Editor suggestions

Hi people!,
Some days ago, i had formated my pc, and now, after reinstall the netweaver, the sap editor suggest how to autocomplete the commands -ok- but if i want to select the word suggested, i have to do it JUST with TAB key.
I want to do it with ENTER key, as in the past.. and looking for this option, i couldn't find it in Utilities/Settings.
Can anybody tell me when this option is??!!
Thanks in advance!!

i saved this one more time, and quit editor, i come back and the Enter is selected in the options, but still not working..
and here is the content of the xml file:
Code Completion
Parameter Value
AutoCompletion X
Auto Open complition list X
Delay for Auto Open complition list 1500
Use External dictionary
Use local dictionary
Use simple autocompletion X
Show Quick Info X
Show Code Hints X
Chars should be saved to show Code Hints 2
Autohide ToolTip X
AutoHide delay for ToolTip 3000
Display current scope X
Transparency of ToolTips (%) 100
Display Quick Info on hovering X
Delay befor display Qick Info on hovering 500
Version 710 final release
7100.1.0.3050
Edited by: pampeano on Oct 8, 2009 11:46 PM

Similar Messages

Creating less expensive small xSAN for 2 editors - suggestions?

I've been setting up a second editing bay for our company which is supposed to have identical capabilities to my own. It's a Quad with Kona LHe, just like I'm using. We mostly edit TV comercials in DV50, uncompressed 10bit SD and DVCProHD 720P so our bandwidth requirements usually out spec editing over ethernet.
Since both editors need to have equal capability, I have chosen to create a small xSAN to allow both editors to access the same media drives simultaneously. With a SAN, large server volumes (located on a fibre channel network) show up on the editor computers just as a simple local hard drive would at very fast speed. You can point FCP scratches to the same places on each machine, then use any machine to edit any project instantly. My budget is large by my standards, but not very large on the scale of typical xSAN implementations so I've been collecting "deals" on the gear I need before I put it all together.
Since I'm on a budget, it has been fun finding much of the gear on ebay, etc. FYI, here is a quick list of the stuff I've acquired:
xServe RAID 5.6TB refurbished from Techrestore.com: $5900
xServe 2Ghz Metadata controller w/ Tiger Server 1.5GB ECC RAM, PCIX fibre card new, but last year's model from Smalldog: $2600
Brocade Silkworm 3200 8 channel 2Gb entry fibre switch new on ebay: $950
2 PCI Express fibre cards new for 2 editor G5 quads: $1100
3 xSAN licenses new on eBay: $1300
Mini GB ethernet network stuff and switch (for metadata only - separate from our LAN network): $150
Misc. fibre cables and tranceivers: $700
One of my editing G5's will act as the fallback Metadata controller in case the xServe goes down at any time.
I also am planning on at least 8 hours of time from a local xSAN authorized tech to help me set everything up and teach me what I need to maintain the system. This should be about $700 or so.
I have found several articles posted at xsanity.com very helpful in planning this.
If any of you have any experience with xSAN, you might agree this is a very low cost of entry into this very exciting new workflow. $13.5K for a fully functioning xSAN of this size is not bad at all. Many would spend that on the xServe RAID alone, sans SAN;-) And I can expand very easily since my switch will still have 3 unused ports. Note: the 5.6TB xServe RAID will only be about 4TB after accounting for the RAID 5 and dedicated (and mirrored) metadata volumes. Only 4TB. Pity!
Now that I have the main hardware components ready, it's time to install and setup the system. I'll be posting my progess in the next few weeks as this happens, but first would like to hear any impressions on this. Suggestions or warnings are appreciated by those with experience with xSAN. The xSAN forum here at Apple is used mostly by IT professionals and I'm mostly interested in hearing comments from editors and those that use the system in small settings like my own.
One question for the Gurus: I don't believe FCP projects can be opened and used by two people at the same time, but if there is a way to do this without corrupting the project file, I would love to know.
I'm also seeking to hire an assistant to occupy the new editing bay. Broad multimedia skills are needed, but I can train to a degree. We're an advertising agency just north of Salt Lake City, Utah. Please let me know if any of you are interested.

Thanks for the suggestions. Brian, I'll be sure to get you some points once I close the topic.
I didn't realize the Project files are best copied to the hard drive. Is this for a permissions related reason or just to avoid short spikes in bandwidth during saves?
I agree that Metadata is best on a dedicated controller with full scale xSANs, however with just 2 systems editing mostly DVCPro50 resolution projects I can't imagine burning up more than 100MB/sec at any given time. OK, maybe, but this is unlikely for next year or so. I've read that a single controller can achieve 80MB/sec easily, so 2 should be around 150MB/sec under heavy load. I'll have the metadata mirrored to 2 drives on one side of the XSR and the remaining 5 drives on that controller in a RAID 5. The other side of the XSR will be a full 7 drive RAID 5. These 2 data LUNs will be striped together in xSAN to achieve a full bandwidth of about 150MB/sec. I was told that the XSR controller can handle multiple RAID's at the same time so I can send metadata to one mirror array and designate the other as a RAID 5 LUN. Considering the small size of the data going to the metadata volumes and the relative simplicity of RAID 1 mirroring, I believe the controller shouldn't be adversly affected by this. Is this incorrect in your experience?
I do plan on turning off the cache of the XSR since the system will be used for editing, yet it would be nice to have cache for the metadata so that's a point to consider.
THe metadata should be segregated on its own XSR controller.
Are you saying that the metadata sharing the same controller as the video data is going to slow the whole system down even though the metadata is located on separate, dedicated drives in that controller? I thought metadata was tiny and required very little bandwidth on the bus of a controller. If this is the case, the only bottleneck would be the RAID chip in the XSR. Again, these metadata files are very small and RAID 1 is very simple, so I don't see how it could slow things down enough to justify another $4K for a new XSR. If you still disagree, please let me know.
As per your suggestion, and considering your stellar reputation in this forum, I'm shopping right now for a mostly empty xServe RAID to use this for just the Metadata volumes mirrored. It just seems like a huge waste to get an XSR just to use 2 drive bays mirrored. The plus side of this is I could begin filling the other controller in the future as my storage needs expand.
It would be really cool to use the 2 drive bays in the Xserve Metadata controller for the metadata volumes, but I can see how that would cause problems if the xServe goes down, making the metadata invisible to the fallback MDC. 100% uptime isn't that big of a deal for me, however. As long as the XSAN comes back online safely after the xServe reboots without trouble, I'm OK with such a setup. Have you ever seen this done? It seems a bit of a hack to use anything but fibre channel data. I'd hate to introduce too much complexity just to save some bucks, but it is an intriguing idea and would cost a fraction of a new XSR. It would be fast since the writing the metadata would be local with very little latency.
For this reason, I'm also very interested to find any other simple and less expensive Fibre based storage solutions that could host my metadata as an alternative to full blown XSR for this. There are all kinds of fibre drives out there, but I don't want to waste a valuable fibre switch port just for one drive. All I need is 2 hardware mirrored bays accessible over fibre, preferably sharing the same channel on my switch. Does anyone know where I might find something like this?

Mac mini, data sync with ipad2, + photo editor suggestion

Don't stop reading when you see the word "windows".....On windows (yes, the blasphemy OS), if I connect my ipad 2 I get an icon and can explore the ipad photos folder as if it were a removable drive, drag 'n drop, copy/paste. I havent found the same functionality on a mac. Can I add the ipad as a mount device? Also, what's the best file synching app avail avail from the app store. I want to be able to do just as I do with my other devices, sync photos, files, etc. to a designated folder (NOT A DEFAULT, UNCHANGEABLE FOLDER, but one I specify) automatically when I connect the ipad to my mac. Ive seen several solutions on the net, but most of those are the usual "install our FREE download manager app", which is usually malware. I don't mind spending a little money to get a product that will work easily but I prefer to get it from the app store to minimize risk. Also, I want to edit photos, crop, lighten, darken, selectively make changes to areas, etc.. Any ideas on a good product for mac? NOTE: Mac mini, only 8gb ram, so don't have a lot to play with. Thanks in advance for the help.

I persuaded my group to switch to iphones, and acquire ipads. I've been "volunteered" to write instruction guides on installing the software we need to use. As part of that, I need to be able to take a screenshot, copy parts of that screenshot, move parts around (buttons etc), draw arrows, insert text boxes, adjust lighting (i.e. make all but one selection dark/grayed out) to help those who are, shall we say, a bit slower at things identify the appropriate area being referenced in the document. I looked at iphoto, but it doesnt have the features.
Thanks for the suggestion on iFunBox. I don't want to use freeware on work devices due to the risk of malware. I know apple is more secure than winblows, but it wouldnt be difficult for someone to write a pretty app that does one thing on the surface while doing other things in the background. Purchased/licensed software *should* be inherently safer, as well as having vendor support for upgrades/troubleshooting.

Want to start PSE 12 in photo editor but it will only start in Orgaizer, can't get to welcome screen and the .exe file that Adobe said to look for does not exist on my files

Have tried to start PSE 12 in photo editor but it continues to start in Organizer. I do not want my pictures loaded in Organizer at all. Saw a page on the web that said to click on an .exe editor file but that is not on my files. Also cannot get a welcome screen to come up, only an organizer even though I checked it the first time to come up in photo editor. I'm now having Organizer crammed down my throat. Tried online chat but was cut off with the statement that no support is offered for v12 any longer.

Hi,
You failed to say which operating system you are running on so I'm assuming it is Windows of some type.
You should be able to find the following files, using explorer, depending on your system.
64bit system: "C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe"
32bit system: "C:\Program Files\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe"
Double clicking on that should start the editor - suggest to create a shortcut to it.
If you can't find one of those files, then you either installed it somewhere else or you need to re-install elements.
Brian

What is the text editor that comes with a Mac?

What is the text editor that comes with a Mac? My daughter purchased a new MacBook Pro. She wants to move her iTunes from the old Windows XP system to OSX. One of the ways I have found to do this is to move theXML Library from XP toi OSX and edit it. The XP version has the drive letter paths and that is different in OSX. If I knew what editor was available, then I could do a mass change of the old path to the new one. Any editor suggestions?

Hi motero,
TextEdit is essentially a word processor. You can find detailed information about it [here|http://support.apple.com/kb/HT2523].
Moving an iTunes library from one computer (PC or Mac) to another is very easy and can be done in a number of different ways. You should read the articles [here|http://www.apple.com/support/itunes> and decide which method is best for you.
Thanks,
Acros-Krik

I can't paste text at the WYSIWIG editor in FireFox 17.01

After the upgrade to FireFox 17.01 the HTML WYSIWIG editor restricts some actions; by example cut/copy and paste.
The editor suggests in the past 4 steps to enable those actions but does not works with this version.
Any clues?
Thanks.

If the problem is with the editor's buttons, could you provide a link to the relevant instructions?
If the problem is with Firefox's native functionality --
* Right-click Cut, Copy, Paste
* Ctrl+x, Ctrl+c, Ctrl+v
* Edit menu Cut, Copy, Paste
-- then it could be that the site's scripts are intercepting those actions and not allowing them to complete. To disable sites from altering those command, you can change a preference:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''clipb''' and pause while the list is filtered
(3) Double-click '''dom.event.clipboardevents.enabled''' to switch its value to false. You're done with this tab.
You might need to reload the page in order for this to take effect.

Sql Update Statement (complex)

Hi ,
A very good morning to all.
I am stuck in a problem , and i really hope for solutiion.
I have a dimension table (DIM_CAR) for which i need to write a update statement.
My table structure is :
C_ID           Startdate                       EndDate
7546343   2012-05-29 00:00:00   NULL
7546343   2012-05-18 00:00:00   2012-05-29 00:00:00
7546343   2012-05-14 00:00:00   2012-05-18 00:00:00
7546343   2012-05-10 00:00:00   2012-05-10 00:00:00
7546343   2012-05-10 00:00:00   2012-05-14 00:00:00
7546343   2012-03-22 00:00:00   2012-03-22 00:00:00
7546343   2012-03-15 00:00:00   2012-03-22 00:00:00
7546343   2012-02-02 00:00:00   2012-03-15 00:00:00
7546343   2012-01-31 00:00:00   2012-02-02 00:00:00
Now the scenario is Whenever any update comes in car , then it closes the previous record and open a new record(SCD)
For e.g the 1st update comes on 2012-02-02 , so it closes the last record (by putting 2012-02-02) in end date and open a new record by putting 2012-02-02 in startdate. Then update comes in 2012-03-15 and so on. The last record is for 2012-05-29 which is
still open as there is no update after that,
so whenever any update come it opens a new record with startdate value is extract date and enddate value NULL and closes the previous. Then after another update , that NULL value is replace by the new date and another record opens.
My prob is if you will closely analyse the dates , then there are some records missing in the above table due to which there are discrepencies in dates.
E.g. If u see the 6th row, startdate is 2012-03-22 and enddate is also 2012-03-22. But here in this case the enddate should be 2012-05-10(which is next update)
I need to write a sql script to update enddates with the latest update startdate in my table. I have 60000 of C_id which are affected.
COULD ANYONE plz Help.. I knw its difficult but u can give a try ..........Plz ask if anyone requires more info.
Abhishek

Please post DDL, so that people do not have to guess what the keys, constraints, Declarative Referential Integrity, data types, etc. in your schema are. Learn how to follow ISO-11179 data element naming conventions and formatting rules. Temporal data should
use ISO-8601 formats. Code should be in Standard SQL as much as possible and not local dialect.
This is minimal polite behavior on SQL forums.
>> I have a dimension table (DIM_CAR) for which I need to write a update statement. My table structure is : <<
NO! This is a picture of the data; it is not DDL! Is this what you would have posted if you had manners?
CREATE TABLE Foobars
(c_id CHAR(7) NOT NULL,
foo_start_date DATE NOT NULL,
PRIMARY KEY (c_id, foo_start_date), -- my guess!!
CHECK (foo_start_date < foo_end_date),-- another guess!
foo_end_date DATE);
INSERT INTO Foobar
VALUES
('7546343', '2012-05-29', 'NULL),
('7546343', '2012-05-18', '2012-05-29'),
('7546343', '2012-05-14', '2012-05-18'),
('7546343', '2012-05-10', '2012-05-10'),
('7546343', '2012-05-10', '2012-05-14'),
('7546343', '2012-03-22', '2012-03-22'),
('7546343', '2012-03-15', '2012-03-22'),
('7546343', '2012-02-02', '2012-03-15'),
('7546343', '2012-01-31', '2012-02-02');
Now the scenario is Whenever any update comes in car, then it closes the previous record [sic: rows are not records! Please learn basic terms] and open a new record [sic](SCD).
What is “SCD” and why do you think it is meaningful to us? Here is an article on this topic.
Modifying Contiguous Time Periods
This article explains how to modify contiguous time periods that were described in Joe Celko’s article 'Contiguous Time Periods in SQL'. Joe describes the table itself that he calls the 'Kuznetsov History Table'. He explains how it is used to store contiguous
time intervals with constraint to ensure that the date periods really are contiguous, The editor suggested that I give a brief description of how to modify the data in the History table as this may not be entirely obvious.
When trusted constraints enforce data integrity, the data is guaranteed to be valid at the end of any statement, even if it is not committed. When we modify contiguous time periods, in order to get from one valid state to another we may need to insert a row
and update another one, or we may need to delete a row and update another one. This is one of those cases when MERGE really shines – it allows us to get from one valid state to another in one statement, inserting, updating, and deleting rows as needed.
CREATE TABLE Tasks
(task_id INT NOT NULL,
task_score INTEGER NOT NULL,
current_start_date DATE NOT NULL,
current_end_date DATE NOT NULL,
previous_end_date DATE NULL,
CONSTRAINT PK_Tasks_task_id_current_end_date
PRIMARY KEY (task_id, current_end_date),
CONSTRAINT UNQ_Tasks_task_id_previous_end_date
UNIQUE (task_id, previous_end_date),
CONSTRAINT FK_Tasks_task_id_previous_end_date
FOREIGN KEY (task_id, previous_end_date)
REFERENCES Tasks (task_id, current_end_date),
CONSTRAINT CHK_Tasks_previous_end_date_NotAfter_current_start_date
CHECK (previous_end_date <= current_start_date),
CONSTRAINT CHK_Tasks_current_start_date_Before_current_end_date
CHECK (current_start_date < current_end_date)
Some Easy Modifications.
It is easy to begin a new series of time periods
INSERT INTO Tasks
(task_id, task_score, current_start_date, current_end_date, previous_end_date)
VALUES (1, 100, '2010-1002', '2010-1023', NULL),
(1, 80, '2010-1023', '2010-11-03', '2010-1023');
It is just as easy to continue adding periods to the end of the series.
INSERT INTO Tasks
(task_id, task_score, current_start_date, current_end_date, previous_end_date)
VALUES(1, 98, '2010-11-20', '2010-11-25', '2010-11-03'),
(1, 75, '2010-11-26', '2010-11-27', '2010-11-25');
Deleting one or more rows from the end is just as easy, and we shall skip the example. As we have seen, it is easy to perform typical, the most common operations against history of periods.
However, some other operations are less easy and need more explanations. Now that we have enough test data, let us move on to more complex examples. Here is the test data at this moment:
Adding periods to the beginning.
Each series of periods has exactly one first period – this is enforced by the following constraint: Unique_task_id_and_previous_end_date
As a result, when we are inserting one or more periods to the beginning of the series, we have to update the period that used to be the first, as follows:
MERGE INTO Tasks
USING (VALUES (1, 98, '2009-03-01', '2009-03-06', NULL),
(1, 100, '2010-10-02', '2010-10-23', '2009-03-06')
) AS Source (task_id, task_score, current_start_date, current_end_date, previous_end_date)
ON Tasks.task_id = Source.task_id
AND Tasks.current_start_date = Source.current_start_date
WHEN MATCHED
THEN UPDATE
SET task_score = Source.task_score,
current_start_date = Source.current_start_date,
current_end_date = Source.current_end_date,
previous_end_date = Source.previous_end_date
WHEN NOT MATCHED
THEN INSERT (task_id, task_score, current_start_date, current_end_date, previous_end_date)
VALUES (Source.task_id, Source.task_score, Source.current_start_date,
Source.current_end_date, Source.previous_end_date);
Now we will verify that our test data looks as expected, with a new row at the beginning, and previous_end_date column is modified to point to the new row for the row that used to be the first before this modification:
We are also going to discuss some other scenarios, such as adding/deleting periods in the middle of the series. In all these cases we shall be using MERGE, and the DML looks quite similar, so let us wrap it up in a stored procedure.
CREATING A STORED PROCEDURE
The following code implements this merging functionality with a stored procedure that uses a table to hold teh new rows:
CREATE TABLE NewTasks
(task_id INTEGER NOT NULL,
task_score INTEGER NOT NULL,
current_start_date DATE NOT NULL,
current_end_date DATE NOT NULL,
previous_end_date DATE NULL,
deletion_flg CHAR(1));
CREATE PROCEDURE MergeNewTasks
AS BEGIN
MERGE INTO Tasks
USING (SELECT task_id, task_score, current_start_date, current_end_date, previous_end_date, deletion_flg
FROM NewTasks) AS Source
ON Tasks.task_id = Source.task_id
AND Tasks.current_start_date = Source.current_start_date
WHEN MATCHED AND deletion_flg = 'Y'
THEN DELETE
WHEN MATCHED
THEN UPDATE SET
task_score = Source.task_score,
current_start_date = Source.current_start_date,
current_end_date = Source.current_end_date,
previous_end_date = Source.previous_end_date
WHEN NOT MATCHED
THEN INSERT (task_id, task_score, current_start_date, current_end_date, previous_end_date)
VALUES (Source.task_id, Source.task_score, Source.current_start_date, Source.current_end_date, Source.previous_end_date);
END;
Let us use this stored procedure.
Filling a gap in the middle of the series
The following code fills the gap on November 25th.
CREATE TABLE NewTasks (..);
INSERT INTO NewTasks
(task_id, task_score, current_start_date, current_end_date, previous_end_date, deletion_flg)
VALUES (1, 75, '2010-11-25', '2010-11-26', '2010-11-25', 'N'),
(1, 80, '2010-11-26', '2010-11-27', '2010-11-26', 'N');
EXEC MergeNewTasks NewTasks = NewTasks;
Here is the data after this modification, with a period added in the middle fo the series:
Deleting a period in the middle of the series
The following code deletes the period added in the previous example.
CREATE TABLE NewTasks (..);
INSERT INTO NewTasks
(task_id, task_score, current_start_date, current_end_date,
previous_end_date, deletion_flg)
VALUES (1, 75, '2010-11-25', '2010-11-26', '2010-11-25', 'Y'),
(1, 80, '2010-11-26', '2010-11-27', '2010-11-25', 'N');
EXEC MergeNewTasks;
Here is the data after this modification:
Inserting two periods in the middle, and adjusting an exaisting period to make room for them. This is the last and most complex example involving our stored procedure:
CREATE TABLE NewTasks (..);
INSERT INTO NewTasks
(task_id, task_score, current_start_date, current_end_date, previous_end_date, deletion_flg)
VALUES (1, 98, '2010-11-20', '2010-11-22', '2010-11-03', 'N'),
(1, 75, '2010-11-22', '2010-11-23', '2010-11-22', 'N'),
(1, 98, '2010-11-23', '2010-11-25', '2010-11-23', 'N');
EXEC MergeNewTasks;
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Update error with graphics card

Hi All, if anyone can help me fix this error I will be most aprreciative.
I get this error when I open After Effects.
Ray-tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0 or later. For now, ray tracing will use the CPU.
After installing CUDA 5.0 or later, restart your computer.
For more information see: http://www.adobe.com/go/aeraytracegpu
Im on a MAc Pro Desktop running latest OSX (OS X 10.9.2 (13C64) and a
Graphics Card: ATI Radeon HD 5770 1024 MB (not a NVIDIA its AMD)
I have tried updating software and the operating system as this is now with recent versions do apparently.
Kind Regards Toby.
Motion Designer / Editor

I suggest you post on the Adobe forums since it's their software you're having problems with and this forum is for trouble shooting Apple Software Update app for Windows, which is not related to your question in any way.
http://www.adobeforums.com

I also need information about use the ProConnect(r) Integ...

I also need information about use the ProConnect(r) Integrated KVM 2-Port Switch to connect a Mac G4 and a PC anyone help
software reviews editor

I suggest you to go to linksys website & it will give all required information ,,,
Or you can try this link ....

Another little anomaly with cross disolve

I inserted six little clips into the timeline (about 45 seconds total). Individually I dragged and dropped the "Indie Red" effect and waited until the rendering was done. I selected all the clips and did command + t to add a cross dissolve.
I waited until rendering was done.
I selected them all and created a compound clip and then played them to make sure all transitions worked fine.
They Did.
I detached audio and then ALL the cross dissolve transitions just turned black with no dissolve at all.
I was going to add a music track.
My solution was the leave the audio track and drag the volume to nothing and then add the music track.

Hi Susan
You can't ake assymetrical dissolves in FCP - I miss it from Avid too.
I don't think there is any difference between the result of of making a dissolve the way you want to and just rolling your cut point back ten frames and make a starting from cut dissolve. The two dissolves should look exactly the same.
Hope that helps
Jim
I'm cutting on a film that needs long transitions
with dissolves that are not centered, ending or
starting on the cut, i.e. 60-frame dissolve with
10-frames before the cut - quite an easy thing to do
on Avid, but as I am still new to FCP, I'm not sure
where to find it?
Double clicking the transition allows me to adjust
the dissolve but only as a centered, starting at or
ending at....another editor suggested that I keyframe
the opacity in, but that is really timeconsuming and
cumbersome. Any suggestions would be
appreciated....thanks!
Susan.

Problem with ripped MPEGs in Encore CS3

A friend had created a DVD (with either Windows Movie Maker or Nero; not sure which), but I wanted to redo the menu (his was really lame). His software created four .VOB chunks of the 50-minute video.
I ripped these chunks, renamed them as .mpg, and imported them into Encore 1.5 (which I had at the time) as four separate timelines. All four chunks imported OK, but I had to transcode the last three before placing them on timelines. I created a new menu, and burned a new DVD. However, playback on both my computer and my DVD player had noticeable pauses between each timeline chunk (my friend's original DVD does play back seamlessly). I tried both linked timelines through end actions and a playlist - same result.
I upgraded to Encore CS3 because it now can add more than one video file to a single timeline, thinking that would eliminate the pauses between the chunks and I'd get seamless playback. However, when importing the original .mpg chunks into Encore CS3, I get noticeable noise, in the form of green macroblocking in the first few frames of the 2nd, 3rd, and 4th chunks, which were NOT present in Encore 1.5. (I see the same noise when importing these chunks into Premier Pro CS3.) Also, Encore CS3 marks these last three video chunks as "Don't Transcode", but when I place them on the single timeline, there is no audio.
I've read through and understand the several Forum threads about the difficulty of working with ripped DVD files. I'm not trying to do any sort of editing on the video chunks. However, I tried some of the MPEG editors suggested in these threads to create a single .mpg file, but they have their own problems with this.
The original AVI file has been lost. I could recreate it from the source VHS tape, but have been trying to avoid that.
Anyone have any thoughts about this? If the behavior I described above in the two CS3 packages is a potential bug, I would be happy to submit a bug report to Adobe.
Thanks

Sorry to say this really is not a bug.
The kind of thing that you're trying to do is something Encore was never intended to be capable of doing - it's that simple.
Renaming a VOB file to mpg is a workaround to try & force import of a format that is essentially designed to be on a completed, compiled DVD-Video disc. It is not the same as properly demiltiplexing the stream. A VOB file on a DVD is a Video OBject.
The way this works (structure wise) is like this:
VTS_01_0.VOB = the menus for VTS 1
VTS_01_1.VOB, VTS_01_2.VOB, VTS_01_3.VOB, & VTS_01_4.VOB are all separate parts of the same timeline - VTS 1.
They are split into 4 because the timeline after encoding will have between between 3 & 4Gb in size. The way DVD-Video gets compiled will take a single encoding of 3.5Gb and break it into seamless chunks of 1 or less Gb each.
These VOB files contain everything - including any subtitles.
They are not designed to be edited.
The safest way to get seamless use - assuming that you absolutely must rework files - is to jouin all the 4 VOB files together using a simple command line instruction.
(copy /b VTS_01_1.VOB+VTS_01_2.VOB VTS_ALL.VOB)
The /b switch is for a binary copy, and although I am uncertain if this is absolutely required or not, it is how we join up the 2 .DAT files when restoring DLT tape content to DVD-R DL discs)
Renaming this to a .mpg file may give you the seamless playback you are looking for.

Illustrator File Icons are White?? Windows 7

I seem to have lost my icons for Illustrator CS2 and InDesign CS2 files. The files show as a standard white "page" icon, instead of the program icon. Since I often have multiple Adobe file formats in one folder, it makes it difficult to distinguish which ones are Illustrator vs. InDesign. Oddly enough, Photoshop files and GoLive site files show their icons for files.
I read elsewhere online that this could be caused by a cleaning utility program such as CCleaner when "{GUID} folders are deleted from C:\Windows\Installer." However, I can't find the answer as to how to FIX it.
I have tried using Windows>Default Programs>Associate a file type or protocol with a program to check that Illustrator and InDesign are set as defaults to open the files. I found that the programs were set to shortcuts within the Adobe folder. I fixed that by deleting the shortcut and putting the actual program link as the source to open the program. (Actual program .exe file was located within Adobe Illustrator> Support Files>Contents>Windows.)
Also, I have the Adobe CS2 Suite installed under Program Files (x86).
Thanks for any insight you can provide!

Update: I used the program Default Program Editor suggested in this thread. It easily fixed my blank Illustrator icons, but my will not fix my InDesign icons, which still show as blank white pages. Well, I'm halfway there, at least.

Cannot use Photoshop CS5 to edit in PSE 5

When I try to"edit in Photoshop" with Photoshop Elements 5, Photoshop CS5 loads, but the photo does NOT, and I get this error:
"an error occurred while attempting to edit the file in the external editor"
Suggestions?

I wish I could solve your problem but I can only broaden it: I'm having a problem with editing as well from PSE7. PSE does properly pass a JPEG over to CS5 but when I save the file as a JPEG in CS5 it asks if it is OK to overwrite rather than just allow the save. If I exit immediately after saving the JPEG it prompts me to save it as a PSD. Whether I save again or not when I return back to PSE the edited JPEG and PSD files are gone and the image is locked in the Organizer. I had to exit the organizer, restart the program and remove the edited version from the Organizer - which complains because the file is missing. Perhaps there's a trick to enabling these programs to integrate cleanly but I haven't figured it out yet.

How to dynamically assign assignee for human task?

I tried to use xpath expression in task editor. Expression editor suggested me to use task schema and I could not use variables from process.
I had selected systemMessageAttributes.textAttribute1 and created “Assign” activity to initiate the attribute. This does not work. When task is started assignee is empty and task is automatically completed.
Does anybody used this feature?

Hi,
You can run the soa server in debug mode by adding remote debugging parameters in startWeblogic.sh of soa server and remote debug it to check problems.
e.g.
+#For Debug Port+
+if [ "${SERVER_NAME}" = "soa_server1" ] ; then+
+JAVA_OPTIONS="${JAVA_OPTIONS} -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=9023,server=y,suspend=n"+
+export JAVA_OPTIONS+
+fi+

Change name of iCloud

I have 3 different icloud accounts.
How can I recognize them in my contacts.
They are all called "all icloud" and I would like to rename them to the different account names.
Does anybody know how to do this?
Thanx

I had the same issue but think I have a work around. It isn't pretty but it seemed to work for me.
Go to your <user>/Library/Application Support/AddressBook/Sources folder
In this folder you will see folder names consisting of numbers and letters: One for each of the accounts you have in your Address Book
Open each folder and edit the 'Configuration.plist' file with a text editor (suggest you don't use your Mac 'TextEdit' app since it risks saving it as a Rich Text file which can cause issues. Try something like TextWrangler or TextMate which are designed for this job. I suggest you duplicate the file before you do so you have something to go back to.
In the file, you will see the iCloud account name helping to identify which account this is dealing with. Search this string '<key>name</key>' then in the line below you will find '<string>iCloud</string>'. Replace the name between the 'strings' with your preferred name. All standard text is supported. eg '<string>Family's Contacts</string>'
Save the file and repeat for each account you want changed.
Restart Address Book then bingo, all good.

Editor suggestions

Similar Messages

Maybe you are looking for