Education App Highlighted in Steve Jobs' press release for the ipad 2

Does anyone know what the education app is that was highlighted during Steve Jobs press release for the ipad 2? It showed a child in a classroom tracing a number or letter outline; and it looked like chalk when he traced it.

I'm pretty sure it isn't. I might be wrong; but I've searched images of mathboard and it looks to be more for advanced elementary and junior high math. The images shown in the press release were of a kindergarten-age child tracing a single number...more of a learning your numbers/letters than working with math. It showed an outline of the number/letter that the child traced with their finger--as far as I have researched, there is no feature like that on mathboard (where there is a 3"-4" number or letter that the children are to trace to learn their numbers/letters).

Similar Messages

Has an actual date been released for the iPad 3 Siri, or is it still in the vague season known as "fall"?

I'm looking to buy an iPad, however I am just wondering if there is a set release date for the iPad 3 + Siri. I'd really prefer not to buy an iPad and then find out a week later that there as been a new iPad + Siri release! Thanks.

emma_may wrote:
I'd really prefer not to buy an iPad and then find out a week later that there as been a new iPad + Siri release! Thanks.
Apples Software Update process is easy enough to do if you were to buy an iPad with iOS 5.1.1 (current) and upgrade to iOS 6.0 when it is released.
http://www.apple.com/ios/ios6/

Do I need to pay for the iPad version of an app if I have it for the iPhone

I received an iPad as a gift from my wife, and I also own an iPhone. Since there are some apps that work on both systems, do I need to pay again for an iPad app that I currently have on my iPhone? App in question is MLB.TV. I currently own it for the iPhone and would like to get it for the iPad (since I that the iPad version is really good). Do I need to pay twice for the same app?

The apps are divided into three categories on my iTunes:
1) iPhone, iPod Touch and iPad apps (These will transfer to your iPad and are optimized for iPad, automatically, or uncheck any you don't want on your iPad under "Apps" when your iPad is connected to your computer to sync. These apps have a + sign by them to indicate that they are for multi-platforms.)
2)iPhone and iPod Touch apps (You can use these also, on your iPad. These are usually vertical apps and you can select 2X after opening them on your iPad to make them bigger. The resolution may not be very good on these apps, since they are for the smaller screens.)
3) iPad apps (These have to be purchased specifically for the iPad. They usually look and perform great since they are made for iPad. There are many free versions of iPad apps which I already had on my iPhone and iPod Touch.)

How do I delete apps in os5? I press and hold the icon and they all begin to shake but the little x does not appear allowing me to delete.

How do I delete apps in os5? I press and hold the icon and they all begin to shake but the little x does not appear allowing me to delete.

You can't delete any of the Apple built-in apps e.g. Music, App Store, Game Centre etc. If you don't get the 'x' on any of the apps that you've downloaded then check that Settings > General > Restrictions > Deleting Apps isn't set 'off'

I have a presentation to make to a customer and need to know how many educational apps are there for the iPad/iPod?

I have a presentation to make to a customer and need to know how many educational apps are there for the iPad/iPod? More specifically special education apps.
Thanks

Keep in mind as well that not all apps are "created equal". Some are really good, and others are not very good. You might also want to look at some education sites for recommendations. An example of a general iPads in education forum is
http://ipadeducators.ning.com/
but I imagine some exist for special education needs as well. Our healthcare organization is using some apps for working with autistic children and find them very helpful.

After installing 8.2 on my iPad all the apps crash during use. It appears that the iPad saves a version of what I was using because after the app crashes I double press the home button an there is a screen of an older version of the page I was using.

After installing 8.2 on my iPad (2nd gen) all the apps crash during use. It appears that the iPad saves a version of what I was using because after the app crashes I double press the home button an there is a screen of an older version of the page I was using. I swipe it away and start over, only to have the same thing happen again. I have reinstalled all the apps, rebooted, synced and re-synced with iTunes. This is VERY irritating!

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

My iPhone says I have 5 app store updates. I press update and the wheel just spins and it never updates. the Icon stays black like its updating, but in never does

my iPhone says I have 5 app store updates. I press update and the wheel just spins and it never
updates. the Icon stays black like its updating, but in never does

Hello Donna,
I'm sorry to hear you are having issues with your iPhone. If you are having issues completing your app updates, you may want to make sure you can otherwise access the iTunes Store/iOS App Store. You may want to try the troubleshooting steps outlined in the following article:
Can't connect to the iTunes Store - Apple Support
If the iOS version listing in your post profile is correct (iOS 8.0.2), you may also want to make sure that your iPhone is updated to the most recent version of iOS:
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
Sincerely,
- Brenden

App throws error when loading in browser for the first time

I have designed an app for outlook which I am testing in the web version of office. When I first click on the app it says there is a problem loading the app and I have to press reload. The app is a asp.net app but the most of the code is an angular SPA. Is there a way of stopping this error.
Chris

Hi,
The platform requires that Office.js is invoked within 5 seconds of us navigating to the page of where your app is. Can you make sure that you are adding the Office.js script at the very top of the page?

BETA UEFI Releases for the A75MA-G55 [MS-7696 PCB v1.0]

I am uploading the latest BETA Release for the A75MA-G55 [MS-7696 PCB v1.0] mainboard.
Currently, the latest version is E7696AMS.13A [=v1.3b10].
E7696AMS.120 ---> E7696AMS.13A
- Fix ps2 kb/mouse issue when WHQL test.
- Update Llano-AGESAMSI module.
- Update VBIOS to AMD_SUMO_GENERAL_100.
- Update Llano-AGESAMSI module.
--->Fixed DRAM Timing incorrect when DRAM insert DIMM3 or DIMM4.
------> a) When OC Genie Enable and insert 1600Mhz Memory, system will reduce Memory frequency to 1333Mhz, but work timing still use DDR1600. DRAM Timing mode must be set to Manual at this moment.
------> b) When OC Genie Disable, above setting have be set to Auto.
- Add CPU FAN 3/4 PIN ITEM and System FAN1 SMART FAN Support.
- Fixed select RAID mode and SATA decive plug on SATA1 or SATA2, system will hang CP#B2 issue.
- Fixed AMD USB3 yellow mark issue in WHQL test.
- Patch System FAN1 SMART Fan Support.
- Fixed CPU/System1 SMART Fan cannot work on first setting.
- Patch two Memory fail issue.
----> G.Skill F3-1066CL7T-3GBPK
----> G.Skill F3-1066CL7T-6GBPK
- Patch TL-584 and RST.
- Fixed when Enabled TPM support, system will hang CP#4F 40 Sec issue.
- Update TMP patch.
- Update Llano-AGESAMSI module.
- Update SB module to 4.6.4.1_AMD_SB900_017.
- Update AHCI module to 4.6.3_AhciSrc_017.
- Update CSM function.
- Update PEI Ram Boot module to 4.6.3_PEIRamBoot_10.
- Update smiflash module to 4.6.3.6_SMIFLASH_19.
- Update shell module to 4.6.3_SHELL_20100528_01.
- Update fixedbootorder module.
- Update post time tune module to 4.6.4.0_PTT_06.
- Update to 4.6.3.7_AgesaV5_039.Modified AGESAMSI setup menu for OCICC.
- Show cpu ratio in cpuz module.
- Add ukey function.
- Add VGA display rule.
- Adjust Initiate Graphic Adapter default to PEG.
- Fix some time will hang 0Dh by fixbootorder function.
- Fix plug PCI/PCIE lan card can't boot issue when the "Lan Option ROM" item set disabled.
- Fix mflash boot issue.
- Change setup item "Enhanced Spread Spectrum" to "Lab Burst Mode".
- Fix memory-z part string issue for some memory.
- Enable C'n'Q function as default and C1E item.
- Add clear cmos function.
- Adjust VGA display rule.
- Fixed Lab Burst Mode always enable when OC more than 133Mhz successful then load default.
- Fix bev device cannot boot.
Please note that flashing this release occurs entirely at your own risk! >>Use the MSI HQ Forum USB flasher<<, Method II for best results. Do NOT use the BIOS/UEFI integrated M-Flash Routine.

E7696AMS.146 ---> E7696AMS.140
- Add UEFI_Driver module for doing raid and installing UEFI OS.
E7696AMS.140 ---> E7696AMS.150
- Add Agesa MSI Source safe version 4.6.3.7_Llano-AGESAMSI_040-4.
- Modified AGESAMSI Adjust Ratio function incorrect.
- Support CMOS bad flag in AGESA Platform Configuration.
E7696AMS.150 ---> E7696AMS.162
- Fix USB keyboard and mouse would useless after using m-flash boot function.
- Fixed system can't boot up when press 'Del' or 'F11' key with using AMD A4-3300 (AD3300OJZ22GX/HX) sometimes.
E7696AMS.162 ---> E7696AMS.163
- Fixed clear coms or use M-Flash update bios "Windows Boot Manager" will lost.
- Fix windows boot order will be disordered after clear coms or load default.
Please note that flashing this release occurs entirely at your own risk!
>>Use the MSI HQ Forum USB flasher<<, Method II for best results.
Do NOT use the BIOS/UEFI integrated M-Flash Routine.

Anyone know if there will be a Garageband app for the ipad?

I'd buy one today if I could use it with Garageband. The flexibility of being able to take it anywhere and record/edit tracks, considering it's size and the excellent screen, would make it worth the money to me.
Just wondering if anyone has seen/heard anything about such an app. There would have to be a way to use the USB port as an input, but other than that, you could save the files the your mac but be able to move it around so easily...would be great.

Apple has not announced GarageBand for the iPad nor anything similar but that doesn't mean that they won't release something in the future. Meanwhile, there are companies like Sonoma WireWorks and Krasidy that are already producing multitrack recording apps for the iPad or iPhone. Sonoma has a version specifically for the iPad, so that might be worth checking out.
I haven't seen anything that uses the Dock connector to expand the input capabilities, but there may be something out there, or the new SDK may allow such a thing in the future.
Regards.
Message was edited by: Dave Sawyer

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

Background job got cancelled for the user ----- Isolation and resolution

Hi Experts,
One background job got cancelled for the user I have the Jobname and User...
Able to view the log information in SM37.
I am not sure what is the next step to do and how to resolve this issue.
Could any one please provide me the step by step Isolating the issue and resolving it.
That would be really greatfull.
Thank you in advance.
Regards,
Prem.

Hi,
What the error it was stating in that SM37 job log?
Pls post that error log, not completely just mention the error here we'll try to help you.
rgds,

Is there an app for the ipad that will allow you to access your mac.

Is there an app for the ipad that will allow you to access your mac via wifi or cell network.

Yep, two of the most popular apps are "LogMeIn Ignition" and "iTeleport." Check them out, they'll both set you back by about 30$ though.

I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini. don't need the caps/lock or ctrl key and due to an injury my daughter can only use her left hand to type. She is using a text to speech app to verbaliz

I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini. I don't need the caps/lock or ctrl key. Due to a brain injury my daughter can only use her left hand to type. She also uses a text to speech app to verbalize all of her needs since her speech isn't intelligible any longer either. And her vision was significantly affected also, so the keyboard has to be mounted about 6 inches from her face. So to reach across the keyboard with her left hand to the right side delete and enter button is physically difficult and causes typing errors, which cause people to not understand what shes trying to say.
The best keyboard so far is the Zagg folio mini. I just had to make stickers to enlarge the letters on the key buttons.
Does anyone know how I can reprogram these two keys? Or where I can buy a wireless mini keyboard for Ipad made for lefthanders with these two functions on the left side. I have searched for days and days. It's sooooo important to me that she be able to contribute her voice again. Imagine if you got in a car accident and couldn't speak clearly any longer, but understood everything still. Thanks for any help and suggestions you all take the time to share with me. I really appreciate the kindness of strangers to help me help my daughter.
Sami's mom

Sami\'s mom wrote:
I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini.
You cannot.

I buy for mac app but not for the iPad, so how do I reinstall a program that has already purchased? I need help because I bought the imovie'11 but when he opened it only brought 8 movie trailer templates instead of the 15 it says on the program. How do I

I buy for mac app but not for the iPad, so how do I reinstall a program that has already purchased? I need help because I bought the imovie'11 but when he opened it only brought 8 movie trailer templates instead of the 15 it says on the program. How do I solve this problem? Once paid for a program incomplete. I also liked that the AppStore itself had a button to reinstall programs already bought, because it is very hard to understand how to do this in the store, only option is to install and hide purchase, and how do I reinstall, attention'm talking about reinstalling a computer mac, not an ipad or iphone.
Thank you.

Prodesigntools.com , go ahead and download the software from there and use your serial number to serialize it.

Education App Highlighted in Steve Jobs' press release for the ipad 2

Similar Messages

Maybe you are looking for