Edits disappear in a Muliclip sequence

I'm editing a 2 camera multiclip sequence with a tight and wide shot. I have been doing this project for a few years and have never experienced this before. All my tight shot edits have disappeared and all I see is a continuous unedited wide shot on the sequence.
This issue only exists in clips which are sequenced together on the time line. The problem does not exist after the gap with any of the clips later in the time line.
I checked the auto save project and the clips in question were edited together in my last editing session but when I reopened the project recently all the tight shot edits were gone.
Does anybody body have any suggestions. I will re-edit, I'm only concerned that this might happen again.

Have you done anything to your system, prior to this behavior?...updates, upgrades, moved media...etc?
Sounds like pretty strange behavior...have you trashed prefs?, run disk Utility?...any other standard troubleshooting steps?
K

Similar Messages

Video tracks disappear when changing between sequences in premiere CS6

Dear people, can you please help me find out why video tracks disappear when changing between sequences in premiere CS6.
All it shows is the audio track and it is maximized to the first frame of the sequence. Video tracks are there but hidden - although video IS showing up in the program monitor.
When I pull the tracks down in the timeline window using the dividing line between the video and audio tracks and set the sequence work area back it works fine, however it is a great annoyance having to do this every time when i swap between sequences.
Can anybody please suggest a solution to this?
I'd appreciate any help.
MD

This is the audio tracks problem i cannot overcome:
https://forums.adobe.com/thread/1586025
(basically every type of audio i drop/place onto the timeline becomes left channel only, regardless of it being music or camera-recorded audio.
In the source monitor everything plays back just fine, but when placed to the timeline - it becomes LEFT only.
Weird.... (or am I and not it)

Why did edit disappear on latest update on my iPad mini ?

Why did edit disappear on my iPad mini after the later os update?

That depends on how it is configured in the app, PJL. You can set it up to include the trash icon and go directly to Trash. Both my gmail and icloud accounts are set up that way.

The green forward and back arrows under File and Edit disappeared after I downloaded the new Firefox Toolbar. How do get them back?

The green arrows for page forward or back at the top left under File and Edit disappeared after I downloaded the new Firefox toolbar (for 3.6) and were replaced by Most Visited, Getting Started and Latest headlines Icons, which I have little use for. How do I get the Original Toolbar back?

Is the Navigation Toolbar not being displayed? See below.
'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(~~red:Linux & OSX see~~: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M then release the key
''Windows'' Method 2. Tap the F10 key, while the Menu bar is visible, choose "View > Toolbars", click "Menu Bar" so that a check mark is placed next to Menu Bar
''Windows'' Method 3. Tap and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar so that a check mark is placed next to Menu Bar
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See:
http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
http://kb.mozillazine.org/Toolbar_customization#Restoring_missing_menu_or_other_toolbars
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''
'''[http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar How to customize the toolbar]'''

I'm using premiere pro CC 2014 for 4k editing. whenever I play the sequence cut off only window (premiere pro cc 2014).

I'm using premiere pro CC 2014 (trial version) for 4k editing.
but I saw the play sequence problem.
whenever I play the sequence cut off only window (premiere pro cc 2014).
but mac was fine.
I can't using realtime play.
my sequence setting information
sequence > sequence settings
editing mode : custom
timebase : 59.94 frames/second
video
frame size 3840*2160
pixel aspect ration : square pixels(1.0)
fields : no fields (progressive scan)
display format : 60fps
audio
sample rate : 48000 Hz
display format : audio sample
video previews
preview file format : quick time
codec : Gopro Cineform
Maxium bit depth : uncheck
Maxium render quality : uncheck
composite in linear color : check
check it please my workstation spec.
1. HP Workstation (Z840)
    * CPU : Intel Xeon E5-2690v3 2.6Ghz
    * RAM : 128GB
    * Graphic Card : Quadro K5200

Now I see is fully integrate with the OS preference. If you change the scale in windows resolution Preference, Premiere Pro scale too.
Thanks.

Incontext editing disappears after cntrl E and putting login in

unable to edit through incontext editing on a submitted website. It was accessible for about a week and now this week it doesn't. It asks for the adobe logon and the header and footer of the adobe incontext editing screen shows up and then it disappears and then switches back to original site, being unable to edit.
I am in desperate need for help. I have requested help 2 days ago through the help portion of incontext editing but have not heard anything back. Any ideas, any help at all? Thank you.

Hello ohwhyme,
Please post the URL for the site you're having problems with.
Also, what browser, version and OS are you using? Does editing work in a different browser?
Best regards,
Corey

Edit Audio in Audition - Have sequence update

I've edited a sequence in Premiere. There are several instances from one footage item on the timeline whose audio I wish to enhance in Audition.
So in the Project Panel, right-click Footage-1, Edit In Audition -> Clip. This extracts the file, work on the Footage-1-Extracted.wav, save in Audition, come back to Premiere.
So here's where I'm confused. Now I've got Footage-1 with it's unedited audio and Footage-1-Extracted.wav. Tell me if this is possible: I'd like Premiere to know that all the instances/references to Footage-1 in my sequence should use Footage-1-Extracted.wav.
Merging seems to create just another clip in the Project panel. Editing a sequence in Audition doesn't make sense to me cause I'm not done editing. Thanks!

The problem here is the work flow. Audition just isn't ready yet for the kind of integration we really need in order for it to be truly usable.
Right now, Audition is a destructive editor, which means all the work you do in Audition overwrites the original file. Because of this paradigm, Audition creates those extracted files. Most NLEs work non-destructively, however, only reading the original files, never overwriting them. What we need is for Audition to change its paradigm and becomes a non-destructive tool, using only metadata and either real-time processing or rendered previews for its work, always leaving the original file unaltered.
Put another way, what we need from Audition is the same kind of integration we now enjoy with SpeedGrade. We need Audition to read the Premiere Pro sequence exactly as it is, without the use of 'extracted' files, and whatever work we do in Audition needs to come back over to PP as effects applied to the original clips, not as new audio files. Further and unlike SpeedGrade, we need full editing ability at the clip and sequence level. We need the ability to move audio clips around, lengthen or shorten them, add new clips, add or delete new audio tracks, add or delete the standard PP transitions, etc. And all those changes need to be reflected in PP once we send the project back.
Only then will Audition be truly useful in the suite. Until then, I recommend skipping any Edit in Audition work. If you need to use Audition, do it separately from PP.

Custom step to Open edit expression when placed in sequence

In TestStand 3.5 is it possible to create a custom step type (from a copy of label step type) that automatically opens the "edit label step.." GUI when placed in a sequence?
Thanks,
Jason
Solved!
Go to Solution.

All -
Why not just capitalize upon the capabilities of the OnNewStep substep?
Create your new step type (a copy of your existing Label step). Notice that it already has as its substep an Edit step - this is what is invoked when you launch the Edit Label Step dialog.
Now, create a new Custom substep and name it (this is mandatory) OnNewStep. Specify its Module and mimic the Edit Substep exactly.
Now, whenever you create a new Step instance of this type, the OnNewStep substep will be invoked! And you don't even have to modify the CommonSubsteps.dll.
A cool trick - this is how we do things like programmatically create End steps for many Flow Control steps...
Message Edited by DRock on 02-24-2009 07:44 AM
Derrick S.
Product Manager
NI DIAdem
National Instruments
Attachments:
OnNewStep.png ‏28 KB

How to edit footage in the same sequence from two different cameras: 1) Standard Def 4:3 aspect ratio, and 2) Standard Def shot 16:9, anamorphic?

What can I say. We blew the shoot. His high-end Sony camera - std def at 4:3 aspect ratio.
My camera - the little Panasonic DVX100, set to anamorphic, so 16:9 aspect ratio.
I have to edit this footage together in the same sequence. Obviously, I'm getting prompts to change the sequence settings every time I try to move footage onto the timeline.
Alternatively, would someone just thunk me in the head.
I'm sad about this. I can't believe it happened.

What is the ouput - standard 4:3 DV?
If so, put a clip of the 4:3 material into a timeline and accept the offer to conform the timeline to that material. Then, any of the 16:9 material will be part of that settings - however - you will want to go into the DISTORT settings in the Viewer to alter the material so that the image extends beyond the sides (aka a center cut). It has been a long time since I've done this but I remember the number is something like 33 (or -33).
x

Editing audio from a FCP sequence

I have just finished editing a long sequence in FCP and now want to get rid of a background audio hum in the background of all the clips. What is the easiest way to export all my small audio clips into STP, remove the hum, then re-import into FCP.
I'm totally new to STP and finding the workflow very confusing.
Thanks!

RIght-click on the sequence in the assets window (default is Sequence 1, unless you changed the name) and click on send to>soundtrack Pro Multitrack Project

Issues creating multicam edit from pre-synced DSLR sequence

Hi All,
I'm new to Premiere Pro CC, having just moved from FCPX. I've been doing a fair bit of research on multicam editing in PP the last few days but have yet to be able to get it going on my project.
As you can see from the screen grab, I have a sequence of DSLR clips that I have synced onto my timeline. The issue is that no matter what method I use I can't seem to create a multicam edit that works. I always end up with only one camera in the multicam window and the audio isn't remotely synced up with it.
What am I doing wrong?

The sequence you have open. Take that sequence in your project bin, right click, pop-up menu, choose 'create a new sequence'. Open your new 'flat' one video track sequence in your timeline, click project monitor panel 'wrench', pop-up menu, choose ' Multi-camera'

InContext Editing disappearing

What could cause InContect editing to just shut down? I inserted it in many sites successfully. However, in this site I log in, and after a second or two InContext editing shuts down without error message. Most pages have a litte Flash file to play background music. I removed that on the "Venue" page to see if that is causing the trouble but it is not. Any ideas?
www.awbhst.orghttp://www.awbhst.org/index.php /index.php
Thanks,
Gudrun

I found the answer myself. I didn't know it was a Microsoft server which did not support php. Although the pages worked fine (I had only php extensions and no other code), InContext editing crashed. I changed the file extensions to htm and now it works.

WD MyBook World Edition disappeared from Finder

I have had a Western Digital My Book World Edtition network drive connected for several years that worked without issue. It recently disappeared from Finder and I cannot figure out how to restore access. I have seen numerous posts on this but no definitive corrective actions. I think it must be a simple fix. I do not use Time Machine.

verify on another Mac.
Dont buy WD consumer HD anymore, rather Hitachi or Toshiba.
Likely a dead SATA card, a very common issue, see here:
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD

Editing Custom XMP bag or sequence arrays in Bridge

I'm having trouble editing arrays in Bridge for my custom XMP panels. Is it possible to edit this data in Bridge? It will display but I can't edit the info.
Here is an example of my custom template:
cat_container_edit_text (fbname: '$$$/tom/Models=Models', xmp_ns_prefix: 'tom', xmp_namespace: 'http://ns.tom.com/tom/', xmp_path: 'Models', container_type: bag_struct, v_scroller: true, horizontal: align_fill, height: gTextViewHeight);
Thanks
-Tom
Bridge 1.0.3.106
Tiger 10.4.5

Thanks Gary,
It looks like the Mac .sit file still has the October 2003 version of the Custom Panel documentation.
Someone should fix that here. I'll see if I can find an link to email.
http://www.adobe.com/products/xmp/custompanel.html
Thanks
-Tom

Brushed edits disappear in Viewer from some images

I have some photos for which I can no longer access the post processing edit I made to them.
Specifically it seems to be the brushed edits that are lost. Crops, contrast, etc. are present, but nothing brushed.
If I've just quit Aperture and go back in I see brushed edits in these same phtos for maybe a second as I scan through the viewer, then they don't reappear agin unti I quit/restart Aperture.
If I export one of these photos, the resulting image does not contain the brushed edits either and does contain image level edits such as crop and horizontal adjust.
I suppose this is an issue worthy of Aperture Library repair since I have no idea how many or what photos are specifically having this problem. I just wanted to check in here first before taking the big step. Also I have backups in Time Machine and a Vault though I don't know how far back this goes.

When you get the blank screen, have you tried going to full screen mode or coming back to standard viewing mode if you already are in full screen?
Seems like you are having the 'black screen bug' commented in this forums many times.

Edits disappear in a Muliclip sequence

Similar Messages

Maybe you are looking for