Effect of issuing Material directly from Interim Storage BIN?

Dear Experts,
What is effect of issuing(311) material directly from Interim storage BIN without storing to Storage BIN.
Because i am unable to do LB11& LB12 for both GR's(101) and TP(311) as it has directly picked from Interim Storage BIn to do
TP(311).
So please someone explain me the effect of the above Scenario?
Thanks & Regards,
Olet Malla

You can do it but in general you should not allow picking from interim Storage Types. For example you don't want Sales trying to pick materials sat in the PSAs, you don't want Production trying to pick from materials in 916 etc. etc.

Similar Messages

Stop IM posting from interim storage bin

Hi,
We have a WM activated where the Transfer order is created and posted automatically when any material movement is posted.
Now when the stock in WM is already allocated to delivery still its possible to post the IM.
For e.g.
1 peice of material 'ABC' is available in IM and also in warehouse. A outbound delivery is created which has trigered a transfer order. Now the stock is lying in 916 interim storage type.
other user does a transfer posting movement (311 movement) of same material. Since the material is not available in the normal storage type, the transfer order is not created automatically.
Now the stock lies in 921 interim storage type.
I want to avoid such scenario. Is it possible to stop any posting in IM if the stock is not available in the normal storage type?
Regards

Hi Frenchy,
Thanks for your valuable input. This was something new for me.
I checked the settings in OMM8, the 'No stringent FIFO setting' is there for all the Interim storage type.
I think this will not help because when the IM posting is done, since there is no stock in normal storage type, system is not creating a transfer order (as per customization which is to created TO automatically). It only creates a open transfer requirement without finding a source storage bin.
However we have found another way to stop the posting. we have set a availability check rule to the transaction and movement type in IM which check the available stock during the posting and sets a waring/error message.
However this is at IM level.
Is it possible to stop the posting at IM via some setting in WM?
Regards

INterim storage bin to unrestricted stock movemnet

Dear All,
I have a problem in warehouse management
Step 1 After the GR(65000 units) my system will automatically create a TR and TO to the quality inspection .
Step 2 will clear the inspection lot by giving a Usage decision through the T.code QA32 to move the stock from quality to unrestricted stock
step 3 But the stock will not be going to the unrestricted area instead it is going to the intrim storage type 922 TR-Zone.
Step 4 If i see in the LS26 i am able to see the stock for put away as 65000 units and pick quantity as 65000 units and the stock type as quality
So the stock is still in quality, if i see the PO also it is showing that the stock is in quality
How can i move this out of the interim storage bin
I am pretty new to WM kindly advice me how to go about this ,
Regards,
D vasanth

A PCN must have got created. Go to LU04, mtype 321, enter your material. It will display the PCN if any exists.
Select the PCN and create Transfer Order and confirm the TO

Available stock shortfall of & in Interim storage bin message in BAPI_GOODSMVT_CREATE

Hello Abapers,
I have created a Zprogram and used a standard function module BAPI_GOODSMVT_CREATE.
while processing this FM, Iam getting error messages in return table as "Available stock shortfall of & in Interim storage bin".
Please help or suggest.
Regards
Pradeep

Searching on the forum you can find threads about WM/PP interface settings.
(Re: WM Staging - Supply area to Production prder)
Whether WM/PP interface is active it depends on your config and master data as well.
You should check:
- config: SPRO > LE > WM > Interfaces > Define Production
- master data: routing (proper work center is assigned), work center (proper production supply area), material master(FG) (production scheduling profile), control cycle (components)
In standard system storage type 100 is defined as an interim storage type (you can compare it to storage type 902, 914, 916, etc). In control cycles (WM master data; LPK1/LPK2/LPK3) you define for each components which is the production storage type.
In standard system storage type 914 is not used with material staging. 914 s.t. related scenario: GI (261) --> stock removel from normal storage type to interim storage type (914).
100 s.t. related scenario: stock removal from normal s.t. to interim s.t. 100 --> GI (261).

Available stock shortfall of & in interim storage bin

Hi gurus,
I am doing the movement type 261 in MIGO with reference to a reservation.
I am working with Warehouse Management and I want to know why the system is defined in automatic the storage type 100?
When I am doing the movement 261, I know that I have stock in the storage type 007 and I am putting this, but, the system is showing the following error message:
100000000026; Available stock shortfall of 10.000 M2 in interim storage bin
Message no. L9040
Diagnosis
In Customizing, the setting is such that no negative stock is allowed in storage type 100. However, this posting will cause negative stock to exist in storage bin HE01 of storage type 100.
For my storage type 100 I do not have defined any strategy in the customising.
Could you help me with this, please?
Kind regards.
SP

Searching on the forum you can find threads about WM/PP interface settings.
(Re: WM Staging - Supply area to Production prder)
Whether WM/PP interface is active it depends on your config and master data as well.
You should check:
- config: SPRO > LE > WM > Interfaces > Define Production
- master data: routing (proper work center is assigned), work center (proper production supply area), material master(FG) (production scheduling profile), control cycle (components)
In standard system storage type 100 is defined as an interim storage type (you can compare it to storage type 902, 914, 916, etc). In control cycles (WM master data; LPK1/LPK2/LPK3) you define for each components which is the production storage type.
In standard system storage type 914 is not used with material staging. 914 s.t. related scenario: GI (261) --> stock removel from normal storage type to interim storage type (914).
100 s.t. related scenario: stock removal from normal s.t. to interim s.t. 100 --> GI (261).

Generate Interim Storage Bins

Hi,
a SAP standard system in SPRO, Logistics Execution, Warehouse Management, Interfaces, Generate Interim Storage Bins contains any storage bin ?
Best regards

Hi,
Goods transfers in the WM system are processed by means of movement types. In the definition of the
movement types, it is possible to have interim storage bins addressed. you can have these bins generated automatically
Example:
According to the definition of the WM movement type 501 (GR without Purchase order), the material is posted to the material storage bin automatically.
If you do not want to use this option, you have to create the storage bins maually using
WM-Master Data-Storage Bin-Create-Manually
Activities: Generate the interim storage bins for your warehouse numbers
Thanks,
DV

Picking from another storage bin

During picking TO creation the system automatically determines the source storage bin from where the materials should be picked. Lets say the items to be picked are not there and cannot be picked. In this case the operator should be enabled to pick from another storage bin, however the system does not allow this. (This is via mobile data entry and in a bulk SU manages st. type).
Is there a way to allow picking from another storage bin? If not, can the TO be created without any source determination? Even if I switch off picking strategy, the system expects entry of source bin at TO creation.

Hi,
With out a source storage bin , pick TO cannot be created currently. If at all you want a different source bin, you have to cancel the TO, block the current bin and then recreate the TO. That is an exceptional case and should be handled inside the system.
Thanks
Vinod.

Available stock in interim storage bin

Dear all
I Create GR Returns 161 with MIGO, I have message error
"50012541 ; available stock in interim storage bin around 1,000.000 KG below target
Message no. L9040
Diagnosis
In Customizing, the setting is such that no negative stock is allowed in storage type 916. However, this posting will cause negative stock to exist in storage bin 0000000000 of storage type 916. "
Can anyone help me ?
thanks
imron

Dear
I created cutomazing in Spro>Logistic Execution>Warehouse management>Activities>Transfer>Define Movement types :
- Movement Type = 161 (Returns PO)
- Dest                  = 916
- Shipment Type   = A (Stck removal)
- Requirement type =    B Purchase Order
- manual TO creation not allowed
- manual TR creation not allowed
And then I created TO with LT01 using move type 161 and requirement type = B
Now stock in Storage Type 916 was there with qty 1000
But When try again to Create GR (MIGO-161- PO return)
the error still "50012541 ; available stock in interim storage bin around 1,000.000 KG below target
Message no. L9040
Diagnosis
In Customizing, the setting is such that no negative stock is allowed in storage type 916. However, this posting will cause negative stock to exist in storage bin 0000000000 of storage type 916. "
Can u help me, please
thanks

Interim storage bins creation, List of standard interim storage bins

Hi,
We need to create interim storage bins as part of cutover. can someone provide me list of standard interim storage bins to be created. Which transaction will be used to create interim storage bins
Thank you

Hi,
You can use the transaction LX20 to create interim bins.
Following interim bins will be available in the standard.
001     901    WE-ZONE
001     902    WE-ZONE
001     910    WA-ZONE
001     917    QUALITAET
001     920    UML-ZONE
001     921    UML-ZONE
001     922    U-ZONE
001     980    DUMMY
001     998    AUFNAHME
001     999    DIEBSTAHL
001     999    SCHROTT
Thanks & Regards,

Wm issue creating new interim storage bins

Hi
How to create new interim storage area and assign to movement types
G N Kumar

PLease confirm whether it is interim Storage Type or storge bin, i think it would be interm storage type (ext area for GR/ shipping area for GI - normally storage types with 9 series). If this is the case, you can do in the same way storage types are created and assigned to movement types.
Please follow the below link for more info
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
regards
arun

Picking multiple quants from one storage bin

Hello all,
I have a client that purchases copper wire in pallets that are stored initially in storage bins. During goods issues to production the pallets are split up and, when material is put back in the warehouse, storage bins end up with multiple quants that are partial pallets. When they issue goods, the system, using FIFO, picks quants from multiple bins even though one bin has sufficient quantity. That forces the warehouse staff to pick from multiple bins rather than one.
Is there a way to make the system pick all of the material from a single bin even if there are multiple quants?
Thanks,
Ross

Strategy A: Partial Quantities First
With this picking strategy the FIFO principle is overridden in order to optimize the management of stock in the warehouse
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f844b74afa11d182b90000e829fbfe/frameset.htm

Material transfer from one storage location to another storage location

HI
ISSUE : Actually we have to post 4 no's from storage location 1500 FNWP to 1500 BSTR
.by MB1B T.Code.But System takes 1,001.96gms automatically. *( movement type 911 E ) ( they want to post in units EA )*
Solution : In material master data classification tab given material conversion so when we raise mb1b then automatically it is converted to GRAMS
Is it correct ?

what is the base unit of the material?
EA
are UNE and EA maintained as alternative units?
sorry i dont know une meaning but in material master data in addition tab they maintain conversion from EA to Gram.
what is the unit used in the the sales order?
EA

Problem in J1IJ if material transfer from one storage location to another

Hi,
     We have one problem we have one material WMBMOTOR   while purchasing material we have taken excise duty thorugh J1Ig and while GR loocation was STCK   after that I have transfer the material to another location SDLV with MB1B movement type 311 now my stock is at location SDLV,    but   after making delivery when i am selecting the RG23D selection thorigh J1IJ the excise invoice is not coming for selection in J1IJ what can be the problem
   zafar
Edited by: zafar_karnalkar on Aug 13, 2010 11:38 AM

Hi,
Ref to the below details from Note 1413497 in this a ref. note given as 693562 include MJ1KO01,   and in 693562 note a correction instruction given as 282511
Can u plz explain what exactly we need to do whether we have to add include MJ1IKO01 in J1IJ program or anything else.
regards,
zafar

Free Issued material from client

Hi Gurus,
I have a scenario where we have manufacturing line of standard products. We use standard PP funcationalities.
Only non-standard requirement is few orders where part of the material is FREE ISSUED by client. I do not want to create different materail master or BOM to handle this issue as the FREE ISSUED material is also different everytime.
Now, I want PR not be generated for these items and also I want to consume this item. Also Gurus can suggest some better way of GR for free issued material received from client.
More information can be provided if the msg is not clear.
Please help.
Hemant

Thanks for the answer.
Let me repharse few lines.
I want to use same material (child items) for normal regular production cycle and also when material is free issued by client.
In a way, I am asking a requirement of any field available in PP module which will allow me to have selection of procurement stretegy. I am searching for a filed which will allow me to take decision.
Regards,
Hemant

Picking from interim area for outbound delivery

Hi experts,
When we receive goods from production to our interim area (901), we sometimes want to pick the goods from here for the delivery, The system is allowing us to pick form 901 ,but the TR is still open ,Is there a way of picking for Delivery from 901.,
For example I received 100 pcs from production.I have a customer order for 40.
We want to pick 40 from 901 and put the rest(60) into Bin.
Is there a way to deal with this?any help is appreciated.
Thanks
Chris.

Hi,
For your requirement, you need to keep the interim storage types in the Storage Type sequence in the configuration. Then only, system will allow you to Pick from the Interim Storage bins.
This problem occurs only when you are not following the system standard sequence to Pick the product from the different storage types.
As long as you maintain the WM and IM stocks correctly, you won't face any problem, otherwise it leads to lot of inconsistencies like you will see lot of negative stocks in Interim Storage Bins.
With the above situation, you will be able to issue the product even if you won't have the stock physically in the Warehouse.
Hope it helps you.
Aktar

Effect of issuing Material directly from Interim Storage BIN?

Similar Messages

Maybe you are looking for