - alv might have
modified it after passing.
CALL METHOD cont_alvgd->get_frontend_fieldcatalog
    IMPORTING
      et_fieldcatalog = it_fielcat[].to Send Buffered Automation Queue to Frontend CALL METHOD cl_gui_cfw=>flush. Display fieldcatalog of table T006 in editable alv grid
CALL METHOD cont_editalvgd->set_table_for_first_display
    EXPORTING
      is_layout            = it_layout
      it_toolbar_excluding = it_excl_func
    CHANGING
      it_outtab            = it_fielcat[]
      it_fieldcatalog      = it_fielcatalogue[].
ENDFORM.                               " CREATE_alv
*&      Form fetch_data
FORM fetch_data.* select data of T006
SELECT * FROM t006 INTO TABLE it_t006 UP TO 50 ROWS.
ENDFORM.                               " fetch_data
*&      Form BUILD_FIELDCAT
FORM build_fieldcat CHANGING it_fldcat TYPE lvc_t_fcat
                                   it_fcat TYPE lvc_t_fcat.
Fieldcatalog for table T006: it_fldcat
to generate the fields automatically CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name       = 'T006'
    CHANGING
      ct_fieldcat            = it_fldcat[]
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.*----
Fieldcatalog for table LVC_T_FCAT:it_fcat
Generate fieldcatalog of fieldcatalog structure.
This fieldcatalog is used to display fieldcatalog 'it_fldcat'
on the top of the screen. CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name       = 'LVC_S_FCAT'
    CHANGING
      ct_fieldcat            = it_fcat[]
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                               " BUILD_FIELDCAT
*&      Form CHANGE_FIELDCAT
*after the user has modified the fieldcatalogue we build another fieldcat
*for the modified alv display
FORM change_fieldcat CHANGING it_fcat TYPE lvc_t_fcat. DATA ls_fcat TYPE lvc_s_fcat. LOOP AT it_fcat INTO ls_fcat.
    ls_fcat-coltext = ls_fcat-fieldname.
    ls_fcat-edit = 'X'.    IF ls_fcat-fieldname = 'COL_POS' OR ls_fcat-fieldname = 'FIELDNAME'.
      ls_fcat-key = 'X'.
    ENDIF.    MODIFY it_fcat FROM ls_fcat.
ENDLOOP.
ENDFORM.                               " CHANGE_FIELDCAT
ref:saptechnical tutorial.
Regards,
Anirban

Editing the Customer Address using Open Interface

Hi All,
The requirement is to edit the address details(postal codes) of the customer using Open Interface and not the APIs.
They are insisting on using open interface as the Vertex validation(Taxation rules) is taken care only by Open Interface.
Will need help on this.Kindly advice.

Please refer the following whitepaper
https://metalink2.oracle.com/cgi-bin/cr/getfile.cgi?p_attid=67196.1:1
Thanks,
Anil

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file ext

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. so I can reburn the films on a single BluRay disc. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file extensions on the VOB files to MPEG but this was no help. Some of the VOB files contain numerous film clips but my software does not appear to be able to recognize them as such. I need to know if replacing my old Premier Elements with the new Version 13 would solve this problem or not. Any advice would be greatly appreciated!
Bob

Bob
What do you have now.....
What computer operating system do you have?
We can go into the finer points of source and your intentions, but for now it would appear that you are using SD 4:3 source media to get to a HD 16:9 result. Lots to discuss in this regard.
What was given to you on the DVD disc? DVD-VIDEO 4:3 or something else?
If DVD-VIDEO on DVD disc, you should expect to find on the disc a folder named VIDEO_TS. That is your target for your video files.
If you were given a DVD-VIDEO on DVD disc, then all you want from it are the video files, specifically
VTS_01_1.VOB, VTS_01_2.VOB, and so on through that series until possibly getting to
VTS_02_1.VOB, and so on. How many files you have beyond the VTS_01_1.VOB file will depend on the size of the DVD-VIDEO.
Does the above scenario apply to you?
The alternative might be someone giving a DVD disc (data disc) which contains just the VTS files mentioned which were copied from
the VIDEO_TS Folder. So, you do not get the whole VIDEO_TS Folder, just the essential video files. Does this scenario apply to you.
I see no need to replace your Premiere Elements 4 with a later version unless you have a huge project and need a later version that will be a 64 bit application running specifically on Windows 7, 8, or 8.1 64 bit computer.
Consider...Premiere Elements 4 and if you have DVD-VIDEO on DVD....
1. Place the DVD disc in the burner tray
2. Open Premiere Elements 4 and set the project preset for NTSC DV Standard (assuming you are working in a NTSC setup)
3. Go to
Get Media
"DVD, Digital Camera, Mobile Phone, Hard Drive Camcorder, Card Reader"
"Adobe Premiere Elements - Media Downloader" and its Advanced dialog.
Set the Source in the latter dialog for the drive which has your DVD disc inserted in its tray
You should see your VTS_01_1.VOB thumbnail in the "Adobe Premiere Elements - Media Downloader" Advanced dialog.
With this VOB selected, click on Get Media to get the file from there into the project.
Should work fine.
Complications may be involved if the people who processed your footage gave you something other what is described above.
Please review and consider, and then we can plan our project strategy accordingly.
Thank you.
ATR

EDIT THE FIELV VALUE IN ALV GRID DISPLAY

Hi Guru ,
How can I edit the value of a particular one or two fields in ALV GRID DISPLAY .
Please reply me

hi,
1.Set status of all cells to editable using the layout structure.
2.Use SET_READY_FOR_INPUT to activate the edit feature initially.
   (state "editable activated").
3.Use IS_READY_FOR_INPUT to fetch current substate of editable cells.
4.Use SET_READY_FOR_INPUT to switch between the substates.
    CALL METHOD g_grid->set_table_for_first_display
         EXPORTING i_structure_name = 'SFLIGHT'
                   is_layout        = gs_layout
         CHANGING it_outtab        = gt_outtab.
*§2.Use SET_READY_FOR_INPUT to allow editing initially.
*   (state "editable and ready for input").
    CALL METHOD g_grid->set_ready_for_input
          EXPORTING i_ready_for_input = 1.
*Use IS_READY_FOR_INPUT to fetch current substate of editable cells.
IF g_grid->is_ready_for_input( ) EQ 0.
*Use SET_READY_FOR_INPUT to switch between the substates.
    CALL METHOD g_grid->set_ready_for_input
                     EXPORTING i_ready_for_input = 1.
ELSE.
    CALL METHOD g_grid->set_ready_for_input
                     EXPORTING i_ready_for_input = 0.
ENDIF.

Not able to edit the report from BO 5.1

Hi,
User has Business Objects 5.1 version on his machine and he is able to login to Business Objects 5.1.2 and can also open the BO reports from the required path
When he edit the report, the BO is gettng hung and following errors occured one by one when he clicks ok button
error1: "you must close this universe(name of universe) before importing it"
when he clicks OK button on this error, second error is received
error2: "Some obsolete objects have been removed from the query. (QP0027)"
When he clicks OK button on this error, third error is received
error3:"A connection required to refresh this document is unavailable(DA0004)"
I am not understanding why these three errors are receiving one by one.Please tell me how to resolve above errors and edit the report
kind Regards,
Srinivas

Hi Denis,
Normally,what we do is once we provide access to webi users group for each user from BO supervisor module, user(s) will able to refresh/edit the existing report from Full client BO.His colleagues have had no problem editing all his reports from their machines but he is not able to edit any report from his machine and BO is getting freeze.
He also reinstalled BO and cleaned out everything on his Computer and re-built it but the issue is not yet resolved
Can you please tell me how to resolve this issue
Kind Regards,
Srinivas

Editing the MBR

Similar Messages

Maybe you are looking for