Eeprom address and caldacs model/address for pci-6014 and pci-6733

I have one pci-6014 and one pci-6733.
I need to transfer the calibration constants from eeprom to caldacs.
I search the adrress of the constants in the eeprom and the model and address of che caldacs.
Tanks

Hello,
It seems to be a common mode voltage or ground loop problem.
When you are sourcing an output signal from your DAQ board, the signal is already grounded, it means that it has already a reference. If you measure this output with a measurement device, which has also a ground, the both ground potential are not necessary equal. This difference is the common mode voltage and influences your measurement (offset).
Please check the following links to have more detail about grounded signal.
http://zone.ni.com/devzone/conceptd.nsf/webmain/8D907374C5E867F186256C640059F30C?opendocument
http://digital.ni.com/worldwide/france.nsf/webtechsupp/0E6A8D5999CEE1AF8025683C0056A4B1?OpenDocument&node=163080_f
Best regards,
Alexandre D
National Instruments

Similar Messages

I have changed my e-mail address on the apple ID website and have been able to change it for ICloud. My e-mail address (ID) has not changed for I-tunes and therefore, I can't install updates. ??

I have changed my e-mail address on the apple ID website and have been able to change it for ICloud. My e-mail address (ID) has not changed for I-tunes and therefore, I can't install updates. ??

If this is on your computer's iTunes then log out via the Store > Sign Out menu option and then log back in with the updated version of your account. If on an iOS device then tap on your id in Settings > iTunes & App Store and log out and then log back in.

I've an apple ID used to buy off iTunes and a mobileme account for the calendars and contacts. How can I move the calendars and contacts to the older apple ID and use it for iCloud?

I've an apple ID used to buy off iTunes and a mobileme account for the calendars and contacts. How can I move the calendars and contacts to the older apple ID and use it for iCloud?

If you remeber the password to that Apple ID then follow these steps
1 - Make sure you have an email address that is NOT an Apple ID
2 - Go to AppleID.Apple.com
3 - Where it reads Manage Apple ID - Sign in
Once you are signed in want to make sure the email address you are wanting to use is NOT set up as a "Recovery/Rescue" email for this account.
[To check this - Main page where you see Primary ID - below do you see the email address you want to use listed towards the bottom? Yes - Delete / No - Good ./. If made any adjustments "Save" Next on the left select "Password & Security" - Answer your security questions you set up "if you have any" then scroll towards the bottom and check to see if you see the email address you want to use. Yes - Delete / No - Good] <-> Also you can change your password on this page as well. Any adjustments made "Save"
Once this is done go back to the main page where you should read "Primary ID" and change the email address that is showing to the new email address youo want. "Save" Done
I learned this not to long ago and worked for me. Hope this helps you!

I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MEASAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER!

I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MESSAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER! ALSO IF I KILL MYSELF I WILL HOLD YOU PERSONALTY RESPONSIBLE.edit

There is a world of information in these forums if you use the search function near the top right of this page. Just type in NAS for example and you get many threads on the subject (marked with a green checkmark if it solved the question) another example would be Airport Exterme and sound system. Once you formulate your ideas better then specific questions can be addressed one at a time. You may find that a less expensive choice for a server might be a mac mini. Good luck with your project, ask more specific questions and update you systems profile.

Wrong duty cycle (pci 6014 and bnc2110)

Hello,
I want to generate a square signal with labview 7.0, pci 6014 and bnc 2110. I attached my VI . The duty cycle works properly for instance for 10%, 20%, 30% (I suppose that it works because when I anlyse the signal: some pulse seams to not appear ) . BUT when I change the duty cycle constant to 15%: the output is again 20% and not 15%. It's the same case for 17%, 18%....
I really need to create square signal with a perfect duty cycle.
Do you know where is the problem?
Thank you
labview 7.0
Attachments:
Untitled41.vi ‏310 KB

I found the problem for missing pulse: it's the while loop. I delete it and add more samples.
The duty cycle works now due to the precision of the "simulate signal"
labview 7.0

During an app update it froze and has said waiting for 2 days and I am unable to open or delete

During an app update it froze and has said waiting for 2 days and I am unable to open or delete. How do I recover my app?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
iOS 7: Help with how to fix a crashing app on iPhone, iPad (Mini), and iPod Touch
http://teachmeios.com/help-with-how-to-fix-a-crashing-app-on-iphone-ipad-mini-an d-ipod-touch/
Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Delete the app and redownload.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
 Cheers, Tom

I just got the iphone 4 and my husband already had on. we share an itunes account and i signed up for i cloud and now ALL of my husbands contacts are on my phone ... so I started to delete them (because i thought it would just be off my phone) and he cal

i just got the iphone 4 and my husband already had on. we share an itunes account and i signed up for i cloud and now ALL of my husbands contacts are on my phone ... so I started to delete them (because i thought it would just be off my phone) and he called screaming ..." please stop deleting ... they are coming off my phone!" so two things ... how can i get the contacts back ( i got up to j) AND is there a way to get them off just my phone

Unfortunately there's no way to get back the contacts you deleted unless he backed them up somewhere else. He'll just have to recreate them. This happened because you are both syncing contacts with a shared iCloud account. When you do this, the synced data is merged and any actions you take on one phone (such as deleting contacts) is also reflected on the other. To fix this you both need to have separate iCloud accounts (you can continue to share the same Apple ID for purchasing from the iTunes and app stores). To do this, on your phone go to Settings>iCloud and turn all data that is syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on the iPhone. After everything is turned off, scroll to the bottom and tap Delete Account. (This will only delete the account from this phone, not from iCloud. The other phone will not be effected by this.) Next, set up a new iCloud account on your phone using a different Apple ID and turn iCloud data syncing for contacts, etc. back to On. When prompted, choose Merge. This will upload your data to your new account. At this point you will have two different iCloud accounts, one for each phone, with identical data on them.
You will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the unwanted data (such as deleting the your husband's contacts from your account, and vice versa). These changes will be reflected on each phone. When finished you will have individual iCloud accounts with just your own data on them.

My Ipod 5th gen. has been detected by itunes, but could not identified properly, and its been charging for a week and still hasn't come to a full charged. What should I do?

My Ipod 5th gen. has been detected by itunes, but could not identified properly, and its been charging for a week and still hasn't come to a full charged. What should I do?

but could not identified properly
Please clairify.
charging for a week and still hasn't come to a full charged
Sounds like you need a new battery. Take the iPod Nano to an Apple store or an AASP. Whichever is more convenient for you.
iPod Repair Pricing

I downloaded a movie on itunes and turned my computer off and when i turned it back on the movie wasnt there so i went to re download and it says check for available download and it still won't let me down load it. what do i do?

i downloaded a movie on itunes and turned my computer off and when i turned it back on the movie wasnt there so i went to re download and it says check for available download and it still won't let me down load it. what do i do?

Hi runner_girl7585,
Thanks for using Apple Support Communities. If you weren't ever able to watch your rental movie, you can report this to the iTunes Store:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Cheers,
- Ari

My Old macbook pro that i bought in 2009. I have broke my screen and havent used it for a while, and now i have found out that i can use a monitor , but i have forgot my password is there any way i can make a new password? Thank you for reading this.

My Old macbook pro that i bought in 2009. I have broke my screen and havent used it for a while, and now i have found out that i can use a monitor , but i have forgot my password is there any way i can make a new password? Thank you for reading this.

Have you read for possible solutions over in the "More Like This" thread over here?----------------------->

I have a mac OS X and when I close it and reopen my screen opens and then shuts down for an instant and then reopens. Does anyone have this occur?? I have shutdown and restarted often.

I have a mac OS X and when I close it and reopen my screen opens and then shuts down for an instant and then reopens. Does anyone have this occur?? I have shutdown and restarted often.

A Safe Mode boot might help ..
Startup your Mac in Safe Mode
A Safe Mode boot takes much longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple () menu.
See if the problem persists.

My iPad from school is locked, I haven't yet synced it with my laptop and it is disabled for an hour and there is definately a number 7 in it....HELP!!!

My iPad from school is locked, I haven't yet synced it with my laptop and it is disabled for an hour and there is definately a number 7 in it....HELP!!!

Sorry, no one here can help you remember your passcode.

Just upgraded IOS to V7 and iphone is asking for a password and the online password will not work. I really need to get this sorted as I am away and need to get the phone working.

Just upgraded IOS to V7 and iphone is asking for a password and the online password will not work. I really need to get this sorted as I am away and need to get the phone working.

Pablos1966 wrote:
Surely the current ID and Password would work . Anyway I will see how I get on with the Device Password.
No. If you failed to turn off Find my iPhone BEFORE you upgraded to iOS 7, you will need the original Apple ID and password. If you upgraded to iOS 7 you will need this info; there is no way around this. If it is the device passcode you will need to restore your iPhone in order to reset that, which in the end will require your Apple ID and password in order to activate the phone once it is restored.
Why don't you have the original Apple ID? Where did you get the phone?

Is it ok to buy students version and use it mainly for University .. and sometimes i use it to design (logo, Poster, etc ..) for my friends and other peoples

Is it ok to buy students version and use it mainly for University .. and sometimes i use it to design (logo, Poster, etc ..) for my friends and other peoples ?
i care really about this small details

Hi There,
Yes, yon can use if you personal as well as commercial use.
For more info check : Education FAQ
Thanks,
Atul Saini

I have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.

i have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar also..,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.

I am seeing if I can get another battery even though I do not believe that is the issue. It keeps giving me vdd_under which I believe is under voltage, maybe it is just a faulty battery? It charges up like normal and functions normal (when plugged in, or above 90%) but it gives under voltage warnings and shuts down when in heavy use (using camera or going back and forth to imessage). When just sitting idle it doesn't seem to turn off until that 55-60% mark. It may just be a faulty battery because I feel I installed all of the other cables correctly when replacing the screen, and I don't think those connections should affect the battery anyway except for maybe the logic board cable (the 2nd cable to be unplugged after the battery cable) I guess I could clean that out as well with isopropyl just in case.
Any other suggestions would be helpful... and I will get back to you if a new battery helps. Thanks!

Eeprom address and caldacs model/address for pci-6014 and pci-6733

Similar Messages

Maybe you are looking for