EEM - Netflow detector using application name
Hi Guys
I'm attempting to set up a detector that fires when an application is seen.
I've set up the flow monitor
2951-HQ#sho flow monitor AppWatch cache
Cache type: Normal
Cache size: 4096
Current entries: 55
High Watermark: 55
Flows added: 586
Flows aged: 531
- Active timeout ( 30000 secs) 8
- Inactive timeout ( 300 secs) 523
- Event aged 0
- Watermark aged 0
- Emergency aged 0
IPV4 SRC ADDR IPV4 DST ADDR APP NAME
=============== =============== ================================
10.66.236.61 10.66.236.218 prot icmp
10.66.236.243 x.x.x.x port telnet
But not having a lot of luck when attempting to create the detector
event manager applet AppWatch
event nf monitor-name "AppWatch" event-type create event1 entry-value "port telnet" field application name entry-op eq
Router returns:
%EEM: Failed to register event(s) for applet AppWatch: 'Embedded Event Manager' detected the 'warning' condition 'invalid parameters'
I'm runnig c2951-universalk9-mz.SPA.152-3.T2.bin
Its probably the obvious, but I'll take any tips
cheers
Peter
(after I exit configuration
Hi Peter,
This blog may help you. We did something similar with Flexible NetFlow Performance Monitoring. It is a two part blog and it makes use of something similar with EEM. Please vote on our posts if they help you.
Jake Wilson
NetFlow Knight
Similar Messages
-
Using Application Name twice while registering a Concurrent Program
Hi,
When we create a Concurrent PRogram,
1) We first create an executable. In the executable screen, we give the name of the Application like Receivables, Payables etc.
2) Next we Define the Concurrent program and attach the executable. Here also we give the Application Name like Receivables, Payables etc.
Question is, when the executable already has information about the Application Name, then why do we have to give it again in the Concurrent Program Define Screen.
Looking for a prompt response.
Thanks
SaurabhHello Helios,
I dont have any problem in creating a concurrent program or executable.
I am just trying to understand the concept that why do we need to give the Application Name twice, one while Creating the Executable and one while define the Concurrent Program.
Because if you look at the executable, we already have give the Application Name and then we attach this Execiutable to the Concurrent PRogram Defintiiion, then why again we give the Application name in the Concurrent PRogram Def Screen.
Thanks
Saurabh -
Log Name: Application
Source: Application Error
Date: 2/26/2014 2:16:26 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: SuperFlyXPS
Description:
Faulting application name: msn.exe, version: 10.50.19.1000, time stamp: 0x51ddb7de
Faulting module name: MSHTML.dll, version: 11.0.9600.16518, time stamp: 0x52f365cb
Exception code: 0xc0000005
Fault offset: 0x00175363
Faulting process id: 0x1260
Faulting application start time: 0x01cf32a011d4aeb4
Faulting application path: C:\Program Files (x86)\MSN\MSNCoreFiles\msn.exe
Faulting module path: C:\Windows\system32\MSHTML.dll
Report Id: a1704306-9f33-11e3-acde-782bcbac25e5
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-02-26T22:16:26.000000000Z" />
<EventRecordID>80997</EventRecordID>
<Channel>Application</Channel>
<Computer>SuperFlyXPS</Computer>
<Security />
</System>
<EventData>
<Data>msn.exe</Data>
<Data>10.50.19.1000</Data>
<Data>51ddb7de</Data>
<Data>MSHTML.dll</Data>
<Data>11.0.9600.16518</Data>
<Data>52f365cb</Data>
<Data>c0000005</Data>
<Data>00175363</Data>
<Data>1260</Data>
<Data>01cf32a011d4aeb4</Data>
<Data>C:\Program Files (x86)\MSN\MSNCoreFiles\msn.exe</Data>
<Data>C:\Windows\system32\MSHTML.dll</Data>
<Data>a1704306-9f33-11e3-acde-782bcbac25e5</Data>
</EventData>
</Event>
need help with . . .Hi,
I found a useful link:
MSN has encountered a problem needs to close or MSN is not responding Error
https://answers.msn.com/solution.aspx?solutionid=11abae39-d906-4113-bb4e-ecfaa81798f0
Please take a look of this part
(Common Faulty Module on MSN
Mshtml.dll)
*Instead of MSN, here is a another software called Skype, just instroduce it to you, hope you can enjoy it.*
Yolanda Zhu
TechNet Community Support -
The name 'rolename' is in use by the cluster already as network name or application name
I removed windows cluster ISCSI target server few days back since it was not needed and now its needed as we need since its a clustered storage space and we need this role for ISCSI storage to external server. Now when I add the role again I get this error
The name winiscsi is in use by the cluster already as network name or application name
I double check role is not installed . I even rebooted both nodes
adHi Adnan-Vohra,
Could you post the original error information or the screenshot about this error, I can’t find out any similar error explain, we can not install the iSCSI target on any cluster
node we need the separate server as the shared storage.
Failover Clustering Hardware Requirements and Storage Options
https://technet.microsoft.com/en-us/library/jj612869.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
# The Application Name that you provided has already been used.
"# The Application Name that you provided has already been used. Please provide a unique Application Name."
Anyone else getting this when trying to update their apps description on iTunes Connect?I get this error, too, and have been getting it since my app launched (about 2 weeks ago). My first email to [email protected] was met with a "We're working on it" reply, but they have been ignoring me since. Pretty frustrating.
-
BSP call using the application name created in reserved namespace
Hi,
Can you please help on the following.
How to call a bsp applicaion that is created using reseverd name space(Ex: /eee/*****) by using the bsp call tag.
Ex: say my application name is /eee/prodlist.If i give the application in the below format it is giving me the error.even I tried giving single / also.
<bsp:call url="..//eee/prodlist/vhelp.do">Hi,
Go through the sample codes present in the below links,
http://help.sap.com/saphelp_nw2004s/helpdata/en/9d/1ca7f91b76ad4493d62b8ecc7c83db/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/7e/d31c3d8679e94a809d4739433c4e44/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/d7/5a693c114bf147e10000000a11402f/frameset.htm
Regards,
Azaz Ali. -
Bugreport: imported Application can't be edited because it uses " in Name
APEX 4.2.1
I imported an 4.0 Application into 4.2.1 which was successful. When trying to edit that Application in the Application Builder an error message is displayed saying that Application can't be edited because it uses invalid symbols like < and >.
The Application didn't use < or > but it used double-quotes " in the Application Name.
As Workaround i used the search box in the application builder to directly jump into edit-page (enter <app-id>-<page-id> into the search box), from there i went to application definition and removed the double-quotes. Now the application can be edited again.
brgds,
Peter
get Syntax Highlighting for the Application Builder: http://apex.oracle.com/pls/apex/f?p=APEX_DEVELOPER_ADDON:ABOUT:0:::::
+Blog: http://www.oracle-and-apex.com+
+ApexLib: http://apexlib.oracleapex.info+
+BuilderPlugin: http://builderplugin.oracleapex.info+
+Work: http://www.click-click.at and http://www.wirsindapex.at+
+Fantastic Plugins for APEX: http://www.tryfoexnow.com+But if you're creating a commercial app, that's not going to inspire confidence in customers. Has anyone been through the process of using an Apple ID to configure an AIR installer so it doesn't come up with this message? It thought I was finally getting close to being set when I invested in the certificate to avoid a similar message in Windows. Now I need to understand how to sign the app so customers don't think I'm some rogue developer by encouraging them to shortcut their security settings. Any suggestions would be greatly appreciated.
-
SSO Deployment-specific login - howto display application name
I am deploying 4 forms applications using a single SSO server/OID for authentication. The problem is, I want to display the application name on login.jsp, depending on which application was requested.
For example:
If the URL is http://localhost/forms/frmservlet?config=app1, then login.jsp should display "App1".
If the URL is http://localhost/forms/frmservlet?config=app2, then login.jsp should display "App2".
...... and so on. Has anyone ever done it before? I am using Oracle 10g Release 2.
Thanks,
Sanjay GulabaniThanks to timktaylor's earlier post (messageid=1184036), I was able to solve this problem. I am using Oracle 10g (10.1.2.0.2) Single Sign On and Forms Services.
For anyone who is facing a similar problem, I am pasting the code - just use it as it is in login.jsp - of course, you will need to change app1 and "APP 1" etc to suit your application names.
(%ORACLE_HOME%\j2ee\OC4J_SECURITY\applications\sso\web\jsp\login.jsp):
<%
String str_token = null;
try
str_token = request.getParameterValues("site2pstoretoken")[0];
catch (Exception e)
try
str_token = request.getParameterValues("Site2pstoreToken")[0];
catch (Exception e1)
str_token = null;
if(str_token == null)
throw new Exception("The site2pstoretoken value not found");
//Code to decode site2pstoretoken starts here
java.sql.Connection con = null;
try
oracle.jdbc.pool.OracleDataSource ds = new oracle.jdbc.pool.OracleDataSource();
ds.setURL("jdbc:oracle:thin:@ngt-hyd:1521:orcl");
con = ds.getConnection("orasso", "UBrWt0c9" );
java.lang.String query = "begin ? := wwsso_utl.unbake_site2pstore_token('" + str_token + "',?); end;";
java.sql.CallableStatement cstmt = con.prepareCall(query);
cstmt.registerOutParameter(1, java.sql.Types.VARCHAR);
cstmt.registerOutParameter(2, java.sql.Types.VARCHAR);
cstmt.executeQuery();
java.lang.String x = cstmt.getString(1);
if (x.toLowerCase().indexOf("config%3dapp1") > -1) ngd_app_name = "APP 1";
if (x.toLowerCase().indexOf("config%3dapp2") > -1) ngd_app_name = "APP 2";
if (x.toLowerCase().indexOf("config%3dapp3") > -1) ngd_app_name = "APP 3";
if (x.toLowerCase().indexOf("config%3dapp4") > -1) ngd_app_name = "APP 4";
if (x.toLowerCase().indexOf("oiddas") > -1) ngd_app_name = "Delegated Administrative Services";
javax.servlet.http.HttpSession session = request.getSession();
if (ngd_app_name.trim().length() > 0) session.setAttribute("ngd_app_name",ngd_app_name);
out.println("<center>");
out.println(ngd_app_name);
out.println("</center>");
finally
if( con != null ) { con.close(); }
//Code to decode site2pstoretoken ends here
%> -
How to get application name from a receive location?
Hi all,
I am trying to do a custom error application, and I want to notify system admin users that "the receive port XXXX has stopped in application YYYYYY".
Right now I do know which receive location that is being suspended. But I am not being able to get the application name, associated to this receive location (I can also get the ReceivePort, if it matters).
I've tried 2 ways:
> using WMI
> Using SQL (direct query in BizTalk databases - for testing).
I did not found any solution, even search table by table, i did not found a relation between Applications and receive location..
Anyone?
Thanks in advance
Ricardo BessaThe following SQL query should give you a result of every disabled receive location as well as it's receive port and application:
SELECT
RL.Name AS ReceiveLocationName
, RP.nvcName AS ReceivePortName
, APP.nvcName As Application
FROM [BizTalkMgmtDb].[dbo].[adm_ReceiveLocation] AS RL WITH(NOLOCK)
INNER JOIN [BizTalkMgmtDb].[dbo].[bts_receiveport] AS RP WITH(NOLOCK)
ON RL.ReceivePortId = RP.nID
INNER JOIN [BizTalkMgmtDb].[dbo].[bts_application] AS APP WITH(NOLOCK)
ON RP.nApplicationID = APP.nID
WHERE
RL.[Disabled] = -1
ORDER BY Application ASC
Christian @ IntegrationAdmin.com -
How To Remove A Specific Application Name From The "Open With" Dialog
When you right click on a file you are presented with the "Open With" menu item and you are also presented with a list of applications that could potentially be used to open that file.
In my case, when I click on a file of type .mov I am presented with the name of an application that I want to remove from the list, because that application ( Miro.app (2.5.2) ) no longer exists on my system.
What is the best way to remove that application name from the list?Ok, but how does one remove some of the applications that are appear in the context menu for a given file type? Is there an asc file which can be edited?
For example, in my system a PDF can be opened with over 10 applications. I would like to see just the three ones I use: Acrobat, Skim and Preview.
Thanks in advance. -
How to find the list of un used table names in a schema?
Hi,
I have a doubt in Oracle. The doubt is that If we are using any tables in Function Or Proc.... Then...We can list all those used table names from USER_DEPENDENCIES system table. Right...
But, If the table is used with Execute Immediate Statement, then, those table names are not coming out with USER_DEPENDENCIES system table. Because they are identified at run time and not compile time.
It is fine. And I agree.. But, If I want to list out those tables also...then...How to do? Any idea?
I think ‘USER_SOURCE’ system table may not be the right one. If there is any other system table avails for this purpose...then..it would be very grateful to extract right...
So I am wanting that exact system table.
Please let me know about this, if you have any idea or check with your friends if they have any idea.
Regards,
Subramanian GHi Guys,
Thanks for all your answers.
Yes....You are all right. We can list out the used tables upto certain extent. Anyhow, I have done some R&D to derive the SQL's which is given below:
SELECT TABLE_NAME FROM USER_TABLES
MINUS
SELECT DISTINCT UPPER(REFERENCED_NAME)
FROM user_dependencies
where
referenced_type='TABLE' and UPPER(NAME) in
select distinct UPPER(object_name) from user_objects where UPPER(object_type) in
'MATERIALIZED VIEW',
'PACKAGE',
'PACKAGE BODY',
'PROCEDURE',
'TRIGGER',
'VIEW',
'FUNCTION'
UNION
SELECT UT.TABLE_NAME FROM
SELECT TABLE_NAME FROM USER_TABLES
MINUS
SELECT DISTINCT UPPER(REFERENCED_NAME)
FROM user_dependencies
where
referenced_type='TABLE' and UPPER(NAME) in
select distinct UPPER(object_name) from user_objects where UPPER(object_type) in
'MATERIALIZED VIEW',
'PACKAGE',
'PACKAGE BODY',
'PROCEDURE',
'TRIGGER',
'VIEW',
'FUNCTION'
AND REFERENCED_OWNER=(SELECT sys_context('USERENV', 'CURRENT_SCHEMA') FROM dual)
) UT,
( SELECT * FROM USER_SOURCE
WHERE NAME IN
( SELECT DISTINCT NAME FROM USER_SOURCE
WHERE TYPE NOT IN ('TYPE')
AND
UPPER(TEXT) LIKE '%EXECUTE IMMEDIATE%'
) US
WHERE
UPPER(US.TEXT) LIKE '%'||UPPER(UT.TABLE_NAME)||'%'
AND
(UPPER(US.TEXT) NOT LIKE '%--%')
The above SQL Query can list out unused tables by checking the Dynamic SQL Statement also upto some level only.
Once we extracted the list of unused tables, having a manual check would be also greater to verify as it is should not impact the business applications.
Regards,
Subramanian G -
BADI for changing Appraisal document application name for Web dynpro ABAP
Hi,
For Appraisal document customizing through PHAP_CATALOG_PA, We have BADI HRHAP00_BSP_TMPL to change the BSP application name which can be used in Web layout for output display. Using this we can change application name from HAP_DOCUMENT to custom BSP application name
Similarly, what is the BADI for changing Web dynpro ABAP applictaion name? Currently its triggering HAP_MAIN_DOCUMENT.
how do we change application name to some custom web dynpro application name
Regards,
KothandHi Karim,
I don't know, if there is any chance to get the Webdynpro application name. At least in the ABAP System fields is no information about the webdynpro application name.
One remark: I have allways problems with BAPIS / BADIS that behave different depending on the caller. Could it be a good idea to pass some information through the interface / parameters?
Best regards
Renald -
How to get Application name of a current running process in LiveCycle??
Hi,
I want to get the Application name of current running process in LiveCycle as a output value.
I have 3 applictions, the 3 applications are calling same SubProcess, so I want get the name of the application from which the sub process has been called.
I want to retrieve the Application name and asssign this value to a output variable.
I have searched for the solution I found a method getApplicationName() but inorder to get the current running process's Application Name this might not be useful..
So suggest the way to resolve this..
Thanks in Advance.....
Regards,
Kalyan UrimiUse an input/output string variable in the subprocess and set its value in each calling process as respective Application name.
May be if this could help.
Thanks,
Wasil -
when i try to open my Itunes this Message comes up
Problem signature:
Problem Event Name: BEX
Application Name: iTunes.exe
Application Version: 10.6.3.25
Application Timestamp: 4fd16377
Fault Module Name: CRYPTUI.dll_unloaded
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 4ce7b847
Exception Offset: 68221040
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 5129
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txtTaken at face value, you're having trouble with a Windows operating system file there.
Perhaps try an sfc /scannow. For instructions, see the following Microsoft document:
How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7 -
Problem Event Name: APPCRASH
Application Name: firefox.exe
Application Version: 23.0.1.4974
Application Timestamp: 520bc252
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6002.18881
Fault Module Timestamp: 51da3e27
Exception Code: c0000005
Exception Offset: 00066448
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 2057
Additional Information 1: bfef
Additional Information 2: e8adce1c2b9e7be834b4063ac3c53863
Additional Information 3: bfef
Additional Information 4: e8adce1c2b9e7be834b4063ac3c53863
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If it works in Safe Mode and in normal mode with all extensions (Firefox/Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit)
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
Maybe you are looking for
-
How to prevent one application from touching the in use Environment?
Hi, all, I have an application opening an Environment and using it well. However, this application may have multiple instance in our system. Once another instance touches the environment it will destroy the former's environment. My question is how to
-
I need help my iphone was stolen last week and some how the person who stole it got my iTunes stuff. I need to change everything so that I can buy stuff for my phone. Please help I don't remember my security question answers ( I made this account whe
-
Print button in Print view not working; how can I get it to work normally again?
Please help: a few weeks ago, my Print button was working fine, then I imported a few 3rd party print templates, and now the Print button is not a clickable option. I've removed the 3rd party templates but it still does not work (see button in botto
-
Installing 32-bit alongside 64-bit
I have the 64-bit drivers installed successfully on my 64-bit Windows 7 system, and they work correctly. I need to install the 32-bit drivers as well, but I haven't been able to make them work yet. When I open the 32-bit ODBC Data Source Administrato
-
Problem in image resolution ( w,h) ??
I need to save JPanel to image but if the panel size is large i get error message java.lang.OutOfMemoryError so how can i solve this problem ? or save special region from panel to image to increase this image size !!!!