EEEgads, I have used ITUNES for my Ipod Shuffle for years and now it is a nightmare with 11.0, I can't find my Ipod when I connect to Itunes, it is a new Win 7 PC. It used to show up on left side and I would slide podcasts right over to it for years,
EEEgads, I have used ITUNES for my Ipod Shuffle for years and now it is a nightmare with 11.0, I can't find my Ipod when I connect to Itunes, it is a new Win 7 PC. It used to show up on left side and I would slide podcasts right over to it for years, I have installed 3x with removing old install. I also can hear a constant throbbing sound in spkrs. when Itunes turned on, pls advise.
Hi Becki ..
You need to "authorize" the Mac.
Launch iTunes on the Mac then from the iTunes menu bar top of your screen click Store > Authorize This Computer.
Now, using the same Apple ID as you used to purchased iTunes media originally, you should be able to sync all your content.
More details here > iOS: Syncing with iTunes
Similar Messages
-
After upgrading the itunes, I can not find my ipad when it connects to the PC
After upgrading the itunes, I can not find my ipad when it connects to the PC
Before that, I can see an botton said my ipad. And then I can click it to operate my ipadTry this
Go into the control panel. Add/remove programs. Uninstall iTunes, Apple mobile device service, apple application support. Then go out and redownload and reinstall iTunes and try again.
There seems to be a glitch with a recent update and one way to overcome it is to just start over. If that doesn't work there are more in depth things you can do. -
Keep getting can not find %appdata% file when trying to download itunes. do you know of a fix?
Have HP600PC with Windows 7 64-bit. Keep getting Can not find %APPDATA% file when I try to download Itunes and other software. Do you know of a fix?
Here you go, this should do it.
http://support.microsoft.com/kb/2258121 -
I have an iPhone 4s I have gone to iTunes and everything has been synced in the clouds.
Buuuttttt when I go to my iPhone which I purchased last year in 2012 I started it up with a computer I no longer have.
When I go to setting and then go to "iTunes Wi-Fi Sync"
I get the following message: Sync will resume when -----Pc is available. well this computer is no longer available. And the area on the iphone showing up is in grey so it won't allow me to syn via wi-fi
I downloade some txt messages alerts a long time ago and no matter what I try I can't get them on my phone. they show up in iTunes but can't get them to my sound section on my phone.See this older post from another forum member Zevoneer covering the different methods and software available for assist you with the task of copying contents on your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
I have unplug and plugged in my iPod to my pc 100 times and admin never comes up. When i go to iTunes I don't see anyway to
get to the iPod admin. I copied quite a few of my CD's into iTunes but can't find a way to sync the player with the itunes on my computer.
I don't like the new update...it changed the look and feel of everything...for the worse.Many people haven't yet figured out the new default interface in iTunes 11 but it's not that difficult. To get to the iPod information so you can sync, click the iPod button in the header bar at the upper-right, e.g.:
Or go to the View menu and select "Show Sidebar" and the interface will then look substantially like it did in earlier versions. If you are running Windows and don't see the menus, press Control-B or go to the small icon with the arrow at the extreme upper left and select "Show Menu Bar":
Regards. -
I lost my Ipod touch. I have downloaded Icloud but did not complete registration. I have back it up with Itunes 2 weeks ago in my computer at home. I am out of town. How can I find my Ipod touch?
In order to use Find My iPhone (or iPad, etc), your device has to be connected to iCloud with a valid ID/account, the Find my iPhone service has to be turned on (on the device), in Settings>iCloud. It sounds as though you haven't done these tasks - unfortunately, there's no way to track your lost device.
BTW, you don't "download" icloud, you register it on a device by going to Settings>iCloud and then click the ON switch and entering your ID/password (perhaps this is what you meant by downloading iCloud). -
How can I find out which .pst or .ost file itunes referres to when synchronising with outlook
I´ve switched to iphone 4S from my 3Gs and would like to "clean" my itunes Sync before I use the new phone. Problem is, that the synchronisation with Outlook 2003 doesn´t work anymore. I guess the reason is that itunes refers to an old .ost or .pst file on my computer. I ve got several outlook profiles and changed from exchange to pop3. My question: How can I find out which .pst or .ost file itunes referres to?
Thanks a lot in advance :-)Select the tune and then - Get Info - in the dialog box is a note of the Apple ID used to purchase.
MJ -
I have an iphone 4 that I use as an iPod. It is not connected to a wireless network. I have updated to the IOS 7 and now it won't sync with my computer. Does anyone know what could possibly be the problem?
Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created. -
i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/software for my device even though i have the latest itunes on my computer. i have tried reinstalling itunes but it still cannot find my phone and now i cannot use my phone as it is stuck on the sync to itunes screen
Have you downloaded and installed the latest version of iTunes from here:
http://www.apple.com/itunes/download/ -
I used to sync my iphone to a laptop which is no longer in my posession. I am now looking to start over and have a new itunes on my pc with no music on it. When i connect my iphone up to the new itunes it doesn't recognise it or sync - can anyone help me?
The new iTunes has a somewhat different look from the previous version. You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes. Or you can adapt to the new look.
-
Hi, I have already bought Adobe Photoshop and Lightroom for 1 year. Now I will change my PC to Mac. Can I use Photoshop and Lightroom in my new Mac?
Yes.
Mylenium -
Ipod Touch can't find Bluetooth device. (Jam Box)
Upgraded Itunes software did a backup and restore on the Ipod.
My PC sees Jam Box fine. IPod used to work with JamBox. Reset Jambox, no luck.
Followed every instruction from the forums. Still no luck.
Reset Jam Box to factory settings.Did a network reset on the Ipod after the backup and restore. No luck
-
i have an ipod touch and for some reason cannot connect to itunes store. I have full wifi and can get on my safari and was able to update my apps before. I can still get apps but when i try to update it says cannot connect to itunes store. Some1 help!
See these previous dicussions:
App Store Updates (but only Updates)...: Apple Support Communities
Apps suddenly don't update: Apple Support Communities -
I am so confused. I just downloaded Itunes. I set up an Apple ID with a password. Now I want to buy a song. I can't do it. I keep getting the message: "This Apple ID has not yet been used with the Itunes Store. What am I doing wrong?
You haven't opened an account with that Apple ID in iTunes. Open iTunes and log in. A dialog will appear in which you need to enter your Apple ID and/or password. Below it you should see a link for creating a new account. Click on that link to get started.
-
i have a 2008 imac with snow leopard. i installed update 10.9.3 not realizing it's best for Maverick's users. Now my Itunes 11.2.2 won't burn playlists to CD. Anyone else with this problem? CAn I uninstall the 10.9.3 update? Also my HP scannerwill not save the displayed scanned document since this update! it just saves gray.
If you have your old system backed up then erase the drive and restore your backup. If you don't have a backup then backup your entire Home folder. Erase the drive and install Snow Leopard after which you can restore your Home folder from the backup.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Or you can:
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).
Maybe you are looking for
-
A friend gave me an ipod and i have no purchase date and i no longer have access to my friend
Ok so my brother was given this ipod as a present about 2 years ago by a friend of his as a gift. This friend was met at a farmers market in Los Angeles and my brother only got to be in contact with this friend on the weekends when he would sell frui
-
Converting data to char in double quotes.
I need to create a comma separated txt data load file. Each column has to be within double quotes. "Material","Plant","SOrg" ..... Currently I am doing something like this. .. Loop at table, for each field, concatenate " field value ". But I find thi
-
Selection variable for dynamic selection in QE51n
Hi All, I have a scenario were we have a repetitive Manufacturing and we create one insp. lot of origin 13 and keep creating insp. points for days, so my user wants the insp. points to be displayed only for the past 3 days based of the Date Insp. poi
-
Problems With Reports server in Oracle 10g IAS
I am having problems with the reports server. It keeps on giving me the error below REP-51002: Bind to Reports Server <myreportservername> failed I am able to correct it by restarting my server while my backup server is off the network and playing ar
-
Modified plist file and now "Contents: (null) Version ? (Build ?)" Help!!
I was trying to trick mac into thinking it had newer operating system so I could activate Iphone. Now it does not think it's 10.3.9 so skype and firefox no longer function. Please help!