Editing Via Network

Here's what we envision:
A multiple TB server or array which will allow working via network with all FCP files, including Scratch discs and other elemental parts(music, logos, etc.). I've attempted working directly from our current server but with considerable slowdowns(scrubbing clips, playback, etc.), the dreaded star-wheel of death makes a regular appearance, and just would not be efficient given our daily deadlines.
The big problem is we are stacking local drives to no end and often run into difficulty locating previously edited episodes on each others externals.
We would like to see a consolidated working area where any editor can easily locate and re-edit/re-purpose individual episodes, all the while having a common scratch area. (Note: no two editors are working on the same project at any one time, i.e. avid-style)
Suggestions?
Thanks in Advance!
-dave O'

EditShare.
Or XSAN, MetaSAN, SANmp, SANbox...
You need a VIDEO network. A regular old data network will not have what is required to edit streaming video. And yes, these are expensive solutions. EditShare is a big cheaper, and I like the way it does things. VERY Avid like.
Shane

Similar Messages

  • How can I disable the Edit- Preferences- Network- Settings- Noproxy option

    I want to disable the Edit->Preferences->Network->Settings->Noproxy option
    Every user user should access internet only via proxy settings what i should do for that and also should not be allowed to change the option

    Note that on Linux, the default is to use the "Use the system proxy settings" setting for the connection.
    You can look at these prefs to lock:
    *http://kb.mozillazine.org/network.proxy.type
    *http://kb.mozillazine.org/network.proxy.%28protocol%29
    *http://kb.mozillazine.org/network.proxy.%28protocol%29_port
    Use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new (default) values.
    Place a file local-settings.js in the defaults\pref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
    pref("general.config.filename", "mozilla.cfg");
    These functions can be used in the mozilla.cfg file:
    defaultPref(); // set new default value
    pref(); // set pref, but allow changes in current session
    lockPref(); // lock pref, disallow changes

  • I have just bought an iMac, and when I had my PC I had all my mp3 music on external hard drive and used to stream using software called ps3 server and tveristy which used to pick up on my Roberts radio via network wi fi hiw do I get iMac to do it

    I have just bought an iMac, and when I had my PC I had all my mp3 music on external hard drive and used to stream using software called ps3 server and tveristy which used to pick up on my Roberts radio via network wi fii and on my iPad via AirPlay. How can I do the same with iMac as this software isn't compatible

    To install apps from developers Apple doesn't recognize go to Security and Privacy in the System Preferences and change Allow apps downloaded from anywhere

  • Unable to edit protected network

    hello guys. i am using Nokia N97 Mini mobile. whn i try to connect my Wifi connection at University. it says unable to connect.
    when i try to add a new access point from Settings>Connectivity>Destinations>New Access Point
    it checks for new connection and found the Wifi Router... but whn i select to add it in my list. i get Error message... " Unable to edit protected Network".
    though the Wifi router is set to Open Network and its public.... still i cannot access it... whereas everyone else is enjoying the connection....
    can anybody help me with this problem.. and tell me if there is any solution available other then reinstalling the Firm....Your help will be appreciated... please help me!!

    @ sajjan
    Delete your Uni accesspoint. Open the default browser, connect to the Uni accesspoint, you'll be redirected to a secure webpage to fill in your username and password.
    @ jeandc
    You have to set up a packet-data (gprs) connection as described on page 61 of the English manual.
    http://europe.nokia.com/support/product-support/e7​2/guides
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • Inkjet 2800 on different windows connected via network

    Hello,
    Im using windows 7 Pro, and I can't access a printer which is connected via network on another computer with windows XP.
    The problem is that, when I install the printer on windows 7, it works as long it's connected to my computer,
    but, when i unplug the printer and reconnect it back to computer with XP, i'm unable to use the priter, although i installed the drivers already.
    the printer is shared,i can see it on network, but can't connect to it.
    the problem is only with inkjet 2800 printer,
    as i use hp Laserjet cp1215 which is on the XP computer, but works fine.
    Thank you in advance.

    Hello cesco,
    Welcome to the HP Forums.
    I see that you are having a communication issue when attempting to print on two separate printers at the same time.
    This will be a communication issue for sure.  The computer can only send to one printer at a time. You will have to print to one printer, wait for it to finnish the print job and then send it to the other printer. 
    There is no way that you can print from one computer to two separate printers at the same time.
    Thanks for your time.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Cant print from my usb HP 1050 printer can print a test page but nothing from pages, desktop  can print from iPhoto's, reset printer. reinstalled printer, this is with the latest 10.9.3, can't prnt all via network to a brother 3045cn?

    Tried all the printer uninstalled and re enstalled,, i can print test page but nothing from Pages , Or any text  from desk top, can print from iphoto's.
    Can print via Network to a Brother HL-3045cn from Pages and all Text, the Hp Prniter was working till i upgraded to 10.9.3?

    Reset your printing system, as per > OS X Mavericks: Reset the printing system

  • Editing via Speech Analysis metadata in Multicam?

    I'm trying to figure out the correct workflow (CS6) for using speech analysis metadata to cut a multicam interview.  I can see the metadata on individual clips.  But once they're nested inside a sequence for multicam, the metadata is no longer accessible.
    Is there a way to edit via speech analysis while still being able to use multicam?
    Thanks!

    I'd guess no.  But you might try putting sequence markers in the source sequence, which has the metadata.  Those sequence markers should show up as clip markers in the nested multicam sequence.

  • External editing via Corel Painter

    Does Aperture support external editing via Corel Painter X and Corel Essential 3?

    Does Aperture support external editing via Corel
    Painter X and Corel Essential 3?
    Just about anything can support external editing, as long as it can understand either 16-bit TIFF or 16-bit PSD files. Aperture just generates one of those two file formats (you choose in preferences which) then opens the external application and tells it to open that file.

  • Can't connect computers to printer (b210) via network because there are "other networks"

    I can't connect computers to printer (b210) via network because there are "other networks matching your network name".  This makes no sense at all. I have several Apple devices (iPhone, iPad, iMac) all with the latest software. The printer works fine when using the USB connection to my iMac. Nothing I do seems to solve this problem (rebooting, re-configuring, etc.). Help.

    Hi Cgold,
    If there are other networks matching your network name, then the printer will have issues connecting when you run the wireless setup wizard.
    However, there are other options:
    If your router supports 'Wi-Fi Protected Setup' with either a button to push on the router, or a pin to enter, you can choose that connection option under the wireless menu on your printer.
    or
    Change the network name that your router is broadcasting within the web page of your router (NOTE-this would force you to re-join all wireless devices back to the new network name you have created).
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • Playing Flac Converted Files via Network in iTunes

    I searched the internet for quite some time, but I couldn't find anyone with the same problem: I cannot play files which I converted from .flac to Apple Lossless .m4a (with dBpoweramp) via network on a diffrent PC with iTunes. Files which iTunes ripped directly from CD to m4a work perfectly fine so I know that the issue must have its origin in the flac converted files. The iTunes which I copied the files into plays all files them fine and streams them to my Airport without errors.
    Please tell me if you experienced the same or know of any solution.
    Thanks!

    Firstly, playing Flac in iTunes is an altogether different animal than playing them on your iOS device and is something you never asked about. For that you'll need to Google "Fluke FLAC" if you're still running Lion or older. If you're running a newer Mac OS I haven't yet heard of a solution for playing FLAC in iTunes and you'll have to resort to a third party app like Vox.
    For most FLAC playing iOS apps you'll add your music files via the "file sharing" section at the bottom of your Apps tab in iTunes when your iPod touch is plugged in. 
    As for Flac Player specifically the high price coupled with some reported problems I heard when looking into it had me steering clear so I can't offer first hand reports on THAT program.
    Since it sounds like you've been longing to play FLAC on your iPod touch for quite some time I was simply offering a bevvy of options to do just that I know of, including some free ones. 
    Hopefully someone will stumble across this thread and chime in with feedback about THAT app specifically for you.

  • Sun OS image restoration via network

    Hi All,
    Greetings & Good day,
    I am new to Sun-Solaris ; platform. I would like get some advice & tips how to setup [Sun Server OS image restore via network]
    Like Ignite server.. My goal is to create OS-image from existing server via network & restore back same os-image to same sever. kindly please advice.
    Thank you
    Best Regards,
    Johnson

    Hello Johnson,
    take a look in the Solaris Flash feature to see if it fit your needs.
    http://docs.oracle.com/cd/E23823_01/html/E23803/flashoverview-2.html#scrolltoc
    Best regards,
    Alexandre Shin-Iti Okamoto.

  • Access via network IbookG4 - MacMini

    hello,
    Owning an Ibook myself, I made my father buy a macmini so I could help him when he has problems with his machine ( he used to have a PC ) .
    I would like to access his computer from my house via network -
    I have his IP adress (static) and password to access his computer.
    How do I need to configure both computer to access the files from a distance?
    I'm runnig on 10.3. and his 10.4
    Thank for your help.
    Unless this subject has already been answered somewhere, please direct me to it.
    David

    You only need to enable File Sharing on his Mac mini. Then you can access it across the network for file sharing.
    If you want to see and control what is happening on his Mac mini, install Share My Desktop on his Mac mini. This gives him a very easy way to enable a VNC server. Then use Chicken of the VNC on your iBook to see and access his Mac mini.

  • CUPS - printer via network /printserver

    Hi there,
    I have got some problems with a printer via network.
    Situation:
    Me - Arch (updated)
    The Printer is connected with a printserver (Canyon) - this one is normaly conected with our LAN and is run by our Server (Windows 2000).
    Normally (which also worked with Ubuntu) I have to install the printer via the Window2000-PC.
    This I did with the gnome-cups-manager (the whole process with the ppd-files and so on)....
    Now the problems: I can't print: All the time, when I want to print a test-page, the printer is stopped - the job, too!
    I saw the part in the wiki (deleting the printer and adding it again) but it doesn't work!
    Next problem is, that I'm just able to print or configure the printer as root,
    what can I do?
    If you need more information, you'll get them
    Thanks
    Martin

    With network printers the better way, at least in my opinion, is to use the printer's IP address and use that to communicate with it. I tend to add it to my /etc/hosts and that gives me a simple way to "talk" to the printer accurately.
    Hope this helps.
    R

  • Back-up to TM via Network?

    I just installed a Mini to act as network hub. Is there a way to connect my TM drive to the mini and then back up my macbook and MBP to that TM drive the network? Is there any way to avoid having to manually hook my laptops into the drive each time?

    so long as all the computers are running 10.5 or 10.6 this is possible. just keep the TM drive plugged into the mini. then mount it via network on the macbook and select it as the TM drive. do the same on the MBP. I suggest you use an ethernet connection for the first backup. doing it wirelessly will take forever. note that remote TM backups are stored differently from directly attached ones. they are stored inside sparse bundles while directly attached ones are stored directly on the drive. therefore don't mix the two kinds of backups.

  • Sun Cluster 3.x connecting to SE3510 via Network Fibre Switch

    Sun Cluster 3.x connecting to SE3510 via Network Fibre Switch
    Hi,
    Currently the customer have 3 nodes clusters that are connected to the SE3510 via to the Sun StorEdge[TM] Network Fibre Channel Switch(SAN_Box Manager) and running SUN Cluster 3.X with Disk-Set.The customer want to decommised the system but want to access the 3510 data on the NEW system.
    Initially, I remove one of the HBA card from one the cluster nodes and insert it into the NEW System and is able to detect the 2 LUNS from the SE3150 but not able to mount the file system.After some checking, I decided follow the steps from SunSolve Info ID:85842 as show below:
    1.Turn off all resources groups
    2.Turn off all device groups
    3.Disable all configured resources
    4.remove all resources
    5.remove all resources groups
    6.metaset �s < setname> -C purge
    7.boot to non cluster node, boot �sx
    8.Remove all the reservations from the shared disks
    9.Shutdown all the system
    Now, I am not able to see the two luns from the NEW system from the format command.cfgadm �al shows as below:
    Ap_Id Type Receptacle Occupant Condition
    C4 fc-fabric connected configured
    Unknown
    1.Is it possible to get back the data and mount back accordingly?
    2.Any configuration need to done on the SE3150 or the SAN_Manager?

    First, you will probably need to change the LUN masking on the SE3510 and probably the zoning on the switches to make the LUN available to another system. You'll have to check the manual for this as I don't have these commands committed to memory!
    Once you can see the LUNs on the new machine, you will need to re-create the metaset using the commands that you used to create it on the Sun Cluster. As long as the partitioning hasn't changed from the default, you should get your data back intact. I assume you have a backup if things go wrong?!
    Tim
    ---

Maybe you are looking for