EDL Export help required

Hi all
Finished the edit of a feature shot on 35mm 4p. All telecine files were conformed to 24 fps and then batch list imported into FCP. So far so good. The edit is now done and we are just about to go for the DI only the film list exported from FCP is completely wrong. Tell a lie, the pull list inside it is OK but the cut list is completely screwed. Any ideas, please?
Nothing wrong with the flex files and in main view the film standard for every clip is 35mm 4p
Thanks in advance

>>yes i wana to import it on the same server, this dump was taken 2 days back and nowa i wana to import it.
If assumed that import will be on the same database and on the same server,
1) Drop the user first (For safe side, take the export of this user before droping).
2) create the user again and assing the same tablespace as default tablespace how it was earlier, and grant the privileges.
3) use the import command.
imp fesco/password@fesco fromuser=fesco touser=fesco file=fesco_fullbkp.dmp log=fesco_fullbkp_imp.log
Regards,
Sabdar Syed

Similar Messages

Urgent help required: Query regarding LC Variables

Hi All
Sometime earlier I was working on a performance issue raised by a customer. It was shell script that was taking almost 8-9 hrs to complete. During my research I came across a fact that there were some variables which were not set, the LC variables were impacting the sort funnel operations because of which the script was taking a long time to execute.
I asked them to export the following commands, after which the program went on smoothly and finished in a couple of mins:
export LC_COLLATE=en_US.ISO8859-1
export LC_MESSAGES=C
export LC_MONETARY=en_US.ISO8859-1
export LC_MONETARY=en_US.ISO8859-1
export HZ=100
export LC_CTYPE=en_US.ISO8859-1
export LANG=en_US.UTF-8
Later I did recover that setting the LC_COLLATE to C, is not helping and the program was again taking a lot of time. Few questions that I want to ask are:
1. Can someone please tell me, what each of these variable mean and how these values make a difference.
2. When I exported LC_COLLATE=en_US.ISO8859-1, it worked fine, but when i tried with the defalut value LC_COLLATE=C, then why the program didnt work.
As this issue is still going on, hence I would request All to provide their valuable inputs and let me know as much as possible.
Appreciate your help in this regard.
Thanks
Amit
Hi All
A new development in this regard. The customer has send us a screen shot in which they were trying to export the locale variable using the commands which I have pasted above. I can see in the screen shot that while exporting LC_COLLATE and LC_TYPE, they get a message that ""ksh: export: couldn't set locale correctly"".
Request everyone to please give their inputs as it's a bit urgent.
Thanks for all the help in advance.
Thanks
Amit
Some help required please...
Edited by: amitsinhaengg on Jul 22, 2009 2:03 AM
Edited by: amitsinhaengg on Jul 22, 2009 2:06 AM

LC_CTYPE
Controls the behavior of character handling functions.
LC_TIME
Specifies date and time formats, including month names, days of the week, and common full and abbreviated representations.
LC_MONETARY
Specifies monetary formats, including the currency symbol for the locale, thousands separator, sign position, the number of fractional digits, and so forth.
LC_NUMERIC
Specifies the decimal delimiter (or radix character), the thousands separator, and the grouping.
LC_COLLATE
Specifies a collation order and regular expression definition for the locale.
LC_MESSAGES
Specifies the language in which the localized messages are written, and affirmative and negative responses of the locale (yes and no strings and expressions).
You can use command
# locale -k LC_CTYPE
to see more detail about each type.

MAJOR EDL Export BUG in 8.2!

I just upgraded to version 8.2 and now there is a major bug when exporting EDLs with audio clips!   EDLs (cmx3600 format) should only export Timecode In/Out for Source & Record.   The latest 8.2 version is now incorrectly outputting SAMPLE FORMAT for EDLS for any audio clips! This is a major bug and potentially show-stopping.
What 8.2 is exporting:
What it used to (and should continue to) export before 8.2:

with my PP 8.2.0 (65) Build, I get the same error with edl WAV audio clips until I 'link' video clip with audio clip below on the timeline
I believe after linking the video clip to the audio clip (below on the timeline), then exporting the edl, the timecode format displays properly
However, my edl export ability still needs work, because I would think my video timecode needs to match my audio timecode (for linked clips) so I am still working on importing the edl into Speedgrade and 'hearing' the audio
I was getting the same error audio text file as AjentJJ30, until I 'linked' video with audio,
so far my edl text file appears as below
TITLE: edl with wav link
FCM: DROP FRAME
001 AX       V     C        00:00:00:00 00:00:24:23 00:00:00:00 00:00:24:23
* FROM CLIP NAME: bmpcc_1_2015-02-05_0951_C0005_[000000-002420].mxf
002 AX       AA    C        01:03:06:05 01:03:30:28 00:00:00:00 00:00:24:23
* FROM CLIP NAME: full shoot
003 AX       V     C        00:00:24:23 00:00:41:22 00:00:24:23 00:00:41:22
* FROM CLIP NAME: bmpcc_1_2015-02-05_0955_C0001_[000000-004258].mxf
004 AX       AA    C        01:06:32:22 01:06:49:21 00:00:24:23 00:00:41:22
* FROM CLIP NAME: full shoot
005 AX       V     C        00:00:41:22 00:01:00:10 00:00:41:22 00:01:00:12
* FROM CLIP NAME: bmpcc_1_2015-02-05_0958_C0003_[000000-004444].mxf
006 AX       AA    C        01:09:17:29 01:09:36:17 00:00:41:22 00:01:00:12
* FROM CLIP NAME: full shoot
EDIT: as you can see my WAV file does not show the proper clip name, as well as not displaying the .wav file extension.
I chase after the edl displaying proper WAV data, but could not achieve any solid results. My dng video clips from the bmpcc have wav files, normally they do not import into Speedgrade with the dng sequence, so using the video clips to test the edl process isn't very helpful.
I can not get results to support having the WAV edl data working when importing into SpeedGrade.
Sorry to think otherwise.

Help require with installing Adobe Acrobat onto my Macbook Pro Retina.

Help require with installing Adobe Acrobat onto my Macbook Pro Retina.
I have successfully installed all of my creative cloud apps with the exception being acrobat.
I cannot print from Indesign to PDF.
I have unistalled, reinstalled and still no Adobe Acrobat.
I now have to go back to Windows 8 and create the PDF's there.
Any one know how to get around this issue?
Thanks in advance
Kelvin

OSX has effectively killed the ability to print to pdf, (print to pdf eliminates most of the "Rich features" of current pdf).
Export from InDesign, always, excpet for the 1% of the time where you know why print to pdf would produce a better result.

XSLT mapping Help Required.

XSLT mapping Help Required.
Hi Experts,
I am New to XSLT Mapping. I am practising the below Example:
InputXML File:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
XSL StyleSheet File:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/Gen"
Xmlns:ns1=”http://XYZ.com/Test”>
<xsl:template match="/">
<ns1:MT_XSLT_Target>
<Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
<Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
</Name>
<Street> <xsl:value-of select="concat(concat(ns0:Mt_XSLT_Source/Person/Address/Houseno,' '),
ns0:Mt_XSLT_Source/Person/Address/Street)"/> </Street>
<City> <xsl:value-of select="ns0:Mt_XSLT_Source/Person/Address/City"/> </City>
</ns1:MT_XSLT_Target>
</xsl:template>
</xsl:stylesheet>
The Desired Output shuold be:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_XSLT_Target xmlns:ns1="http://XYZ.com/Test">
<Title>Male</Title>
<Name>Anshul Chowdhary</Name>
<Street>83/b 2nd Main</Street>
<City>Mysore</City>
</ns1:MT_XSLT_Target>
I have refered the xsl in xml and i am getting the below Oupt in a Single line like this:
Anshul Chowdhary Male 2nd Main 83/b Mysore
I am Unable to display in Target XML Fomrat as shown above. Please check and do the needful.
Regards,
GIRIDHAR

Hi,
I have used below for testing.
Input xml:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
xsl code:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/gen"
    xmlns:ns1="http://XYZ.com/Test">
    <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
    <xsl:template match="/">
        <ns1:MT_XSLT_Target>
            <Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
            <Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
            </Name>
            <Street> <xsl:value-of select="concat(concat(/ns0:MT_XSLT_Source/Person/Address/Houseno,' '),
                /ns0:MT_XSLT_Source/Person/Address/Street)"/> </Street>
            <City> <xsl:value-of select="/ns0:MT_XSLT_Source/Person/Address/City"/> </City>
        </ns1:MT_XSLT_Target>
    </xsl:template>
</xsl:stylesheet>
For testing in PI ,change the extension from .txt to .xsl and zip it and upload into PI as an imported archive .
Regards
Venkat

Help required - Sales order item is partially delivered but the item grayed

I have a sales order 123 having say item10 with qty 1, item20 with qty 10 , item 30 qty 12
Item 1 confirmed qty 1 and delivered qty is 1
Item 2 confirmed qty 10 and delivered qty 10
Item 3 confirmed qty 1 and delivered qty is 1
Now the item3 still has open requirements of 11 to be delivered. But the item is GRAYED OUT already.
even if I do ATP the qty is not confirming for the remaining 11 pieces.
Why is that? How to make that item out from GRAY.
How to confirm the remaining 11 qty for that item.
Help required as early as possible.
Appreciate ur help guys
Radha

hi Radha, how are you ?
     ---the partial deliveries in master data must have not been mentioned.
     ---the deliveries should be upto target quantity.
     ---check order type, item category and schedule line category.
     ---check unrestricted stock availability.
thank you
regards
Khera.

Search Help with in a serach help required in SRM 4.0

Hi,
Requirement: Search help required for Product Category field in the Search help for Product(BBPH_PRODUCT) in SRM portal.
This search help is used in Create shopping Cart transaction. The hyper link on Internal Goods/Services leads to the search help BBPH_PRODUCT.
My analysis:
The field Product Category (CATEGORY_ID) has search help(COM_CAT_HIER) attached to its data element. When I single test the search help BBPH_PRODUCT in SAP GUI,I can see the search help for field product category in the selection dialogue box. However the same does not appear on the corresponding screen in HTML.
Please let me know whether I need to do some thing to make the search help appear on the HTML screen?
With Regards,
Prakash Kamath

Hi Prakash,
I have the same problem but with another field. Unloading point. Could you please tell me how did you solve this problem with displaying F4 help on html/ SRM portal?
Thank you very much.
Best regards,
Danijela ZIvanovic

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying "attempt to access invalid address" then "application not respo

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying “attempt to access invalid address” then “application not responding” Suggestions how to access would be much appreciated. Tks. Stuart

What is the size of your hard disk? PSE 4 is a very old program and I suspect it is not able to access the entire hard disk on your machine. Just a thought here.

Help required in Weblogic 6 - Creation & Configuration of Web Application

Forum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
Moin

Forum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
Moin

Help required network configuration - Gateway route settings get erased on reboot.

Oracle Linux 7
Linux myhostname 3.8.13-35.3.1.el7uek.x86_64 #2 SMP Wed Jun 25 15:27:43 PDT 2014 x86_64 x86_64 x86_64 GNU/Linux
#cat /etc/sysconfig/network-scripts/ifcfg-eno16780032
TYPE="Ethernet"
BOOTPROTO="none"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
NAME="eno16780032"
UUID="2d1107e3-8bd9-49b1-b726-701c56dc368b"
ONBOOT="yes"
IPADDR0="34.36.140.86"
PREFIX0="22"
GATEWAY0="34.36.143.254"
DNS1="34.36.132.1"
DNS2="34.34.132.1"
DOMAIN="corp.halliburton.com"
HWADDR="00:50:56:AC:3F:F9"
IPV6_PEERDNS="yes"
IPV6_PEERROUTES="yes"
NM_CONTROLLED="no"
#route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         34.36.143.254   0.0.0.0         UG    0      0        0 eno16780032
34.36.140.0     0.0.0.0         255.255.252.0   U     0      0        0 eno16780032
169.254.0.0     0.0.0.0         255.255.0.0     U     1002   0        0 eno16780032
When I reboot the machine, the first line in route table gets erased, I then run:
#route add default gw 34.36.143.254
After which network works fine.
Help required. I don't want to use NetworkManager.

The following might be useful:
https://access.redhat.com/solutions/783533
"When transitioning from NetworkManager to using the network initscript, the default gateway parameter in the interface's ifcfg file will be depicted as 'GATEWAY0'. In order for the ifcfg file to be compatible with the network initscript, this parameter must be renamed to 'GATEWAY'. This limitation will be addressed in an upcoming release of RHEL7."
NetworkManager is now the default mechanism for RHEL 7. Personally I don't quite understand this, because as far as I can gather it is a program for systems to automatically detect and connect to known networks. I think such functionality can be useful when switching between wireless and wired networks, but for a server platform, I wonder.

Help Required - Oracle AS 10g

hello,
i have just downloaded oracle 10g softwares ...
i installed database then developer suite ... everything was fine ... until i was unable to run forms ...
a friend of mine told me that i need to install application server in order to run forms ...
1st of all i want to know that is there any way i can run forms without using Oracle AS 10g ...
2ndly i m facing problems in installation of Oracle AS 10g ...
i have studied online documentation but it ain't so helpfull for me ...
it seems like ... i have to install "Oracle AS infrastructure" first and then "Middle-tier: Business Intelligence and forms" ...
i m using P-IV (AMD Athlon XP 2100+, MMX, 1.7GHz Processor) with 512 MB DD RAM and Windows XP Professional with Service Pack 2 as Operating System.
During installation, the installer is warning dat only "Oracle Application Server (J2EE and Web Cache)" and "Oracle Application Server Developer Kits" are supported installations on dis platform ...
what should i do ... urgent help required ...
regards,
yasir ([email protected])

@ brusardl and rkogelhe
thanx for replying ...
brusardl
i didn't changed da port while installing Oracle AS ...
inspite i stopped all services using/listening from dat port ...
now ... i guess there has been some conflict ... as database listner stops automatically just after starting !!!
rkogelhe
can u plz tell me what is BI version of Forms ...
and can i view forms running on web without installing Oracle AS with OC4J bundled in Forms ???
Another Problem:
I re-installed Database, Developer suite and then Oracle AS infrastructure ...
everthing went fine ...
when i installed Oracle AS Middle Tier - Business Intelligence & Forms
during installation ... some configuration assistants failed/skipped ...
da OC4J configration assistant at 5th last position failed ... so remaining 4 configuration assistants were skipped ...
at da end it said ... Installation Succesfull but with some configuration assistants failed/skipped ...
is dis a installation useless ... can i fix dis ?
regards,
yasir

Help required from JDeveloper Development Team.

HI there,
I Download the JDeveloper 10.1.2 (1811) from OTN, But the downloaded archive file is unable to open. I did the download once again but I am facing same problem. I want to JDeveloper 10.1.2 for the installation of BI Beans 10.1.2.
Help required from JDeveloper Development Team
Thanks For Your Time,
Regards,
ViSHAL.

Please use an informative Subject line, there is more chance that people will read the post.
All we can suggest is that you try the download again.

Help required with (soundcard) connection / settings, thanks in advan

Help required with connection / settings between a Creative Sound Blaster Audigy Platinum EX (soundcard) and a Creative DTT3500 Digital (5. speakers).
The problem
No sound from any of the speakers. (Exception can plug in headphones at front)
Background
My computer has been recently upgraded at my local computer shop and all programs re-installed (including driver update from Creative's website). However after reconnecting speakers and restoring the original settings I?m getting no sound from any of the speakers. I?ve followed all the available advice/instructions I can find on this website and manuals to no avail.
Set-up
Physical
(Digital DIN) Speakers/decoder amplifier (DTT3500) connected to the (digital out) soundcard (Audigy Platinum EX) using minijack to DIN cable. (As per instruction manual)
Software
Creative Audio Consul ? setting as per instructions, however have tried variations in vain. (Note: above tabs there is a select device box with SB Audigy [A0000] in it ? only option. Just wondering what [A0000] means?)
Your advice please. A simple step by step guide would be appreciated, many thanks in advance, Jon

"My computer has been recently upgraded at my local computer shop and all programs re-installed (including driver update from Creative's website). "
Do you have the original installation disk?
If so, try installing THOSE drivers, ESPECIALLY if it worked before. Be sure to uninstall what is there now, first.
Its natural for most people to want the 'latest' drivers for their hardware. However:
After experiencing some difficulties with some CL 'updates' for certain products, I now avoid them UNLESS I am having a PROBLEM with the existing drivers.

Help required...very urgent !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Help required with an error message.
"Table Z0CL_BATCLA for object class CHARGE does not exist"

Hi
It means your Z0CL_BATCLA is not assigned to object CHARGE, you have to create the linke between object and table in the table TCDOB.
You can do it by trx SCDO, but in this case you have to change in standard object.
Max

Help required integration opensso with OAM

Help required integration openssowith OAM
Edited by: user13111258 on Mar 24, 2011 5:58 AM

You will need quite a lot of help so you might consider hiring someone who knows both OpenSSO and OAM. Anyway, which version of OAM are we talking about here as this is very important to know, as well as what types of agents that are involved and whether this is a single domain or cross domain solution.

EDL Export help required

Similar Messages

Maybe you are looking for