Editor and Organizer integration - disable?
I have had Photoshop Elements for some time as it was part of a bundle I purchased with Premiere Elements. Until recently, I had been using Paintshop Pro for photo editing and PE only for the organizer.
Since I am several version behind on all three, I decided to see if I could get used to PE for the editing as I am not thrilled with the direction Corel has taken with PP. It all seems to work fine with one exception. Mostly I use the editor to resize, touch up, crop, etc. photos for my family web site. The way I have always done this in the past is to drag the photos from the organizer to a working directory (thus creating a copy) and edit the copy. Once my site is updated, I delete the files from the working directory. It appears that any photo I edit in this fashion using PE gets added to the Organizer and then becomes a 'broken' thumbnail once I delete the temporary copy from the working directory. Is there an option to disable the automatic add of any edited photo to the organizer? Note that I never had this problem when I used PP to edit the copies. (By the way, I directly edit the copies, I do not put them in Organizer and then launch the editor from there. I open the copy directly.)
Any help appreciated.
Word of warning: NEVER count on your host as your only source of backups. I bet in their terms of service somewhere it states that you are responsible for your own backups (even if the host does regular backups.)
FYI: If you use Save for Web Organizer makes a copy of the file and does not include it in Organizer.
If you put much work into the edited versions they are worth saving. Why go back and have to remove red eye, crop, adjust color, etc. every time you want to use a photo? I don't reduce file size until after my edits are done so it is worth it to save them. I don't always bother saving the layers though.
You might want to think about saving your website files to disc before deleting them from your hard drive. Cds are cheap for a bit of extra insurance.
Similar Messages
-
PSE 8.0 Will Not Open (Including Editor and Organizer)
I have been using PSE 8.0 for three or four years now, and I have never experienced any problems with it. Today, after installed a Wacom Intuos Creative Pen Tablet, my PSE 8.0 would not open-- nor would Editor and Organizer. I tried uninstalling and reinstalling the program, renaming certain files (as read in other answers), creating shortcuts to bypass the Welcome Screen (which also will not appear), among other solutions that I read about for similar problems. Whenever I attempt to open Organizer, a crash report appears, stating that the program has quit unexpectedly--that's all it says. If I try to open PSE 8 or Editor, the circle next to my cursor appears for a moment, but soon it disappears without a single pop-up or explanation as to why the program won't open. Since I cannot access the Welcome Screen, I cannot locate the Preference file to change the name/delete it. If it matters, I use Windows 7.
Any and all help is appreciated. I'm going a bit insane without my lovely Photoshop to doodle in. ;n;
Thank you,
~ MongooseEDIT: I found the Preferences within the PSE folder, and I renamed it; afterwards, I tried to open PSE again. It reset the Preferences, yet it is still telling me that PSE has unexpectedly quit. /EDIT
I went into the PSE folder and attempted the "three finger salute" while clicking on Organizer, but all it brought up were the Organizer Properties.
Also, within the past hour, PSE has been randomly popping multiple times up to inform me that it unexpectedly quit, yet I have not tried to open it recently. I am not sure if that is important or not. -
I was almost finished with a video I have worked on for 4 days when the editor and organizer went black. The software keeps shutting down now. What do I do? By the way, the files all loaded. I just can't see them.
Ruthi54
Somehow that does not look like Premiere Elements 11 or 12. What version of Premiere Elements are you using and on what computer operating system is it running?
If you are running Premiere Elements 10 and your computer uses a NVIDIA GeForce video card, then please read the Announcement at the top of this forum. If you are a Premiere Elements 10 NVIDIA users, then it is mostly likely that you will need to roll back the NVIDIA card version to continue to use your Premiere Elements 10. For your convenience, a copy/paste of the Announcement
Announcement: Premiere Elements 10 NVIDIA Video Card Driver Roll Back
Hide Details
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.ht ml
Please let us rule this factor in or out at the onset.
Thank you.
ATR
Add On...Your screenshot shows some icons at the bottom of the screen that appear to have warning symbols. What do those icons represent? -
Use Photoshop Elements 9 as default editor and organizer
I moved to iMac from /windows. I have Adobe Photoshop Elements 9 on my Mac and also iPhoto. Iphoto cam preinstalled on the mac. I want to use PSE exclusively and not iPhoto. I don't want to uninstall iPhoto, just want to have PSE set as the default editor and organizer of my photos. How do I set my system to use PSE?
Thanks
SteveIn the iPhoto (or image capture) preferences set the action when a camera is connected to launch PSE
LN -
just installed PS 13 elements and loaded pictures into organizer. after using PS editor now organizer is not reloading. I keep getting error message saying organizer unexpectedly quit, do you want to reopen. When I click on it to reopen it doesn't and I get the same message again. I rebooted computer, still did it, I uninstalled and reinstalled the program and I am still getting the same error message. This is on Mac OS with yosemite. Any Ideas Please!!!
Thread 8:
0 libsystem_kernel.dylib 0x00007fff9219f4de mach_msg_trap + 10
1 libsystem_kernel.dylib 0x00007fff9219e64f mach_msg + 55
2 com.apple.CoreFoundation 0x00007fff97717b34 __CFRunLoopServiceMachPort + 212
3 com.apple.CoreFoundation 0x00007fff97716ffb __CFRunLoopRun + 1371
4 com.apple.CoreFoundation 0x00007fff97716858 CFRunLoopRunSpecific + 296
5 com.apple.AppKit 0x00007fff8e85533b _NSEventThread + 137
6 libsystem_pthread.dylib 0x00007fff974c1268 _pthread_body + 131
7 libsystem_pthread.dylib 0x00007fff974c11e5 _pthread_start + 176
8 libsystem_pthread.dylib 0x00007fff974bf41d thread_start + 13
Thread 9:: cr_scratch
0 libsystem_kernel.dylib 0x00007fff921a4136 __psynch_cvwait + 10
1 com.adobe.CameraRaw 0x000000012122478b 0x120c28000 + 6277003
2 com.adobe.CameraRaw 0x00000001211ad48b 0x120c28000 + 5788811
3 com.adobe.CameraRaw 0x0000000120fad001 0x120c28000 + 3690497
4 libsystem_pthread.dylib 0x00007fff974c1268 _pthread_body + 131
5 libsystem_pthread.dylib 0x00007fff974c11e5 _pthread_start + 176
6 libsystem_pthread.dylib 0x00007fff974bf41d thread_start + 13
Thread 10:
0 libsystem_kernel.dylib 0x00007fff9219f4de mach_msg_trap + 10
1 libsystem_kernel.dylib 0x00007fff9219e64f mach_msg + 55
2 com.apple.CoreFoundation 0x00007fff97717b34 __CFRunLoopServiceMachPort + 212
3 com.apple.CoreFoundation 0x00007fff97716ffb __CFRunLoopRun + 1371
4 com.apple.CoreFoundation 0x00007fff97716858 CFRunLoopRunSpecific + 296
5 com.apple.CoreFoundation 0x00007fff977ccef1 CFRunLoopRun + 97
6 com.adobe.ols.library 0x00000001235ebc86 OLSHTTPTransaction::Execute() + 4166
7 com.adobe.ols.library 0x00000001236174f9 OLSServiceTask::PerformMessageExchangeServerPOST(OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&) + 1849
8 com.adobe.ols.library 0x000000012360958a OLSServiceTask::PerformMessageExchangeServer(OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&) + 1834
9 com.adobe.ols.library 0x000000012361626c OLSServiceTask::ProcessUnhandledMessageList(OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&, OLSMessageOrigin) + 1804
10 com.adobe.ols.library 0x00000001235c885c OLSClientSession::ProcessUnhandledMessageList(OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&, OLSMessageOrigin) + 124
11 com.adobe.ols.library 0x00000001235c6921 OLSClientSession::ProcessMessageList(OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&, OLSMessageOrigin) + 2593
12 com.adobe.ols.library 0x0000000123608d3a OLSServiceTask::ExecuteStateMessageExchangeServer() + 426
13 com.adobe.ols.library 0x00000001236010cc OLSServiceTask::ExecuteInternal() + 1196
14 com.adobe.ols.library 0x000000012361b22e OLSTask::Execute() + 350
15 com.adobe.ols.library 0x000000012361c874 OLSWorkerThreadTaskManager::ProcessTasks(OLSTaskThread*) + 1300
16 com.adobe.ols.library 0x000000012361b454 OLSTaskThread::Run() + 36
17 com.adobe.ols.library 0x000000012363fd88 OLSThread::ThreadProc(void*) + 54
18 com.apple.CoreServices.CarbonCore 0x00007fff9c7108dc PrivateMPEntryPoint + 58
19 libsystem_pthread.dylib 0x00007fff974c1268 _pthread_body + 131
20 libsystem_pthread.dylib 0x00007fff974c11e5 _pthread_start + 176
21 libsystem_pthread.dylib 0x00007fff974bf41d thread_start + 13
Thread 11:
0 libsystem_kernel.dylib 0x00007fff921a475a __sigwait + 10
1 com.adobe.ElementsOrganizer13 0x000000010dce1a84 0x10cc7e000 + 17185412
2 com.adobe.ElementsOrganizer13 0x000000010dce5d15 0x10cc7e000 + 17202453
3 libsystem_pthread.dylib 0x00007fff974c1268 _pthread_body + 131
4 libsystem_pthread.dylib 0x00007fff974c11e5 _pthread_start + 176
5 libsystem_pthread.dylib 0x00007fff974bf41d thread_start + 13
Thread 12:: com.apple.NSURLConnectionLoader
0 libsystem_kernel.dylib 0x00007fff9219f4de mach_msg_trap + 10
1 libsystem_kernel.dylib 0x00007fff9219e64f mach_msg + 55
2 com.apple.CoreFoundation 0x00007fff97717b34 __CFRunLoopServiceMachPort + 212
3 com.apple.CoreFoundation 0x00007fff97716ffb __CFRunLoopRun + 1371
4 com.apple.CoreFoundation 0x00007fff97716858 CFRunLoopRunSpecific + 296
5 com.apple.CFNetwork 0x00007fff8fcfac80 +[NSURLConnection(Loader) _resourceLoadLoop:] + 434
6 com.apple.Foundation 0x00007fff90df190a __NSThread__main__ + 1345
7 libsystem_pthread.dylib 0x00007fff974c1268 _pthread_body + 131
8 libsystem_pthread.dylib 0x00007fff974c11e5 _pthread_start + 176
9 libsystem_pthread.dylib 0x00007fff974bf41d thread_start + 13
Thread 13:: com.apple.CFSocket.private
0 libsystem_kernel.dylib 0x00007fff921a43fa __select + 10
1 libsystem_pthread.dylib 0x00007fff974c1268 _pthread_body + 131
2 libsystem_pthread.dylib 0x00007fff974c11e5 _pthread_start + 176
3 libsystem_pthread.dylib 0x00007fff974bf41d thread_start + 13
Thread 14:
0 libsystem_kernel.dylib 0x00007fff921a4136 __psynch_cvwait + 10
1 com.adobe.ElementsOrganizer13 0x000000010dce02fd 0x10cc7e000 + 17179389
2 com.adobe.ElementsOrganizer13 0x000000010cd34e19 0x10cc7e000 + 749081
3 com.adobe.ElementsOrganizer13 0x000000010dce5d15 0x10cc7e000 + 17202453
4 libsystem_pthread.dylib 0x00007fff974c1268 _pthread_body + 131
5 libsystem_pthread.dylib 0x00007fff974c11e5 _pthread_start + 176
6 libsystem_pthread.dylib 0x00007fff974bf41d thread_start + 13
Thread 15:
0 libsystem_kernel.dylib 0x00007fff921a4136 __psynch_cvwait + 10
1 com.adobe.ElementsOrganizer13 0x000000010dce02fd 0x10cc7e000 + 17179389
2 com.adobe.ElementsOrganizer13 0x000000010cd34e19 0x10cc7e000 + 749081
3 com.adobe.ElementsOrganizer13 0x000000010dce5d15 0x10cc7e000 + 17202453
4 libsystem_pthread.dylib 0x00007fff974c1268 _pthread_body + 131
5 libsystem_pthread.dylib 0x00007fff974c11e5 _pthread_start + 176
6 libsystem_pthread.dylib 0x00007fff974bf41d thread_start + 13
Thread 16:: JavaScriptCore::BlockFree
0 libsystem_kernel.dylib 0x00007fff921a4136 __psynch_cvwait + 10
1 libc++.1.dylib 0x00007fff8fb2ad2e std::__1::condition_variable::__do_timed_wait(std::__1::unique_lock<std::__1::mutex>&, std::__1::chrono::time_point<std::__1::chrono::system_clock, std::__1::chrono::duration<long long, std::__1::ratio<1l, 1000000000l> > >) + 126
2 com.apple.JavaScriptCore 0x00007fff99593aaa JSC::BlockAllocator::waitForDuration(std::__1::chrono::duration<long long, std::__1::ratio<1l, 1000l> >) + 170
3 com.apple.JavaScriptCore 0x00007fff993828f4 JSC::BlockAllocator::blockFreeingThreadMain() + 84
4 com.apple.JavaScriptCore 0x00007fff9937814f WTF::wtfThreadEntryPoint(void*) + 15
5 libsystem_pthread.dylib 0x00007fff974c1268 _pthread_body + 131
6 libsystem_pthread.dylib 0x00007fff974c11e5 _pthread_start + 176
7 libsystem_pthread.dylib 0x00007fff974bf41d thread_start + 13
Thread 17:: JavaScriptCore::Marking
0 libsystem_kernel.dylib 0x00007fff921a4136 __psynch_cvwait + 10
1 libc++.1.dylib 0x00007fff8fb2ac95 std::__1::condition_variable::wait(std::__1::unique_lock<std::__1::mutex>&) + 47
2 com.apple.JavaScriptCore 0x00007fff99382f1b JSC::GCThread::waitForNextPhase() + 171
3 com.apple.JavaScriptCore 0x00007fff99382d78 JSC::GCThread::gcThreadMain() + 88
4 com.apple.JavaScriptCore 0x00007fff9937814f WTF::wtfThreadEntryPoint(void*) + 15
5 libsystem_pthread.dylib 0x00007fff974c1268 _pthread_body + 131
6 libsystem_pthread.dylib 0x00007fff974c11e5 _pthread_start + 176
7 libsystem_pthread.dylib 0x00007fff974bf41d thread_start + 13
Thread 18:: JavaScriptCore::Marking
0 libsystem_kernel.dylib 0x00007fff921a4136 __psynch_cvwait + 10
1 libc++.1.dylib 0x00007fff8fb2ac95 std::__1::condition_variable::wait(std::__1::unique_lock<std::__1::mutex>&) + 47
2 com.apple.JavaScriptCore 0x00007fff99382f1b JSC::GCThread::waitForNextPhase() + 171
3 com.apple.JavaScriptCore 0x00007fff99382d78 JSC::GCThread::gcThreadMain() + 88
4 com.apple.JavaScriptCore 0x00007fff9937814f WTF::wtfThreadEntryPoint(void*) + 15
5 libsystem_pthread.dylib 0x00007fff974c1268 _pthread_body + 131
6 libsystem_pthread.dylib 0x00007fff974c11e5 _pthread_start + 176
7 libsystem_pthread.dylib 0x00007fff974bf41d thread_start + 13
Thread 19:: JavaScriptCore::Marking
0 libsystem_kernel.dylib 0x00007fff921a4136 __psynch_cvwait + 10
1 libc++.1.dylib 0x00007fff8fb2ac95 std::__1::condition_variable::wait(std::__1::unique_lock<std::__1::mutex>&) + 47
2 com.apple.JavaScriptCore 0x00007fff99382f1b JSC::GCThread::waitForNextPhase() + 171
3 com.apple.JavaScriptCore 0x00007fff99382d78 JSC::GCThread::gcThreadMain() + 88
4 com.apple.JavaScriptCore 0x00007fff9937814f WTF::wtfThreadEntryPoint(void*) + 15
5 libsystem_pthread.dylib 0x00007fff974c1268 _pthread_body + 131
6 libsystem_pthread.dylib 0x00007fff974c11e5 _pthread_start + 176
7 libsystem_pthread.dylib 0x00007fff974bf41d thread_start + 13
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x00000000000000b0 rbx: 0x00006080000b4460 rcx: 0x00007fff52f7da08 rdx: 0x00007fff52f7d8c0
rdi: 0x00006080001d31a0 rsi: 0x0000000000000000 rbp: 0x00007fff52f7d860 rsp: 0x00007fff52f7d830
r8: 0x00007fff52f7d9d8 r9: 0x00007fff52f7d9a0 r10: 0x0000000000000000 r11: 0x0000000110825b90
r12: 0x00007fff52f7d9a0 r13: 0x00007fff52f7e0e8 r14: 0x00007fff52f7d8c0 r15: 0x00006080000b4460
rip: 0x0000000110825ba6 rfl: 0x0000000000010206 cr2: 0x0000000000000000
Logical CPU: 1
Error Code: 0x00000004
Trap Number: 14 -
Photoshop organizer to editor and back and forth?
I was in Elements 11 Organizer switch photo to Editor and the back to Orginizer. When I tried to open editor again I was unable to.
Thank you for your response to my last message:
1. I did not import the media into PSE 10 the media was imported into PSE 11 but showed in both PSE 11 and PSE 10.
2. In PSE 11 I sent one file to the editor made changes and sent file back to organizer.
3. When I tried to send a second file to editor the editor would not respond.
4. My problem is trying open the editor for the second file.
5. I went back to PSE 10 and it was not possible to now switch from organizer to editor.
6. It appears to me that PSE 10 is interacting with PSE 11 and that neither program is operating properly.
7. Back in Dec. 2012 I was having a similar problem with PSP 11 and allowed an Adobe Tech. to operate my computer
and two days of manipulation he said everything was working. Being it was late at night he signed off. I did find out that he
messed up my computer so badly that it took my computer tech. close to a week to get me back on the air. I was so disgust with
Adobe at this point this point I was about to eliminate all Adobe Programs.
8. As not able spend any time with programs up till now I tried again only to find that the same problem exists only worse I considering
placing all media on a DVD and deleting PSE 9, PSE 10, PSE11 and PSP 11 from computer and the just reinstalling PSE 11, PSP 11
and the media on the DVD and see if the programs in question will work properly If they will not I will look for a new photography
program other than what is available from Adobe.
Thank you I will await you response before taking farther action:
Morrie -
Windows 8.1 - Have loaded PSE12 and Organizer works fine - not able to open Editor!
Windows 8.1 - Have loaded PSE12 and Organizer works fine - not able to open Editor! - I get the moving band - but nothing! Any suggestions - it has worked until the computer crashed and I have reloaded it (several times) and yet Editor won't open - how frustrating!.
I think you need to contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Adobe ID, and signing-in
3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Ask to be transferred to technical support. Have your serial number available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on.
Click here to get help now Contact Customer Care -
I was in editor and got a scratch something or other is full. so I went to help and it said add plugins locations, so per the instructions I went to preferences and changed my scratch/plugins to the C drive. Now editor will not launch, just organizer.
Do you have JSON backups that Firefox keeps in the bookmarkbackups folder?
If you use the Time Machine then you can try to restore the places.sqlite file.
*http://www.apple.com/support/timemachine/
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
Error when trying to access the RBAC User editor and Message tracking
Hi,
I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue.
https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
I then checked the event logs on the server and saw the below error logged;
Current user: 'Domain/Server Services Accounts/administrator'
Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
--- End of inner exception stack trace ---
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.default_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
Any ideas as to what the above event log is specifically referring to?Hi,
From your description, I would like to clarify the following thing:
If you want to search message tracking logs, the account you use should be a member of the role groups below:
Organization Management role group, Records Management role group, Recipient Management role group.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
Adobe Photoshop Elements 11 and Organizer does not launch.
I just installed Adobe Photoshop Elements 11 and have tried to lauch Organizer so I can do the lessons in the Adobe Photoshop Elements 11 classroom in a book. I followed the instruction outlined in "creating a new catalog" BUT when I click on the ORGANIZER button there is no file icon. So I opened the PHOTO EDITOR and tried to open organizer there... when I clicked on the ORGANIZER button it still would not launch. I am very frustrated! Please help!!!!
Are you in the Adobe Download Assistant? You should be able to click on the cancel button next to the download button if so.
Please try initating a direct download of the software by following the directions listed at http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l. Please make sure you complete the Very Important Instructions section prior to scrolling down and clicking on the download links. -
CMS-Transport Studio: Link Transport Organizer is disabled
Dear Experts!
When I using Change Management Service- Transport Studio, I see that the link Transport Organizer is disabled with information
" Change and Transport System not configured for the selected Track" , I already config CMS and TMS as the document guide.
Please help me resolve this problem.
Thanks all.Hello Thao
The situation looks more like an configuration issue, very
probably caused by the error concerning the name of the RFC destination
(note 1003674): Please ensure that the destination is named
'sap.com/com.sap.tc.di.CTSserver', with only capital 'CTS', but
completedly small 'server' at the end.
Thanks
Kenny -
Premier elements 13 will not open after logging in.
donaldc
Let us go through the typical drill on your Premiere Elements 13 Window 8.1 64 bit issue, and then we can focus in more based on your replies.
1. Does the problem exist with and without the antivirus and firewall(s) disabled?
2. Are you using a pen and tablet device or mouse?
3.According to the Device Manager/Display Adapters, what video card/graphics card does your computer use? How many cards, and is driver version
up to date?
5. Are you running the program as Administrator? Do you have the latest version of QuickTime installed on your computer?
Please look at the following solutions for 12 to determine if they will work for you in 13.
ATR Premiere Elements Troubleshooting: PE12: Premiere Elements 12 Editor Will Not Open
Have you tried to open the program by going to the Adobe Premiere Elements.exe file, right clicking it and selecting/applying Run As Administrator, and then double
clicking that file to open the program?
If none of the above works, then delete the Adobe Premiere Elements Prefs file in the path
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
13.0
and in the 13.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then delete the whole 13.0 Folder in which the
Adobe Premiere Elements Prefs file exists. Be sure to be making with Folder Option Show Hidden Files, Folders, and Drives enabled so that you
can see the complete path cited.
We will be watching for your results. Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR -
Editor to Organizer Disfunction
When I fix a photo in either full edit or quick edit, close the editor and go back to organizer instead of getting the photo I was working on coming up, I am sent back to the first photo in my catalog. I then have to scroll through my many photos to get back to the picture I was working on. Is this a bug? Was a functionality which used to be in all other Photoshop Elements programs overlooked? Is there a fix for this?
HI,
Which version of PSE are you using?
I guess the behavior is same over the different versions of PSE.
Please give detailed steps of what is happening and what result you expect?
Thanks
andaleeb -
CSS Editor in Eclipse hijacked/disabled
Flex sets itself as the default CSS editor in Eclipse, whihc
is fine.. except that I prefer the WST CSS editor that is installed
with the WST toolkit that you can get from Eclipse.org.
So.. going to "Preferences>General>Editors>File
Associations" I can set the default CSS editor back to the WST CSS
editor, and even delete the Flex CSS editor - but doing that just
gives me "plain text" css files (black font, no code completion,
Outline View etc).
But - if I go into "Help>Manage Configuration" and DISABLE
Flex - I get my CSS editor back!
SO - does anyone know how I can have Flex ENABELD *and* have
my referred CSS editor..?
Cheers,
Seanzydecode wrote:
> Flex sets itself as the default CSS editor in Eclipse,
whihc is fine.. except
> that I prefer the WST CSS editor that is installed with
the WST toolkit that
> you can get from Eclipse.org.
>
> So.. going to "Preferences>General>Editors>File
Associations" I can set the
> default CSS editor back to the WST CSS editor, and even
delete the Flex CSS
> editor - but doing that just gives me "plain text" css
files (black font, no
> code completion, Outline View etc).
>
> But - if I go into "Help>Manage Configuration" and
DISABLE Flex - I get my CSS
> editor back!
>
> SO - does anyone know how I can have Flex ENABELD *and*
have my referred CSS
> editor..?
I don't know if this is the problem, but Eclipse remembers
the last
editor used to open a file. So, if you have a file called
foo.css and
open it with the Flex CSS editor, that file will open with
the Flex CSS
editor the next time you open it even if you have changed the
file
association for .css files. But files that you haven't opened
before
should open with the editor specified by the fila
associations.
Here's something to try: Right-click on your CSS file and
choose the WST
editor from the "Open With" submenu. That file should then
open with the
WST editor on subsequent openings.
-- Greg Dow
-- Adobe Flex Builder Team -
Help move photos from editor to organizer
This should be an easy task and I am familiar with editing a photo taken from the organizer and then returning it to an album or folder. My problem is with a photo sent to me as an attachment to an email in another program (often Picasa). This photo can be opened in Elements Editor and worked with in the usual fashion but I am stumped on how to then move it in my Organizer and appropriate folder or album. Would appreciate some advice.
1. When you finish editing use File >> Save As; then choose a folder where you want it saved.
2. To add to an album drag an album icon on to the thumbnail in Organizer.
Maybe you are looking for
-
Disable scrolling animations in Mail
Hi everybody, I really like the new Mail-App in Lion. But is there a possibility to disablle the scrolling-animation (wenn you press FN+Down/Up-Arrow-Key) in Mail that it behaves like Snow Leopard Mail. If you want to flip through multi-pages-mails v
-
15 inch early 2011 Macbook Pro to Mid 2010 27 inch Imac Target Display Mode
Hi Guys I have a early 2011 15" Macbook Pro with thunderpolt port aswell as a Mid 2010 27" iMac with MiniDisplay port. I am trying to use the iMac as a second screen for my Macbook. Both has Mountain Lion on them. I have both Thunderbolt to Thunderbo
-
Is creating empty views really necessary?
I have a view_A (UIView class), and then i create a subview (view_background) using UIImageView, and then add another subview to the master view of a UIWebView style (UIWebView), and then an overlay view to catch touches view_overlay. My question is,
-
My macbook wont except my administrator name even after I reset my admin pasword and keychain login password so I am unable to install or make any account changes. I can't even install any software. Suggestions anyone? I've been at this for hours now
-
I inadvertenly clicked on HD when purchasing a season's pass for a tv show, In the midst of the download of the first episode I discovered my mistige. How can I change the purchase to SD before it downloads any more episodes?