Effect on one part of drums only?

This is a newbee question. I put a tape delay on Ultrabeat track but it applies itself on all parts of the drums. Can I add a delay effect to only the Snare in Ultra beat? Is the only method to put ultrabeat on a new track and load the kick on that one?

Hi Bob
Yes you can. When you load Ultrabeat on the Channel strip choose 'Multi-Output' NOT stereo.
In Ultrabeat's Voice Assignment area there is a routing section. Click there to route the parts you want to go to a different channel strip (for it's own effects). At the moment it will say 'Main'. Send the Snare to 3-4.
Open the Mixer in Logic. At the bottom right of the Ultrabeat Channel Strip is a little '+' button. Click on that button to create an output for 3-4. (Repeat this step to create more Aux channels for as many outputs as you have setup in UB).
Notice that the Aux channel you created has the input says: 'UB 3-4'. Now place the Tape Delay insert effect on that Aux channel and it will process only the snare, or any voices from UB assigned to UB 3-4.
JG

Similar Messages

How can I delete only one part of my xml file?

Hello,
I stored more than 100 users in only one xmltype column. For instance
Create table agro(users XMLTYPE);
... and I inserted all users inside
INSERT INTO agro values(XMLTYPE
('<?xml version="1.0" encoding="ISO-8859-1"?>
<authentication><users><user>
<name>cocoon</name>
<password>cocoon</password>
<role>admin</role>
<title>Mr.</title>
<firstname>Walter</firstname>
<lastname>Cocoon</lastname>
<company />
<street />
<zipcode />
<city />
<country>DE</country>
<phone />
<fax />
<email />
<bankid />
<bankname />
<accountid />
</user>
... another user, etc.
</users></authentication>'));
Now I tried to delete only one part of this file. For example all persons with the name"cocoon".
I used for this target the following statement:
DELETE FROM agro agro
WHERE agro.users.extract('authentication/users/user/text()').getStringVal()= 'cocoon';
When I execute this statement, Oracle DB delete all users and not only with the name "Cocoon".
How can I delete only one part of my xml file?
Kind Regards
M R

This the expected behavoir. You uploaded a document containing multiple users and then asked XML DB to delete any documnet that contained a user with the name in question. The problem here is that you are creating a mega document that contains an aggregation of user documents but then trying to work with individual user documents. This is a bad idea.
In general XML does not understand the concept of a collection of documents. It can only operate on one document at a time. Hence the tendancy to aggregate individual documents into a single larger document. Once you have an XML database, you can perform operations on collections of document, as easily as you can perform operations on individual documents, so the need to aggregate the individual documents together disappears.
If you store each user document as a seperate document then your delete will work as expected.

I need to edit out parts of a song to cut it down to two minutes for my daughter's talent show. I went to info and it will cut down one part but only one part. I need to put three parts together. I tried adding duplicates of the song to the list but if I

I need to edit out parts of a song to cut it down to two minutes for my daughter's talent show. I went to info/start time and it will cut down one part but only one part. I need to put three parts together. I tried adding duplicates of the song to the list but if If I change the start time on one it will change it on all of them.

In your library, right-click the song you want to edit.
select "get info".
go to "options" and select the start and stop times for your first section of the song.
click "OK".
Find the shortened version of the song in your library. It may take a minute for it to show up. right click it again and select "create (????) version". (the ???? is different for different formats).
The library will spit out a new, second version of the song which you can rename. I suggest you use the original title and add a 1 to the end.
Now you can go back to the other version and repeat the process with a different start/stop time.
Once you are done editing, you can burn all of your versions to a disk, just make sure your interval time is zero so there are no gaps between edits.
To keep the orginal song on your library, just go back to the original and put the start/stop times back to the original settings.

I down loaded a 3 Part audiobook but only one part plays on my ipod touch. All parts did play when first downloaded. Whats gone wrong?

I down loaded a 3 Part audiobook but only one part plays on my ipod touch. All parts did play when first downloaded. Whats gone wrong?

I would either say that the iOS is correpted due to a software glitch or y have have a hardware problem like bad memory locations that are corrupting the iOS.
- Restore from backup via iTunes. This will install a fresh copy of the iOS. See:
iOS: How to back up
- Restore to factory settings/new iOS device.   This will elimate corruptin in the backup causing the problem.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

After Effects CC Output Modules on Render Only Machines

Hi there, I'm having an issue with custom Output Module Templates and my renderfarm:
After Effects CC 12.0.0.404 (showing as up to date in Creative Cloud)
Mac OS X 10.8.4 (Latest Mountain Lion version)
Mac Pro 2.93 GHz 8-Core, Radeon 5870, 32GB RAM and with Blackmagic Decklink Extreme 3D+
Remote Machines (there are four) are Mac Pros as well (Quad-core, running 10.7.2 with 16GB RAM), using the ae_render_only_node.txt file in their user Documents folder.
The exact error:
aerender ERROR: No output module template was found with the given name.
I am trying to get a renderfarm working with After Effects CC (see exact version above). Unfortunately, I need custom output modules and I can't seem to get the render slaves to recognize them. I found older threads on this exact issue, but no solution was found.
I am using commandline aerender in OS X terminal to start a render with a basic test scene.
To simplify things, I have tried testing this on one render slave machine at a time... Same result everywhere.
Here's what I've tried:
I exported a .aom file from my main machine (where I have my desired custom Output Modules) and attempted to bring it in on the render slaves. However, because the render slaves are render only, (they have ae_render_only_node.txt in their Documents folder), the ability to import Output Modules is disabled in After Effects (it opens as the After Effects Render Engine, and the Edit>Templates menu is greyed out).
Next, I thought I'd try copying the main machine's /Users/(user)/Library/Preferences/Adobe/After Effects/12.0 folder over to the render slaves, thinking that would get whatever preference file to them that's needed to define the output modules. No luck. Launched After Effects (which loads as After Effects Render Engine) and reset my disk cache preferences (so they weren't still the main machine's). Tried aerender again... no luck. Same error:
aerender ERROR: No output module template was found with the given name.
After that, I thought it would be a good idea to sign out of Adobe Creative Cloud on the main machine, and try logging into the render slave machine with my full UserID and Password and temporarily remove the ae_render_only_node.txt file. Then, I'd import the .aom file in the full version of AE... I tried this and success! The renders work... they find the Output Modules no problem. Only issue is, as soon as I sign out, and switch to using the ae_render_only_node.txt file, the Output Modules are not found. Not sure what's going on-- if the Output Modules are being disabled by the ae_render_only_node.txt file? Or maybe signing out of my Adobe ID is removing the preferences that determine Output Modules? Don't know where the Output Module preferences are stored to be able to tell.
Next attempt: I thought I'd try syncing my preferences with Creative Cloud. I made sure to check After Effects Sync Preferences to ensure that Output Modules are set to sync. I did a sync where I uploaded my preferences from the main machine. Then, on the render slaves, I ran Sync Preferences, and chose to download preferences. Works when signed in, but not when used as a render only node. When it's a render only node, it still prompts me to Download the Sync Preferences and Quit the Application, which I do, but nothing seems to happen. I try aerender again, and still the same error:
aerender ERROR: No output module template was found with the given name.
I can't seem to find any info on where Output Modules are actually stored (apparently they're not anywhere in the User/Library/Preferences/Adobe/After Effects/ folder?). Are render only nodes not allowed to have custom Output Modules? Not even for something as simple as the Multi-Machine Sequence with a post-render action of Set Proxy enabled?
Any help is greatly appreciated!
Thank You.

I've verified this problem and filed a bug. Sorry about the hiccup.
I've trying to pin down why this happens, and while I don't have a full explanation yet I think I've stumbled onto a workaround:
Trash the prefs on the render machine.
Enable the ae_render_only_node.txt file.
Launch AE and then quit. <- This is a critical step. More on this later.
Disable ae_render_only_node.txt file.
Launch AE.
Add your Output Module template.
Quit AE.
Enable the ae_render_only_node.txt file.
After you do this, I highly recommend making a backup copy of the Adobe After Effects 12.0 Prefs-indep-output.txt file. Just in case. I've had the failure reappear.
Now test with aerender and let me know if that works. It has on my machine.
Why does this matter? When you run AE with the ae_render_only_node.txt file enabled, it appears to add a new section to the preferences: "Output Module Preference Section v28-TRIAL". It's the TRIAL part that is important. Without it, AE doesn't seem to be able to keep track of the OM's when in render_only_node mode. And if you disable the ae_render_only_node.txt file, AE has a tendency to destroy the TRIAL section (I'm still tracing why that happens).
Now, should this not work for you, I recommend you work around the problem by adding your comps to the render queue in each project. When you do that, and change your aerender flags appropriately, you can render to your desired settings without specifying OMtemplate parameter.
> I can't seem to find any info on where Output Modules are actually stored (apparently they're not anywhere in the User/Library/Preferences/Adobe/After Effects/ folder?).
You probably already discovered this. In After Effects CC the OM data is stored in the Adobe After Effects 12.0 Prefs-indep-output.txt file. In older versions of AE, a single pref file such as Adobe After Effects 11.0-x64 Prefs.txt holds all of this data.
Let me know if that workaround does the trick for you. If I get more information on the cause of the problem I'll update you.

How do I remove the 'seam' after adjusting one part of my photo?

I am new to PS, using CS6. In the attached picture ,I wanted to adjust the rear of the animal so that it wasn't so dark, she looked like she was disappearing into the dark, but my adjustment has left a 'seam' that I am struggling to fix. I looked up online how todo my initial adjustment that led to this problem, and this is what I did:
I used the lassoo and isolated her rear quarters. I created a new brightness/contrast adjustment layer, and pasted in her cut out rump in this layer. I adjusted the brightness to about where I want it, she's no longer disappearing into the dark.
However as you can see, there's now a definite 'seam' line between her fur on her front end, and the rear end where I adjusted. I tried creating another adjustment layer to adjust again, but this didn't work. I've played around with different tools,some of which won't work on the adjustment layers (I'm new, that's how you learn these things) but I'm stuck - how do I make the lighting on her fur as it recedes look even again? Or, is the way I originally did it not the best way?
I'd love some instruction on this, I have so many photos where I only want to adjust the lighting in one area, that I'm open for ideas...
thanks heaps,
cheers, Metta
Metta

Hi
Quote:"What good was that supposed to do?"
I thought this was a forum for newbies. If I knew it wasn't going to do any good, obviously, I wouldn't have tried it! If the 'stupidity' of newbies tries your patience and has you rolling your eyes, then perhaps best not to let them annoy you with their stupid attempts, and hang out with those who are your equals. At least I am giving this a go. Many people are too scared to even go near PS. Or they give up the first time something goes wrong. I try to solve my own problems first. I try to learn by creating challenges - such as wanting to adjust the background on my own picture that I want to use for my own purposes rather than having everything spoon-fed to me and being afraid to move away from whatever a tutorial or book offers. Yes, I follow tutorials, but I also try and expand out from that by looking at my own pictures and what do I want to do with them, and then try and work out how to do it, even if I don't know everything yet. (And clearly I don't, as you were all too quick to remind me). I'm the kind of person who is not afraid to press a key to see what will happen. At least I am trying, and willing to learn.
As I said in my OP, the reason I chose the course of action that I did was that I was following a tutorial that I found online that instructed me that that was the way to do it; that is, to adjust one part of a photo. And the instruction said to create a new layer with the part you want to adjust cut out, and then adjust it. That part worked. So in that regard, the tutorial instructed me correctly. What I wasn't bargaining on was the 'seam' where the fur transition is not smooth. As for using brushes as you suggested, I tried that, and also the healing tool, but when I tried to use them on that layer, PS advised me that I could not use them on it. I tried a few other things, including selecting the seam area and trying to adjust that (ok, go on, laugh) but that didn't work either, but when the tools weren't working, I was left stuck on what to try next. Clearly I've done something wrong, now please teach me how I may have approached it better. I hope the screen shot is clear enough. Thank you.
Metta

Message must have exactly one part

hi,
I have tryed to create a proxy in ECC 6.0 abap but it gives an error message:
Proxy generation terminated: Message must have exactly one part
Message no. SPRX046
Background
During proxy generation, an interface description in WSDL format is fetched from the Integration Builder or from another source and interpreted. This WSDL document must describe the whole interface correctly.
==> Display Query
==> Display WSDL Document
Diagnosis
In a WSDL document, a <message> must contain exactly one <part>, therefore:
<message name="ObtenerLicenciaRequest">
<part .../>
</message>
In this case, a <message> has no <part> or multiple <part> entries. Proxy generation cannot process such messages.
System Response
Proxy generation is terminated.*
can any one help me?
The WSDL is:
http://200.0.156.42/lme_pruebas/webservices/webservicesEmpleadores.php?wsdl
Thanks

Here is the fragment from your WSDL. You have more than one line with <part name...>:
- <message name="ObtenerLicenciaRequest">
<part name="rut_empleador" type="xsd:int" />
<part name="dv_rut_empleador" type="xsd:string" />
<part name="rut_usuario" type="xsd:int" />
<part name="dv_rut_usuario" type="xsd:string" />
<part name="password" type="xsd:string" />
<part name="fecha_proceso" type="xsd:dateTime" />
</message>
According to the error message, you must have only one of those, e.g.:
- <message name="ObtenerLicenciaRequest">
<part name="rut_empleador" type="xsd:int" />
</message>

Quick search no longer searches on parts of words, only whole words. How do I fix this?

Quick search no longer searches on parts of words, only whole words. So for Example, if I were normally searching for my colleague with the last name of chadwick, I would type c then h then a then d until the list on left chadwick. Now, when I do a search on "chadw" nothing comes up and i have to type in the full word or name. I am a victim of one of these recent "upgrades" I guess.

Never mind. It was because I had the search set to searching the body of all the messages.

Apply Different effects to different parts of same text?

I have a text logo, which I want to keep intact (there's kerning) so it's all in one text box.
Let's say:
HelloNiceWeather
Could I apply different effects to different parts of the text? (for example I have 'hello' slide up from the bottom of the screen and 'nice' from the top?)
thanks! It's appreciated

You can use text Animators to effect specific characters within a text layer, defined by the "Range" parameters of the Animator. This includes functions like moves, colour fill and stroke, rotation, blur, and many more. So, in your example, you can apply an Animator to the character range "Nice", program your horizontal move, then apply a new Animator to the character range "Hello", and move them in a different way.
Read more about Animators in the Help documents here.
To apply plugin effects (like Lens Blur or Bezier Warp, for example) you would probably need to duplicate your text layer, mask out the unwanted characters, and apply the effect - depending on what you were trying to achieve.

How to apply outerglow to one part of a path?

I want only apply outerglow to one part of a path. But when i apply this outerglow to this part of the path and i let this path join the other part of the path, the outerglow dissapeares.
Any thoughts?

Outer Glow affects all of an object, not just part of it. Try cutting the path or using Pathfinder tools to turn the part you want into a separate object.

I am experiencing problems with my i phone due to sharing my daughters i tunes acoount. I have been told by apple to cancel my existing (shared) i tunes account and open a new one for my use only. How do I do this? Please help. RM

I am experiencing on going problems with my i phone 4 due to me sharing an i tunes account with my daughter. I have been told by apple to cancel my existing (shared) i tunes account and open a new one for my use only. How do I do this? I cant find any links in i tunes to do this. mountfield

No, it's done on the computer, it's just done on the web and not through iTunes. I guess you could do it on the iPhone, but it would be easier to do on the computer.
Just go to the site linked above, then click on the big blue button and fill out the neccessary information.

How to apply multiple effects on one clip

Here's a simple question, so I guess there's got to be a simple solution. Is it possible to have more than just one effect on one clip? If yes, how can I do that? I've searched the iMovie help, but it didn't give me any answer.

No, you cannot apply more than one effect at a time in iMovie '09.
However, you can always adjust Video Levels, Exposure, Brightness, Contrast, Saturation, etc. in Inspector.

Tacacs authentication fails for one user account for only one switch

Hi,
I am having an scenario, where as Tacacs authentication fails for one user account for only one switch.
The same user account works well for other devices.
The AAA configs are same on every devices in the network.
Heres the show tacacs output from the switch where only one user account fails;
              Socket opens:        157
             Socket closes:        156
             Socket aborts:        303
             Socket errors:          1
           Socket Timeouts:          2
   Failed Connect Attempts:          0
        Total Packets Sent:       1703
        Total Packets Recv:       1243
          Expected Replies:          0
What could be the reason ?
No errors on ACS server; same rights had been given to the user account.
Thanks to advise.
Prasey

Hi there,
Does the user get authenticated in the ACS logs?
reports and activity----> failed attempts
ro
reports and activity-----> passed authentications
That will help narrow it down.
Brad

My husband does not have an itunes account and wants to set one up and we only have the one computer. can you have two separate accounts? We want to set up separate iphones.

My husband does not have an itunes account and wants to set one up and we only have the one computer. can you have two separate accounts? We want to set up separate iphones.

How to use multiple iPods, iPads, or iPhones with one computer

Can I ask for a replace meant of iMac since yjere is a failure of one part every month. Last month lcd replied now optical drive.

Can I ask for a replace meant of iMac since yjere is a failure of one part every month. Last month lcd replied now optical drive.
Imac 27".
i do not like the idea of repairing every month.
Feel the imacs supplied to India are sub standard ones

Folks have reported that the Apple policy is three major component failures and the Mac is replaced. For the first two the Mac is repaired. Apple would not risk alienating its customers from one of the most populated nations in the world, so its time to stop the "discriminating against the poor Indians and selling us sub-standard Macs" routine. Occasionally the universe aligns just right for there to be a Mac lemon. Folks in every country have experienced lemons. It is the hazard of manufacturing millions of Macs with even more millions of parts, all produced by different parts suppliers. And it is why the manufacturer's warranty exists.
Speak to the vender about a replacement. If necessary call Apple Care and request that your warranty service call be escalated to Customer Relations. Politely, but firmly, explain the situation and stand your ground that the solution to make you a happy customer is to have the Mac replaced. Don't make threats, mention lawyers or claim that Apple discriminates against Indians. If you do, you will have lost your case and Apple will then work with you from a distance and follow it policies and procedures to the letter, regardless of whether it makes you happy.

Effect on one part of drums only?

Similar Messages

Maybe you are looking for