Editing Web Gallery options and Cmd-I

When I created a web gallery I did not check the option "Allow photo uploading by email". Now that the gallery is up, I'd like to enable that option but I can't figure out how to do it. The only way I've found to do it is to just republish the event as a new web gallery. That's not ideal.
I went to the gallery's web page but couldn't find a way modify any options there either. Am I missing something or is the only way to change that option is to delete and recreate the web gallery? If I do that then any links I have sent out to other people becomes invalid as a new URL is created.
I also noticed that the "Smart Album Info..." (Cmd-I) menu option is active under Photos in the menu bar, but it doesn't seem to do anything. Am I missing something?
Thanks,
Chip

Choose the Web Gallery in the source list on the left, and click the Settings button in the toolbar. You'll be able to change settings there, including allowing photo uploading by email. Even though the button says Publish, it will simply update the settings for that web gallery.

Similar Messages

  • Can't get "Send to web gallery" option to work on the iPhone.

    I have been trying to get the "Send to web gallery button" to work on my iPhone for a few weeks now. I managed to get it to work once. I was directed to delete the gallery on iPhoto ’08 and then recreate it and make sure my iPhone was not connected to wifi and wait 1 hour, it worked once… Then never again.
    I have an ongoing case open with Apple Care but there does not seem to be any definitive answer on how to get the option to work properly. One representative says that it should word fine, the other says that that feature was disabled in the last patch, (I had it working once under the current iPhone version 1.0.2 so I knew he was misinformed) I followed this Apple document and am still unable to get the feature to work: http://docs.info.apple.com/article.html?artnum=306272
    The Apple Care representative told me that the official Apple doc listed above was incorrect and that there was a better way to get the gallery to work and directed me to a Mac World Mac 911 article to resolve the issue http://www.macworld.com/weblogs/mac911/2007/08/iphonetowebgallery/index.php
    I insisted that this was a work around and that the actual “send to web gallery” button should display on the iPhone the Apple Care representative told me that I was incorrect and that the Mac 911 article was the only way to get the option to work.
    I actually met and spoke with the author Christopher Breen last weekend, and he agreed that this was a “work around” and that the "send to web gallery option on the iPhone should work. All I had to do was insure that I had my dot Mac account set up on the iPhone, iPhoto ’08 installed, a web gallery created in iPhoto and the option “Allow photo uploading by email” checked and published and all should be good in the world. Unfortunately, I just can’t seem to get it to work?
    I am not trying to “bash” Apple I would just like to get this option to work properly. Does anyone have any suggestion on how to get this option to work?

    It seems to be an ongoing issue the last couple of days..there's a few posts already discussing it in the forum. I found that if I sent the photos from my verizon acct on the iphone, it uploaded to the gallery fine..so it's a .mac account problem i think. Try it through another acct and I don't think you'll have a problem. It had always worked fine for me sending from my mac account until this weekend.

  • Edit web part option does not appear in browser on lists

    I've inserted some lists on a wiki page. However, when viewing in the browser the checkbox and the dropdown containing the Edit Web Part option do not appear. On the properties tag I thought I enabled all the correct properties such as Allow Edit, Allow
    Minimize etc. What am I missing?

    Hi Larry,
    According to your description, my understanding is that the Edit web part option disappeared in the list web part.
    I recommend to check if the account has permission to edit the web part, please check the permission of the account in Site Permissions and the list permissions.
    Please also check if the target audience is set in the web part.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • What is the web gallery option good for...

    what is the web gallery option good for if it doesnt work on any other computer, other than mine? If i choose save "online" where do i find ftp server ? and what type of sites does this work on?

    Saving collections and I suppose web gallery (although I have neverf used it) is really just a reference to file locations on your computer.  So it will not work for any other computer that is not exactly like yours.

  • Editable Web Gallery

    Is there any way of making the web galleries in Bridge CS4 more editable? ie I would like to add a navigation bar to the gallery so it integrates with the rest of my website? Or is there a way to create a webgallery that is not a html but an contect item to add within an already existing html?
    Is there a better program to use? Ie old photoshop? or Fireworks?

    EIther download a web gallery plug-in, or pay, or borrow, a good javascript slideshow option. I thought that after progress up through CS3 with web galleries (it still needed more customization) that Adobe would offer someting worthwhile in CS4, but not only have they changed the entire web gallery set-up, they've offered the blandest options possible. Seeing what's also going on in Premiere (4 dissolve transitions for Mac) and Flash CS4 (destroyed workspace), I really have to question the judgement of high management at the company...CS4 reeks to high heaven of cheapness...

  • How to Edit Web Gallery Output from CS5?

    Hello!  I just upgraded from Photoshop CS3 to CS5.  (Got some scrambling to do to catch up!)  I had been using the old File>Automate>Web Photo Gallery to create galleries for my Web site.  Massaged a little in Dreamweaver MX (I know, I know...) they look something like this:
    http://www.techno-imaging.com/gal10spring/alden_b2/index.html
    I found out how to add the old Web Photo Gallery back into Photoshop CS5, but was curious to find out what Bridge CS5 would do with Output>Web Gallery.  I experimented with the Standard template and was mostly happy with the result.  Here's what I got:
    http://www.techno-imaging.com/gal10spring/alden_b2_test1/index.html
    Trouble is I'd like to be able to customize the output a little more than allowed within the template itself.  It looks like the output has Flash, JavaScript, XML, HTML and maybe other programming resources.  I'm fairly familiar with HTML 3 and CSS, but am not a programmer.  Can anybody recommend what high-level editing tools (example: Microsoft Word for fancy text editing) I could use to make some modest tweaks?  The default modules are fine, but I'd at least like to be able to add a link back to my main gallery page like you see at the top right of my old Web Photo Gallery pages.
    Also- are there 3rd party templates for Bridge CS5 Web Gallery?
    Thanks, - Dave

    Hi i7nvd
    Oh my, I missed that completely!  Thanks very much for bringing that to my attention.  In the meantime I found that ACDSee would do a Web gallery that works OK for me.  However I will go back to Bridge Output Web Gallery this afternoon and five it a whirl.  Again, many thanks for jumping in and pointing that out to me.  I appreciate it a lot!
    BTW, thanks for the link to your site built with the Bridge plug-in.  And congratulations on the wedding!
    - Dave

  • How do I edit web gallery pictures uploaded by guests?

    I used iPhoto to post to a Mobileme gallery. I invited others to upload their snapshots. Now that there are new photos from others, I'd like to edit arrange and label them. Are they going to be synced with me iphoto database? How else can I control this content on my web gallery?

    I was too impatient. Just a few minutes later, iPhoto synced the uploaded photos and I can edit, crop, label and arrange!

  • How edit web gallery templates?

    I created four flash templates a while back. I now want to change the email I entered to a web url.
    I do that but it does not stick. I don't see a save button. Any ideas?
    Also, for the web url, the font is awfully small in upper right where it ends up. any way to make that bigger? thanks!

    Not sure why your changes don't 'stick'. I don't use flash galleries, for a variety of reasons, but I created a small one and changed that field and the data stays there. When I navigate away from that gallery to another one and and then come back it is still set to my web url rather than the 'default'.
    I expect the speed of gallery generation is controlled to a large extent by the size of your images and there isn't a lot that software changes can do to speed up that process.
    The biggest changes between v1 and v3 are in the image editing capabilities. Sharpening and noise reduction are vastly improved, for example, as is fill light. When I was using v1 I did a lot of external editing in PS, with v2 still some but not nearly as much and with v3 I rarely do any external editing at all.

  • Additional Web Gallery Options Needed

    I know that LR is not meant to substitute for a real web design application. However, it is intended to provide the ability to build photo galleries of photographers work for actual real world use. And as such, I find one thing about it that makes it rather limiting and somewhat defeats the point. I don't think most photogs who will use LR routinely are going to want to make one massive web gallery covering their whole body of ongoing work. It seems to me that many would be like me and want to create a collection of galleries that cover specific types of work, specific events, locations etc. While I may be wrong about how many would like that I am asure there are enough to justify even a small tweak to the Web Gallery capabilities of LR.
    One tweak that would thrill me is to have just a bit more control and ability to add links to the galleries I build in LR. Again, I don't need nor request the ability to build large involved websites. But it would be wonderful and very helpful to have the option of adding maybe one or two customizable links that would aid in tying a collection of web galleries together. Even if I couldn't build a main home page in LR whose only finction is to provide a base to launch a library of galleries, it would be great if I could tag a link onto my galleries that would like back to a page I build elsewhere, or even to link a collection of LR galleries together. Just a simple url tag that sends a viewer back to a home page, or to a different gallery.

    The bluefire_gallery as mentioned is the Flash Gallery.<br /><br />Here is lines 444 to 450 in the galleryMaker.xml file<br /> <mx:VBox ag:style="content_column"><br />      <mx:HBox><br />        <mx:Label text="$$$/WPG/Templates/BlueFire/ContactInfo=Contact Info"/><br />        <ag:mruPopup value="contactInfoName"/><br />      </mx:HBox><br />      <mx:TextInput ag:maximumLength='150' ag:resizeToFitTextHeight="true" id="contactInfoName" ag:layout="text_color=AgPanel.bright_text_color,"/><br />    </mx:VBox><br /><br />Change where it says 150 to 250 in line 449 (or 300 even if you need more characters)<br />Then add your links to the Contact Info box. Leave Web or Mail Link blank.<br />See screen cap to see it in action<br /><img src="http://seanmcfoto.com/lightroom/image/web.jpg">

  • Web Gallery, iWeb, and iPhone

    I just added a web gallery preview to my iWeb site. When I view it on my iPhone, there is a lego looking block with a ? in it. It won't show the preview of the web gallery. There is also no link to actually look at the pictures. Does anyone know if I am doing something wrong or if that is how it is supposed to be?
    www.MrShoemaker.com

    I wouldn't think it would flash as they know that the iPhone can't handle flash. It's kind of frustrating that one thing from the company doesn't work with another part of it.

  • Web Gallery Post and Delete Not Working

    Before the latest update things seemed to work as expected. After the update my web gallery doesn't work as expected. From imovie 08 I can't successfully delete movies nor can I successfully load them.
    Anyone else with the same issues. Apple has really dropped the ball on "works out of the box" or in my case, out of the credit card.
    No more money will go to them till they clean up their act.

    got help via e-mail from .mac team

  • Web Gallery Options Request

    I hope that in the updated version the user can make galleries with presized and optimized JPGs. I enjoy making web galleries with Lightroom but often like to do my web optimization in Photoshop. At this point it appears that if I create a folder full of web images, the only way to create a gallery in LR is to allow it to resave them all over again. There is no option to leave them as they are.
    Hope that makes sense.
    Linda

    Not as yet. Though check out
    Paypal in Lightroom Galleries.
    There are people working away at alternative templates, but have not seen one like what you want, yet.
    Don
    Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
    http://donricklin.blogspot.com/

  • Lightroom 5 - Building Web Gallery hangs and  then fails (worked versions 3, 4 no problems)

    The key and only reason I own and use Lightroom is to create and manage my 50,000+ family photos spanning through 3 centuries.  (1800s, 1900s, 2000s)   
    www.L-Y-N-C-H.com
    With Lightroom 5 the web galleries I have previously created and uploaded and as well the customer user presets I have created OR the standard templates are now ALL hanging and failing during the "Upload Web Photo Gallary after exporting all the images, etc. 
    The app does report the folders and files exist on the server so it must be logging in succesfully and parsing files and directories etc? 
    It then goes off and is looping around "Building Web Photo Gallery" and after about 5 plus minutes it fails with a " an error occured sending the file:  connection to the server failed" 
    Which is probably just because it is broken and then times out because of failure.
    I have checked, triple checked, changed passwords and also later uploaded FTP files and etc and actually am now having to EXPORT the whole gallery locally via LR5 and then FTP by hand the whole thing to the website.
    defeats the whole reason i have been buying this product?
    EVERYTHING works great except Lightroom 5 is now broken for this task to me.  All I did was send money to upgrade and install product and upgrade libraries.......so i can't go back right?
    ~Thomas~

    March 2014: After 31 years of emailing and internet use, our/my entire email system has recently been bombarded by huge volumes of spam, hackers, and robo-mailer daemons so I am taking drastic actions to reduce the 1,000s of unwanted emails we/I get everyday. HostGator (my ISP for email and L-Y-N-C-H.com) SpamBlocker and now BoxTrapper are fully implemented. 
    This process follows 2 paths: 
    1) Wait and allow me additional time on your first use for me to see your email and then add your ISP/URL and email to my accepted senders list.  (whitelist)
    2) Reply to the link below to verify you are not a robomailer or spambot, etc.
    Thomas
    The message you sent requires that you verify that you
    are a real live human being and not a spam source.
    To complete this verification, simply reply to this message and leave
    the subject line intact or click the link below:
    http://www.l-y-n-c-h.com/cgi-sys/bxd.cgi?a=[email protected]&id=cFT4xTcucHoOZdYMPH8W_-139617 7312//www.l-y-n-c-h.com/cgi-sys/bxd.cgi?a=[email protected]&id=cFT4xTcucHoOZdYMPH8W_-1396177312
    The headers of the message sent from your address are shown below:
    From [email protected] Sun Mar 30 06:01:52 2014
    Received: from mail0.phx1.jivehosted.com (204.93.64.116:40517 helo=mx1-out5.phx1.jivehosted.com)
         by gator4123.hostgator.com with esmtps (TLSv1:DHE-RSA-AES256-SHA:256)
         (Exim 4.80.1)
         (envelope-from <[email protected]>)
         id 1WUDUu-00042h-45
         for [email protected]; Sun, 30 Mar 2014 06:01:52 -0500
    Received: from adobe-vm-wa03.m1phx1.jivehosted.com (lbs1.phx1.jivehosted.com 10.160.3.6)
         by mx1-out5.phx1.jivehosted.com (Postfix) with ESMTP id 98739880A16
         for <[email protected]>; Sun, 30 Mar 2014 11:01:45 +0000 (GMT)
    Date: Sun, 30 Mar 2014 04:01:44 -0700

  • Missing web content options and Preview in Folio Overlay panel

    Hello,
    After placing a .oam file into a folio and while it is selected, when I click on the Folio Overlays panel, the web content listing options do not show up at all. Nor is the Preview option available. I saw and used them before when I was working through the tutorial. I sure hope it is something simple I overlooked!
    Thanks,
    Sarah

    That looks strange. With the .oam container frame selected you should see the web content overlay
    Try:
    Close and re-open the overlay panel
    Quit InDesign and relaunch to try again
    Else, try re-installing the DPS tools here Digital Publishing Suite Help | Installing DPS tools

  • Web gallery output and flash

    is flash the only output for web galleries?

    Actually, I've now tried it on a number of templates for web output, and none of them actually show the text or link for the email link or web address - it's not showing up in the template or final output.
    Also, is there a way (not too hard!) to place a 'back' button or a url address somewhere in a template? If I knew the actual text to place, I could >perhaps< copy it in somewhere...
    Thanks
    Laurence Bartone
    Check:
    http://bartonephotography.com/Weddings/
    That's a link, using the flash gallery - but I'll probably change it soon to a varient on 'blue sky'.

Maybe you are looking for