Edits are not saving in my contacts.

When I add edits to my contacts, they are not saving. Anyone else having that issue? How do I resolve?

Hi there,
If you are using iCloud to sync your contacts then I would recommend taking a look at the troubleshooting steps found in the article below. Specifically the steps found under the section titiled "Troubleshooting iCloud Contacts update or setup issues with Contacts on OS X Mountain Lion (or Address Book on OS X Lion)"
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/TS3998
-Griff W.

Similar Messages

HT2486 birthday are not saving in my contacts? What am I doing wrong. I always have put in birthday before with no problems

Birthday are not saving in some of my contacts? What am I doing wrong. I always have put in birthday before with no problems. Some contacts it works and others do not? help me.

Arnis and Jeff,
Thank you both very much for your assistance. I was able to figure out why the Adobe Application Manager kept failing on installing the patches. Idiot me didn't unzip them first. Once I unzipped the patch files, the installer worked fine. Both patches are now successfully installed; my FM version is now 12.0.2..
To answer some of your questions:
Yes, I have administrator privileges on my PC.
Yes, I had all of the files in the book opened when I generated and/or updated the LOR file. So that was not the issue.
With the patches installed, I opened a book and all of its files. I updated the LOR and all works fine – it gives me all of the Imported Graphic references. So there must have been an issue with that release of FM12 (12.0.0.329), which was fixed with the patches.
Again, thank you both for your help!
Best regards,
Beverly

When I edit any contacts, my edits are not saved. Why?

Any changes to my contact list (when I update email address changes, or phone numbers/postal addresses etc) the edit appears to have worked, but as soon as I back out of my address book, the change has not saved. Any ideas?

https://support.mozilla.org/en-US/questions/996474#answer-561758

Sometimes Photos edits are not saved

Since I upgraded to 7.0.2 I find that sometiems my edits do not get saved when I arrow to the next photo or when I click DONE. If I do it over and over (and maybe over ad over and over) it will finially take
I've reported this to Apple but was wondering if anyone else has noticed this and if anyone has figured out how to avoid it?
Larry Nebel

Yes, I have seen this, inconsistently. I think it is related to the same problem where altering Events does not change date range. I think this is the case because if I look for a modified image in the iPhoto package, lo and behold, there it is, even though I am still seeing the original after editing! And both issues are resolved by closing and re-opening iPhoto.
So I suspect there is a glitch with re-indexing the originals when they are altered or moved. They "tag" the folders in an Event split/switch, and they "tag" the modified when versioning. Metadata is not getting copied. My hunch. Also my hunch that this may have to do with the the new thumbnail skimming feature and the secondary "split" indexing this requires. The original or its versions are not keeping up with changes.

Hi. I just got the iPhone 6, plugged into itunes and made the mistake of putting an OLD back up on my new phone resulting in losing all contacts after 2013. They are not saved on the cloud. Is there any way to go back to before I screwed up?

Hi. I just got the iPhone 6, plugged into itunes and made the mistake of putting an OLD back up on my new phone resulting in losing all contacts after 2013. They are not saved on the cloud. Is there any way to go back to before I screwed up?

If you have performed a sync with the device since you restored this old backup, then don't bother looking for another backup. iTunes writes over the last backup each time you sync. If you were handling contacts in iCloud, you would find them by logging into iCloud. Or you can check settings and iCloud and see if the button it on for Contacts. Otherwise it might have been on the computer, if you had a program that syncs with iTunes and handles contacts, depending on the computer system you use. If Windows, it would be Windows Contacts or Outlook. If a Mac, there is a Mac Address book as well.

Edited photos will save in edited photos will not save in photoshop are being saved in my pictures on hard drive. wants me to import edited are being saved in my pictures on hard drive. wants me to import edited photos from my hard drive in to photoshop.

edited photos will save in edited photos will not save in photoshop are being saved in my pictures on hard drive. wants me to import edited are being saved in my pictures on hard drive. wants me to import edited photos from my hard drive in to photoshop.

Use iPhoto. What's the problem with iPhoto import? It's a two clicks job. Select your device and click import.

Some sent mails do not appear/are not saved in "sent messages" and are lost

i work with mail and 4 different imap accounts. about every 15th sent email "gets lost". i.e. i can follow the sending process in the activity window, and i hear the sending confirmation tone. and, usually, the mails even reach the receiver. BUT, the mails do not appear/are not saved in the "sent messages" folder and are lost. this is very unsettling, as there seems to be no recognizable pattern. can anyone help, or should i change to "entourage"? big thanks for replies
Message was edited by: Bassolino

Hi Bassolino and David,
I, too, have had this intermittent issue and wonder if you had found a solution?
In the past 3 weeks, two messages have been sent from my mac mail account, using the mail application (the only apparent common factor being that both messages had iphoto attachments), the recipients have received them - only I do not have a copy in my 'sent' folder.
They are not stored on the macintosh server either...
I have not altered any settings and this intermittent issue has just emerged.
Any help from 'Top Users' would be welcome. Thanks.

Visio 2010 - Shape Data Fields Are Not Saving

I am having a problem with a number of shape data fields which are not saving data that has been entered into it, whether by entering it through the "shape data" or "define shape data" dialog boxes, or by editing the "shape
sheet".
All data fields appear to save normally while file is open, it remains as entered. However, when file is closed and later reopened select data fields do not retaining data correctly. Some retain nothing (null), or revert back to a "default"
value, see below for a couple examples:
Rack Units: Want to enter data as 1U, 2U, etc. ... in some cases it will save it as entered while in other cases it reverts to "1 RU", "2U", etc.
Room: Enter the data as I want it stored, most of the time it appears to come back empty, there are some shapes which will retain as entered.
Comments: Fails to retain any data
I have looked at a number of reasons to explain why, whether the problems occur with stencils is supplied by Microsoft, a vendor, or were custom created. Looked into whether it might have to do with a particular vendor's stencils/drawings
but I have a number of Cisco drawings where some save those fields as entered while others do not. I believe it could be a setting within the stencil preventing it from saving the data as entered, enabled in some cases and not in others.
I have checked "Protection" under the "Developer" tab, but nothing appears to be set to prevent editing/storing data entered.
Is there some setting(s) or field(s) somewhere that I can look at to allow this data to be saved as entered?
Is there a GLOBAL setting that can be set once within a file?
Thank you in advance for your time to assist me in fixing these problems. Have a great day!
MJ_NWE
MJ

>Can I build logic so that they can't fill in a field unless the previous field has been filled in?
It's theoretically possible to do this (e.g. each field has an action
of removing read-only on the next). It's considered extremely bad form
design, because people don't always fill in fields in the order
specified. If you watch people with a form they fill in their name,
address, other easy stuff; then they go back for the harder stuff.
They may want to save a form because one piece of information needs
research.
What you might like to consider is a large splash "FORM INCOMPLETE" in
Red or whatever, which vanishes when all the fields are completed.
Aandi Inston

AET Generated field values are not saved.

Hi Gurus,
I have created two AET fields on the screen (marked below) and that should store values in table CRMD_CUSTOMER_H. When I create a new service request and enter the values and save, AET field values are not saved. Again, when I edit the same service request and enter the values and save , AET field values are saved on the database.
While debugging I found that, relationship BTHeaderCustExt does not exist for the first time and second time onward its appearing. Due to this, data is not being saved at first time (Line no 27 : current is empty).
When tried to create realtionship using create_related_entity , it throwing exception cx_crm_genil_model_error.
Please advice me the soution for the same.
Regards,
Anand

there should be a context node at your view level. Please check ON NEW FOCUS method is implemented or not.
If not, you can implement that method with below code.
    DATA: lv_collection TYPE REF TO if_bol_bo_col,
          entity        TYPE REF TO cl_crm_bol_entity.
*   get collection of dependent nodes
    entity ?= focus_bo.
    TRY.
        lv_collection = entity->get_related_entities(
               iv_relation_name = 'BTHeaderCustExt' ).
        IF lv_collection IS NOT BOUND or lv_collection->size( ) = 0.
          IF entity->is_changeable( ) = ABAP_TRUE.
            TRY.
                entity = entity->create_related_entity(
                 iv_relation_name = 'BTHeaderCustExt' ).
              CATCH cx_crm_genil_model_error cx_crm_genil_duplicate_rel.
*               should never happen
            ENDTRY.
            IF entity IS BOUND.
              CREATE OBJECT lv_collection TYPE cl_crm_bol_bo_col.
              lv_collection->add( entity ).
            ENDIF.
          ENDIF.
        ENDIF.
      CATCH cx_crm_genil_model_error.
*       should never happen
        EXIT.
      CATCH cx_sy_ref_is_initial.
    ENDTRY.
    me->set_collection( lv_collection ).

Changes are not saved in DNG

I've been experimenting a bit with saving changes made to Canon 20D Raw files to DNG, but without success. When I open the saved DNG file with Apple's Preview, it displays the file without the changes. (I've tried "Embed original raw file," and not doing so.) This leads me to suspect that if I send the DNG file to a photo processor it will print the file without my edits. I am hoping that printing DNG files, rather than JPEG, will produce greater color and tonal fidelity. I have discovered no other reason for converting to DNG that is relevant to me. Is there a way to ensure that edits are properly saved to the saved DNG?

I've been experimenting a bit with saving changes made to Canon 20D Raw files to DNG, but without success. When I open the saved DNG file with Apple's Preview, it displays the file without the changes.
This is expected and normal. Most image previewers cannot read or understand the .xmp information created by Adobe Camera Raw.
This leads me to suspect that if I send the DNG file to a photo processor it will print the file without my edits.
If you can find a photo processor that handles DNG files, it is entirely possible that it will print the file without your edits, as you suspect. That's not because the edits aren't stored in there; that's because as far as I know, only Adobe software can read and make use of the edits from Adobe Camera Raw.
If you need your edits for some external (non-PSE, non-Adobe) application, you probably need to create a .tif or .jpg.
I am hoping that printing DNG files, rather than JPEG, will produce greater color and tonal fidelity. I have discovered no other reason for converting to DNG that is relevant to me. Is there a way to ensure that edits are properly saved to the saved DNG?
A pixel that is Red 200, Green 123, Blue 13 should print the same whether that pixel is delivered in a DNG, .tif or .jpg. Of course, if you convert a photo to .jpg, that pixel may wind up with slightly different values, but if you choose high quality .jpg, I don't think the human eye can see the difference, and if it could, I suspect the difference would not be "color and tonal fidelity"; instead the JPG would show artifacts. If you are experiencing problems with "color and tonal fidelity", this may be due to the printer, or the color profile, or a couple of other issues.
There has never been any claims that I am aware of (either here or at ElementsVillage.com) that edits are not properly saved to DNG. But the way to confirm that the edits have been properly saved it to close down PSE, and then re-open it and see if your edited photos show your edits. Similarly, your edits should also appear in other Adobe software (Lightroom, Photoshop). Under ACR preferences, there is an option to save your edits in a database or in .xmp file. Please make sure that .xmp file is selected.

Flash "cookies" are not saved

Hello,
I use Windows 7 SP1 + IE11 with flash version 14.0.0.176 (langage : French).
New installation.
The flash files/cookies are not saved. It is visible in flash games: save don't work.
I have found a test on this site: IE10 Test Drive Demo: Flash Cookies that shows on my PC that no flash cookie is saved at all.
I have searched several forum without finding any solution.
For exemple : I have verified in the flash control panel that web site are allowed to save file. I have verified that an "infinite" amount of storage is also allowed... I have seen similar topics unanswered in this forum. I have searched the SOL file, but they never appear.
But may be I have missed something. I would appreciate a solution!
May the fact that the C:\users directory is redirected (through a link) to another location do something?
Also, some flash applications don't work at all. Some videos embedded in information site for example don't start. Some games begin to launch but never start.
Thanks in advance!
Joe

I have now had a chance to try this and it doesn't work for me. Seems my Flash installation is really messed up.
I have edited the mms.cfg in C:\Windows\SysWOW64\Macromed\Flash. It now has:
SilentAutoUpdateEnable=0
AutoUpdateDisable=0
EnableInsecureJunctionBehavior=1
Enhanced Protect Mode in IE is not checked.
I have rebooted the computer.
And I still have the same problem creating the cookie. I get no error message but the cookie does not appear. Flash still seems happy to create directories for the websites I visit, but I get no cookie files in them.
Thanks for trying to fix this problem. Looks like it is time to try to unwind my junction point and move everything onto the C: drive. Perhaps I'll try uninstalling and reinstalling Flash one more time...
Mark

Clock and date settings are not saved

clock and date settings are not saved in lion

I'd give AppleCare a call.
AppleCare Support Phone Number: 1-800-275-2273
open 6am to 6pm Pacific Time
International Technical Support Numbers
http://www.apple.com/support/contact/phone_contacts.html
You may want to look under date & time and set the clock from the internet. At least you will have the correct time after a while.
RObert

FTP login and password are not saved on some sites

On some of my sites the FTP login and password are not saved
(even though the "saved" box is checked). Dreamweaver 8.0 on XP
SP2. I can export the site information and then import the same
file exported and there still will be no login or password placed
in the login or password window. I opened the exported .ste files
in notepad and found the login correct and the password incorrect.
I uninstalled Dreamveaver and reinstalled still same
problem.

Ok, I just spent about 3 hours on this. Here's the latest
that I've found. I had looked at the knowledgebase and my registry
matched what was suggested. As this has been an ongoing issue for
me, I thought it was still an issue. Apparently 8.02 did have some
improvements.
I can only guess that many of the 36 sites I have in the Site
Manager lost info before the .02 update.. or I hope so.
I did however discover that there is still what could be
considered a minor bug. I went in to Manage Sites and selected edit
for all of my sites, fixing the ones that had lost their user/pass
info. I'm not positive, but I think only the last edited site kept
it's data.
I discovered after many checks on all the sites, over and
over and over, that it appears that they are now holding the data,
but, if I add the user/pass, I must not only click the OK button to
close that particular site, but I must also click the 'Done' button
before only that one will be saved.
So, I thought I was fixing logins when in fact I was only
fixing one at a time.. Completely closing 'Manage Site' seemed to
hold one new set of login data each time. Seems that it shouldn't
be this way.
But I must say, I am rejoicing at the moment, as I actually
have all my sites set up with FTP info and I am now looking forward
to hopefully adding more and maybe they'll actually be available
for the next editing session.

HT4489 Ever since the last update IOS5.1.1, calendar entries are not saved on Icloud, and would not sync on all I clould devices

After the last update of IOS5.1.1, all caledar entries are not saved on Icloud and thus not synced on all my Icloud devices, even though, spreadsheets are synced, photostream is working and contacts is syncing, only calendar items. Anybody has the same problem? Or a solution to this kind or problem?

Welcome to the Apple Community.
First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

The titles are not saved when i quit

After quiting FCPX the titles i have made are not saved for next time i open a project.
Some titles are saved sometime?

Using FCP-X 10.01, OSX 10.7, 27" iMac 2010, 12 GB memory
I am having the same problem! I am using the Lower Thirds Gradient Edge title and I do change the font from Futura to Comic Sans and change the text size. The 58 large font I change to 55 and the 37 small font I cange to 45 (in case that makes a difference). I have used this for many titles in my project and some have the problem, others do not. It happens, as you say, when you exit the program and then re-launch.
Sometimes the titles go back to the template "Name", "Description", sometimes the title stays as written but the font goes back the generic Futura, and sometimes the font changes to a different one that is close on the font list to the "Comic Sans" that I am using! I did find that if I move the text boxes so that they have any overlap then the problem happens every time. However, I have been more careful with that recently and I am still getting the problem sometimes. Doesn't happen with every title which is what makes it more puzzling.
I have now taken to exporting a project file as soon as I have completed editing (I have 16 projects in the movie I am making) so that I don't lose what I have done!
Any ideas out there?

Edits are not saving in my contacts.

Similar Messages

Maybe you are looking for