Editing times of stills and transitions

HELP ME PLEASE !
I have been trying to edit the times of stills and transitions. I do what is instructed but it always comes back with a totally random number. What am I doing wrong ?

Welcome to iMovie Discussions.
You don't say HOW you are "..trying to edit the times of stills and transitions".
If you double-click on a transition, it should show you a window like this..
Then just click on the time that's shown there, e.g; "0:12" (meaning zero seconds and twelve frames ..or about half a second in the European PAL system ..0:15 would be half a second in American NTSC) and type a new number. So for two seconds' duration you'd type "2:00".
To make sure that this is NOT the default for all other transitions, UNtick the little box marked "Applies to all transitions".
Same thing for stills.
Doesn't that work for you?
P.S: If either of the clips which the transition applies to is not long enough for the time you've specified, then that time which you've typed won't take effect. But that shouldn't happen with stills.

Similar Messages

Help! Is there a FinalCut application or function where I can uniformly extend the duration of all my stills and cross-dissolves?

I am working in FinalCut 7.0.3 to build a slideshow from still images that will be projected in a gallery space. I have built a test presentation with still images joined by cross dissolves. All the stills run for 10 seconds and the cross-dissolves for 2 seconds--but the pace is too rapid. Is there a function I can apply to make all the stills and transitions run at an increased duration? Or do I have to piecemeal increase each segment and dissolve? Just will take a long time!

No way to globally change stills.
This is what I'd do.
• fiddle with a few slides in the existing timeline to figure out how long the stills should display and how long the transition should be.
• create a new sequence
• delete all the slides from your FCP browser
• go into FCP User settings and set the default still image duration to the length of time you determined earlier
• reimport all the slides
• put them on your new timeline - (they will now have the new duration)
• go to the Effects tab and find your transition and change the duration to what you determined earlier.
• right click on the transition name and set it to Default Transition
• in the timeline, select all the slides the "command" + T. This will apply the default transtion to all the slides.
Best,
x

I am having issues with adjusting the duration of time for each still frame and transition in imovie 11. Each time that I adjust these times, the app does not accept the change, and automatically enters its own time. Am I doing something wrong?

I am having issues with adjusting the duration of time for each still frame and transition in imovie 11. Each time that I adjust these times, the application does not accept the change, and instead automatically enters its own time. Is there a work around this? Or am I doing something wrong? Please Help!
Thank you,
lagrl

Have you tried turning off automatic transitions ? Choose file - project properties and follow the dialogue box to change duration with a slider. iMovie also doesn't allow a transition to be more than 50% duration of the clip its attached to. In other words if the clip is 4 seconds the transition cannot be more than 2 seconds and remember that relates to the first clip as the following clip (right side) is pulled back to overlay it.
Does this help. Perhaps you already know this ?

I made a imovie project and it has many transitions and stills and music soundtrack and rolling comments and text embedded in it. . I try and export it and it wont prepare the project beyond 16 minutes and shuts down every time. I have tried exporting it

i made a imovie project and it has many transitions and stills and music soundtrack and rolling comments and text embedded in it. . I try and export it and it wont prepare the project beyond 16 minutes and shuts down every time. I have tried exporting it to movies idvd itunes,and quicktime in a variety of sizes although not the smallest as I want to watch it on my computer and tv. All videos were recorded on an iphone. Apple store couldn't help me and suggested I redo part of the project. It is a really good project and would take hours to redo it . I just want to export it. Can any one please help???

Hi
Trying to get a picture of it.
• Free Space on Your Start-Up (Mac OS) Hard Disk. How Much ?
• Any other hard disks connected ?
• If so - Formatted as ?
Yours Bengt W

After several time installed CS6 and a clean Windows 8.1 bridge still pause after selecting a picture or right click with button mouse.

My bridge pause all the time. I have to wait 30 seconds after selecting a picture or click the right button of the mouse. I have installed a new windows 8.1, and a fresh CD6. But still these problems in Bridge. No problems in Photoshop. What to do

What is the problem:
When I choose a picture in Bridge I have to wait 20 till 30 seconds (sometimes more).
When I choose with right click of the mouse. I have to wait the same time.
When I choose the menu. Also
After opening the picture(s) in Camera RAW. There are no problems
In Photoshop there are also no problems. Everything works all right.
Only Bridge have these problems. But I can’t work with it.
My Computer
HP Z820 with double     CPU Type           Mobile Intel Celeron M, 2000 MHz
Nvidia Geforce GTX 980 card
System memory 64 Gb
Windows 8.1 Home Edition
All software is up to date, incl BIOS
DirectX 4.09.00.0904 (DirectX 9.0c)
Lots of space on my disc drives
Software: Adobe Master Collection. But only installed Photoshop and Adobe Acrobat
Installation done with my original DVD of Adobe. All software updated
But still problems
Software installed again (including Windows).
Now installed adobe from a download version from adobe.
Still the same problems
I have no illegal software!
Multimedia
Geluidskaart     SB Recon3D PCIe Audio Controller
Opslag
IDE apparaat     Standaard Dual Channel PCI IDE Controller
SCSI/RAID apparaat       Controlefunctie voor opslagruimten van Microsoft
SCSI/RAID apparaat       Intel(R) C600 Series Chipset SAS RAID (SATA mode)
SCSI/RAID apparaat       Intel(R) C600 Series Chipset SATA RAID-controller
SCSI/RAID apparaat       LSI Adapter, SAS2 2308 Mustang
Harde schijf       ATA Samsung SSD 850 SCSI Disk Device
Harde schijf       ATA SAMSUNG SSD 830 SCSI Disk Device
Harde schijf       SEAGATE ST3450856SS SCSI Disk Device
Harde schijf       SEAGATE ST3450856SS SCSI Disk Device
Optische Station             HL-DT-ST BD-RE BH16NS40
Optische Station             hp DVD-RAM GHA3N
SMART Status harde schijf         Onbekend
Partities
C: (NTFS)            243668 MB (150173 MB vrij)
D: (NTFS)            122101 MB (65332 MB vrij)
E: (NTFS)            429244 MB (322019 MB vrij)
F: (NTFS)            429244 MB (243491 MB vrij)
Geheugencapaciteit       1195.6 GB (762.7 GB vrij)
Invoerapparaten
Toetsenbord     Logitech HID-Compliant Keyboard
Toetsenbord     Standaard-PS/2-toetsenbord
Muis     HID-compliant Mouse
Muis     Microsoft PS/2-muis
Netwerk
Netwerkkaart    Intel(R) 82574L Gigabit-netwerkverbinding (192.168.178.37)
Netwerkkaart    Intel(R) 82579LM Gigabit Network Connection
Peripherieapparaten
Printer Adobe PDF
Printer EPSON XP-950 Series
Printer HP 4730 PCL 6
Printer Microsoft XPS Document Writer
USB1 apparaat Texas Instruments USB 3.0 eXtensible Host Controller - 0096 (Microsoft)
USB2 apparaat Intel(R) C600/X79 series chipset USB2 Enhanced Host Controller #1 - 1D26
USB2 apparaat Intel(R) C600/X79 series chipset USB2 Enhanced Host Controller #2 - 1D2D
Van: station_two
Verzonden: maandag 13 april 2015 21:58
Aan: johan van der klaauw
Onderwerp: After several time installed CS6 and a clean Windows 8.1 bridge still pause after selecting a picture or right click with button mouse.
After several time installed CS6 and a clean Windows 8.1 bridge still pause after selecting a picture or right click with button mouse.
created by station_two <https://forums.adobe.com/people/station_two> in Bridge General Discussion - View the full discussion <https://forums.adobe.com/message/7434796#7434796>

Edited clips and transitions don't render properly. Bugs in iMovie 7.1.4?

I'm using iMovie on a MacBook and have been using it for quite some time. I believe version 7.1.4 was downloaded during a recent Software Update. About the time I downloaded it, my iMovie started going haywire. I'm not positive these problems are as a result of the download, but I can't be sure.
More specifically, when I edit a movie and review what I've edited, the clips are out of order and the transitions may or may not work. Sometimes, I'll be able to see things in the preview pane properly. At others, the preview pane isn't working right.
Has anyone else had the same problem? If so, how did you fix it?
I've tried deleting my old projects and events, but that didn't work. Resarting the iMovie didn't work, either. I'm about to go back to the old version of iMovie.
Thanks.

Hi
Often the problem is sound and transitions -
• Extract audio first
• then apply transition
• then adjust the extracted audio so that they fade in and out
Working solution to a known problem
ELSE
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Garageband-fix. Start it, Play a note and Close it. Re-try (Corrects an audio problem that hinders iMovie)
• Delete iMovie pref file - or rather start a new user/account - log into this and re-try
iMovie pref file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named. com.apple.iMovie.plist
While iMovie is NOT RUNNING - move this file out to desk-top.
Now restart iMovie.
• Third party plug-ins that doesn't work OK (not relevant for iMovie’08 or 09)
• Program miss-match. iMovie 5.0.2, up to Mac OS X.4.11 AND QuickTime 7.4.1 - is OK
• Program miss-match. iMovie 6.0.3 or 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Program miss-match. iMovie’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Screen must be set to Million-colors
From LKN 1935. (in this case = iMovie HD (5), I tried it all, but nothing worked.
Your answer (above) has been helpfull insofar as all the different trials led to the conclusion that
there was something wrong with my iMovie software. I therefore threw everything away and reinstalled
iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos)
to my Sony camcorders worked properly as it did before.
Yours Bengt W

I have paid for Creative Cloud - illustrator CC 1 year monthly plan, but it still show "Trial Expired". I have tried to sign in and sign out creative cloud many times, but still can't work. Please help!

I have paid for Creative Cloud - illustrator CC 1 year monthly plan, but it still show "Trial Expired". I have tried to sign in and sign out creative cloud many times, but still can't work. Please help!

Does your Cloud subscription show on your account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page
Also,
This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files but still have them on the TC for future reference..

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files on iMac 20inch but still have them on the TC for future reference..eg some movies on iTunes. I want to directly save them on the drive so I can delete them from iTunes and gain some storage. (Ps on iMac 20 inch (it's almost full - 320 GB) when I enter time machine, a tab comes up on finder which reads "Time Machine backups" it's able to be ejected like a disc or a connected device. On the iMac 20 inch, I dragged some files onto there as if using it like a hard drive. Is this the correct method? Then I went to my 27inch iMac and saw the "Time Machine Backups" hoping to see the files I dragged from the 20inch iMac. But the files were not there except a folder that said "Backups.backupdb". Can someone help me?

It's not a good idea to use a network disk for both Time Machine backups and other things. By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files. I'd store those other files on an external disk connected to the Time Capsule. The problem with that is that Time Machine will only back up files that are local to your Mac. That means that you'll only have one copy of the files on or attached to your Time Capsule.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

Trying to rebuild my iphoto library from time machine backup and it still says 0 restored with a grey screen and the circle. How can i restore my library?

I just bought a new Macbook pro and i tried to rebuild my iphoto library from a time machine backup on an external hard drive. Even after pressing command+option when starting iphoto and selecting rebuild library from automatic backup, it still doesn't work with the grey screen with the white circle and a little window that says 'rebuilding library: 0 versions restored'. I also tried to make a copy of my iphoto library but that did not work either. how can i restore my iphoto library or at least gain access to my photos?

Your question is not clear
Rerairing or rebuilding the iPhoto library never involves using Time Machine in any way
TM is a totally seperate program and you can "restore" a file (including the iPhoto library) from the past using TM - you launch TM and go back to the time you want and select the file (or folder or package) you want and click restore - it probably is best to keep the current one until you are sure everything is good
LN

My macbook is loaded with microsoft work and every time I try and open the program I get an error reading and it will not open. Powerpoint and the other applications still respond!

my macbook is loaded with microsoft word for macs and every time I try and open the program I get an error reading and it will not open. This is what it says:
The application Microsof Word quit eunexpectedly. Powerpoint and the other applications still respond!

The joys of Microsoft!
Maybe the preferences file is corrupted. You should be able to find the Word preferences file in the folder:
your user name/Library/Preferences
Its name is com.microsoft.Word.plist
I suggest you drag this another folder and try Word again.
If that doesn't work then you might find clearing the cache files will fix the problem. You can do this manually but I never bother. Instead I use a program like Snow Leopard Cache Cleaner (shareware) or Onyx (free). These programs do lots of other maintenance jobs so it's worth having at least one of them.
Bob

My apple ID password works for all of my devices but one. i only have one account and have changed the password several times but still cannot get it to work on my iPhone. any suggestions would be appreciated.

My apple ID password works for all of my devices but one. i only have one account and have changed the password several times but still cannot get it to work on my iPhone. any suggestions would be appreciated.

Thanks for the suggestion, Chris. I actually did not resolve the issue which is why i did not post an answer.
it turns out that my iphone seems to default to an incorrect User ID (it defaults to an @me account, which is not something that i have ever used).
even when i change the User ID in my settings for the iTunes store, it still appears when i attempt to get updates for my existing apps. however, it does seem to use the correct ID when i attempt to purchase new apps.
If someone actually had an answer to correct this, i would love to update my existing apps.
Thank you.

Both of my kids have ipod touch 4. On 1 we can edit the camera roll and delete muptiple pics at once. On the other, we can't edit in camera roll and have to delete each picture one at a time? How do we get edit as an option in camera roll?

Both of my kids have ipod touch 4. On 1 we can edit the camera roll and delete muptiple pics at once. On the other, we can't edit in camera roll and have to delete each picture one at a time? How do we get edit as an option in camera roll?

Hi jenny,
Are you certain that they are both running IOS 6.1.3? Go to Settings>General>About, and check the "Version".
Cheers,
GB

How do you edit out the date and time stamp from a photo

How do you edit out the date and time stamp from a photo

You can blur it out with retouch
The built-in "Retouch" brush in "Edit" mode should suffice, if the background is mostly uniform, and if you set the size of the brush to slightly wider than the bar width of the letters. For example, in this picture I removed the year from the date (in the lower right corner) by using the "retouch" brush and following the contours of the letters. (the screen shot is from iPhoto '11, but iPhoto 9 should give similar results).
Regards
Léonie

My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

You will need to install the printer on your Mac
Open System Preferences (gear icon) on the dock
Open Print & Fax
Click the + (plus) button at the bottom of the printer list
Wait for your printer to appear in the next box, then click it to highlight it
Click Add at the lower right
Be sure to select the correct printer when you try to print as you will see your printer listed twice. Good idea to make the printer now installed on your Mac the default printer so you do not have to choose which printer to use each time you want to print.
You can also go into Print & Fax, select the printer associated with the Time Capsule and click the - (minus) button if you want to delete that location.

I have an iPod touch and also have the iHome.... When I first hooked it up it played music fine.....but now when I hook it up it says accessory unavailable for iPod touch and I've resetted it 2 times but still no music comes thru the iHome speakers

I have an iPod touch and also have the iHome.... When I first hooked it up it played music fine.....but now when I hook it up it says accessory unavailable for iPod touch and I've resetted it 2 times but still no music comes thru the iHome speakers

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
If your iPod is defective and not abused Apple will exchange it at no cost.
Apple Retail Store - Genius Bar

Editing times of stills and transitions

Similar Messages

Maybe you are looking for