Editing with CR from Bridge: not saving changes?!?

Hi all..this is my first post here! sure not the last one.
thanks in advance for any help.
Ok, here is my issue...
I edit images with CS3, and i use Bridge as a starting platform, also to see images.
Now, owning a Nikon, my files are NEF (Nikon's RAW files). Fine. The thing is that when i open a NEF image FROM bridge with CR, in order to edit, whichever slight change i do on the NEF image it stayes on the original NEF files, even though i do not save the image!! I mean, if i want to mess around with a NEF image with CR, but DO NOT want to save the changes, how do I do it? If i modify, then close ACR...still the changes will remain in the pic in my folder.
Once i modified an image with CR through Bridge, a little rounded icon appears on the NEF image, on the top right corner; this button is apparently useless...i can ckick on it but nothing would happen.
I hope i could explain myself clearly.
Thanks a lot!
M.B.

Rest assured your raw NEF files are untouched. Any adjustments you make will only be kept in the sidecar file.
If you do NOT wish to keep the adjustments at all, just hit the Cancel button. If you hit Done, then the adjustments are kept in that sidecar file and are applied to the preview.
You would be well advised to read the documentation. ;)
The "button" you see actually has the icons of two sliders in it. It simply reminds you that YOU have made adjustments which are kept in the sidecar file and are applied to the thumbnail and previews, and to the image itself when you open it in Photoshop, UNLESS you clear the settings first. Look for the "Clear Settings" item in the Edit menu in Bridge when you have one of your images selected.
So, STOP hitting the "Done" button when you don't mean to keep the adjustments.

Similar Messages

Why are my edited pictures from bridge not saving when I automate batch files through PS?

When I edit my photos through adobe bridge (open camera raw, make adjustments to 1 picture), then automate (batch) my file folder in PS, the edits I have made don't save. Example, I crop an image & lighten it, I can view the adjusted image in bridge & camera raw, but when I batch my photos the editing I have done is gone.

Raw files need to be opened and saved before the adjustments are applied. I have no clue what your "batch save" does.
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Stocks App not saving changes

My stocks app is not saving changes no matter what changes I make. After making a change, I'll exit the app, re-enter and it defaults back to a whole bunch of stuff I didn't add.
Can someone help me with this, I'm not sure where to even start!

Nadia Bielawa wrote:
This did not help at all. I'm not about to restore my iPhone and set everything up again, there must be a simpler solution.
Th simple solution is restart.
If that fails, thenreset.
If that fails, then restore from backup.
If that fails, then restore as new.
If that fails then make an appointment at the genius bar.

The messages sent with PC suite are not saved in m...

I have a bluetooth device to connect my phone (Nokia 6233) to PC. When I'm trying to send a message everything goes perfect (the message is sent) only one problem appear: the message is not saved in my phone.
Any ideas for this problem?
Why the messages sent with PC suite are not saved in my phone?

there may be differencies between phone models here (S60 devices or S40 devices, you have S40). Also if I recall right, it used to be so that some older versions of PC Suite did not save the PC sent sms's to phone.
However, with my N95 the messages are saved. So make sure you have the latest Pc Suite and then try again. If it fails, then it might be that message saving is not supported with S40 phones (Anyone having a S40 phone could verify this)

IDVD 06 not saving changes?

Greetings. I teach an adult ed class in iLife. Unfortunately, the lab has old single 533 G4s. When we use iDVD 06, the program is not saving changes made in the different drop zones, etc. We place elements in drops zones, tell the program to save, quit and relaunch...nothing saved.
This problem was repeated by a student on his G5 at home.
Any ideas?
Thanks.
Michael Colin
Mac G4 Single 533 Mac OS X (10.4.4) Problem on G4 and G5

Hw much free space is left on the macs?
Plenty. These are very small projects we're working on.
Thanks for the response.
Michael
Mac G4 Dual 533 Mac OS X (10.3.9)

NOT SAVING CHANGES OR EDIT'S!!PLEASE HELP

hey guys,
i had this problem before along with many others, with the earlier vers of iphoto. until apple gave us the fix...now agin with 5.0.4.any changes or edits(redeye fix) are not saved to any of my pics!!
is anybody else having this problem??
is there a fix or update??
please help......thanks.

Hi sunny,
Check the permissions on the Library and Pictures folder. If they are set for you, make sure the library is not locked.
Get info on the iPhoto Library folder
screenshot of how the "get info" window should look for your user
If edits are not saved it could be the image files are locked, especially if these files came from another computer or sent to you in email. Do a "get info" on these files and unlock them.

Enhancement in IDOC_INPUT_ORDERS not saving changes after order creation

I have an enhancement at the beginning of the IDOC_INPUT_ORDERS function module used to create sales orders via EDI. In the enhancement, I take the data records and make some changes to some quantities and units of measure. After making these changes, I let the function module continue on as normal. The order does get created with my changes in them, however, the IDoc doesn't reflect my changes.
Here's an example: An EDI order comes in with 6 EAs of a material. In my enhancement, I change it from 6 EAs to 2 3PK. I then let it go on its way. The order gets created fine with 2 3PKs, however the IDoc after its a ll done still says 6 EAs.
The enhancement runs before the FM puts the data into the tables it uses. I tried using the last user exit to open the IDoc and editing it there using the EDI_DOCUMENT_OPEN_FOR_EDIT FM but it says its open.
Can anyone give me any clues on how to make my changes stick to the IDoc?
Thanks,
Curtis

Ok, I figured out why it's not saving. Not realizing it, but the tables are passed into the FM by reference, so what I'm changing is only a copy. So what I tried to do is use the 004 (I've also tried the 005) user exits to try to update the actual DB. I used the following FMs (EDI_DOCUMENT_OPEN_FOR_EDIT, EDI_CHANGE_DATA_SEGMENTS, and EDI_DOCUMENT_CLOSE_EDIT). The problem is that I can't change them because the IDoc is still open.
Does anyone have any ideas on how I can achieve my goal of changing the IDoc?
Thanks,
Curtis

Aironet 1242ag - not saving changes

dear friends...
i am struggling with this devices now from some time.. not sure where is the mistake ...when i am trying to configure wireless device (AP) from web using exprerss setup or nornal manual mode .. it is not saving any changes.. means clicking on apply button does not do anything .. infact its not getting clicked... please see the screen shot attaced ..my express setup menu is different then the one mentioned in this link
http://happyrouter.com/how-to-configure-a-cisco-wireless-access-point-ap-from-scratch
any still if you make any changes and refresh the page it comes back to 10.0.0.1 ip which is shown on the screen shot...
guys any help will be really appreciated ...
or if someone can also share the commands to configure the same... but before commands i want to sort out my above issues...

Hi,
The simpleset configuration would be something like as below.
dot11 ssid TEST
vlan 1
authentication open
interface Dot11Radio1
encryption vlan 1 mode wep mandatory
interface Dot11Radio1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio0
encryption vlan 1 mode wep mandatory
interface Dot11Radio0
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
encapsulation dot1Q 1 native
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip add x.x.x.x y.y.y.y (where x.x.x.x is the ip address whichyou want to assign and y.y.y.y is the subnet mask)
ip default-gateway x.x.x.x (where x.x.x.x is default gateway which you want to use)
Hope that helps
Regards
Najaf
Please rate when applicable or helpful !!!

Cisco Prime Soft Appliance not saving changes to syslog.conf

Greetings,
I'm having an issue with the syslog.conf file on a Cisco Prime LMS 4.2.4 soft appliance with a Solaris base. My workplace uses local4 as the logging facility for its network devices, and according to a discussion I found on this site, I need to add the line:
local4.info /var/log/syslog_info
I have attempted this several times; we're approaching at least 5 attempts today. I have attached text files created from putty logs where I've attempted to make the necessary change. I appreciate any assistance the community can provide.
Regards,
Rob

Hi, Afroz,
I really appreciate your assistance, but I'm afraid my hopes have been dashed. The syslog.conf reverted to its original configuration. I will go through my steps to be sure that I understood your suggestion properly.
I edited the syslog.conf to put all messages from local4 in /opt/CSCOpx/conf/syslog-entries.txt. Then, I exited the shell to the console, issued the 'write mem' command, and closed the session. Upon my reconnection, I found that my changes to the syslog.conf were not saved.
Did I make the correct edits in the correct places? Another question, is this bug present in the versions of Prime LMS running Linux and/or Windows, or does it only exist in the soft appliance running Solaris?
Regards,
Rob
Edit:
I'm reading the "Installation and Migration of Cisco Prime" PDF, and it gives me the impression that Cisco Prime is only supported as Windows, Solaris, and soft appliance installations. Is that correct? If it is correct, then installation of Cisco Prime LMS is not supported on other Linux distros such as Ubuntu Server, CentOS, Fedora, etc.?
My thanks.

Cannot open file from Bridge after saving in Photoshop CS3

I was working on three images in Photoshop CS3, when I went to open them from Bridge for review, two of three files were reduced to tiny white squares with a dogear in the top right corner, a little blue bounding box containing three tinier red green and blue somethings so small I couldn't even see what they were with my jewellery spec.
Nothing happened when I clicked on them, no error message, nothing. I managed to get one of them in 'reveal' - which opened up a larger blue bounded box with the red button containing a cross with the message 'cannot open as not right kind of file'.
What to do please? I don't want to spend hours on an image and hope it will open afterwards. Thankyou.

Thankyou for taking the time to respond. I did notice that I'd forgotten to place a . after the file name and before the extension - ie soiphotopsd, instead of soiphoto.psd, and renamed them and the opened as psds. I would have thought that Photohop CS3 with all it's bells and whistles could have provided a helpful popup/error message to this effect when saving images though!
I still have an old file I haven't been able to open, the icon of which is simply a small blue and white box with the letters pmg on the bottom. I tried to rename the file same as, but nothing seemed to work so far. Will just keep plugin away - forgive the pun.
Thanks again.

Bridge not saving settings.

I am using Bridge with CS4 and have the following minor but irritating problem.
Bridge does not save the current settings such as last folder used or screen view settings when the computer system is shut down.
These setting are saved during periods of opening and closing bridge while the computer remains powered up but are not saved (presumably to the registry) when the computer is powered down.
I am using Windows XP / service pack 3
I presume that there is an entry in the system registry that needs editing. I would appreciate if anyone with knowledge of a solution for this problem would assist me.
TIA
Roy Berger

Thank you for the information, it is most helpful.
Of course you are correct about me having bridge set to "autoload on
startup". It will look into closing Bridge before shutting down.
Appreciate the prompt reply,
Regards, Roy Berger
http://www.pbase.com/parrothouse

Crystal Reports 8.5 not saving changes to report criteria

When I use the formula editor to add new criteria to the report criteria formula, the changes are not saved when the report is closed. It doesn't seem to matter how I exit the formula editor, and I've even tried "save as" and saving the report to a new name prior to closing. When I reopen the report, the changes are gone.
Sometimes the changes don't even last that long - they often disappear while doing a refresh.
Are there and known bugs that I haven't found - or better yet, any solutions?

Hi Roberta.
I've had this happen a few times as well. Usually though a message will come up at some point in time saying. If the report is locked when you open it, either because someone else has the same file opened in Crystal or if you open the report from an e-mail attachement, a message will come up saying something in the lines of the report cannot be saved and it must be saved to a new file.
When you do the Save As, where are you saving it to? Try creating a new folder and saving it to that folder. You should have full permissions to the new folder and I'm hoping it will save. I just want to eliminate any problems with permissions. After you save the file, check the properties of the file. Did the file's date and time update or does it still have the original date?
When you open the report in Crystal, go to File on the menu bar and make sure Save Data with Report is not checked. Make your changes and rerun the report and save it again. See if that helps.
These are the two common problems I've had when this happens to me.
Hope this helps,
Brian

Program not saving changes other than "Autosave"

I recently began a new music project. I have worked on the project for several days and regularly saved the changes. Until yesterday, whenever I would open up the FCE software, the project would automatically open (displaying the timeline, viewer, and canvas windows, etc.) and the cursor would be at the last place I'd done work.
I began a new interview project yesterday, and now it doesn't seem to "save" the changes that I make. I noticed that the last editing work that I had done on the music project hadn't been saved, in spite of the fact that I "manually" saved it (by doing either File>Save Project or File>Save all). I am able to recover recent versions through the "Autosave Vault."
In the "Autosave Vault," I can locate a version of the work--which is saved every 1/2 hour, but I cannot locate the sequence (or "project file" or "timeline") showing any changes which occurred after the hour (or 1/2 hour) that the autosave kept. Under preferences, I've put the captured footage and other items related to the project on an external firewire-connected hard drive.
Did I mess things up by not putting the project file in the "Documents" folder, or is there some other explanation?
I seem to be able to go back an manipulate and edit those files from the "Autosave" folder, but it is a tedious process unless I've finished working near the hour (or 1/2 hour time) "Autosave" time.
Any info/advice will be appreciated.
Thanks in advance,
Gary

Repairing permissions might solve the problem. It might: it is just an attempt that should never have any bad effect, and indeed often removes obstacles that prevent the application from working correctly. So you can try that at any time, even in the middle of a project.
The same applies to trashing preferences (not permissions); in this case the only side effect is that you must set your preferences again (scratch disk, easy setup, and any setting you changed in the User Preferences or System Settings).
But, see my previous answer, the first thing I suggest you to try (no side effects, very easy and fast) is "Save As" to a different volume. If that works, than clearly the problem is the health of the volume where you usually save your project files.
Piero

Bridge not saving toning/applying post production - like 20K images to tone!!

Hi - Am desperate - have 10 weddings to do post production on and my bridge is acting up.
I am having a bridge isssue - when I apply the toning/cropping/color correction to images and press done it is not saving the work. In addition when I do the work in bridge and then choose save as it just save them as untoned JPGSs. It does not apply the raw conversion or xmp data.
In addition it is only happening in half the images in the folders not all of them. And it's not camera specific it's random.
Any help would be greatly appreciated.
[email protected]

I am having a bridge isssue - when I apply the toning/cropping/color correction to images and press done it is not saving the work. In addition when I do the work in bridge and then choose save as it just save them as untoned JPGSs. It does not apply the raw conversion or xmp data.
Bridge is only a file browser without editing capacities (except the export panel but that has been discontinued in Bridge CC) and reflects the content of your folders. If you make changes in ACR using either selecting via PS or via Bridge any changes should be visible wether you have hit done or save in ACR.
If you have other results, especially random difference it looks like a cache problem to me. So point the Content panel to a problem folder and use menu tools / cache / purge cache for folder and check if this solves your problem.

Batch editing raw files from bridge

When I batch edit my raw files, including saving the file as a jpeg, from bridge or photoshop the resulting file saved never includes any changes I made in the Camera Raw editor. For example if I have lightened the photo by changing the exposure in Camera Raw as a saved jpeg after batching the file is still as dark as when originally shot. Is there some little box I forgot to check or something? Thanks!
andy

Edit:
Glad to hear you got it working.
I'll just leave what i had put here anyway.
You want Program Files (x86)
That's where the 32 bit programs such as photoshop cs3 are on a windows 7 64 bit system.
Also, in bridge cs3 under Edit>Preferences>Thumbnails ensure Prefer Adobe Camera Raw for Jpeg and Tiff files is checked.
(then restart bridge cs3)

Editing with CR from Bridge: not saving changes?!?

Similar Messages

Maybe you are looking for