Edits in "Notes" lost

Since upgrading my iPhone 5 to 8.1.1, I have twice had this problem:
I make some changes in a note, then accidentally press "insert photo". On "cancel" all of the edits I had just made are gone. I am unable to reproduce it, though...

It all boils down to how important is all that stuff to you. There is no guarantee that an OTA upgrade will succeed at first try, much less so than an iTunes-controlled upgrade with a local backup. Nobody can pat you in the back, look at you straight in the eye and tell you there will absolutely be no risk. Many people have successfully upgraded that way with no backup to protect them, a lesser number have not and have regretted it ever since.
Your call.

Similar Messages

Iphone4: after editing a note the note disappears. I have lost several over the past months.

after editing a note, the note disappears. I have lost several over the past few months.

Really? The AASP I went to services both Macs and iPhones (and was actually within that list,) and I was very surprised earlier that they refused to help me with repairing my iPhone 5, even if I voluntarily and expressly said that I am willing to pay for the cost. The service provider said he can't help me with anything and advised that I have it shipped to Singapore (and since that is very difficult for me now, I came here instead to ask for advice).
I will try another AASP very soon and shall update you. Thanks for your help, Clinton!

HT4759 Hi I am trying to access my iphone notes from my desktop and they are not transfered? how do i transfer them? It is working the other way around - until I edit a note on my phone and then it is lost on my desktop? Help!

Hi I am trying to access my iphone notes from my desktop and they are not transfered? how do i transfer them? It is working the other way around - until I edit a note on my phone and then it is lost on my desktop? Help!

http://support.apple.com/kb/HT1296

Camera Raw editing is not enabled - ACR5.4 Vista 64bit

When I use Bridge, and right click and select to open a raw file in Camera Raw, I get this message:
"Camera Raw editing is not enabled. Camera Raw editing requires that a qualifying product has been launched at least once to enable this feature".
There is no problem in Bridge when opening a raw file in Camera Raw when just Open With (PS) or double-clicking
I have seen many have the same problem, and I have tried most of the hints found in forums, but no luck.
I running Windows Vista 64bit. Installed and activated Photoshop CS4 in the standard directories and installed ACR 5.4 manually as described by Adobe by copy the plugin files to folders:
Program Files (x86)\Common Files\Adobe\Plug-Ins\CS4\File Formats\
Program Files\Common Files\Adobe\Plug-Ins\CS4\File Formats\
There are no other files in this 2 directories.
I have tried purging cache, and have closed both Brigde and Photoshop and startet Bridge from Photoshop by using -file, -browse in Bridge. And still the same problem.
There are no errors in the files alm.log and amt.log in %temp% directory.
Thanks for any help

I have just upgraded to Win 7 64bit and have had a similar problem with getting "Camera Raw editing is not enabled" in Bridge
I had installed CS4 as a trial whilst I tested that my install of Win 7 was OK
When I activated CS4 I was using CS4 64 bit and never got the "I have deactivated the software from another machine" question
I tried lost of things to get Camera Raw editing in Bridge and all failed.
When I tried CS4 32 bit it wanted to activate the software - it asked the "I have deactivated the software from another machine" question and then rejected the activation as two PC were using the key.
I deactivated CS4 from the 64bit side and removed the key
Then I activated using CS4 32bit - all seems OK now
Hope this works for you

Edits will not be saved. Any Edits made to the enterprise global template items are only available during this session.

Hi,
I am getting a pop-up message(Edits will not be saved. Any Edits made to the enterprise global template items are only available during this session.Make edits in checked-out enterprise global template to make them
available for all users of this project server) when trying to insert a new column in the Gannt Chart View.
Due to this what all are the columns that inserted in the project plan, will be lost when open the project in the next time.
I have opened the Enterprise Global Template and cross checked for Gaant Chart view it is showing the table as "Entry" only.
The requirement is what all columns are required for the project plan, manager will insert in the project first time. Next time on-wards it needs to be display the columns when opened the project from server by default.
We are unable to reproduce this issue in our Dev Envt.
Could anyone of you please help me.
Thanks in Advance!
Regards,
Venkat

Hi Venkat,
I suggest to remove Gantt Chart view and Entry table from Eglobal. These are default views from client and it is highly recommended to not use them in Enterprise Global.
Whatever a user ist doing on a view or table which is included in Enterprise Global will be reset on next open - therefore you receive this message.
If you need some server wide defined views and tables, create them. But remove Gantt Chart and Entry.
Does that help?
Regards
Barbara
To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
an appropriate solution faster. Thanks for your support!

The item you are trying to edit has not yet been processed by iTunes Match

"The item you are trying to edit has not yet been processed by iTunes Match and any changes you make could be lost. Are you sure you wish to continue to edit information?"
How long is this supposed to take? I have some tracks that haven't been "processed" for days now.

I had this same problem. It was driving me crazy and I finally figured it out. On my main computer, I keep an actual file for of all my music. None of it lives solely in the cloud. However, on all my other iTunes Match devices, I stream all my music from the cloud (which includes songs I've purchased from iTunes as well as ones I've imported myself). One song in particular was stuck in limbo with the exact message you wrote. This particular song is not available in the iTunes Music Store. I didn't want to delete the file and reimport it because I like keeping all my play count and date added info. My other devices linked to my iTunes Match account knew that the song existed, but it could never actually play this particular song. I'd always get an error message.
Here's the solution: On another computer that's linked to your iTunes Match, delete the song. It will only ask you if you want to delete it from iCloud as the song file doesn't actually live on that computer. If you say yes, on the original computer where the song file lives, you'll now see the song file has a cloud icon with the X in it. From there, you can control-click on the song file and select, Add to iCloud. Then, it will add it to iCloud and will no longer be stuck "processing."

How can I show only text edits and not text formatting when using print comments summary?

Acrobat 9.3.0 for Mac.
Here is the scenario: I used the Compare command to see the changes between 2 PDFs. The resulting file some edits are inserts and some are deletions. I want to print a comments summary only showing the text edits. In the Compare Option pane, I select Text and deselect Images, Annotations, Formatting, Headers/Footers, and Backgrounds. Now on the screen I see inserts are highlighted in blue and deletions are marked with sort of a caret and vertical bar symbol. So all looks good at this point. However, when I show the Comments List, I see addtional comments that indicate "Replace - The following text attributes were changed: fill color." Those comments do not appear in the page view unless I check the Formatting check box to show them. With Formatting unchecked, I print a comments summary and all of the "Replace - Fill Color" comments" appear on the resulting comments summary.
I only want to show text edits, not text formatting changes. So questions are:
1. Why, when the Formatting checkbox is unchecked, do the text formatting comments still appear in the comments list when they do not appear on the page display.
2. How can I print only the text content edits and not show the text formatting changes when using Print Comments Summary.

Hi,
You can set ExecuteWithParams as default activity in the task flow then method activity to return total no of rows passing to Router activity if your method has value 0 then call Create insert operation else do directly to page.
Following idea could be your task flow
Execute With param (default) > SetCurrentRowWithKey > GetTotalNoOfRows (VOImpl Method)
|
v
Router
1. If pageFlowScope outcome is 0 then call CreateInsert > MyPage
2. if pageFlowScope outcome > 0 then MyPage
hope it helps,
Zeeshan

Using 12.0.1.26 Im trying to move photo's from an app on the pad to laptop but the select all in Edit is not hilighted, how to you select all?

the select all under edit is not highlighted in 12.0.1.26, I need to move a large number of photos from pad app sharing area to laptop, how do I select all? Thanks

the select all under edit is not highlighted in 12.0.1.26, I need to move a large number of photos from pad app sharing area to laptop, how do I select all? Thanks

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

Mac desktop. 10.6.8. Text edit. Not locked. Read and write. Still, documents are locking when they are moved from desktop to another folder on the server. Techies can't figure it out here. What am I not doing?

Mac desktop. 10.6.8. Text edit. Not locked. Read and write, not read only. Documents are locking when they are moved from desktop to another folder or saved directly into that folder on the server. Not happening with anyone else but me and the boss's computer so has to be in the properties for my text edit software. Techies can't figure it out after trying for two weeks. Boss can do a cut and paste and put into a new document, but that's starting to become a problem.

Mac desktop. 10.6.8. Text edit. Not locked. Read and write, not read only. Documents are locking when they are moved from desktop to another folder or saved directly into that folder on the server. Not happening with anyone else but me and the boss's computer so has to be in the properties for my text edit software. Techies can't figure it out after trying for two weeks. Boss can do a cut and paste and put into a new document, but that's starting to become a problem.

View in edit window not getting updatet properly

Hello
I have some problems with the view in the edit window not getting updatet correctly. I noticed this in spectral view. For example, when I zoom in very much, so I only see about 3 seconds of audio and then select one second of audio and do a time stretch, so it will be two seconds of length, the windows does not update properly.
Normally the audio behind the strechted selection should move backwards, but often the strechted portion just sort of overlaps it and it doesn't move. When I zoom out and then back in, it seems to be ok.
I also have had very weird behavior when trying to remove clicks, with the view also getting pretty messed up.
Does anyone have similar problems with the view not getting updated properly?
I am running german windows xp, audition is installed in english. I first thought that installing it in english instead of german solves the problems, but unfortunately it didn't.
Greetings

Hello again
I made a movie of this behavior:
https://share.ols.inode.at/4NNYXR4HT2CJI5IHY273R9NRHRW9OLGR95Q7VTOP
It shouldn't look like that, right?
Greetings

How can I publish a project so that the link to embedded flv is not lost?

When publishing an Adobe Captivate 3 project, the embedded flv file does not play.
How can I publish a project so that the link to embedded flv is not lost?

I am not really sure, if I understand you right. But try this:
Don’t place a picture, but draw a box and use the "Fill" command to put a picture into it.
(Don’t click onto the color swatch, but onto the blue link "Fill".)
In this case responsivness should work.

Enhancement pt /badi/exit to restrict Creation/edition of Note txt (STXH)

Hi All,
I am trying to restrict creation/edition of Note(text) in PA30 for qualification(infotype 024) . The BADI(HRBAS00INFTY) which triggers when the qualification is changed , is NOT having any data in old_image and New_image when Notes are changed .
Any info on how to restrict enhancement point /badi/exit for this will be very helpful .
Thank you in advance 
Brajesh .

No user exits or badis are available to control the transactions or master data long texts. It is only available for SO10 texts (Standard Text). I have read this somewhere in the SAP Notes.

SQL Server 2012 Developer Edition will not install. Setup files don't even get copied completely. Win 8.1. ACT instance is loaded & can't be deleted. From log file: Error: Action "PreMsiTimingConfigAction" failed during execution.

SQL Server 2012 Developer Edition will not install. Setup files don't even get copied completely. Win 8.1. ACT instance is loaded & can't be deleted. From log file: Error: Action "PreMsiTimingConfigAction" failed during execution.

Hello,
I am glad it worked.
Thank you for visiting MSDN forums!
Regards,
Alberto Morillo
SQLCoffee.com

I had to erase my hard drive and then reinstall everything back from my passport external hard drive. Now my iPhoto edit is not working. I get a blank screen when I want to edit. The photos show up in the library but I cannot edit them. Help?

I had to erase my hard drive and then reinstall everything back from my passport external hard drive. Now my iPhoto edit is not working. I get a blank screen when I want to edit. The photos show up in the library but I cannot edit them. Help?

There are several possible causes for the Black Screen issue
*1. Permissions in the Library* : Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
*2. Minor Database corruption*: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
*3. A Damaged Photo*: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
*4. A corrupted iPhoto Cache*: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
*5. A corrupted preference file*: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Regards
TD

Edits in "Notes" lost

Similar Messages

Maybe you are looking for