Effect applied color bar on clips

In Premiere Pro CC there is an "FX" box instead. Which is fine, but is there a way to make this appear before the clip name so that way I can always see it? Or turn the effect applied color bar back on? It was helpful when applying effects to a bunch of clips to know which ones still didn't have an effect.
Hope there is a solution.

You cannot change the way the clip name and fx box appear or turn the box on/off.
When applying an effect to a clip the fx box turns purple just like it did with the color bar.
If you like to see it different.
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Similar Messages

  • Setting for colored bar under clips used repetedly

    Is there a setting that places a colored bar underneath clips that are used repetedly, but not in the same order? I know this setting exists in FCPro, but cannot seem to find it in FCE.

    If you mean Labels then no, this is not an
    FCE feature.
    Al

  • Colored bars in clip after apply a little motion

    I get these colored bars in my clip after applying some motion effects (kern). Rendering does not solve. Any idea?
    Here is a screenshot:
    http://kttns.org/nkzgy

    I had a very similar problem a while back, but I never found a solution. I think it was somehow linked to using an external USB drive (which is definitely a bad idea!).
    Are you using an external drive to store your media? If so, what type and how is it formatted?

  • Master clip effects applied when replacing clip into after effects?

    Hi Guys,
    Love the new Master Clip effects in Premiere 2014 but im wondering what happens to the effects if I replace the clip in my timeline into an After Effects clip? Will the effects applied to the master clip be disabled for that new AE clip ?
    Best,
    Patrick

    Hi,
    Which effect are you trying to apply?
    Are you making subclips before applying the effect on the Master clip?
    You can apply the effect on the Master clip and then make subclips from it. It will work for you.
    Please refer the link below for more info:-
    http://helpx.adobe.com/premiere-pro/using/master-clip-effects.html
    Thank you.

  • Offline/Missing Image Sequences in After Effects CS6 with Color Bars

    I am working on a stop motion animation in After Effects CS6.  Each clip has been imported as an image sequence from stills on my hard drive.  When I open up After Effects, all image sequences now have color bars over them, as if they are offline.  Trying to reload them does nothing.  I cannot 'link media' because it isn't just one file; it's an image sequence so there are many of them. 
    I first noticed this when the color bars appeared in my dynamically linked comps inside of Premiere Pro.  Everything played smoothly the first time I opened the project in Premiere CS6, after originating in CS5.5.  Then the second time I opened up Premiere, the color bars appeared on the linked comps.  I hadn't yet opened up my AE project in CS6 yet, so when I did, AE converted the project and I resaved it. 
    Any help related to this issue would be greatly appreciated. 
    Mid-2009 Macbook Pro
    Mac OS X Mountain Lion
    8GB RAM
    Adobe Creative Suite Production Premium CS6 w/Creative Cloud

    Thanks everyone, I think I'm beginning to solve this.
    Rick, thanks for your advice.  I tried this and it worked.  The reason I didn't do this before is that, because it is stop motion, I couldn't remember how many frames I had imported for each sequence.  For instance, if I shot 54 images and only imported 52 into the sequence, I wouldn't remember which 52 images to import...this might still be causing a problem, but I don't know yet.  I think in most cases I imported all the images in a folder, so the image sequences should be fine.
    I am having another problem, however.  Even though the issue seems to be fixed in AE, it doesn't seem to be fixed in Premiere...each image sequence is dynamically linked from AE, but each dynamically linked comp is still being show with color bars as they did in AE...I think that maybe my Premiere project is still linking to the old CS5.5 AE project, and not the new one opened and saved in CS6...

  • Finding all clips with a specific effect applied? (CS6)

    I'm just wrapping up a long (2-hour) multi-cam edit and applied the warp stabilizer effect on several clips in the project. As I was skimming the video marking chapters, I discovered some of the clips with that effect had the blue "Analyzing (Step 1)" bar across the clip. Not sure why it didn't complete the analysis and stabilization on those clips originally, but I reran the analysis/stabilization effect and those clips are clean now.
    However, I'm worried I might have missed other instances of the "blue bar" in my skimming. Is there a way to search and find all clips in my timeline that I applied the warp stabilizer effect to so I can check them all?
    Thanks.
    roorider

    Not exactly.
    Any clips with an effect applied have a purple line through them.  But you'll have to click the clip to see which effects are used.

  • Apply color correction to the sequence, not clip

    Is it possible to select all clips in the sequence, then apply color corrector, or brightness/contrast filter _with a specific setting_ to the whole sequence?
    Currently when I select all in the sequence, apply a correction through effects > video ... etc, then change a setting, it will only change the setting one clip from the sequence.
    I know it is possible to work around this and do it with one clip and then paste attributes, but if there's another way, please let me know.
    Thank you!

    Michel,
    That's a great idea, why didn't I think of that? Thank you for your fast reply, I got it near instantly on the iPhone and was laughing at how simple and smart a solution you had!
    Cheers,
    Roman

  • Sound clip level lowers when effect applied??

    Hi Everyone.
    Does anyone know why it is that the sound level contained within a clip lowers substantially after the clip has an effect applied to it (such as Brightness/Contrast?)
    Is there a fix???
    I think I asked this question about 2 years ago... and I believe the answer was sitting on Dansangle site. I just checked but I cannot find it!
    help?!?! please!?!
    Nick.

    A clip's volume is lower after you use an effect or title in iMovie 4
    http://docs.info.apple.com/article.html?artnum=107944
    (Two workarounds are in article)

  • Premiere CC - No playback on HD clips with various effects applied.

    Hi,
    In Premiere CC recently i've been having trouble playing back clips in my projects with effects applied, in this specific case, FilmConvert and Magic Bullet Looks. If I apply the standard Adobe effects, everything seems to work fine.
    Now I know this doesn't sound like a premiere issue, but thousands of people use these software packages and i don't see why my setup is any different. If I disable the effects, the video plays back fine. When I enable the effects, the video doesn't play at all, it just stays on the last frame of the previous non-effected clip.
    This is in a very large project, it's for a feature length documentary so there are many types of footage, most of what I am applying the effects to are ProRes or AVCHD files.
    System:
    Windows 7 Professional 64 Bit
    Intel i7 4770k 3.5ghz
    Nvidia Geforce GTX 780
    32gb Ram
    Samsung 840 SSD as system drive
    Western digital black's as footage drives
    Mercury Playback (cuda) is enabled in premiere.
    Any ideas?
    Thank you.

    I would expect your system to handle those effects without too much difficulty.  Unfortunately, I don't have any ideas about what the hang up might be.
    You could try resetting preferences.
    https://blogs.adobe.com/genesisproject/2011/02/premiere-pro-cs5-maintenance-two-great-tips .html

  • Apply same effect to a collection of clips?

    I am on Premiere cs6.  I have a collection of travel clips (100+) that were shot handy held and were a little shaky.  I tried using the wrap stabilizer effect on some of them and it helped.  Instead of opening each video clip one by one, apply the effect, and export the result.  Is there a way to apply the same effect on a collection of clips and then export the result? 

    Sure you can.  When you add an effect to the tracks rack, you can reveal an envelope for each adjustment parameter of that effect in envelope section just under the track.  An example of studio reverb is shown below, and by adjusting the wet output level, controls the level of the effect on the clip over time.
    There's a lot to explore using envelopes, and you also change the curve to splines if you wish.
    A lazy mans workaround is to add a duplicate of the clip into a new track with the effect applied (removing or disabling the effect from the other clip), then envelope that new track's volume to blend with the mix, thus achieving a similar effect.  Make sense?

  • How do you apply color fx to all clips in timeline?

    and also how can you fast scroll along the timeline? when i use the mouse ball it doesnt scrub left or right past what is in view to get to end or beginning of timeline?

    To answer the question in the header, its too bad there is no "apply to all" button in the ColorFX controls. There may not be a way to do it, but try to select all the clips on the timeline (quickie group or simply select all in either the shots bin or use a select first clip / shift_click on the last clip in the timeline and then double click on the saved FX tree in the selection menu. Might not work. If there are no other corrections in the timeline yet, you could save the COLORFX tree as a grade and apply that to all clips in the normal fashion.
    As far as scrolling/scrubbing in the timeline, a) you are operating a "three-button" mouse, right? and b) combinations of the buttons, dragging, etc., is the way to expand/contract, scrub and scroll through the timeline. Its covered in the book. It has become a muscle memory for me, so miming the action here at my word processor, I'm thinking a right button drag expands and contracts the timeline and its a middle button drag that scrolls the timeline, while its a left button click that scrubs the content in pseudo playback. Sitting here thinking about it, I don't recall the timeline updates the way FCP does to go beyond the user interface viewer... it hasn't been a show stopper for me.
    jPo

  • Color bars question in Premiere

    See the difference in color bars. The one in the program window at right is quite a bit brighter than than the source view. When I double click the "bars and tones" clip in the project panel, the image opens up in the source view on the left. When I place the same file on the timelime it appears lighter in the program view at right. No effects applied. Why is there such a difference and which should I calibrate with?

    I actually have a Matrox MX02 Mini which has a calibrator, but I find it unreliable. When I calibtrate its color bars, the video looks way too bright - not even close.
    I am still curious about the two different outputs in Premiere. This is a clip after I placed it on the timeline. Source view on the left is quite a bit darker than the program view.

  • Random Flashing Color Bars within Quicktime Files during RAM Preview Only

    I have been getting random color bar flashes within quicktime files in AE CC during RAM previews using Multi Processor rendering. Files other than .mov seem to not have this issue (although I have seen it twice...though it may be due to quicktimes in the comp). The rendered output using MP rendering is completely fine. If I turn off MP rendering the ram preview is fine. The source material is coming off a RAID 5 at 600-800MBs, I have moved the footage to a local SSD and a standard spindle drive with the same results. I have tried everything.....disabling GPUS in preview, disabling Fast Adaptive Preview, Disabling Disk Cache, Adjusting MP settings and RAM usage per core, disabling hardware accelleration of interface, adjusting gpu memory useage, every codec under the quicktime wrapper including uncompressed codecs, updating Blackmagic drivers, updating quicktime, limiting how many processors Windows 7 64bit can see, resetting AE preferences. I even installed After Effects clean on my second boot drive for gaming with no plugins or other apps, same issues. Have discussed this heavily with tech support at Adobe and they are working on it for a few days before getting back to me. When I got off the phone the tech was of the mind that I have too many cores for the Quicktime codec to handle.
    My system :
    Windows 7 64bit
    Dual Xeon E5-2687W: 16 Physical cores and 32 cores with Hyperthreading
    32GB 1866 DDR3
    3xNvidia GTX 680 4GB cards
    SSD boot and seperate SSD media cache drives
    8TB internal SAS RAID 5 using a ATTO card
    Blackmagic Deckline Extreme 3D+ card
    Any help or thoughts would be greatly appreciated as this is a huge boon to my workflow. Having purchased a $12K system for grading and rendering....not being able to use the ram preview in AE with multiple cores is a huge inconvenience.

    Here is the requested taskmanager screenshot. As my test comp only has a single duplicated quicktime in it, it renders too fast to really catch the AE instances doing anything. So this is from a heavier comp. Settings are as pictured above with 3GB per core using 8 total cores of the 32. It did flash the bars.
    Here is what I tried tonight:
    - Followed the link on Quicktime having trouble with too many processors. Using MSCONFIG I dropped the recognized Processors to 21, 16, and 8 and tested all three settings. Each had the flashing bars issue. Again as usual, at random, sometimes 3 previews before showing up, sometimes the first preview run. I have noticed that the ram previews that take a little longer seem to be clean. Then sometimes it seems to fly through the preview, grabbing large chunks on the green progres bar above the timeline, or many little chunks very quickly....these are usually the preview runs that will show the flashing bars. I make a point of purging the cach between each one so it doesn't remember, plus I have disk media cache off, but sometimes I get the feeling it's remembering bits.
    - I removed all the Quicktime Components from the QTComponents folder and tested it. Flashed the very first run without any quicktime components.
    - Followed the Firewall or TCP instructions and made sure everything was allowed through ZoneAlarm. However I could not find the QT32 Server listed anywhere or figure out how to add it. No matter because I closed and force quit all of the firewall processes as well to make sure. Still flashed.
    - I followed all the advice on the landing page for Quicktime-related problems
    - I also tested out ram previews again thourougly with the same clip but converted to a Tiff sequence. No matter what I tried there was never any flashing in the ram preview with tiffs.
    - I also re-tested the clean render output. Made a ram preview with the flashing bars, then without purging rendered it out to a quicktime file and there were no bars at all in the rendered output. I even tried duplicating this render output 6 times in the render queue and rendered them all at once. Not a single one had a flashing bar frame. I even played all 6 1080P uncompressed 4.2.2 YUV 10bit pieces off the RAID with no dropped frames or hichups.
    - Killed every process in the taskmanager but for essential windows processes and the flashing bars were still present
    - Set the priority to Real-time for every AE process including Adobe QT32 Server, Dynamiclinkmanager, and all the AE processes. Still flashed.
    I am now considering disabling two of my GPUs in the device manager. However I'm a bit worried about disabling the wrong one and being locked out. Any thoughts? Is the computer to powerful for some process somewhere? Why only in RAM preview? Thanks again.

  • Dynamic Linked Footage Coming up with Color Bars in Premiere Pro

    I recently had been editing a project in Premiere, and decided to do some work in after effects to the footage using the dynamic link function. It's worked fantastically up until this point, as now it's causing me some grief. I recently built a new PC as the mobo among other hardware was showing signs of making it's way out the door after years of use. I installed the HDD from the previous computer into this system, as well as a brand new HDD. Upon opening up my project, all I see on the footage that's been linked into AE is color bars. I figure this is probably just a case of PP having issue finding the location of the video files but I'm unsure and not entirely sure how to go about solving this issue.
    Any ideas?

    If you only want to tint the entire frame, then you can do so by creating a solid-color clip, putting that on top of the track that you want to tint, and then set the blending mode to Color. Adust opacity of the color matte to taste.
    Toward the bottom of this article, you can see how to do this in After Effects, but the idea is the same in Premiere Pro.

  • Flashing Color Bars - major frustration

    I'm a recent convert from Final Cut Express to Final Cut Pro. I've got a brand new setup using my 15" Powerbook, a Miglia Director's Cut SCART to convert my Firewire to analog video for use with an external video monitor. I'm currently working in PAL with a PAL monitor.
    I just created my first project in FCP; it's set up as DV PAL and I've imported just one PAL DV clip into the timeline.
    My problem: about every 57 seconds I get about a one second flash of colorbars on my external monitor. This is driving me bonkers. It doesn't matter if FCP is playing back the clip, or simply sitting idle.
    I've discovered if I start another app and FCP is no longer the active app, these same bars come on the external monitor all the time. When FCP again becomes the active app, my external monitor again correctly shows video...but with that once a minute color bar flash.
    These bars also don't look like what I'm familiar with in the past. They consist of a single row...there's no second or third row of patches. The first column is half-width and white, followed by the colors and last column is half-width black.
    This flashing is driving me nuts. Does anyone have any idea what's going on here?...and how to stop this?
    Thanks
    Doug
    1.67 GHz 15" Powerbook   Mac OS X (10.4.5)   2 GB RAM

    Andy, your response is well thought out. Shortly after my last post, I discovered for myself these bars are indeed being output by the Miglia box. When I shut down the computer for the evening, only the Miglia box and monitor remained on...and you guessed it...I still had bars on the screen. So the bars themselves are coming from the Miglia box.
    Also, as you deduced, this apparently occurs when the box receives no input. The next logical deduction is that Firewire communication is being interfered with. I was suspicious of that myself. At the moment, I have no anti-virus software installed. Furthermore, I was certain to have all programs shut down and used Activity Monitor to insure any unnecessary processes were shut down as well. (The only thing running was Snaps Pro, which I shut down; everything else appeared to be system stuff.)
    I've used two different cables and two different Firewire inputs. One configuration had the Miglia box on its own bus with nothing else connected. None of this made any difference.
    So at this point, I'm getting suspicious about the Miglia box itself. I'll give them a call today and see what they have to say.
    Thanks,
    Doug
    1.67 GHz 15" Powerbook   Mac OS X (10.4.5)   2 GB RAM

Maybe you are looking for

  • Pb retrieving sorted data from Table in SQL.

    Hi, I get problem to retrieve data in the right order from table in database SQL. See code attached: code.png I want to sort data according to ID number And then to retrieve those data and fill out a ring control in the right order "descending" . But

  • PDF file handling through BPEL

    Hi, We are exploring BPEL as an option to handle PDF files generated by Oracle EBS (BI Publisher). Basically we want to achieve following: Pick up PDF files from certain location on UNIX box and then a. Spliting the PDF file into two or more files (d

  • Logic Studio, not compatible with my new iMac?? downloads or updates available?

    I just bought a new IMAC 21.5 And Logic Studio from Apple Store. After installing Logic I get the message that Logic doesn't support my version of computor? Spec PROCESSOR 3.1GHz Quad-Core Intel Core i7 MEMORY 16GB 1600MHz DDR3 SDRAM-2X8GB HARD DRIVE

  • How do I tell if the RMAN Registration has worked correctly?

    Am using Oracle, DataProtector and SAP with RMAN and am registering the database in RMAN using the standard DataProtector commands. How do I tell that the database has actually registered the catalog inside the RMAN DB? I can do a "list backups" but

  • HandBrake Converted videos do not play

    I cant get these videos to play on my Mac nor my PC. But they play just fine on my Zire 72. I am using the latest QT on both machines. Any tips?