Effect of a Breakdown task on the same preventive task scheduling?

Dear All
I defined a maintenance plan with strategy for 10 same equipments.Task of Changing one spar part are running every month but after 3.5 month a breackdown order happened for one of this equipment so we changed this spare part at the mid of the month .Now how can I apply the effect of this breakdown on last actual date of the task in the scheduling (just for this equipment).
I think call date of the task should be with 15 days delay in the next scheduling for just this equipment but actually I do not know that how acn I handle it.
Kindly provide me with such details.
regards

Hi,
Refer this [Article1|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a3461636-0301-0010-3787-978f5ac8bd45] [Article2|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a9df9590-0201-0010-0bae-fea7edc2ffd9#q1].
Regards,
Surjith

Similar Messages

PPro CS6: Effects used on Adjustment Layer not the same as direct on clip

Hi,
I'm using the PPro CS6 Demo on a Core i7 with 12GB Ram, GTX 580 1,5GB on Windows 7 Ultimate.
Today i applied the gaussian blur filter to some clips to remove the moiré pattern in the downscaled videoclips - as I do it quite often with PPro CS5. It removed the pattern as it's always doing - fine.
Then I remembered the new Adjustment Layer function within CS6 and tried this in the same sequence, with the same clips and the same configured gaussian blur filter. The moiré pattern slightly improved, but the effect wasn't the same as before. It seems that applying this filter on a clip or on an Adjustment Layer isn't the same?
I didn't tested this with other filters, so I can't say if the gaussian blur is the only filter affected.
Anyone has a similiar experience or can explain this?
Thanks!

There is a very common misstatement and misunderstanding of how adjustment layers work, which I'll repeat here: "Applying an effect to an adjustment layer applies the effect to all layers under the adjustment layer."
That's wrong in a subtle but important way.
What actually happens is that applying an effect to an adjustment layer applies the effect to the composited result from all of the layers under the adjustment layer.
This is an important distinction, because it puts the adjustment at a different place in the order of operations in the rendering pipeline.
Anyway, that's a long and perhaps overly theoretical way of saying that, yes, you may see some difference between applying an effect directly to a bunch of clips compared with applying the effect to an adjustment layer over that same bunch of clips.

Two effects concurrently? all together. at the same time?

So- I'm trying to have three effects happen at once. quick Fade in- outline float - then slow fade out.
the fade in is the only thing that looks how i want it to. it fades in evenly all at once. The fade out fades from screen left to screen right. is that because I have it as a long-long slow fade? Can I make it fade all at once instead of left to right?
I'm having the text fade and after a few seconds of fadeing the outline float kicks in. so both efects are supposed to happen at the same time. am i asking too much?
I made the outline white, so I should be able to see it flow upwards. thats not the case when I import to fcp. but i do see it happen in the canvas window in live type. Is there something else I need to do in order to see this effect?

DaNam and Bogie offer solid advice.
And it's the cancel out message from Bogie that doesn't allow you to have the white outline float up.
To achieve that you need to select your text in the timeline.
In the Inspector click on the Style Tab then Outline and click the Enable box. Then change the color to white and this will allow your outline to be white in both LT and FCP.
Good luck

Resizing/stretching without effecting angles of other points in the same path?

Hi all,
I am wanting to increase the size of say a round edged box that I just created with the round edge rectangle tool.
Now when I create the path initially the rounded edges are at perfect 90degree cuts. But say I wanted to increase the size of the path say by doubling its height, how I do that and still maintain the perfect 90degree corners I started with?
Any help would be great

The only way I know to do this is to either make the rectangle over or to use the Effect>Convert To Shape>Round Rectangle

After Effects Cs6 Render continuously fails at the same Frame?!

So I was editing a Call Of Duty episode that I've been working on for a week... Once I got it finished I rendered it out and about half way through the render fails every single time! I've read others like these and I know I have enough RAM, but the wierd thing about it is that every single time I don't get an error message... Just "Render Failed." Every single time at about 47 seconds. Please help I have a guy waiting on it and it was my best so far anyways, if any of you know the solution to this I'd be very happy.

You have provided us with no information to figure out your problem. What version of CS6 are you running? 11.0.0? 11.0.1? 11.0.2? What OS? What are your system specs? What's in your comp? What effects have you used? Have you installed any third-party plugins? Have you installed any third-party codecs?
And, most importantly, WHAT IS IN YOUR COMP AT 47-SECONDS IN?

I paid for the single aftects cc app and I used the same account with the expired free trial . so after paying for after effects, i try downloading it but it brings up a screen saying that i need to purchase after effects to continue

i paid for the single after effects cc app and I used the same account with the expired free trial . so after paying for after effects, i try downloading it but it brings up a screen saying that i need to purchase after effects to continu

Activation Stuff
Mylenium

Filter Effect and Layer Style in the same layer vs separate layers

I'm adjusting a photographic image and am using both a filter effect and a layer style in the same layer on a Smart Object. I want to separate the two effects into two layers, so one layer has the filter effect (Nik) and one layer has the layer style (Color Overlay) (with the goal of merging/rasterizing the Nik filter effect with the Smart Object but keeping the layer style unmerged). I can make two layers and move one effect without problem, but the visual result of each effect on a separate layer is quite different from having both effects in the same layer. The Blend Mode for all my layers is Normal. Within the Color Overlay panel, the blend mode is Linear Burn.
I don't understand why the visual result is different. I'm not an advanced user of Photoshop, so maybe I'm missing something. This is a trial of CS6 that I'm using.
Layer 1: a layer style and a filter effect, stacked
looks very different from....
Layer 2: a layer style
Layer 1: a filter effect

If you want two separate layers, then on the duplicate layer with the Color Overlay layer style you might try different layer blending modes.
For example, below looks the same having the Color Overlay with linear burn on the second layer and changing the layers blend mode to Hue.
You could also put the layer in a group and apply the layer style to the group.
(i deleted the previous post because of pilot error)
Message was edited by: R_Kelly

Keep the Ken Burns effect the same?

Hi all,
I'm a new Mac and iPhoto user. When I set the auto Ken Burns effect for a slideshow in iPhoto, it changes how it zooms/pans each time I play it. Is there a way to use the auto feature so that it stays the same each time you view it?
Brian

Brian:
Are you setting the KB effect manually? To keep it the same play after play you have to uncheck the KB effect in the Settings pane and then check the KB checkbox for each slide and set the start and finish view. That way they will be remembered for each subsequent play.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Placing the same object multiple times

Does anyone know how to place an object multiple times in either Illustrator or InDesign? I have a small graphic that I would like to have repeated (probably hundreds of times) to create a background. I could place it over and over (and over and over and over), but that would be way too labor intensive.
Is there a way to put it in like it is a self-replicating background?
Thanks,
John

A Symbol, by definition, is stored only once in the file. A Symbol Instance is just a reference. When an Instance is duplicated, only a reference is duplicated.
Evidently Transform Effect--albeit "live"--does not do the same. It actually does create multiple duplicates of the original. The duplicates are "linked" to the original so that if the original changes, the effect is reapplied on-the-fly in response--but it is applied (and the copies made) all the same. Copies of a Symbol Instance, however, are in and of themselves nothing but position/scale references to the original. So Transform Effect is replicating just those references.
I don't really find this surprising. Consider other so-called "live" effects. When you add multiple strokes and fills to a path, you are not just adding position/size references to the path; the added strokes and fills are, in fact, being created--regardless of the fact that they are recreated on-the-fly if you modify the path.
Same way with Pattern fills. The pattern is actually stepped-and-repeated enough times to fill the clipping path to which it is applied. If you reshape or resize the clipping path, the Pattern Fill gets re-built on-the-fly. But it still gets built all the same.
Apply a live Drop Shadow Effect. That raster image acutally gets created. Change the object to which it is applied, or change the parameters (like resolution) of the shadow, and the raster gets deleted and a new one gets created on-the-fly. But it still gets created, and exists in the file until and unless it is changed.
I think of "Expanding" a live effect as nothing more than breaking the "link" between all the extra created stuff (which is there) and the object to which it was applied. I don't think of all that extra stuff as "not existing yet." It exists. It's been drawn. You're just not allowed to manipulate it directly, because it is "linked" to the original so that it will be deleted and re-created if you edit the original. Breaking the link (Expanding) doesn't take long, becaues all that stuff is already created; it's not just a string of concise commands waiting to be created. It's already there. But make an edit to the original and it does take a long time to re-draw, because all the extra stuff now has to be re-created.
Do a Transform Effect on a Symbol Instance. Expand the result. You'll see that what you have is a group of Symbol Instances. And Symbol Instances are just references--commands to "put a copy of that here."
Use a Symbol Instance in some other construct, like for example, a Pattern Fill. Expand the Pattern Fill and you'll not end up with a group of Symbol Instances; you'll end up with a bunch of actual copies of the artwork which the Symbol contains.
Same with a Scatter Brush. Now, I can understand a Symbol not working with a Pattern Brush or Art Brush because of the enveloping that has to go on. But all a Scatter Brush does is position/scale/rotate copies. So I would expect a Symbol Instance used in a Scatter Brush to create Symbol Instances. But it doesn't. Try it. Draw a red circle. Make it a Symbol. Use the Symbol Instance to define a Scatter Brush. Draw a path and apply the Brush. Now doubleClick the original Instance still on the page to put it in Isolation Mode. Change its fill to green. Exit Isolation Mode. The circles on the Brush Path do not update. They are actual copies of artwork, not Symbol Instances. Who knows why? Perhaps it would break other features/behaviors of Scatter Brushes I never use (Wacom tilt?). Or maybe they could have made it work with Symbols, but just didn't. Didn't AI Brushes exist before Symbols? Illustrator's history is full of later features not being well integrated into the pre-existing feature set (ex: LivePaint and Brushes).
JET

Synchronize input and output tasks to start at the same sample point [C++ NI_DAQmx Base]

I'm trying to initiate the analog input and output streams to start reliably at the same sample. I've tried triggering the output from the start of the input using the following code [NI-DAQmx Base 2.1 under Mac OS X with an M-Series multifunction board]. It compiles and runs, but gives an error message at the call to "DAQmxBaseCfgDigEdgeStartTrig". Any suggestions about synchronized I/O on this platform?
#include "NIDAQmxBase.h"
#include
#include
#include
#define DAQmxErrorCheck( functionCall ) { if ( DAQmxFailed( error=( functionCall ) ) ) { goto Error; } }
int main( int argc, char *argv[] )
// Task parameters
int32 error = 0;
TaskHandle inputTaskHandle = 0;
TaskHandle outputTaskHandle = 0;
char errorString[ 2048 ] = {'\0'};
int32 i;
time_t startTime;
// input channel parameters
char inputChannelList[] = "Dev1/ai0, Dev1/ai1";
float64 inputVoltageRangeMinimum = -10.0;
float64 inputVoltageRangeMaximum = 10.0;
// output channel parameters
char outputChannelList[] = "Dev1/ao0, Dev1/ao1";
char outputTrigger[] = "Dev1/ai/StartTrigger";
float64 outputVoltageRangeMinimum = -10.0;
float64 outputVoltageRangeMaximum = 10.0;
// Timing parameters
char clockSource[] = "OnboardClock";
uInt64 samplesPerChannel = 100000;
float64 sampleRate = 10000.0;
// Input data parameters
static const uInt32 inputBufferSize = 100;
int16 inputData[ inputBufferSize * 2 ];
int32 pointsToRead = inputBufferSize;
int32 pointsRead;
float64 timeout = 10.0;
int32 totalRead = 0;
// Output data parameters
static const uInt32 outputBufferSize = 1000;
float64 outputData[ outputBufferSize * 2 ];
int32 pointsToWrite = outputBufferSize;
int32 pointsWritten;
for( int i = 0; i < outputBufferSize; i++ )
outputData[ 2 * i ] = 9.95 * sin( 2.0 * 3.14159 * i / outputBufferSize );
outputData[ 2 * i + 1 ] = -9.95 * sin( 2.0 * 3.14159 * i / outputBufferSize );
// ------------------- configure input task -----------------------
DAQmxErrorCheck ( DAQmxBaseCreateTask( "", &inputTaskHandle ) );
printf( "Created input task\n" );
DAQmxErrorCheck ( DAQmxBaseCreateAIVoltageChan( inputTaskHandle, inputChannelList, "", DAQmx_Val_RSE, inputVoltageRangeMinimum, inputVoltageRangeMaximum, DAQmx_Val_Volts, NULL ) );
printf( "Created AI Voltage Chan\n" );
DAQmxErrorCheck ( DAQmxBaseCfgSampClkTiming( inputTaskHandle, clockSource, sampleRate, DAQmx_Val_Rising, DAQmx_Val_ContSamps, samplesPerChannel ) );
printf( "Set sample rate\n" );
// ------------------- configure output task -----------------------
DAQmxErrorCheck ( DAQmxBaseCreateTask( "", &outputTaskHandle ) );
printf( "Created output task\n" );
DAQmxErrorCheck ( DAQmxBaseCreateAOVoltageChan( outputTaskHandle, outputChannelList, "", outputVoltageRangeMinimum, outputVoltageRangeMaximum, DAQmx_Val_Volts, NULL ) );
printf( "Created AO Voltage Chan OK\n" );
DAQmxErrorCheck ( DAQmxBaseCfgSampClkTiming( outputTaskHandle, clockSource, sampleRate, DAQmx_Val_Rising, DAQmx_Val_ContSamps, samplesPerChannel ) );
printf( "Set sample rate\n" );
// trigger output when input starts
DAQmxErrorCheck ( DAQmxBaseCfgDigEdgeStartTrig( outputTaskHandle, outputTrigger, DAQmx_Val_Rising ) );
printf( "Set output trigger\n" );
// ------------------- configuration -----------------------
// write output signal
DAQmxErrorCheck ( DAQmxBaseWriteAnalogF64( outputTaskHandle, pointsToWrite, 0, timeout, DAQmx_Val_GroupByScanNumber, outputData, &pointsWritten, NULL ) );
printf( "Write output signal\n" );
// set up input buffer
DAQmxErrorCheck ( DAQmxBaseCfgInputBuffer( inputTaskHandle, 200000 ) ); // use a 100,000 sample DMA buffer
// initiate acquisition - must start output task first
DAQmxErrorCheck ( DAQmxBaseStartTask( outputTaskHandle ) );
DAQmxErrorCheck ( DAQmxBaseStartTask( inputTaskHandle ) );
// The loop will quit after 10 seconds
Dr John Clements
Lead Programmer
AxoGraph Scientific

Hi Michael,
First of all, thanks very much for taking the time to investigate this problem! Much appreciated.
You asked for "an actual error code you got and any description that is given". The full output from the program that I posted earlier in this thread is appended to the end of this message. In summary, following the call to...
DAQmxErrorCheck ( DAQmxBaseCfgDigEdgeStartTrig( outputTaskHandle, outputTrigger, DAQmx_Val_Rising ) );
... with ...
char outputTrigger[] = "Dev1/ai/StartTrigger";
...the error message is ...
DAQmxBase Error: Specified route cannot be satisfied, because the hardware does not support it.
You asked "specifically which M series device you are using"? It is the PCIe 6251 (with BNC 2111 connector block). I'm testing and developing on an Intel Mac Pro (dual boot OS X and Windows XP).
You asked for "the location you pulled the code from". Here it is...
http://zone.ni.com/devzone/cda/epd/p/id/879
...specifically from the file "Multi-Function-Synch AI-AO_Fn.c".
I adapted the NI-DAQmx calls to their NI-DAQmx Base equivalents.
Finally, you asked "Is the trigger necessary, or do you just need to know that the measurements are running on the same clock?". I believe that some kind of sychronized trigger is necessary in my situation (correct me if I'm wrong). Timing is crucial. Say I initiate an analog output stream that delivers a voltage command step 5 ms from the onset. I need to record the response (analog input stream) so that its onset is accurately aligned (synchronized) at 5 ms. A typical recording situation would stimulate and record a short data 'sweep', then wait for the (biological) system to recover, then stimulate and record another short sweep, and repeat. I need all the recorded sweeps to align accurately so that they can be averaged and analyzed conveniently.
I definitely do not want my customers to rely on an expensive external TTL pulse generator to initiate and synchronize each 'sweep'. That would effectively eliminate the cost advantage of an NI board, as well as adding unnecessary complexity in setup and use. It would be a show-stopper for me.
It seems perverse, but would it be possible to use a digital output channel connected directly to a digital input chanel to trigger the input and output streams?
Regards,
John.
Full output from test program. Compiled with gcc 4 under OS X...
[Session started at 2007-05-23 14:17:01 +1000.]
LoadRuntime: MainBundle
CFBundle 0x303cc0 (executable, loaded)
_CompatibleWithLabVIEWVersion: linkedAgainst: 08208002
_CompatibleWithLabVIEWVersion: result= false, mgErr= 1, theActualVersion= 00000000
_CompatibleWithLabVIEWVersion: linkedAgainst: deadbeef
_CompatibleWithLabVIEWVersion: Reseting Linked Against
_CompatibleWithLabVIEWVersion: linkedAgainst: 08208002
_CompatibleWithLabVIEWVersion: result= true, mgErr= 0, theActualVersion= 00000000
_CompatibleWithLabVIEWVersion: linkedAgainst: 08208002
_CompatibleWithLabVIEWVersion: result= true, mgErr= 0, theActualVersion= 00000000
com.ni.LabVIEW.dll.nidaqmxbaselv
CFBundle 0x313760 (framework, loaded)
{type = 15, string = file://localhost/Library/Frameworks/nidaqmxbaselv.framework/, base = (null)}
Amethyst:Library:Frameworks:nidaqmxbaselv.framework
2007-05-23 14:17:02.248 test-ni[4445] CFLog (21): Error loading /Library/Frameworks/LabVIEW 8.2 Runtime.framework/resource/nitaglv.framework/nitaglv: error code 4, error number 0 (no suitable image found. Did find:
/Library/Frameworks/LabVIEW 8.2 Runtime.framework/resource/nitaglv.framework/nitaglv: mach-o, but wrong architecture)
CFBundle 0x1751fdc0 (framework, not loaded)
Created input task
Created AI Voltage Chan
Set sample rate
Created output task
Created AO Voltage Chan OK
Set sample rate
DAQmxBase Error: Specified route cannot be satisfied, because the hardware does not support it.
test-ni has exited with status 0.
Dr John Clements
Lead Programmer
AxoGraph Scientific

How to place multiple images in batch with drop shadow effects on room backgrounds at the same position?

I want to place multiple images of hand paintings with drop shadow effects on room backgrounds to make them look as if the paintings are hanged on the room walls. I know how to do it one by one, but that takes time and I want to do it in batch at once.
I am quite a beginner for adobe photoshop CS6. I belive such an automated task is possible through 'Automated Batch' function and/or 'Create Droplet' function. Kindly share your expert opinion.

If you want to go with Batch I would recommend creating an Action of more or less these steps:
• set the resolution to the same as the background image’s
• change the image from Background Layer to regular Layer if necessary
• convert it to a Smart Object
• add a Drop Shadow Layer Style to the image (do not use Global Angle)
• place the background image (File > Place …)
• move it behind the image layer
• Image > Reveal All
• make Selection from that layer’s transparency (cmd-click its icon in the Layers Panel) and use Image > Crop
• select and transform the image layer to fit the intended position
This would naturally work out best if the images had the same size and proportions.
For the reflection on the floor duplicate the image, flip it vertically, move it in position and reduce its opacity to maybe 10%.
Realistically you may have to hide it partially behind the pillows, a Vector Mask would be an option.

How can I move a task from a Summary Task to another Summary Task in the same task list?

Hey, I tried to move tasks through the SP UI from one Summary Task to other in the same task list, but I didn't find possibility for it.
Then I spent time to learn the SP Client Object Model and now I can read tasks form the list. I see every task has a "FileRef" and a "FileDirRef" field. If I think right these fields show the relation between list elements for example between
a Task and a Summary Task elements.
I changed these fields' values and I tried to Update the ListItem but I got this error message: "Invalid data has been used to update the list item. The field you are trying to update may be read only."
I really need to move tasks what were created below a wrong Summary Task so please explain a method or pattern how I can do this. (I can create a new Task below to any Summary Task and I can set field values but I hope there is a way to really move tasks (I
mean I should change the right field values somehow.).
I can reach the Task List both on the server and client side so I'm very interested in every solution. PowerShell solution is also good for me.
I'm using SharePoint 2010 SP2.
Thank you for your answer and your time. :)
Csaba Marosi

Hi,
According to your post, my understanding is that you want to move a task from one summary task to another in the same task list.
We can do it like this:
We can create a Gantt View for this task list, then copy your tasks inside a summary task, then navigate back to the other summary and paste, then go back to original and delete.
Here is another way for your reference:
SharePoint vs Powershell – Moving List Items between folders
http://sharepointstruggle.blogspot.in/2010/07/sharepoint-vs-powershell-moving-list.html
Best Regards
Dennis Guo
TechNet Community Support

How to use two different boot images in the same task sequence

I have a need to use Two boot images in the same task sequence. The reason is I'm deploying ZTI to McAfee encrypted devices which I have already done with McAfee v6 Encryption successfully.
Here's where my problem comes in. We are about to deploy McAfee v7 which means we will have a mix of v6 and v7 in our environment. I must have two special Boot images one with v6 drivers and one with v7 drivers in order for my process to work. I don't see
a way right now to assign more than one boot image to a task sequence. Is there any way to do this?
If I can't do that then I will have to create two task sequences and target collections based on the Endpoint Encryption version to deploy to.
If anyone has suggestions it would be much appreciated. Thank you

Have you tested copying those files to %windir%\system32\drivers during the WinPE session (just enable commandline support to your boot image) to see if they need to be in there before the OS start? Test that and if they don't need to be there during the
boot up of WinPE then:
Create two packages (v6 and v7)
"Run command line", use the package created earlier and just use "copy /Y .\*.* %windir%\system32\drivers" ...again, this should be run according to your needs, variable or some other check like I said

How can I copy an audio effect from a clip and paste it to another clip in the same timiline...With FCPro 7 it was all so fast........

how can I copy an audio effect from a clip and paste it to another clip in the same timiline...With FCPro 7 it was all so fast........

Tom Wolsky wrote:
The advantage goes to FCP7 if you allow that it can copy and paste filters, audio and video, transformations, and other attributes separately.
You can do that in FCPX too, as all the things you cited are listed separately in the inspector.
Here's a little gotcha. Let's say you've color corrected a few clips and you've applied an effect to one and want to paste it the other clips. You switch off color correction and copy the clip. You select the other clips and paste effects. What do you think happens? The effect is applied, but the color correction is applied as well, only it's switched off as it was in the first clip, so all the color correction on the other clips is lost. Fun, eh?
I'll try to replicate your gotcha - but no, that doesn't sound like fun at all!

How do I get IE 11 to open in the same window on the task bar?

How do I get IE 11 to open in the same spot on my task bar. i.e. IE 11 is on my task bar. When I open it, it opens in a new place on the end of the task bar. Microsoft Outlook, Windows Explorer, Quicken, Adobe, etc,, all on the task bar open
right at there location on the task bar; not in a new place at the end of the task bar.
How do I get IE 11, Windows 7, 64 bit to open at the same place as the IE icon???
Thanks

Hi,
Seems a strange issue, How about un-pin IE from the taskbar, then re-pin it to the taskbar for a test?
If doesn't work, I suggest you turn off IE 11 in "Turn Windows Features on or off", reboot PC, then re-turn on, check the result again.
Regards
Yolanda Zhu
TechNet Community Support

Effect of a Breakdown task on the same preventive task scheduling?

Similar Messages

Maybe you are looking for