Effect for making horizontal TV screen lines

I want to put part of a video in speeded up reverse and also add the lines so it looks like an old video tape fast reversing.
Is there a preset effect for this in AE CS5?
Kind of like what's in the image below:

Look for "bad TV" or "rewind" presets on ze web. There are a couple of them available, either from tutorials or direct downloads. There are even plug-ins (GenArts Sapphire, Digieffects, Boris Continuum) in many effects packages. Of course you can always build your own from effects like Venetian Blinds, Fractal Noise, various channel and distortion effects. All depends on your experience and what specific look you're after.
Mylenium

Similar Messages

Cant Capture Screen Recordings with QuickTime Player for making App Previews

cant Capture Screen Recordings with QuickTime Player for making App Previews
went into that page:
https://developer.apple.com/app-store/app-previews/imovie/Creating-App-Previews- with-iMovie.pdf
upgraded to quick time 7 pro
got stuck here:
" 4. In the window that appears, select your iOS device as the Camera and Microphone input source".
the window appeared, no selection is possible

The instructions in the Developer page you link contemplates that you are using the QTX version instead of QT7 Pro:
vs.
QT7 Pro does not allow selection of iOS devices as the Camera and Microphone  input source.
QTX is the QT version included with Mac OS X v10.6 Snow Leopard and later. However, as explained in the Developer page you linked above, if your Mac is not already using it, you need to upgrade to the current (OS X 10.10 Yosemite) OS X Version to use iOS devices as the recording sources in QTX.
Message was edited by: EZ Jim
Mac OSX 10.10.2

[Solved]Kwin doesn't restore Suspend desktop effects for full screen

Hi! I am using latest Kwin with Plasma 5 on my Arch and I have noticed that I have to check "Suspend desktop effects for full screen windows" in Desktop Effects>Advanced every time I log in.
What's wrong with Kwin?
Solved: Kwin 5.2 is under development now so currently this functionality is not availible.
Last edited by artem.jackson (2015-02-19 00:41:43)

It saves the state for my NVIDIA blob but does not for Intel laptop. It also warns that not every setup is able to redirect, so maybe he thinks our cards are unsupported and unchecks it?

In Safari when I turn my phone to horizontal the screen does not rotate is there a setting for this?

How do I get my phone (iphone 4s to rotate the screen in Safari) it works in the photo app?

I solved the problem! After turning the rotate to unlock you must re-boot the phone. Then when you are in Safari, etc. and turn the phone horizontal the screen rotates from portrat mode.

Is there a way to enter a title for a menu on two lines in a horizontal popup?

My popup menu is too long because there sdoes not seem to be a way to adjust individual cell widths. All the menus conform to the largest-widest text.
Is there a way to line break into two lines or adjust some of the menu widths?

You can set widths under the Advanced of the pop-up menu editor, but not for individual cells. There is currently no method for wrapping text to two lines.

Problems with overage charges and making account changes on line

I have quite a bit of history involving my attempts to resolve the problem of catching my account before it goes over the minutes allowed and making the changes on line (to cut down on call volume) to change my account to raise the minutes allowed for that billing cycle. I was given one reason why it didn't work the first time (I didn't print out my confimation proving I made the changes - bit the bullet and paid those charges) and so the second time wanting to avoid the problem from the first time I made sure I printed out my confirmation. The confirmation had an effective date of change of 07/19/2012 the day I was informed I was nearing my allowed minutes. There were only 4 or 5 maximum days left in that billing cycle so I wanted to nip the problem in the bud and make the changes to my account to be made "that" day. My confirmation said the changes were effective 07/19/2012. In plently of time before that billing cycle ended. Again I was told I did something wrong. This time I'm holding my confirmation in my hand even as the person is telling me again I did it wrong. The purpose Verizon wants it's customers to use the available on-line option is to cut down on their call volume. I didn't go to school to get the knowledge apparantly needed to perform these particular tasks in a manner that is acceptable to Verizon. Has anyone else had problems with trying to fix their problems themselves using Verizons "helpfull" on-line choice?

I have an explanation for you by what was meant by "you did it wrong."
When you make a change effective the date you are requesting it and not at the start or end of your billing cycle, your minute usage for that month is pro-rated.
For example, you say you made a change, because you were nearing your allowance limit, on 7/19/2012 and wanted it effective that day with 5 days left in the billing cycle. Lets assume that your allowance is 700 minutes/month and you were at 675 minutes for that month(still under your monthly allowance). If you make a change effective with 5 days left in your billing cycle to the 1400 minute/month allowance, your allowance for the 1st 25 days of your cycle will have been pro-rated to (25/30) * 700 = 583 minutes. This would mean you would have already had an overage of 92 minutes for the 1st 25 days of the month. Additionally, you would have a pro-rated allowance to use the last 5 days of (5/30) * 1400 = 233 minutes. This is how the pro-rating works when you make a change effective during the middle of your billing cycle.
What you need to do next time to avoid these overage charges is to make the change effective at the beginning of your current billing cycle. So if you had made the change on 7/19/2012, but your billing cycle ended on 7/24/2012(5 days later), you should have made the change effective at the beginning of your current billing cycle, or 6/24/2012. This is called backdating the change. In this instance, you would have received a credit on you account for the cost of the 700 minute plan and been charged the full amount for the 1400 minute plan on your next bill, which I believe is a net additional charge of $10 and you would have had the use of 1400 minutes for throughout the entire month. In this example, you would not have had any overage with your 675 minutes during the 1st 25 days of your cycle and would have been able to use 725 minutes over the last 5 days of your billing cycle. This is much better than the overage charge you would receive with 92 overage minutes @ $0.45/minute = $41.40.
I hope this explains it.

Steps to create tabstrip for subscreen in selection screen

hi,
can let me know the steps taken to create subscreen in selection screen and put in tabstrip?
i need to have 3 screens. 1000 being the tabstrip, 2000 being first subscreen and 3000 being the second subscreen.
i have the abap code but i do not know the steps to create especially 1000 screen.
for 2000 and 3000, once i activated the program, these 2 screens added but i do not know where can i create the 1000 screen.
also, should i use wizard to create tabstrip?
please advise. thanks
SELECTION-SCREEN BEGIN OF SCREEN 2000 AS SUBSCREEN.        SELECTION-SCREEN BEGIN OF BLOCK x WITH FRAME TITLE text-001.
SELECT-OPTIONS: para1 FOR field1 ,
                              para2 FOR field2.
SELECTION-SCREEN END OF BLOCK x.
SELECTION-SCREEN END OF SCREEN 2000.
SELECTION-SCREEN BEGIN OF SCREEN 3000 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK y WITH FRAME TITLE text-002.
SELECT-OPTIONS: para3 FOR field3 ,
                              para4 FOR field4.
SELECTION-SCREEN END OF BLOCK y.
SELECTION-SCREEN:SKIP.
SELECTION-SCREEN END OF SCREEN 3000.

e_l,
See the total doc.. with example.
Assigning a Subscreen Area to a Tab Title
You must assign a subscreen area to each tab title. There are two ways of doing this:
Paging in the SAPgui
You need to assign a separate subscreen area to each tab title, and define the function codes of the tab titles with type P (local GUI function). In the screen flow logic, you call all the subscreens in the PBO event. This means that all of the tab pages reside locally on the SAPgui.
When the user chooses a tab title, paging takes place within the SAPgui. In this respect, the tabstrip control behaves like a single screen. In particular, the PAI event is not triggered when the user chooses a tab title, and no data is transported. While this improves the performance of your tabstrip control, it also has the negative effect that when the user does trigger the PAI event, all of the input checks for all of the subscreens are performed. This means that when the user is working on one tab page, the input checks may jump to an unfilled mandatory field on another page.
Local paging at the SAPgui is therefore most appropriate for screens that display data rather than for input screens.
Paging on the Application Server
One subscreen area is shared by all tab titles and called in the PBO event. You define the function codes of the individual tab titles without a special function type. When the user chooses a tab page, the PAI event is triggered, and you must include a module in your flow logic that activates the appropriate tab page and assigns the correct subscreen to the subscreen area.
Since the PAI event is triggered each time the user chooses a tab title, this method is less economical for the application server, but the input checks that are performed only affect the current tab page.
Procedure in Either Case
You create the subscreen areas within the tabstrip area. You assign the subscreen areas to one or more tab titles in the Screen Painter by selecting one or more titles. You can also assign a subscreen area to a tab title in the tab title attributes by entering the name of the subscreen area in the Reference field attribute.
The procedure for the alphanumeric Screen Painter is described under Creating Tabstrip Controls.
If you are paging at the SAPgui, create a subscreen area for each tab title. If you are paging at the application server, select all tab titles and create a single subscreen area. The subscreen areas may not cover the top line of the tab area. However, within a tab area, more than one subscreen area can overlap.
Programming the Flow Logic
In the flow logic, all you have to do by hand is include the correct subscreens. The screen flow and data transport to the ABAP program is the same as for normal subscreens. There are two ways of programming the screen flow logic, depending on how you have decided to page through the tabstrip control.
Paging in the SAPgui
When you page in the SAPgui, you must include a subscreen for each subscreen area:
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN: <area1> INCLUDING [<prog 1>] <dynp 1>,
                  <area2> INCLUDING [<prog 2>] <dynp 2>,
                  <area3> INCLUDING [<prog 3>] <dynp 3>,
PROCESS AFTER INPUT.
CALL SUBSCREEN: <area1>,
                  <area2>,
                  <area3>,
Paging on the Application Server
When you page on the application server, you only have to include a subscreen for the one subscreen area:
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN <area> INCLUDING [<prog>] <dynp>.
PROCESS AFTER INPUT.
CALL SUBSCREEN <area>.
Handling in the ABAP Program
Before you can use a tabstrip control in your ABAP program, you must create a control for each control in the declaration part of your program using the following statement:
CONTROLS <ctrl> TYPE TABSTRIP.
where <ctrl> is the name of the tabstrip area on a screen in the ABAP program. The control allows the ABAP program to work with the tabstrip control. The statement declares a structure with the name <ctrl> . The only component of this structure that you need in your program is called ACTIVETAB.
Use in the PBO event
Before the screen is displayed, you use the control to set the tab page that is currently active. To do this, assign the function code of the corresponding tab title to the component ACTIVETAB:
<ctrl>-ACTIVETAB = <fcode>.
When you page at the SAPgui, you only need to do this once before the screen is displayed. This initializes the tabstrip control. The default active tab page is the first page. After this, the page activated when the user chooses a tab title is set within SAPgui.
When you page on the application server, you must assign the active page both before the screen is displayed for the first time, and each time the user pages. At the same time, you must set the required subscreen screen.
You can suppress a tab page dynamically by setting the ACTIVE field of table SCREEN to 0 for the corresponding tab title.
Use in the PAI event
In the PAI event, ACTIVETAB contains the function code of the last active tab title on the screen.
When you page in the SAPgui, this allows you to find out the page that the user can currently see. When you page at the application server, the active tab page is controlled by the ABAP program anyway.
The OK_CODE field behaves differently according to the paging method:
Paging in the SAPgui
When you page in the SAPgui, the PAI event is not triggered when the user chooses a tab title, and the OK_CODE field is not filled. The OK_CODE field is only filled by user actions in the GUI status or when the user chooses a pushbutton either outside the tabstrip control or on one of the subscreens.
Paging on the application server
If you are paging at the application server, the PAI event is triggered when the user chooses a tab title, and the OK_CODE field is filled with the corresponding function code.
To page through the tabstrip control, you must assign the function code to the ACTIVETAB component of the control:
<ctrl>-ACTIVETAB = <ok_code>.
This statement overwrites the function code of the last active tab page with that of the new tab title. At the same time, you must ensure that the correct subscreen is inserted in the subscreen area.
Otherwise, tabstrip controls are handled like normal subscrens in ABAP programs, that is, the ABAP program of a subscreen screen must contain the dialog modules called from the flow logic of the subscreen.
Examples
Tabstrip control, paging at SAPgui
REPORT DEMO_DYNPRO_TABSTRIP_LOCAL.
CONTROLS MYTABSTRIP TYPE TABSTRIP.
DATA: OK_CODE TYPE SY-UCOMM,
      SAVE_OK TYPE SY-UCOMM.
MYTABSTRIP-ACTIVETAB = 'PUSH2'.
CALL SCREEN 100.
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE USER_COMMAND INPUT.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
IF SAVE_OK = 'OK'.
    MESSAGE I888(SABAPDOCU) WITH 'MYTABSTRIP-ACTIVETAB ='
                                  MYTABSTRIP-ACTIVETAB.
ENDIF.
ENDMODULE.
The next screen (statically defined) for screen 100 is itself. It has the following layout:
The screen contains a tabstrip area called MYTABSTRIP with three tab titles PUSH1, PUSH2 and PUSH3. The function codes have the same name, and all have the function type P. One of the subscreen areas SUB1 to SUB3 is assigned to each tab title. The pushbutton has the name BUTTON and the function code OK.
In the same ABAP program, there are three subscreen screens 110 to 130. Each of these fits the subscreen area exactly. The layout is:
The screen flow logic for screen 100 is as follows:
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
CALL SUBSCREEN: SUB1 INCLUDING SY-REPID '0110',
                  SUB2 INCLUDING SY-REPID '0120',
                  SUB3 INCLUDING SY-REPID '0130'.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
CALL SUBSCREEN: SUB1,
                  SUB2,
                  SUB3.
MODULE USER_COMMAND.
The screen flow logic of subscreens 110 to 130 does not contain any module calls.
When you run the program, a screen appears on which the second tab page is active, since the program sets the ACTIVETAB component of the structure MYTABSTRIP to PUSH2 before the screen is displayed. The user can page through the tabstrip control without the PAI event being triggered. One of the three subscreens is included on each tab page.
When the user chooses Continue, the PAI event is triggered, and an information message displays the function code of the tab title of the page that is currently active.
Tabstrip control with paging on the application server.
REPORT DEMO_DYNPRO_TABSTRIP_LOCAL.
CONTROLS MYTABSTRIP TYPE TABSTRIP.
DATA: OK_CODE TYPE SY-UCOMM,
      SAVE_OK TYPE SY-UCOMM.
DATA NUMBER TYPE SY-DYNNR.
MYTABSTRIP-ACTIVETAB = 'PUSH2'.
NUMBER = '0120'.
CALL SCREEN 100.
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE USER_COMMAND INPUT.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
IF SAVE_OK = 'OK'.
    MESSAGE I888(SABAPDOCU) WITH 'MYTABSTRIP-ACTIVETAB ='
                                  MYTABSTRIP-ACTIVETAB.
ELSE.
    MYTABSTRIP-ACTIVETAB = SAVE_OK.
    CASE SAVE_OK.
      WHEN 'PUSH1'.
        NUMBER = '0110'.
      WHEN 'PUSH2'.
        NUMBER = '0120'.
      WHEN 'PUSH3'.
        NUMBER = '0130'.
    ENDCASE.
ENDIF.
ENDMODULE.
The statically-defined next screen for screen 100 is itself, and its layout is the same as in the above example. However, the function codes of the three tab titles have the function type <blank> and they all share a single subscreen area SUB.
The same subscreen screens 110 to 130 are defined as in the last example.
The screen flow logic for screen 100 is as follows:
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
CALL SUBSCREEN SUB INCLUDING SY-REPID NUMBER.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
CALL SUBSCREEN SUB.
MODULE USER_COMMAND.
In this example, the program includes a subscreen screen in the subscreen area SUB dynamically during the PBO event.
The screen flow logic of subscreens 110 to 130 does not contain any module calls.
This example has the same function as the previous example, but the paging within the tabstrip control is implemented on the application server. Each time the user chooses a tab title, the function code from the OK_CODE field is assigned to the ACTIVETAB component of structure MYTABSTRIP. At the same time, the variable NUMBER is filled with the screen number of the subscreen that has to be displayed in the subscreen area SUB of the tabstrip control
Pls. reward if useful

Horizontal black/dotted lines on Apple Studio Display

As of about six hours ago, my screen is suddenly showing several horizontal 1px thick lines at the top of the screen; they are usually black but sometimes change to alternating black and white dotted line when a window is moved around in the area they're covering. They were not there this morning when I used the computer, they just showed up without warning. I've restarted the system to no avail; any suggestions on next steps or ideas of what might be going on here?

Hi bogisan
To clarify, I mentioned in my original post that I'd tested with DV and got the same problem...
dewshi wrote:
Actually, it shows the same issue displaying DV-PAL!
Although I'm working with ProRes, I have already experimented with playing out DV on a DV timeline, which should be less demanding than ProRes, as you're suggesting.
It doesn't look to me like the familiar cheese-grater artefact associated with interlacing issue as there's only one break in the image, rather than mismatching alternative lines when there is horizontal motion. I've tried different sequence settings for the field order, with no difference.
I'm wondering if the display is out of sync? It literally looks like the screen has been sliced by a razor 1/3 of the way down, and the bottom part is a different frame to the top. It happens when I scrub through the timeline too, but stabilises once parked on single frame.
By the way, I've also checked that the MBP has switched to the NVIDIA card rather than the slower, less energy consuming Intel video card.
Will check out the MBP forum too...
Thanks

Horizontal Blue/White lines

I have read lots about Vertical lines on G5s but little about my newly discovered problem
I have a G5 fully updated 10.5.6- 1.9 GHz 1.5 GB mem. Horizontal Blue/White lines have appeared in columns about 25mm wide, all over the screen.
As I type they seem to go all fuzzy and change to a darker blue - I find this very distracting but so far I am able to use my machine with not too much difficulty, except that the fault doesn't help when I need to use my Photoshop software, inasmuch that the blue/white lines seem to dominate the background of the photos.
Has anyone got any ideas?
wtr

Same problem, different orientation.
This happens if your inverter cable gets damaged, or your inverter board gets shorted. Take it in for service.

Screen lines

hi I'm getting random screen lines when opening applications on my iMac , there not there all the time
Any ideas

If I look at my phone under light at certain angles, there appear to be vertical and horizontal lines. I know they are supposed to be there because they are very straight and evenly spaced.
And you just changed your point completely and what the iPhone is supposed to do. Before you said that it wasn't on yours, so it wasn't on his. Then you said that flaws were unimportant, when a flaw actually makes it not perfect. And now you think the iPhone just has to make calls and connect to wifi. The phone is actually supposed to do a lot more. Here is a link with what the iPhone does: http://www.apple.com/iphone/features/ If it doesn't perform one of these properly, then they received a faulty phone. This is a lot more than just making calls or connecting to wifi. Also, there could be a problem with how the phone was made, causing the lines at certain angles. An example would be the glue on the phones. This was because the phone was sent out early, causing it not to be fully dry. You may say that it then went away, but wet glue on a phone being used would cause the glass to move and could hurt it in the future

Single/ Consolidated GR/IR entry for a PO having multiple line items

Hi,
In a PO there are couple of line items for materials of similar type and class. While making the Goods Receipt, the Accounting Document is making two no of line items for GR/IR accounts as credit and two no of inventory accounts as debit. Same is happening to GR/IR account while making Invoice Receipt document also.
Informatively, both the materials above have been assigned to one GR/IR account in the OBYC table.
My question is, is it possible to consolidate the value of both these materials and post one line item for GR/IR account. This is required as in our case in a PO, normally, we do have multiple line items and hence it is resulting multiple no of GR/IR and inventory accounts in a single accounting document. As we are getting details of the line item from PO history, we do not require it in the accounting document.
Requested to kindly help.
Regards
B.Mohanty

Hi
This is not possible (you will compleet los the link between the Invoice and GR)
The reason is that when you receive an invoice that this is based on a G/R line and the way arround when you receive first the invoice(s).
The system need this for the automatecly clearing from the G/R - I/R account, that is based on PO an PO line item number.

My Built-in Webcam has my image in a horizontal split screen!

My Built-in Webcam has my image in a horizontal split screen. How can I fix this???

Let me explain more - when I use skype for example, my image is displayed in a horizontal split screen. I have tried another chat product and the same thing happens - so it must be something to do with the built in camera or configuration of the camera. Would it be best to contact Apple about this? Will somebody have to get a spanner out to fix my quite new macbook pro? (3 months old). I teach languages online so I really depend on a decent image. Can anybody help me?

!!!How to restrict user for making changes in Sales order , partner level

Hi all,
Can anybody tell me how to restrict user for making changes in Sales order at partner level, is it through user exit?

Hi Ruchi
I hope u had gone to the screen fields which u want them not to be editable. So there u select all the fields contents which u do not want to to be changed and check the boxes with W.content and Display and save it. Once evrything is done u have to activate the particular transcation going in to the standard variants and put the name and click the activate button.
Hope its clear
Reward if help ful
Sri

In need of more vocal effects for garageband

I'm pretty new to garageband and love the software and the community of folks helping one another.. Thanks to all ahead of time for your assistance.
I was just wondering if there are any programs or locations online to download voice effects for garageband? I've looked and have found a few spam sites and a few sites with software but no faq's or any real explanantion of their product. So i'm asking you folks for direction with this one since one of you might've gone through this before.
Thanks again for your help.

look at these web sites.
http://www.mda-vst.com/
mda-vst has a series of AU you can use on your voice.
Detune is nice. Detune - Simple up/down pitch shifting thickener
Leslie is nice. Leslie - Rotary speaker simulator
I use them alone or in combination. Try their different presets or make your own extremes.
Forget about the Talkbox AU. It doesnt seem to work in GB but might in logic.
KTGranulator is a free delay line granulator.
http://www.koen.smartelectronix.com/KTGranulator/
It has many presets. Use your mic and talk or sing into each preset to see what you like. It comes with 40 presets.
Presets 6&7 will give you a metallic sound called metallic 01 & 02.
Preset 16 is called "Android". Try them all you never know. Try combining them with "Detune" or "Leslie"!
Monstachorus is fun. Try the presets or experiment with new ones.
http://www.macmusic.org/software/view.php/lang/en/id/3098/
These are just a few examples. Best thing to do if your looking for unusual ways to change your voice is to try them in every AU you can get a hold of. You just never know what you'll come up with.
also try the tremolo and phaser that come with GB, or even the drum and guitar effects. I like to use guitar effects for distorted voice effects.

Need help on achieving this effect for a Photo Wall

I was wondering if anyone could point me in the right direction on achieving the effect of the photo wall in the site listed below? I think I understand that each of the "tv" screens is it's own individual video file, so I understand that part, but the part I am really stumped on is how it randomizes the video files to different locations and continues to do so. Is there a link, component, or anything that someone could point me to? Thank you in advance for your helpful information.
Here is the link:
http://abcweb.it/
Kenny

It is unlikely any of those are video files, though there may be a simple movieclip that acts as a preloader giving the effect of a static tv screen. It appears to just be something randomly loading images into a pattern of containers, which can be achieved by shuffling an array that holds the image file names. There is a non-random element in the placement of the text, where each word changes between only two positions.
As for tutorials regarding the panels, you should search Google using terms like "AS3 3D wall" and see if anyone has prepared one for it.

Effect for making horizontal TV screen lines

Similar Messages

Maybe you are looking for