Editing the start times of various songs on one playlist only?

I play music at the rink between puck drops and periods for my daughters hockey team. I usually only get between 10 and 20 seconds of music between the on ice action. I have my desired start times listed on my playlist printouts, but it is a pain in the butt to have to pause the song, slide it to the desired start time, and then unpause! It is too slow of a process.
I know that I can right click on the song, go to "GET INFO" and adjust the start/stop time in options. But I only want to have this new start time in my hockey playlists, and not permanently in my itunes library. Any suggestions would be greatly appreciated!

Can't be done the way you want. A playlist is just a list of tracks. Start/finish times belong to the track whichever way you use to access them. What you could is set the desired start & finish times for these tracks and then (depending on your choice of import settings) use the *Create AAC/MP3 version* to make copies of just these sections of music. This would create a set of duplicate tracks just for this purpose that start exactly where you want them to.
tt2

Similar Messages

How to edit the starting time for clips in properties?

Hello there ,
I’m testing the CS5 Audition right now and find it great except for one thing:
In the properties for each clip there is a starting time. But it just can’t be edited!
I can change the starting time of the whole session – yes.
But not the ones of the individual clips. Only by moving them around and that is not very precise.
Is there a way to edit this starting times for the clips by typing in numbers?
Thank you :).

AAUser777 wrote:
But wasn't that easier before?
Do I have to save any time I make a change?
As far as I'm aware, you've always had to save changes to metadata to make them permanent!
One more please:
Can't I group Clips and move them together anymore?
One more thing please:
Many people say that CS5 is worse than 3.
Why are all those people bothered?
No you can't group clips in CS5.5. And the reason that a lot of people are bothered is - because you can't group clips in CS5.5.
There are a few other reasons cited too, but I think that the lack of clip grouping may be at the top of the list, judging from the number of comments about it. If you look around the forum you will find a lot of discussion about this.

Editing the start time of an iTunes track

I want to edit some video while using the song "Everybody Wants Some" by Van Halen but the song has a 40 second introduction that I don't need.
Is there a way to "split the audio" track like you could do in iMovie HD so I can eliminate the introduction at the start of my video?
Thanks,
MB!

There are at least two ways to do this.
1) Drag the audio clip in and drop it on the clip where you want it to start playing. It will appear as a bar underneath the video thumbnails. Grab the left edge of this bar and drag it to the left for 40 seconds, and the song will start where you want it.
2) Drag the audio clip in and drop it on the clip where you want it to start playing. Click on the audio bar to select it, and click on the Gear symbol in the audio clip. A waveform visual of the audio clip will come up and you can select the start point.

Can I edit the start time for all the podcasts from a single subscription downloaded to my itunes? i.e. want to creat a playlist of all the podcasts I have from a particular show...

I want to creat a playlist of all the podcasts I have from a particular show, want to edit out the first minute on all to skip the intro. Do not want to edit over 200 podcast manually. Is there a solution?

View menu -> Show Status Bar
Then the total play time for any group of tracks you select in the Songs area, for any selected album or for any selected playlist will show at the bottom of the iTunes window as in previous versions.
The ability to open playlists in separate windows was for some unfathomable reason removed in iTunes 11. Whether it will ever come back none of us here can say, but you can express your need for that feature via Apple's feedback page:
http://www.apple.com/feedback/itunesapp.html
Regards.

Change the start time of track 1

Hi, fairly new with waveburner but spent about 2 hours going through all the windows so i've got a good idea about the layout and where everything is.
Goal - to remove the 4 second silence at the beginning of the cd. There is a 2 second pause, and 2 seconds before the audio kicks in.
I recorded a dj mix and imported from logic into waveform. I made my track edits, titled all my tracks, added my efx and automation adjustments and just burned my master cd. After further review there is a 5 second delay before the first track.
I zoom into the timeline and it appears the audio sample is located and starts at 4 seconds. There is by default a 2 second pause for the first track. I have tried to change the start time on track 1, move the entire sample, and create a new track on the 5 second marker and delete the first track but i can't move get the first track to start at the 4 second point.
Here is a screenshot - http://kennygrant.ca/wp-content/uploads/2010/01/kenny-screenshot.gif
totally frustrated as the file i bounced did not have a 4 seconds of silence, so i'm totally confused.

What I ended up doing John is just simply deleting the original events from iCal then I went in to Outlook and manually changed the start/stop times of each event then went into the IMAP Calendar folder, clicked on that event and added it to my iCal. Thats sort of the process I use for getting my events to from Exchange to iCal anyway (can't wait for Snow Leopard) but that did the trick for me for these few items that were off. Fortunately I don't expect any changes from the author.
Thanks for responding!
JimN

Log the start time of each step to database

Hello,
i want to log the start time of each step to my sql datatbase. With the UUT start time it works (Str(Logging.StartDate.Month) + "-" + Str(Logging.StartDate.MonthDay) + "-" + Str(Logging.StartDate.Year) + " " + Str(Logging.StartTime.Hours) + ":" + Str(Logging.StartTime.Minutes) + ":" + Str(Logging.StartTime.Seconds)).
But how can i make it with the start time of the steps?
greetings
schwede
TS 3.0

Schwede,
see attached Sequencefile for an example what Ryan is talking about.
We use Additional Results to transfer the Timestamps to the ResultList (which is the origin for "Logging" ). You can include the Locals.StepDate, Locals.StepTime with other methods as well to the ResultList. I used the PostExpression of the last Statement to draft this.
hope this helps,
Norbert
[EDIT] PS: The SequenceFile is created in TS 4.1
Message Edited by Norbert B on 02-18-2009 07:37 AM
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.
Attachments:
StepTimestamping.seq ‏6 KB

I'm trying to have the end times shows up when I print my calendar from the month view. As of now, when I print in the monthly view, it only gives me the start time of a meeting.

I would like to have the ending times shown on my monthly calendar. As of now, it only shows the start time. The end times show up on the weekly calendar, but I don't want to print from the weekly view.

Hi,
I see two issues,
1. the url is not correct for the image, www.mountjay.com/Home/MountJayDesign.jpg
2. meta property should go in to head section, at the moment, it is under body (if you insert the code as html). go to page properties-> Metadata-> head. Paste this here, and check the site again,
Please let me know if you have any other query.

Does anyone know how to set the starting time for an audio book?

I am trying to restart a burn in iTunes that failed for an audiobook. I need to set the start time so it will not have to reburn the disks that were already completed. I cannot find out how to do that in version 11 if the book consists of more than one file. Anyone have an idea how to do this? Apple wants me to pay $20 for something that should be in the help menu.

UCCX 5.0(2)SR02 is the version
I attached a screenshot of what I am trying to use but I am not sure what to put as the value? I tried using "now" and "null" but no success.

Need a script to change the start time of meetings set by someone else...

Hello,
I have a series of events that someone else created and the start time is off by 1 hour in my timezone. Is there a script available to run and change these times or do I have to delete them and manually create them myself?

What I ended up doing John is just simply deleting the original events from iCal then I went in to Outlook and manually changed the start/stop times of each event then went into the IMAP Calendar folder, clicked on that event and added it to my iCal. Thats sort of the process I use for getting my events to from Exchange to iCal anyway (can't wait for Snow Leopard) but that did the trick for me for these few items that were off. Fortunately I don't expect any changes from the author.
Thanks for responding!
JimN

Hide the start time and end time in ESS portal

Experts,
We have a requirement to hide the Start time and End time on the header section of the travel request / expense sheet in the ESS portal. I have searched through the configuration and found several place to hide the start time and end time of segment yet these have no impact on the porta start and end time fields.
Please Advise.
Best Regards,
Martin Weakley

Hi Martin,
you can achieve this with administrative personalisation. In portal content navigate to the role where you deltalinked your iView, click "preview". When a new Window for the preview is opened, notice the URL contains "&sap-config-mode=true". Now right click on the fields you want to hide and choose "enter configuration" (or the like, wording is not exact) from the context menue. The WD-UI-Element tree opens where you can directly hide/customize properties of the WD. When clicking save+exist you can also transport the alterations you did.
maybe this helps or gives you a helpful alternative to the already stated measures in this thread
regards, Lukas

How to get the start time and date

Hi everyone! I have a question ,who will be glad to help me! Thanks in advance!
As we know ,when we finish the UUT test ,it generate report . The report format maybe like"SeqFileName_Report[Time][Date]_00001.xml"
My question is"how can I get the [Time] and [Date] in the test sequence"

See this post.
How To Display Time Information in Report/Results?
http://forums.ni.com/t5/NI-TestStand/During-a-test-how-can-I-find-the-start-time-and-date-of-that/td...
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

SCOM Alert Connector - not updating the start time and finish time

When I am monitoring the status of connectors in service manager console, I found that for SCOM Alert Connector the Start Time and Finish Time are not updating. Previously it was updated daily. As of now, service manager is working fine but would like
to check will it create any issues? Even I have cliked on Synchronize Now, but there is no update. Please guide me on this to trouble shoot further? Thanks.

Hi,
Based on my research, the Start Time and Finish Time values are not updated when an alert connector is synchronized. These values are only updated when alert data is transferred between Operations Manager 2007 and Service
Manager.
More details, please refer to the link below:
http://technet.microsoft.com/en-us/library/hh495609.aspx
In addition, here is a blog about troubleshooting for SCSM and SCOM alert connector:
http://blogs.technet.com/b/servicemanager/archive/2010/04/14/troubleshooting-tips-for-your-scsm-scom-alert-connector.aspx
Regards,
Yan Li
Regards, Yan Li

Where is the start time setting in CC 2014.2?

Cant find the start time setting for the timecode in my latest version of Premiere.
thanks
Phil

Found it, its in the sequence tab. rightklik and there it is.

The start time for SAP service

Experts:
Sometimes I need to know the start time for SAP service at
the NT service panel.
However either the service panel or the event viewer does
not give the service start time.
Is there a file to check above info?
Thanks!

Hi Jenna,
Windows Event Viewer will give you details on how long the service has been running since its startup.
A simple mathematical subraction can give you when the service was started.
Hope this is useful.
Regards,
Deepak Kori

Editing the display time for grouped objects

Hello, I am having issues editing the display time for grouped items. I am using Captivate 7 and I love how now the grouped items only show as one item in the timeline because it reduces the number of rows visiblein the timeline for each object on a slide. However, now that the grouped objects no longer individually appear in the timeline, I can't make any display adjustments to the grouped objects as a whole.
Has anyone else had this issue and is there a work around? My main issue is that if I have to extend or shorten the audio for the slide, and I have assigned an advanced action to the grouped object, in order to adjust the grouped object to match the audio, I have to now ungroup, make the adjustment, regroup, then reset the advanced action using the new group name. It is frustrating and time consuming.

To expand and view the grouped items on the timeline, you need to click the Arrow symbol next to the group name. Once you expand, you can select the individual object and adjust the timings.
Alternatively, you can select the individual object of the group on the slide and adjust the timings from the Timing accordion. You can do this without ungrouping.
Sreekanth

Editing the start times of various songs on one playlist only?

Similar Messages

Maybe you are looking for