EDN: subscribe to the same event deployed on different domain/Servers

We are working on use case where in we would like to publish an Event from an ADF application . We would like to subscribe to the same event deployed on different domain/Servers than the servers on which ADF Application deployed. We would like to get more information on the configuartion of Foreing JNDI for the Business events for this use case. in the documentation it was mentioned, it is possible but not much details were provided.
So far all I have to go on is: http://download.oracle.com/docs/cd/E21764_01/integration.1111/e10224/obe_intro.htm#BABHBGAG

Similar Messages

ICal has dropped a monthly event for the previous four months....... why did it disappear? and where is it? It was the same event but a different day each month.

iCal has dropped a monthly event for the previous four months....... why did it disappear? and where is it? It was the same event but a different day each month.

I installed this same digitizer in my T|X some weeks ago. Some discussion of my experience may be found in this Usenet posting and subsequent thread.
The stock digitizer in my T|X had always had some significant alignment issues (for which PowerDigi was able to compensate very nicely) and sensitivity which was uneven, but which usually required a heavier touch than I liked.
Eventually, it began to develop a “dead spot” near the upper left. My T|X was under warranty, so I probably ought to have sent it in to Palm to be repaired, but I wasn't willing to be without it for the required amount of time, and I've heard enough reports of other T|X owners getting unsatisfactory results this way. I'd heard enough good reports about the PDAPARTS.COm digitizer, that I decided that the only acceptable way to repair my T|X would be to install one of those.
After however many weeks it has been, I am still very pleased with the results. It continues to work flawlessly; it is much more sensitive, so it doesn't require nearly so heavy a touch, and I very much like the hard feel that it has, compared to the spongier feel of the stock digitizer.
My wife's T|X still has its stock digitizer, and it has so far not shown any of the same problems that mine did, or for which the T|X has become notorious, but the feel is noticeably inferior. She's content with it the way it is, but I think that if I were to ever buy another T|X for myself, I wouldn't wait for the stock digitizer to fail. The PDAPARTS.COM digitizer is simply superior in every imaginable way; and, in my opinion, a T|X with the PDAPARTS.COM digitizer installed is sufficiently superior to one with the stock digitizer (even if it isn't defective) to be very much worth the expense and trouble of installing it.
Post relates to: Palm TX

How can I use the same event case for different controls dynamically

OS: Linux 2.6.24-1-686 #1 SMP Sat Apr 19 00:37:55 UTC 2008 i686 GNU/Linux
LabVIEW: Version 8.2
I have a lot of (about 50) controls (numeric, boolean) on my front panel. If a "Value Change" event will be fired by any of them the same event case shall be executed. As I do not want to add all 50 controls to the same event case manually I am looking for a way to do it at run time. Additionally the VI is still under contruction, i.e. controls will be added and removed.
Thanks for any help here.
Regards,
Johannes
Solved!
Go to Solution.

Hi Johannes,
collect all your control references (you can use the FP property for it) and create a user event. Connect this user event to your event structure. Now you have one event case for all your controls. See the attached picture.
Mike
Attachments:
Unbenannt1.PNG ‏11 KB

FCPX 10.1.3 Project vanishes when a new project is created in the same event

I've been working on avery complicated project all day with multiple layered clips with key frame animations, colour effects etc. All was fine until I opened a new project in the same event which I was going to use to create some effects sequences for the main project. When I went back to the original project it was empty. Tried the Undo function in case I had done anything stupid but it was greyed out. Went to the FCPX backups and the last file was almost 2 hours old but did not have any sign of this project. The only thing I have left is all the imported media.
Any ideas? Using FCPX 10.1.3. This is really annoying as all I have left is an h264 file of the almost complete project and it will be almost impossible to start from scratch.
Thanks for your attention

The edited project was 60 seconds making up an intricate title sequence involving 24 video segments and 48 png/ PSD files. Had a brain storm and was wondering if there is anyway the the project could move to another event so currently going through all the event folders on my FCPX edit drive. I just can't see how a project can just vanish.
Thanks for your suggestion.

In FCPX, how do I use multiple clips of the same event?

This is a beginner question, but having recently moved from Final Cut Express to FCPX, I am having trouble using 3 clips (church play, 3 cameras) of the same event (and reading through the manual has not helped me). I have lined them up in the timeline, one "on top" of the other, but the viewer only shows the top clip. I would like to see what the other clips look like and use the cutting tool and opacity (which I found) to choose the best view (and move between the clips lined up with the audio). It feels like I am trying to use an old work flow on a new product. How do I view the all the clips and move between them?

Here is one of those free tutorials (in two parts), which , IMO, is particularly good.
There is also, of course, more comprehensive paid training available that may better fit your needs.
Good luck.
Russ

I have photos from several cameras of the same event, how do I combine them?

I have photos from several cameras of the same events. How can I sort them together, three pics of the same horse from three cameras side by side; I can't move pics from one camera source to another in a folder.

Languare is critical since it is all we have to communicate with
Folders in iPhoto do not hold photos - folders hold only other folders or albums
If you are speaking of events then you simply merge the events (drag one onto another or select two or more and use the merge events command - for the photos to be "side by side" the three camera's time/date setting will have to be identical as photos will be sorted by time/date - if they are not you can correct by selecting the photos in an event (before merging) and using the adjust time and date command or you can make a smart album for the camera and select the photos and use the adjust time and date command
LN

How do I have the same "events" on two Macs?

I have the "family pack" and just installed on both Macs. I have the same exact pictures on both Macs. I organized all the events on one Mac and now I would like to have the same events on the second Mac.
On the previous version of iPhoto, I simply would copy com.apple.iPhoto.plist from the first Mac and copy it to the next Mac. Then all my preferences (e.g., file names, roll names, etc.) would match. This method does not seem to work on iPhoto 08.
Any suggestions?

John:
You could use iPhoto Library Manager and copy the events from one library to another like this. The demo shows an event being copies but it works the same for albums.
You'll need to connect the Macs so you have access to the libraries and then IPLM will do the job.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

How to get rid of mutiple events showing in calenders for the same event

How do you get rid of mutiple events that show up in your calender of the same event. It doesn't matter what kind of event it is whether personel or yearly holiday it shows up mutiple times in the month view, list view. I've gone through and deleted events manually and said for all future events but this is time consuming, because you have to do it for each event. Is there a qicker way of getting this done? Also just an off note I found out that my bluetooth headsets stop ringing throught the ear piece like they did before the upgrade, any insight into this?

If I understand your question correctly...
try the following
from Sources, choose the greyed out streaming library that you want to be rid of...in your case, make sure it is the right one, since they both have the same name.
You should get a screen that says "Library Unavailable" with 2 menu choices below that, "OK" and "Disconnect from iTunes".
Choose disconnect from iTunes and the library should be gone from your Sources.

Can I have multiple event structures with the same event cases?

Hello,
I'm doing an application that reproduces the front panel of the HP6675A power supply. To achieve this, I have done a state machine with different states
(initialize, measures, voltage, current, ocp, ov, store, recall, etc). In each state, should have an event structure that catches the events of the buttons, like for example: if the current state is the Voltage mode and the user press the current button the next state will be the Current mode. For this in each state of the state machine should be the same event structure with the same events.
My problem is that the Vi doesn't work properly when I have multiple event structures with the same event cases. There are some possibily to do this, and how? Or is impossible to have multiple events? I have been reading some posts, but I don't find solutions.
Any help is appreciated.
Thank you very much.
Solved!
Go to Solution.

natasftw wrote:
Or as others mentioned, make two parallel loops. In one loop, have your state machine. In the other, have just the Event Handler. Pass the events from the handler to the state machine by way of queues.
A proper state machine will not need the second loop. The "Wait For Event" or "Idle" state (whatever you want to call it) is all you really need in order to catch the user button presses. The setup is almost there. Maybe add a shift register to keep track of which state to go to in the case of a timeout on the Event Structure.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How do I get videos and pictures taken in the same event to show in a slideshow in the order they were taken?

How do I get videos and pictures taken in Photos and the same Event to show in the order they were taken? Pictures and videos are seperated with videos at the end of both Photos and the Event.

You're welcome.
What's likely happened is that when you transferred the video to the new machine they lost their dates.
Photos use the Exif metadata to record the date and time of the shot. This is quite different from the date and time of the file, which can change as the file is copied from place to place. Video doesn't have Exif, and so iPhoto uses the file date, and that's changed.
Simply, there's no absoultely reliable way to date video.
Try assign dates with the Batch Change command under the Photos menu.

My iphone calendar wont sync with my outlook calendar. My inbox seems to be syncing just fine, its just that my iphone calendar is not showing the same events i have in outlook.

my iphone calendar wont sync with my outlook calendar. My inbox seems to be syncing just fine, its just that my iphone calendar is not showing the same events i have in outlook.

Hi
I have the a similar problem - only I can't actually get the calendar to show up. I've added the account and it's showing Mail and Notes but not Calendar. But I'd like it to show the outlook calendar.
I'm going to
Go to settings > mail contacts calendar
select your account that's affected
But under that account there isn't a calendar showing and I can't see any options to add it?

How do I make my laptop Mac communicate with my iMac so that the calendars have the same events

I am trying to get my Macbook Pro to have the same events on the calendar that are on my imac as well as the contacts be the same. Is it not iCloud that is suppossed to be doing that automatically? If so, it is not on mine. What do I have to do?

Hi vinobeeno,
You have to make sure that you are signed onto the same iCloud account on both Macs, and that you have Contacts and Calandars turned on in iCloud on both Macs.
If the checked information is not getting pushed to both Macs, then try signing out and then back into iCloud on each one.
Cheers,
GB

Duplicate reminder emails for the same event

Some of my users are experiencing duplicate reminder emails for the same event. These duplicates have the same bodies, different message-id headers and posted at exactly the same time.
Has anybody seen this sort of behavior and know a fix.

We had the same problem. At us I noticed the start/stop from the server went wrong. There were double processes running from the server. You should have 1 admin process, 1 notify process, 1 enpd process and (same as your cpu count) httpd processes.
When the other ones are more then 1, restart the system.
This receiving double e-mail reminder problem, you will only find at people who have AND event notifications on AND event & task reminders on! People who don't have BOTH activated, don't receive double reminders.
Also watchout that your test calendar system can't send e-mail notifications to your production users. But this you can see by reading the headers from the e-mail .. the system where it comes from is then different.
Hope this helps.
Greetz,
Miranda

Workflow sending 20 email notifications every one hour for the same event

Hi Experts,
We had an issue on a clientu2019s prod system that the workflow triggered the same event 20 times in one hour. Later, a client has resolved the issue by removing the information from the workflow administration and reentering it back again. The workflow administration contains email settings, web settings, workflow roles, and active workflow maintenance. Although, the issue has been resolved but a client still needs to know how that happened. I would like to get some helpful opinions on how this happened because I am very new to the workflow. I would really appreciate your opinions.
Thank you
Don P.

Hi Sue,
Thank you for your response. I am not sure if the event has been triggered erroneously. The client told us that it didn't happen in the dev system when he tested it, but it only happen in the prod system. This project went live a little bit over a year ago without any issues, but it just happened the first on 6/22.
The event is about to notify the user to review a new incident report (EHS), and it's same event id for all 20 email notifications. We will a client to look into their system about how this event raised?, what does the event log reveal? and if he uses the event queue. Again, thanks for your response.
-Don P.

Room. All of my photos are filed as Events. Is it possible to back them up in such a way that they are kept in the same Events that they are currently stored?

I use iPhoto and iMovie and I want to safely take the media off my Mac Air (to give me more space) and store it for future use. All of my photos are stored as "Events". Is it possible to store them on an external NAS drive in such a way that they are kept in the same Events folder that they are currently stored so that I can, in the future, reload them onto the Air in the same Events folder? I really do not want to have to create and name folders for thousands of photos!
Your help is appreciated!

Easiest solution: move the Library to an external disk:
Make sure the drive is formatted Mac OS Extended (Journaled). Note: you cannot use a NAS for an iPhoto Library.
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

EDN: subscribe to the same event deployed on different domain/Servers

Similar Messages

Maybe you are looking for