Effect to Affect Entire Sequence?

Is there a way to apply an effect to an entire sequence without nesting the sequence into another sequence? In avid you just apply an effect like a matte to an empty video track above a large section of video and affect a whole range of clips. Is there a way to do that?
I'm also wondering if there is a way to remove effects from a selection of clips without loading each clip individually in the browser?
Thanks,
S

Other than using the method Jim mentioned (which also works for copying attributes (filters etc) to other clips.
Add effect to first clip.
Get it looking the way you want.
Select all other clips you want the effect to affect.
Open FILTERS tab in viewer.
Click and drag effect or effects to selected clips in timeline.
rh

Similar Messages

When exporting a small area using in-out points, why does Premiere render audio for ENTIRE sequence?

I'm trying to export a small section of my timeline using in and out points... but it looks like Premiere wants to render the audio for the entire sequence and not just my in-out points.
I added a bunch of audio effects to the entire sequence so it's taking 10 minutes to render this audio. When I click on the cancel button, Premiere just freezes and I have to force shut it down.
Is it possible for premiere to only render the audio in the in-out points I originally asked for to cut down on export times?
-Pete

Similar problem here but on a Mac. AME is always much slower than directly exporting from Premiere, but if I start to get slow renders a reboot always sorts the issue out.

Unable to play back entire sequence in CS4

I'm transitioning from FCP to Premiere and am having an odd issue with a project. I cut up a clip with the razor blade tool, copied it a few times, reversed some in the speed/duration panel and arranged them in a sequence. I then rendered the entire work area. However, when I try to play back my sequence, it just plays less than a second and then the marker on the timeline returns to the original point. I feel stupid asking this, but...uh, how do I just play back my entire sequence? I must be missing something here.
Thanks,
Zach

Thanks for the suggestion. I thought this could have been the problem as the files are on a different disk from the application, but launching premiere as root yields the same issue. The option to repair permissions on the secondary drive (where the files are located) is greyed out in Disk Utility, possibly because I disabled permissions for everything on that disk. I even tried logging in as a user on that drive and launching Premiere, but then I get a "media pending" screen in the program window.
Any more ideas?

Export Setting: how to make "entire sequence" as default?

Hi all,
One of my largest pet peeves with Premiere Pro/Adobe Media Encoder is that it defaults to the source range of "work area". I never want to do this. I want to export the full sequence always. However Premiere Pro seems to like to change the work area slider in the timeline if I move stuff around a lot, and since I've never had to worry about this in Final Cut Pro, I'm not used to always checking to see if the work area slider is the same length as my sequence. Thus there's been many a time where my videos have exported with a big chunk of black at the end of some videos.
Is there a way to make the default source range be "entire sequence" rather than "work area"?
Thanks,
William

Nope: Adobe Feature Request/Bug Report Form
In the meantime, zoom out full in your sequence (hit the '\' key) and double-click in the time ruler. That will set the WAB to the full duration of the sequence, so it won't matter if you're set to Work Area or Entire Sequence in the Export Settings.
For what it's worth, I've also requested that the source range be able to be saved into encoding presets; that would help this situation somewhat, as well.

Applying a transition to an entire sequence?

Is there a way to bulk-apply a transition to an entire sequence? For instance, if I have a multi-clip edited with just straight-cuts, and want each cut to be a cross-dissolve? It takes forever to apply a transition to each cut afterwards. Thank you!

Set your default transition.
Then select the complete sequence timeline and drag it into the canvas choosing the overwrite with transition.

Need to apply a video filter to entire sequence...

Hey gang-
I'd really like to apply some filters (such as some color correctors and such) to an entire sequence. Same filter on all video. Copy and paste seems like a terrible waste of time, and short of exporting it and "flattening" it to it's own quicktime, I don't know how.
Thanks in advance....

Many ways:
1. Do it for one, then use the Select All Tracks Forward button (one of the forward arrows in the toolbar next to the audio meters) and drag the name of the filter from the Filters tab in the first clip onto the selected clips.
2. Do it for one clip, then copy the clip. Select all the others, then ctrl-click and go to Paste Attributes. Then select Filters.
3. Create a new sequence, then drag the old sequence into the new one. This will nest the sequence. Apply the color correction to the nested clip. This is probably the most flexible as it is much easier to make changes to the filters later on.

Hi, dragging jpeg files into i-movie - the selection of jpegs is repeating certain photos and not featuring others, making the entire sequence impossible to view. PLEASE HELP!

Hi, I have been dragging jpeg files into i-movie all week without issue. Now all of a sudden, the selection of jpegs I'm dragging is repeating certain photos and not featuring others, making the entire sequence impossible to view.
Please help, this is urgent for a funeral tomorrow! It didnt happen with any of the other family tributes, they all worked fine.
Many thanks,
Ruth

It worked! Thank you! I finally just finished about 20 minutes ago! It took over 26 hours to complete the process you described, but I stuck with it and it worked. I am glad I didn't give up or "forget it" as some might have suggested. That would have set me back until tomorrow!
Ultimately, it turned out there were 45,910 jpgs created. No wonder it took so many hours to render/display them all. It ended up being about 10 hours before it seemed they were all rendered but the process between them displaying and being able to start really deleting them took a few hours because partly I was asleep and also partly it took forever to do anything. Any action as simple as selecting and right-clicking to Get Info, or emptying the trash, would take 20-30 minutes, a couple times longer. The clock stopped many times for 20-30 minutes at a time, a few times over 30 minutes, before catching back up. My cursor never froze which is what really kept me going, although it was a spinning beach ball for most of the time. I was never so relieved to see my regular cursor as opposed to seeing a spinning beach ball as I was early this morning after about 10 hours!
Once I was able to open a Finder window and select all 45,900 files (I had already deleted 10 in the previous couple hours during experimenting of trying to figure out what would work best), then right-click and select to move all the files to the trash, the process of moving them to the trash took 4.5 hours. Then deleting them from the trash took a couple minutes. There were 21.4 GB!!! No wonder the whole process took 26 hours!
mende1, thank you so much!

How to apply a "motion" effect to an entire group of images in FCP

I have Final Cut Studio and I'm creating a time-lapse video right now out of about 3,000 high-resolution JPEG images. I've figured out how to import them in to my bin at a default length of 1 frame per image and then drag them in to the timeline (30 images per second).
I now need to make them all larger by about 60% (they automatically imported into the timeline at 45%). I also need to readjust their "center" location and "rotation" throughout the video as the camera was running for several months and got bumped here and there. So I need to zoom in (to create a buffer on the border of the images) and then rotate, tilt, and pan the frame in various places until the video is nice and smooth and consistent throughout.
My question is, how do I apply motion effects to the entire track or to hundreds of images in one shot? I'll die of old age if I have to manually apply, re-apply, and re-re-apply the settings to 3000 individual images. I've been searching for an answer to this for a while but haven't found any articles so I thought I'd post it as a question.
Any ideas would be HUGELY appreciated!
Thanks

Wow, thank you everyone for giving me so many ideas.
Tom, I never knew about the "Paste Attributes" button... and I've been using FCP for 4 years, how embarrassing. But dang, what a COOL feature! I'll be using that a lot in the future.
Kevin, this Nest feature is PERFECT! That was literally what I was looking for really (a way to keep the image high quality as I zoom in and tinker and what not).
David, the images are 1600 X 1200 @ 180 DPI. That was actually one of the lower settings in GbTimelapse, but as long as I can use the padding to crop and zoom, I'm happy. Thanks for the info though.
And Andy, thanks for the tip about Motion. Normally I only use Motion for titles but I know I really should play with it more as I'm aware of it's ability to do so much more than that.
Thanks again to everyone. Seriously, 10 minutes after I asked this question and I had 3 different, REALLY good solutions to a problem that I thought would be incredibly hard to solve, haha
Cheers guys,
Chris

If I edit an item in a datagrid is it possible to add an effect to that entire row?

If I edit an item (default ItemRenderer) in a datagrid is it
possible to add an effect to that entire row?

If you are using the mail app - Tap and hold down on the attachment icon in the email and that should bring up a window that says Open In. Do you not get that? Then you can select Pages from that window - assuming that you have Pages on the iPad.
The attachment should open when you tap on it anyway, even if you don't have Pages.

How can I modify the Fit, Crop, or Ken Burns effect for the entire movie?

How can I modify the Fit, Crop, or Ken Burns effect for the entire movie? I've been having to go through them all individually which takes forever.

You could try Edit > Select All then click on the crop button and change the setting from Ken Burns to Fit.
I find that this only works if you do not have the Automatic Cross Dissolve transitions in place.
If you do, File > Project Theme and uncheck the transitions and remove them.
After you have changed from Ken Burns to Fit, you can re-apply them.
Easiest way in future is to set up your project (File > Project Properties) before you start adding photos.
z.

Exporting entire sequence (MPEG-2 DVD) exports entire sequence audio but only 2/3 video?

I'm certain this is something simple but can't for the life of me figure out what is going on here. My entire sequence is 24:10 long. Export produces a video file that is 17:19 long and an audio file that is complete (24:10). Looking at my sequence, 17:19 is precicely in between two clips (of dozens) but there doesn't appear to be anything interesting/unusual about either of those clips or the break and transition between them?
Help!!? THANKS in advance!

Either by playing the video file (it ends precisely between those two clips) , viewing it's length metadata in Windows, or after importing in to DVD Flick to burn a DVD.
Since I posted this question I tried exporting with H.264 YouTube preset and got entire sequence exported fine (video and audio).
Sent from a mobile device. Excuse brevity.

Motion 3 not exporting entire sequence

I'm trying to export and sequence from Motion and it will not export the entire sequence. My animation is not terribly complicated, just photos with some animated text so I don't think that it's something my computer can't handle. Motion doesn't crash or do anything strange. I'm not having any problems with any other Motion projects (some that are much more involved too). It just stops the export around 3/4 way through. I've checked all my settings and everything appears to be in order. I've even tried exporting parts of the animation and it still won't export everything between the in and out points. Any suggestions?

when you export are you using "export play range"?

Applying effects to multiple clips or an entire sequence on a separate video track

I'm looking for an easy way to apply effects on a separate video track. In AVID I would just drag and drop the effect preset onto a blank layer. Or if I wanted the clip to affect just a few clips, I would add two edits (similar to razor blade) on a separate video track and drag the effect preset between those edit points. Is there a way to do this in Premiere Pro? Running CS 5.0.4. Thanks for the help!

Well, depending on what you want to do, you might actually be able to use a clip instance of one sort or another.
One option is Transparent Video (File > New > Transparent Video); by itself, Trans. Video doesn't do anything, but some effects can be applied to it and will generate an output. This doesn't work with all effects, so you'll have to experiment. Check here for more: Create a transparent video clip
Another option would be to use a Color Matte (File > New > Color Matte) or Black Video (File > New > Black Video) clip. These do have an effect by themselves, so you could apply any effect you wanted to them, and then possibly use a Blending Mode to apply it. Black Video is common for this purpose, with something like the Add mode. Again, not perfect, but it will depend on the effect you're trying to achieve.
Unfortunately, we don't have anything like AE's adjustment layers in Premiere Pro. That would solve your problem, quickly.

Gmail in mac book pro frozen on podcast rss download, Gmail in mac book pro frozen on podcast rss download affecting entire computer

Okay, so I am NOT the most tech-savvy girl so please excuse me if I'm sounding really stupid... I have a mac book pro (2 years old). I like to download podcasts on my iphone and I guess they then sync via iTunes cos they appear on my mac book pro as well. BUT recently one pattern making podcast (I'm a student fashion designer), has shown up in my gmail menu under RSS feeds, I'm not sure how long it's been there but I clicked on it a few days ago and since then my gmail is totally stuffed! When I say stuffed I mean: the whole of my gmail on MBP is frozen with the spinning beach ball of death on the open patternmaking podcast/RSS feed window I tried to open- although there is no images or anything it's just frozen before it downloaded anything. I can force quit and then use the rest of my MBP fairly ok, although it does seem slower- and I didn't have time to deal with it as I've had to write a 5000 word essay to be handed in tomorrow so I just completed that & now I can deal with it since that's all done. But if I open mail back up its still frozen on that RSS podcast thing I opened and while it's opened my ENTIRE computer is affected- it just lags (HUGELY) as in safari won't load properly, when I try to open file/edit/tools or anything on the top bar menu it takes like 10 minutes to pop down n then 5 minutes to acknowledge my command. I've just turned my MBP off right now to write this on my iphone I turned it off by pressing the power button for 10 seconds.
I desperately need this mac for uni as I study online and the $11000 programs I bought only work on mac.(as in the software that enables you to do the course is sent to you based on your type of computer) I'm terrified. Can someone please help me? In laymans terms lol I don't care if I lose ALL my emails as I have them on my iPad & iPhones so no biggy ill do whatever I have to just to fix this issue.
Thank you so much in advance;)
Olivia Preston :)

Hi Olivia,
Go to Safari menu > Preferences > RSS and uncheck all the boxes, Check for updates: Never, Mark articles as read: After clicking them, Remove articles: after one day, and Remove now. See if that does the trick.

How do I get Ken Burns effect to pan entire photo?

I created a new project and put several photos into it. I am trying to use the Ken Burns effect to pan left to right, and have made the starting box (green) fairly small, and the ending box (red) larger. It is doing what I want, but does not ever quite get to the end that I desire. It spends most of the time on the beginning part, and never shows the very far right corner of the photo. Is there a way to adjust it so I get the entire photo showing on the right side, and spend more time on that part?

Hi Joe
Think of iMovie and iDvd (both apps) as one candy bar ....the same candy bar. i-movie is like the candy bar itself whereas iDvd is just the outside paper wrapping. That's what apple means when it describes iDvd'08 and DVDSP as Apple's DVD Authoring tools (meaning we don't normally use DVD software to edit video per se; since the former is normally performed in the video editing app itself like iMovie or FCP/FCE). With this in mind....
If you don't like my candy bar analogy, then take a look at OT's comments here in the following post to get an idea of what I'm talking about:
http://discussions.apple.com/thread.jspa?messageID=7101419&#7101419
Adding Ken Burns effects essentially transforms a slideshow into a QT movie. Furthermore KB effects are normally added within iPhoto (or another 3rd party app like Photo to Movie) which then makes a QT file /movie that can be used within iDvd.
http://www.lqgraphics.com/software/phototomovie.php
If you opt to use the slideshow features within iDvd; then it won't include KB effects also (to the best of my knowledge unless one adds video to the slideshow as well; a new option w/in iDvd'08).... however you can add transitions to those sides within iDvd's slideshow option, if this is what you wish to do.
You might also want to consider this app as well:
http://www.boinx.com/fotomagico/overview/
the quality is excellent and it comes highly recommended on this iDvd forum.
Hope the above is helpful but if not just come on back.
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.

Effect to Affect Entire Sequence?

Similar Messages

Maybe you are looking for