EEWB Enhancement not appering in BP

Hi Experts
I've created two enhancements for Business Partner with Easy Enhancement Work Bench in CRM5.0. By selecting the correct package and selecting BUPA as the oblject.
In EEWB everything is green with no errors. But in BP transaction the Customer Data screen is not appering.
Need help on the same.
Thanks
Avi

Avineesh
Have saved the Objects on a Transport Request ?
Have you done the <a href="http://help.sap.com/saphelp_crm50/helpdata/en/81/1d5303c023da438e792316c9d25a84/frameset.htm">Post Processing</a> ?
Thanks
Allot points if this helps!

Similar Messages

EEWB enhancement -Zfields not visible in Customer Fields in CRM online

Hi there,
I've run an EEWB enhancement to add some new fields to Service Process - it seemed to work correctly
and the fields have been correctly added to BTADMIN_H.
I was also able to add them to WebUI screens (as was the requirement) and they function correctly.
I then noticed that the fields are not available to view/edit in "Customer Fields" TAB in SAP online (CRMD_ORDER
transaction), when I create a new service process(complaint).
when I went to regenerate the EEWB, I noticed that many report/screen/table entries that normally appear on the log of data generated by the EEWB were missing (in comparison to previous EEWBs). I redid it a few times, but with no success.
Any suggestions, please, on how to solve this?
Thanks,
David.

Hi,
That is because in EEWB you might have used some other object other than COMPLAINTS.
If you want your field to come in GUI as well then may be you need to delete this EEWB extension and create a new one.
Also check other Business Transaction like activity opportunity may be the that new field is coming in those transactions if you have choosen Bus. object as BUSINESS_ACTIVITY or BUSINESS_TRANSACTION in EEWB.
Regards,
Shobhit

EEWB enhancement destroyed BP_HEAD ??

Hi there,
I did an EEWB enhancement for the objecttype BUPA. I added some new fields and a table as assignementblock. I followed the steps explained in the SAP help and in SAP Note # 1069791.
What happens now is that I get following dumps opening an account overview:
Cannot display view MainWindow of UI Component BP_HEAD_MAIN
An exception has occurred Exception Class CX_BSP_WD_INCORRECT_IMPLEMENT - The view controller or custom controller "" was implemented incorrectly
Method: CL_BSP_WD_COMPONENT_USAGE=>IF_BSP_WD_COMPONENT_USAGE~BIND_CONTEXT_NODE
Source Text Row: 24
An exception occurred during the activation of target view Overview.MainWindow for the navigation
An exception has occurred Exception Class CX_BSP_WD_RUNTIME_ERROR -
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
And actually there is no longer the context node MESSAGEFILTER in the Runtime Repository Editor in the context of the interface controller of the component interface but BUILCONTACTPERSON and BUILRELATIONSHIP.
I'm a bit worried how to get the coding back except doing a system reset (which is obviously not the best solution)
Regards,
Thea

Hi all,
I think the problem is related with the eewb enhancement I did. I've created a table extension for the component BUPA. While doing the postprocessing step BP_EEW_REPOSITORY I did not only extend the component BP_HEAD but also the component BP_DATA.
I assume this step changed the ropository.xml in my enhancementset and my assigned BSP application (Z_BP_DATA). Now the repository.xml of Z_BP_DATA includes also the BP_EEW component views.
At the moment I solved the error by adapting the assigned BSP application for the component BP_DATA in my Z-Enhancementset via the viewcluster BSPWDVC_CMP_EXT in the sm34. Now we use again the standard BSP application BP_DATA including the standard repository.xml instead of the Z_BP_DATA BSP application.
Does anybody know how to undo the EEWB postprocessing step?
Hope you can understand the steps.
Regards,
Thea

NFe 3.10 - Aplicação da nota 2039647 NF-e new layout 3.10 - Enhancement Note 04

Olá,
Estamos no processo de upgrade da NF-e e iniciamos a aplicação da nota 2039647(NF-e new layout 3.10 - Enhancement Note 04) em nosso ambiente 606-06.
Porém, ao aplicar as notas de pré-requisito, encontramos a nota 1900965(Pre-Implementation Objects) que está adicionando novos campos na chamada da função ME_PRICING_TAX_INDICATOR que não existem nesta função.
Instrução de correção 1650688 da nota 1900965 para nossa versão SAP_APPL 606:
Função ME_PRICING_TAX_INDICATOR, não possui o IO_OUT_ITEM e IS_TAXCODE_DETERM:
Pergunta, alguém já aplicou esta nota? Passaram por este problema? Ou.. poderiam indicar, em qual nota estes campos estão sendo adicionados na função? Não conseguimos encontrar onde estes objetos estão sendo adicionados...
Obs: Estas notas 1793108 e 1871295 citadas na instrução de correção que adicionaram a chamada nestes campos, não estão inserindo estes campos na função...
Obrigado desde já!

Olá Eduardo,
Ainda não.. revisei mais uma vez a aplicação da nota e os parâmetros da função não batem com os parâmetros que temos aqui. Até interessante, que esta nota está fazendo e desfazendo ajustes na chamada da função.
Abaixo, destaquei a quinta e última instrução de correção referente a chamada da função:
Aqui, nosso último campo no parâmetro de entrada é o I_EGIMP.
Obrigado,

Photo Edit button not appers in ipad 1 ios 5.0.1

I update my biod, in ipad 1 and now i can not turn my photos. I try to restore software, and nothing. Theroblem is not appers thr edit button when i open a photo. My photos are from camera, no sincronized to pc, i put on ipad via photo kit.

The Photos app on iOS on the first gen iPad doesn't have any editing - you could potentially rotate them via a third-party app (e.g. the free Adobe Photoshop Express), but that will just save them back to the Saved Photos album

I selected restore factory settings on my ipod touch but now after restart it stuck on apple icon what will i do anybody help me out plz,even it's not appering on itunes on my p.c

i selected restore factory settings on my ipod touch but now after restart it stuck on apple icon what will i do anybody help me out plz,even it's not appering on itunes on my p.c

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Pricing messages are not appering in WEB UI?

Hi Team,
Please help me on this.
In GUI crmd_order->sold to party->product's->item's->condition's.
In webui->Account confirmation->create order->item's (add product)->edit the item->Price details assignment block
Here i am createing another pricing condition based some other condition for eg: if the value of the pricicng condition is 4$ and i am adding another condition with value 2$ and click on enter at that i am getting one information(warning)message in popup.
But the same thing when i am doing in WEB UI message is not appering,we need to display same message.
Message details:
Message ID: PRC_PRI
Message number:711
Triggering point:
se38->SAPLPRC_INT
Include prog->lprc_intf02
PLease find the attached imagees for reference.
Please help me on the same.
Thanks,
Narasimha M

Solved using note 1346861.

Enhancement not supported Nokia 6085..Headset prob...

I just bought a new headset (Nokia Music Headset - HS-20) for my nokia 6085 and it fits in perfectly and everything but after a few seconds a screen pops up and says "Enhancement not supported" Any ideas?

1st, on the support page of 6085 your headset is not listed as supported by your phone.
2nd are you sure that the headset is original?
see if you can return it, and ask for a different one and check in the support site
http://europe.nokia.com/A4397271

Education cess and Higher ed Cess is not appered in J1IIN

Hi;;
while creating excise invoice (J1IIN) Education cess and Higher ed Cess is not appered in J1IIN.
BED is coming properly in J1iin, even billing document (VF01) also posted properly with proper GL A/C.
i have done excise default setting in spro, even J1id also maintain.
or , any note apply? this is new implementation. version SAP ECC 6.0
kindly reply as soon as possible.
-Mangesh

Mangesh Dongre
Go to IMG-Logistic general-Tax on goods movement-India-Basic settings-determination of excise duties-condition based excise determination-click on classify condition types
--check whether your Education cess and Higher ed Cess condition type is assigned to the excise pricing procedure.
check in account determination
--specify excise accounts per excise transaction
--specify g/l accounts per excise transaction
Regards
Pradeep

Excise Duty Not appering in GR

Dear all ,
Excise Duty Not appering in GRn for PO ,what may be the possible reasons ?
Pl guide

Hi,
Pls check the J1ID
1. Material maintained in J1ID for that plant
2. Input and output material declared for the plant
3. Vendor excise maintained
4. Excise indictaor for the vendor maintained
5. Plant excise details maintained in J1ID

CS11 &CS12- Moving Price and standard price not appering for items

Dear Gurus,
CS11 &CS12- Moving Price and standard price not appering for items.
is it a bug for my system alone\.
or a bug overall in SAP itself.
Pls advise.
Siva

Dear Siva,
Its the standard functionality of SAP.
You will not get any cost related data in the reports like CS11,CS12,CS13.
You can try CK13N(which shows the components of the BOM along with the cost) or else CK86_99.
At Functional module level execute this one CS_BOM_EXPL_MAT_V2 and ensure X is included for the
input field MBWLS.
And also check these SAP notes 177006 and 686509.
Check and revert back.
Regards
Mangalraj.S

User defined field not appering on web for PO

Hi,
I have created One custom defined field for Purchase Order Herder level
As per specified in Note 672960
I have included in following structure :
INCL_EEW_PD_HEADER_CSF
INCL_EEW_PD_HEADER_CSF_PO
The user defined field appering in Function Module of BBP_PD_PO_GETDETAIL but its not appearing on SRM screen while on click on Process Purcjase Order and create from there.
I have checked in transaction there also not appering .
No Screen variant screen variant defined for that .
Can anybody help me on this issue .
Thanks,
SS

Hi
Have you published all the respective HTML templates of the Internet service in this case. ?
Use transaction SE80 -> Select the drop-down option as Internet service. Give the service name - say BBP_POC (or your service name) in the left hand corner of the screen.
open the respective template screens and
Right click on the service to activate it on the proper Intenet site (Internal or any other sites defined in your case).
Detailed steps to check out (this is a general check-list)
When you are using the Internal ITS,you need not run the report W3_PUBLISH_SERVICES.(only SIAC_PUBLISH_ALL_INT )
ALso pls check the foll:
-->activate the services through SICF tcode.
> Go to SICF transaction and activate the whole tree under the node Deafult host>sap>bc>gui>sap>its.
>Also maintain the settings in SE80>utilities>settings>internet transactuon server-->test service/Publish.
Table TWPURLSVR should have entries for the / SRM server line as well as gui and web server.
Could you please review again the following steps ?
Did you check that ICM was working correctly (TA SMICM) ?
1-Activate the necessary ICF services
With transaction SICF and locate the
services by path
/sap/public/bc/its/mimes
/sap/bc/gui/sap/its/webgui
2- Publish the IAC Services
With Transaction SE80 locate from
the menu Utilities -> Settings ->
Internet Transaction Server (Tab) ->
Publish (Tab) and set On Selected
Site = INTERNAL.
3- Locate the Internet Services SYSTEM and WEBGUI.
Publish these services with the Context
Menu -> Publish -> Complete Service
4- Browse to http://<server>:<icmport>/sap/bc/gui/
sap/its/webgui/! and login to the
webgui.
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

My ahoo mail contacts not appering on ipad?

my ahoo mail contacts not appering on ipad?

Settings > Mail, Contacts, Calendars > [Yahoo Account] > Is the slider on Contacts Off or On? I'm not sure beyond that.

Nokia e5 enhancement not supported

hi guys..i recently bought nokia e5 and i also got headsets ,chargers along with it.After a few days when i plug in my headset 'wh-102 hs-125 stereo headset' into the mobile i get 'enhancement not supported'.Could anyone give me a solution?I tried firmware upgrade and resetting factory settings but none appear to work.Pls help me.Thanks.

I think your headset is faulty. There have been a few other threads about this, such as
/t5/Connectivity/E5-and-Skullcandy-Headset/m-p/917639
My guess is that the phone does some kind of electrical/resistance check with the rings on the connector, and uses the result as a cheap form of plug-and-play. When the phone fails to consistently recognize the headset as a headset, you know the connectivity is failing. When you see an "Enhancement Not Support" message, you know it has totally failed.
Talk to Nokia support or to whoever sold you the E5 about getting a replacement.

Help on error message: Naming convention for menu enhancements not observed

Hi all,
I was trying to enhance a transaction and got into entering function code without following naming conventions (i.e. function codes should start with '+'). It is not allowing me to change it by throwing an error "Naming convention for menu enhancements not observed".
This question was previously posted in the thread -- Re: Error in SMOD ?
which was not answered. Can you help me in resolving this error or revert my modifications that I have done while enhancing?
I appreciate any help in regard.
Thank you,
Deepak

You shouldn't get this message if you just create the implementation. I feel that you are trying to change the definition part of the standard extension, using SMOD transaction. That's bad
If you want to enhance, create a project using CMOD transaction, enter the extension name, then simply double-click the +... function code and enter your text.

EEWB Enhancement not appering in BP

Similar Messages

Maybe you are looking for