Editted in Camera Raw Indicator missing with Adobe Bridge CS6, Mountain Lion

Hi there,
I have always been using bridge for many years to edit my photo in RAW. last week I just moved to Mac from PC.
Usually, when I am using PC, after I editted my RAW file using Camera RAW 6.5, usually on the right corner of the thumbnail,it would show indicator showing that the RAW file has been editted.
But the indicator didn't how under Mac OS. Is there any option to turn that back on? The indicator really helps differentiate between RAW files and JPEG files
Thank you in advance,
Best Regards,
Jeffri

Herewith I accompanied an image for better illustration:

Similar Messages

  • I have problem with adobe bridge cs6. Every time I open it Bridge tells me to Purge Cache. I have CS

    I have problem with adobe bridge cs6. Every time I open it Bridge tells me to Purge Cache. I have CS6 on two computers and it works fine on one of them. I have tried to reinstall it without succeeding to fix the problem. Does anyone have the same problem and a solution to it?
    "Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation."

    You must have a Mac.  Try this.
    Quit Bridge, from user library (NOT system and root library) preferences folder find and delete the com.adobe.bridge5.plist file manual. Do this also in same user library caches folder (Caches/Adobe/Bridge CS6) and inhere find and the folder called 'cache' and drag it to the trash.
    restart Bridge holding down option key and choose reset preferences, then try again.

  • Camera raw changes color in adobe bridge and photoshop

    Hi all, I am quite new to use RAW. I have raw files that I want to edit. Unfortunately, the moment I click on the raw files, the color changes.
    Is there anything I should do to the color setting?
    I am using a canon 20d and Adobe Photoshop, Bridge CS 3 and Adobe Camere Raw 4.0

    The image is indeed rife with red color.
    The fact that the embedded JPEG isn't quite as oversaturated with red as Adobe's conversion with the lowest color temperature of 2000 just says that Canon's conversions have more range at the low-end of the color temperature setting.
    This is the color from the embedded JPEG.  Clearly it's dominated by a reddish-orange color, though not as red as that from Adobe's software.
    This is the color from Adobe Camera Raw's conversion at the (low-end minimum) color temperature of 2000:
    This is the photo converted with Canon DPP using "click white balance" on the bridge beam on the left:
    Note, however, that (though the dropper seems to have incredible range) DPP does not allow you to specifically SET a color temperature lower than 2500K, which yields this color:
    The bottom line here is that the "Click White Balance" function in Canon's DPP has far more range than ACR, where even the white balance dropper "mins out" at 2000K.
    That's something the Adobe folks may want to look into, to extend the range of ACR's capabilities to suit this kind of IR photography.
    -Noel

  • Adobe camera raw will not respond in bridge cs6?

    adobe camera raw does not respond in adobe bridge? I am trying to open Jpegs, which i have previously been able to do so by right clicking and opening in adobe camera raw. Now it is unresponsive.

    dj1461986
    You are definitely in the wrong forum for Bridge CS6 and Adobe Camera Raw. You have posted in the Adobe Premiere Elements Forum (video editing focus).
    You probably want to be posting in the Photoshop Forum.
    http://forums.adobe.com/community/photoshop
    My preliminary findings suggest possible workaround
    a. Open camera raw in Photoshop 5 or 5.5 and then open edited raw image in Bridge CS6
    or
    b. There is a preferences route to check out.
    Not being a Photoshop user, this is a quick suggestion where you might start looking. This is apparently a known issue.
    The Photoshop users should be able to give you all the details and options you have for workarounds for now.
    ATR
    Add On...Please repost in Photoshop Forum or wait for a moderator here to see your thread here and move it from here to there.

  • Generic camera thumbnails still appear after you install Camera Raw 3.x update (Adobe Bridge 1.x)

    Before posting a new topic about this, check the following link to see if it resolves your issue.
    http://www.adobe.com/support/techdocs/331596.html
    Thanks
    Shane
    Adobe Tech Support

    > im positive the plug in is in the right place
    Hmmmm. Does the path to that place begin at the root level, i. e. with the NameOfYourHardDisk?
    If it begins with "YourUsername", it's in the wrong folder.
    CORRECT:
    NameOfYourHardDrive//Library/Application Support/Adobe/Plug-ins/CS2/File Formats/
    From the "Debugging" thread in the ACR forum:
    The new location for Adobe Camera Raw 3.x is:
    Mac: /Library/Application Support/Adobe/Plug-ins/CS2/File Formats/
    Note: that the Library folder referred to above is that found at root level and NOT the User/Library folder.
    Adobe Camera Raw Forum [CLICK HERE]

  • When I try to open up camera raw it shuts down Adobe Bridge, can anyone help?

    I am using mac. My problem at first was that when I tried to open a RAW image it would just shut down either photoshop cs4 or bridge cs4. Then I installed that Camera Raw 5.2 update, now I can open a raw image if I double click it from my desktop. But once I am in bridge and try to open a raw image, it loads for a few seconds and shuts down bridge. Is there a way to fix this?
    Even when I when I try to change the camera raw preferences in bridge (File > camera raw preferences) that also shuts down bridge.

    Go to photoshop, and check , in the Photoshop menu>about plug-ins
    What version of camera raw do you see?
    There should only be one camera raw plug-in installed at the default location (check the read-me or the FAQ of this forum)

  • Lost camera raw support for canon 1ds markI in mountain lion

    I seem to have lost system support for camera raw files for the original Canon 1ds (what you might call the markI). There's been two recent raw support updates, and I'm not sure if it occured with the first for those two updates or with update to Mountain Lion itself (which I recently clean-installed). I noticed it after the first raw support update (Digital Camera RAW Compatibility Update 4.01) but it could have happend with Mountain Lion install and I just didn't notice. In any case, I definitely don't have support for the camera raw files, finder shows only the generic TIFF icon thumnail (the raw files from the markI 1ds were of the extension .TIF, before canon moved on to .cr2 format..). Preview and Aperture can preview the file but without any custom white balance or other info stored with the raw file from camera.
    Anybody else experience this or know fix?
    Thanks!
    For anyone wanting and willing to test on their machine, I'll post a link to a test raw file.... hmm, apparently this support forum does not allow for the linclusion of a link to an image file, but I'll see if it allows for a link to a zipped folder with image inside... I suppose I wouldn't download a .zip file myself but for anyone braver than I:
    http://laglj.com/2012hirez/1dsTestFile.zip
    Thanks,
    Lane
    laglj.com

    Lane,
    That latest raw update also shows supported devices. The EOS-1Ds is still shown as supported by Mountain Lion in the knowledge base article that accompanies it. Bump!
    I wonder if using Disk Utility and verify/fix permissions may restore your RAW capability.
    Don't have Aperture or Lightroom.
    I installed the recent raw updates into 10.8.2. The DB5W2360.TIF file has a generic Preview icon. Graphic Converter 8.3.1 opens .cr2 files, and it opened this TIF file nicely as well. GC is willing to modify white balance with a condition that it cannot be done in place, and must be exported to a different format.
    Not much help, I know.

  • Grainy camera image on FaceTime with MacBook air after mountain lion upgrade

    Extremely grainy image from built in MacBook air camera on Face time and Pgot booth after upgrade to Mountain Lion. Any one else?? 

    When you do  > Software update...  ,  does it say you need them?  If it doesn't, you don't.  Some updates were firmware that applied regardless of OS.  Others like the firmware that enabled Power Nap appear after ML upgrade.  In either case I'd believe what Software update says and not try to download updates from the website except to address specific issues.

  • Nikon Coolpix P340 Camera RAW plug in for Adobe Bridge?

    Just got a P340 specifically for the ability to capture RAW images and realized that the camera isn't supported yet. Anyone know when the plug in for the P340 will be available?

    Thanks for trying to help, Curt Y.  I did download the beta ACR 8.4.0.182 and have CC.  I checked that it was installed.  I redownloaded the images from the camera.  After I did that, the NEF files in RAW showed up in Bridge but no thumbnails.  When I tried to open them I got the same error message that these can't be opened.  I researched the beta ACR 8.4 newly suported cameras and the Coolpix P340 was not listed.
    I tried taking the memmory card out of the P340 and put it into my Nikon D7000 to see if I could download the files in RAW as the D7000 is supported, but for some reason the files did not even appear on the D7000.  I guess P340 files won't be able to be viewed or otherwise utilized in a D7000 camera.
    Unless you have any other suggestions, I guess I need to wait until Adobe adds the P340 to the list of supported cameras.
    Best/Saul

  • Anyone having printer problems with adobe cs5 and mountain lion

    I can print one copy in adobe cs5 but if I hit the print button it shuts down the program.  Anyone having this problem besides me?

    Are the drivers for your printer are up to date? You probably can print one copy cause it doesn't access the option window in your application.

  • Help with Adobe Bridge CS6

    Before my Mac was updated my Bridge was working fine.  Now it won't open all the pictures I select for editing.  What can I do to fix the problem?

    What error messages do you see.  What extension are the pictures that do not open? 
    Check the file name closely.  Turn on option to see extension so you don't have something like bird.jpg.jpg

  • Camera Raw Preferences not working in Bridge CS6

    When I try to choose this nothing happens - I don't get the preference panel or any kind of error.  It is as if I did nothing.

    Without system info and otehr details nobody can say anything.
    Mylenium

  • Adobe Bridge CS6, Camera Raw

    Hello,
    I need urgently help.
    I'm working on a MacBook Pro with Adobe Bridge CS6 since more than 1 year, using Camera Raw, v 8.6.0.254 without any problems.
    Last month I bought a Mac Book Air and installed Photoshop Elements 12, Adobe Bridge CS6 and Photoshop CS6. But I'm still missing the possibility to open my pictures in Camera Raw.
    After downloading the actual version 7.01 of Camera Raw from the website of Adobe.com and trying to install it I got the following error report:
    UPDATE FEHLGESCHLAGEN;
    Updates konnten nicht installiert werden. Dieser Path ist für Sie nicht geeignet.
    Name of the downloaded program is: AdobeCameraRaw-7.1-mul-AdobeUpdate.
    What shall I do to get Camera Raw running?
    Thanks so much for your help
    dieter

    What camera  and version of ACR?

  • Camera Raw won't open in Photoshop CS6

    Wanting to begin using the Camera Raw plug-in for PS CS6, I find that it isn't active. (1) In Bridge CS6, the ACR icon in the top menu is grayed out; (2) after clicking a JPEG image file in Bridge, then right-clicking it, there's no option to open it in Camera Raw; (3) using Bridge's File menu, there's no Camera Raw option visible; and (4) in PS CS6, going from File > Open, then choosing "Camera Raw" in the Enable options drop-down list, each JPEG file is grayed out.
    My attempts to activate Camera Raw involve (1) downloading DNG Converter 8.7.1 and (2) attempting to download ACR 8.3…Adobe Update. That second effort failed, getting this error code: "Camera Raw 8.3(CS6) U44M2P7". I currently have AdobeCameraRaw7.0ALL and AdobeCameraRawProfile7.0ALL installed on a Mac running OS10.7.6.
    I don't know what else to do. Please tell me how to activate Camera Raw using Photoshop CS6.
    Thank you very much.

    Benjamin, I thank you very much for your prompt and helpful e-reply!
    I've downloaded and installed the ACR plug-in for v. 8.7.1.311 Now, files open in Camera Raw, as expected, when using Bridge CS6. That's great.
    I have two questions, Ben:
    1 -- -- Although the first three options that I mentioned above (working from Bridge) are successful, I'm unable to open JPEGs in Camera Raw directly from Photoshop [as in option (4) above]. I'd like to be able to open JPEG files from PS; is there a preference I need to set to get PS to recognize and enable ACR?
    2 -- -- Should I now delete all files related to AdobeCameraRaw7.0ALL? Or are those files required to run with the new plug-in?
    Thank you, my friend.
    Warren

  • Adobe Bridge CS6 has stopped working - has issue been resolved?

    Hello.
    I am experiencing the above problem with a new install of CS6.
    Has this issue been resolved?
    CS6 Design and Web Premium installed on Win 7 pro 64 bit Dell Precision laptop. Error with Adobe Bridge cs6: "Adobe Bridge CS6 has stopped working", problem event name "APPCRASH". Error occurs when opening Bridge from Photoshop and other apps (Browse in Bridge) and directly from desktop or start menu. Also a cache directory is not being created under c:\user\<user>\appdata\roaming\adobe\bridge\. Holding ctrl key down and double clicking icon gets same message, cannot get at reset window.
    Performed the following with no change: verified Bridge and full suite is on latest version (Bridge=5.0.2.4); created desktop icon directly from bridge.exe; verified application was installed and is starting with administrator privileges; verified latest display driver installed; performed complete uninstall of CS6, CC cleaner tool run, then full reinstall; Error under Event Viewer: faulting application: Bridge.exe and faulting module name: ntdll.dll; disabled UAC; tested memory for damage using MemTest86-good.
    Thanks for any help you can provide.

    A follow up to the above.
    There appears to be a number of possible causes for this type of error. In my case it was somewhat specific. I had a stand alone copy on this same machine previously of Adobe Photoshop CS2 (only) which was completely uninstalled prior to the installation of CS6. There is an issue with Bridge CS6 being installed on a machine that has Bridge CS2 on it. I wasn't aware of Bridge being present with my copy of Photoshop CS2 but apparently there were at least some components of Bridge CS2 left after the uninstall. The workaround that solved the issue for me was the creation of an empty folder:
    C:\Users\[your user name]\AppData\Roaming\Adobe\Bridge CS2
    For those of you who may have this situation.
    Here is where I found the solution (sixth thread down):
    Bridge CS6 won't open running on Win7

Maybe you are looking for