Education Cess JECP is not calulating on JMOP

Hi,
We're using TAXINN Procedure.
While craetion of PO, when we use manual excise COndition JEXC, we observed that the E cess Condition JECP (2%) is calculating on 10% value of BASB (which should be calculated on JMOP only)
But sec ed cess JSEP(1%) calculating properly on JMOP.
We've maintained FV11 at tax code level. Both the conditioTypes JECP & JSEP are configured similarly. But getting the same problem.
can any body provide the solution to come out of this error?
Umakanth R

Hi
Go to OBQ3 and select your tax procedure which is TAXINN and doubble click control and choose the condition type JECP and check from & to whether it is calculating on BASB which is Gross or JMOP if it is on JMOP thats is correct and if it is on BASB thats is incorrect. Hope this helps you.
Edited by: Shubham RT on Sep 28, 2010 11:22 AM

Similar Messages

Higher education cess not appearing in the excise invoice

Hello experts,I am presently in a support project of a big aluminium project in india,
my question is while i am creating the excise invoice using the transaction j1iin then with respect to the proforma invoice,what is happening is that the excise invoice is appearing in the create mode of the excise invoice,but once while we are going to save the document and after opening in the change mode,i see the document does not contain the higher education cess.and also the transactionis not hitting the gl account
pls guide me as soon as possible
Thanking you,
Anshuman.chakraborty

Dear Anshuman
Please make use of the search option b4 posting any question as this particular topic was discussed repeatedly in the last one week.
Meanwhile answering to your question, please ensure that your system is loaded with latest patch updation.
thanks
G. Lakshmipathi

BED & Higher education cess are not appearing in J1IIN in export sales

Dear Experts,
we have scenario,
- 1000 & 2000 Plants are excisable
- Excise group is same for 1000 & 2000 plant
- Serial Group is different for 1000 & 2000 plant.
we enter materials from 1000 & 2000 plant for creating a export sales order ( IN one export sales order we enter material from different plant), in which excise duties are showing correctly even though we enter different plant in sales order. even commercial invoice also properly generated with proper excise duties but when we try to create excise Invoice (J1IIN), BED ,Education cess and Higher education cess are correctly appearing for the materials of plant 1000, but only BED and Higher education cess are appearing for the material of plant 2000, +not appearing the Education cess in the excise invoice moreover that excise accounting entry too+
But when try to create same scenario in domestic sales , all the documents ( Right from sales order to Excise invoice are working properly ,all the BED,Cess,Hcess are also properly appearing and accounting entry too.
please help me to resolve the urgent issue.
Shibu Chandran

Hi,
As i said above you can not see those accounting entries for excise invoice in export.
you can see the accounting entries for excise invoice in domestic sales process.but not in export process
to see this difference you can just go to v/08 and select your pricing procedure for export sales,here you can see the tick mark for statistical field for all excise conditions.but you can not see this tick marks in domestic pricing procedure.
and also as i said above you check those settings in J1ID T-code
for this in J1ID select cess rates-click on change icon-here check whether you maintained plant-material-check AT1 field along with other fields like BED%,CESS%
and also check EXCISE TAX RATES in that J1ID there you should have excise rates for chapter id combination
and finally check material and chapter id combination
Try this and let me know

EDUCATION CESS IS NOT PICKING FROM MIGO.

HI
I AM CHANGED EXCISE BASE VALUE IN MIGO.WHILE DOING MIRO EXCISE IS CALCULATING ON THE BASIS OF PO. AND ITS SHOWING WRONG CALCULATION ON VAT.
REGARDS
SARINBAVA
Edited by: Csaba Szommer on Feb 4, 2012 8:34 PM

Hi,
Check condition type for Secondary education cess is there in following path where you specify which condition type is used for which sort of tax, if not add with tax procedure
SPRO --> Logistics general > tax on Goods Movements> India > Classify Condition>Condition-Based Excise Determination Types
Also check TAX Procedure in t.code: OBYZ & see condition type for Secondary education cess is there with all condition types and all are placed with a logic to calculate taxes with total price.
Regards,
Biju K

Higher Secondary Education Cess not flowing in Excise Invoice

Dear All,
When I create my excise invoice the higher secondary education cess is not flowing in my excise invoice.The BED and the Secondary education Cess of 2% is flowing in the excise invoice.Please let me know why this amount is not flowing in the excise invoice.
Kind Regards
Atul
Edited by: Atul Keshav on Sep 15, 2009 8:16 AM

Hi,
Go to IMG u2013 Logistic general u2013 tax on goods movement u2013 india u2013 basic setting u2013 determination of excise duty u2013 maintain excise defaults.
Over here check whether you have maintain any setting for the secondary education cess over here or not.
Regards
Raj.

Education Cess and Sec Edu Cess not appearing in Excise Invoice

Hi all
i have a small issue and I am not very familiar with the CIN configuration.
When I capture the excise invoice, only Basic Excise Duty is appearing in the invoice but Education Cess and Secondary Education Cess which is there in Sales Invoice is not getting captured.
For example;
If BED is 1000 Rupees; Edu Cess 20 Rupees and Sec Edu Cess 2 Rupees; only 1000 Rupees is getting captured in the Excise Invoice.
Kindly let me know am I missing any G/L account settings.
Thanks and Regards
Adithya

Thanks Prasanna/JP
The mistake was from my side. I had not maintained condition records for these condition types.
     JEXT     IN A/R BED total     100.000      %
     JECT     IN A/R Ecess TOT     100.000      %
     JHET     IN A/R S&H eduCesTOT     100.000      %
The values are capturing now in excise invoice.
Thanks and Regards
Adithya

Higher Education cess not displayed in J2I6 when posted through J1IH

Hi,
We have passed an Excise JV through J1IH.
BED, ECess and HECess accounts are credited and Excise Duty paid A/c is debited.
All the values are posted properly. We have also checked the accounting document for this.
But when we run the report J2I6 (after J2I5), HEcess value is not showing, where as all other values are displayed properly.
Where may be the problem?
Is there any SAP Note we need to apply?
Regards,

HI,
There is no relation ship between your tax procedure (eg: TAXINN) and withholding tax confirguration. Please check the does the higher education cess is getting posted or not when you post FI invoice. If it's fine, it should post when you do MIRO.
Withholding tax will not be posted when you do MIGO, it will be posted when you do MIRO only.
Please use the same vendor for FI & MM invoices posting. If still there is any issue in higher education cess posting - please check withholding tax configuration.
Regards,
Kiran Yelamarthy

Secondary Education cess (AT1) not updating in Export excise LOuT

Hi,
I am trying to create excise invoice for export process bond (Letter of undertaking).
The basic excise and education cess are flowing in excise invoice as calculated in Commerical invoice.
But the Higher education cess ( for which i am using AT1) is not flowing in Excise invoice and subsequently in ARE1 document.
It is properly calculated in commercial invoice( Pricing procedure)
Your valuable inputs are welcomed.
Regards,
Amrish Purohit

Hi
If SeCess values are appearing in your billing document and its not copied to your excise invoice then please check the below two settings:
1. Check whether the AT1 indicator for Excise Registration Number is active under CIN cusotmization.
2 IMG>Logistics General>Tax on goods movements>India>Basic settings>Determination of excise duty>Maintain Excise defaults:
Here ensure that all SeCess condition type is properly maintained for your TAX PROCEDURE.
Example if you are using JA1X-SeCess condition type in your pricing procedure.
Then check you have maintained as follows:
A/R AT1 Cond...........JA1X
A/R AT1 Perc............JA1X.
The above setting is required only if you are using percentage condition type. If you are using both percentage and Total condition type in your pricing procedure. Then it has to be classified as below. JA1X-SeCess Total condition type JA1Y-SeCess Percentage condition type
A/R AT1 Cond...........JA1Y
A/R AT1 Perc............JA1X.
Regards
MBS

Secondary Higher Education Cess is not calculated in Tax Amount in MIRO

Hi,
I am facing a problem with SHECess which is implemented in recent budget changes in INDIA through SAP Notes.My problem is that when I made PO all duties and other taxes are calculated and showing correctly in PO as well as in Print Preview in PO.
But when I am trying to post the MIRO the system is not taking in to account the SHECess and also SHECess on CST.I checked several times but the results is the same.This is happening only for Depot Purchases for goods procured locally.
Plz help me if any one encounters this situation and give me the solution as early as possible becz it is utmost very urgent.

Hi,
Check condition type for Secondary education cess is there in following path where you specify which condition type is used for which sort of tax, if not add with tax procedure
SPRO --> Logistics general > tax on Goods Movements> India > Classify Condition>Condition-Based Excise Determination Types
Also check TAX Procedure in t.code: OBYZ & see condition type for Secondary education cess is there with all condition types and all are placed with a logic to calculate taxes with total price.
Regards,
Biju K

Education cess and Higher ed Cess is not appered in J1IIN

Hi;;
while creating excise invoice (J1IIN) Education cess and Higher ed Cess is not appered in J1IIN.
BED is coming properly in J1iin, even billing document (VF01) also posted properly with proper GL A/C.
i have done excise default setting in spro, even J1id also maintain.
or , any note apply? this is new implementation. version SAP ECC 6.0
kindly reply as soon as possible.
-Mangesh

Mangesh Dongre
Go to IMG-Logistic general-Tax on goods movement-India-Basic settings-determination of excise duties-condition based excise determination-click on classify condition types
--check whether your Education cess and Higher ed Cess condition type is assigned to the excise pricing procedure.
check in account determination
--specify excise accounts per excise transaction
--specify g/l accounts per excise transaction
Regards
Pradeep

Secondary education cess is not refected in migo

Dear sir,
I have created condition type for import purchase order .Basic excise duty,cvd,Ecs etc...
All condition type is reflected in migo screen at time of good receipt but SeCess is not reflected so please guide me to solve this problem.

Hi,
Check condition type for Secondary education cess is there in following path where you specify which condition type is used for which sort of tax, if not add with tax procedure
SPRO --> Logistics general > tax on Goods Movements> India > Classify Condition>Condition-Based Excise Determination Types
Also check TAX Procedure in t.code: OBYZ & see condition type for Secondary education cess is there with all condition types and all are placed with a logic to calculate taxes with total price.
Regards,
Biju K

In j1ih OTHR Secondary education cess G/L account is not picking

HI,
Thanks in advance,
while doing j1ih in OTHR we are not getting in Secondary education cess G/l Account, we are getting only BED, ECS , Excise duty paid,
i all ready maintained in account determnation OTHR RG23A AT1 ,
Regards,
Prema.D

Hello Prema,
Please check the following table J_1ITRNACC whether you have assigned dr/cr for RG23AT1 under ETT MRDY. I think you were checking for ETT OTHR. Please check for MRDY.
Hope this helps.
Vikas.

Secodry Cess and Education Cess is not reflecting

Dear SAP SD GURUS
The following things are happening while processing j1iin for domestic orders
Cenvat suspence account
RG23A BED
Secondry Cess
Education Cess
The following things are happening while processing j1iin for export orders
Cenvat suspence account
RG23A BED
The remaining Secondry Cess and Education Cess is not getting reflected in the accounting and even the same has not been reflecting in the j1iin screen
Kindly Guide me.
Regards,
Anand

Hi,
Reaz
Thank You for the reply
Not in J2iun. while processing J1iin after clicking FROM BILLING another screen appears with BILLING DOCUMENT, POSTING DATE and SUBTRANSACTION TYPE after this screen appears we will press enter. After pressing enter another screen appears, in that screen you can see the utilization button at extreme left of the screen or you can press (F6) for utilization.
Regards
Anand

Higer education cess is not flowing to excise invoice.

Hi All,
Higer education cess is not flowing to excise invoice.
whats the note number need to be applied?
Reg,
Amol

Check the below link,try to do the same setting which was suggested by Mr.Lakshmipathi.
Higher Secondary Education Cess not flowing in Excise Invoice
Ram

Secondry education cess not flowing

Dear all
Secondy education cess not flowing in excise invoice for certain material,BED and shec edu cess is dispalyng in excise invoice ,this is in particular to only few materilal,for rest of material BED,E cess ,SHE cess is flowing
Regards

Hi Subramanya
Even if you maintain the material and chapter id combination in J1ID, if you have not indicated "1" in the tab "<b>Declared</b>" in the last but one from right side against the respective material, the value will not flow.
Check that whether you have indicated "1" in this column.
Thanks
G. Lakshmipathi

Education Cess JECP is not calulating on JMOP

Similar Messages

Maybe you are looking for