Effect works in the preview, but not after export. (10.1.1)

Hi all.
I am new to FCP, making a simple slide show movie with some Ken Burns images, music and titles. For one image there is some color correction, Ken Burns, and I want the image to fade from Black and White to Color. I did this by adding the Black and White effect, choosing "show video animation" in the timeline and making the B&W effect gradually decrease. It works perfectly in the preview, but when I share the video, the effect is always missing (it just stays B&W). I have tried:
Undoing and redoing the effect
Exporting to different formats
Turning off background rendering and deleting render files
to no avail. Any thoughts?
Thanks in advance!

I'm hoping to avoid updating until after this movie is delivered. I find it best not to tinker with stable software mid-project. Maybe if I get desperate enough I'll give it a whirl, though.

Similar Messages

XML data connection works in the preview, but not in the final swf

Hello,
I have set-up a dashboard with an XML data connection button to load XML data from an internet source. Everthing works perfect in the preview-swf within Xcelsius 4.5. But pressing the button in the exported swf does not have any effect. The dashboard is busy for 2 seconds, but no data is loaded. What could be the reason?
Thanks.

Yes, the location is registered. The problem also occours when the swf is opened directly on the web server where the xml-source is running.

Audio ducking working in aperture preview but not in exported video

I'm using a mix of stills and video and the soundtrack level ducks during the videos when in aperture, but when i export the movie, both the video clip and soundtrack audio are at 100%
I've tried exporting to a few of the different presets and it makes no difference.
Anyone have any ideas?
I'm on aperture 3.1.2 on 2x2.8 quad core mac pro

I think this is just a glitch - I duplicated the project and when I click on the video clips in the duplicate the ducking control slider had re-appeared, and the sound was as expected on export.

Template Works in Dreamweaver Preview But Not After It's Published...

I am running CS5.5 on a Mac. I have been working on this website, and everything was working fine. I would preview the site in Firefox and everything looked great so I pubished it. Now, the content shows up, but the template doesn't (on any browser I've treid, Chrome, Firefox, Safari). I am new to Dreamweaver and need help!
http://raulescobedo.com/
Thanks!

What do you mean by "the template doesn't"? You do know that DW Templates have no function except within DW, right? You can upload them if you want to share them with someone else, but DW's Templates only affect the local files, each of which must then be uploaded. Is that what's confusing you?

Button hyperlinks work in project preview but not in published .swf

Captivate 6, button hyperlinks work in project preview but not in published .swf, the cursor changes the “the hand” but the hyperlink does not redirect.
Any ideas?
Like I said my buttons work great in preview mode after publishing, one click and the PDF opens in a new browser window. Open the project through the published .swf files and the links will not work.
Using Captivate 6 on WIndows 7

Hello,
Welcome to Adobe Forums.
Once your project published, add the .swf file in Flash Global Setting :
1) Right Click on the content (Published .swf file) and click on Global Settings
2) Go to Advanced Tab and Click on Trusted Location Settings (Scrool down to see this button)
3) Click on "Add" button and then "Add file", browse for the Captivate 6 published file and click on OK
4) Launch the .htm file again (Location where Captivate publish your project)
Hope this helps !!
Thanks,
Vikram

Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.

Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.
I REINSTALL 10 TIMES SO DON'T TELL ME THAT!!!
I'm piss because i need firefox working again so i can finish reseaching my speech in 5 days.

Which files do you have in the defaults\pref folder in the Firefox program folder?
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
See also "Other solutions":
*http://kb.mozillazine.org/Preferences_not_saved
Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 22.0: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

The screen on my iPhone is frozen and I can access apps through Siri. The touch screen works within the apps but not in the home screen. What do I do?

the screen on my iPhone is frozen and I can access apps through Siri. The touch screen works within the apps but not in the home screen. What do I do?

Have you tried a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release?

The scroll function on my mousepad is disabled when viewing a pdf file in firefox version 5.0. The scroll works on the pdf, but not on the other tabs. When the pdf is closed, the scroll function returns to normal. Any ideas?!

The scroll function on my mousepad is disabled when viewing a pdf file in firefox version 5.0. The scroll works on the pdf, but not on the other tabs. When the pdf is closed, the scroll function returns to normal. Any ideas?!

Hey thanx for the help, it worked like a charm.
I think firefox changed the application lay out, as I used to be able to choose my PDF opener from the list at " Adobe Acrobat Forms Document' where I could choose Nitro-PDF reader, but it has now moved all the way to the bottom like you suggested to the obvious place of "Portable Document Format" section.
If someone didn't tell me , I wouldn't have scrolled all the way down to be able to find it... it really should be with all its cousins up the top...
Cheers again..

My applet works in the appletviewer but not in the navigator

My applet works in the appletviewer but not in the navigator
exceptions problem1 and problem2 are throwed
this is my code
import java.applet.*;
import java.net.*;
import java.io.*;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class ValiderHtml extends Applet implements ActionListener {
JButton send =new JButton("Connexion");
JScrollPane jscrollpane= new JScrollPane();
DefaultListModel lignes=new DefaultListModel();
JList lstURL = new JList(lignes);
BufferedReader reader = null;
String ligne;
URL url;
URLConnection conn;
   public void init(){
   this.setSize(900,400);
   setLayout( new GridLayout(2,1));
   jscrollpane.setBounds(new Rectangle(19,53,160,73));
   jscrollpane.getViewport().add(lstURL,null);
   send.addActionListener(this);
        this.add(send);
   this.add(jscrollpane);
    public void actionPerformed(ActionEvent evt) {
         Send();
   public void Send(){
        try {
   url=new URL("http://www.developpez.com");
   conn = url.openConnection();
   reader = new BufferedReader(new InputStreamReader(conn.getInputStream()));
while ((ligne = reader.readLine()) != null) {
                 lignes.addElement(ligne);
    }//fin bloc try
   catch (Exception e) {
               lignes.addElement("probleme1");
            finally{
               try{reader.close();}catch(Exception e){ lignes.addElement("probleme2");}
   }// fin Send
      public void paint(Graphics g) {
            super.paint(g);
}// fin Applet

As for tracking the source of your problem your applet sucks.
Try e.printStackTrace() on a cought exception and check the (full) trace.
url=new URL("http://www.developpez.com");
Unless yor applet is on www.developpez.com this will throw an exception in an unsigned
applet without special policies.
Signing applets:
http://forum.java.sun.com/thread.jsp?forum=63&thread=524815
second post and last post for the java class file
http://forum.java.sun.com/thread.jsp?forum=63&thread=409341
4th post explaining how to set up your own policy with your own keystore

Same command works on the server but not on the workstation

Scenario
Exchange 2010 sp3
Name Value
CLRVersion 2.0.50727.4984
BuildVersion 6.1.7600.16385
PSVersion 2.0
WSManStackVersion 2.0
PSCompatibleVersions {1.0, 2.0}
SerializationVersion 1.1.0.1
PSRemotingProtocolVersion 2.1
Worstation:
Name Value
PSVersion 4.0
WSManStackVersion 3.0
SerializationVersion 1.1.0.1
CLRVersion 4.0.30319.18063
BuildVersion 6.3.9600.16406
PSCompatibleVersions {1.0, 2.0, 3.0, 4.0}
PSRemotingProtocolVersion 2.2
I input a command from my workstation using ISE
get-exchangeserver | Where-Object {$_.IshubtransportServer -eq $True} | Get-MessageTrackingLog -Start (get-date).AddHours(-2) -Sender '[email protected]'
Error:
The input object cannot be bound to any parameters for the command either because the command does not take pipeline input or the input and its properties do not match any of the
parameters that take pipeline input.
The Exact same command from the Server works.
In my profile I have the following:
set-Location c:\
$Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri 'http://MyExchangeServer/powershell'
import-pssession $Session
Import-Module ActiveDirectory
$host.PrivateData.ErrorForegroundColor = 'green'
Clear-Host
From My Workstation:
PS C:\> Get-PSSession
Id Name ComputerName State ConfigurationName Availability
1 Session1 MyExchangeServer Opened Microsoft.Exchange Available
Why does the command work on the server but not on the workstation?
Alexis

Hi Tiri2014,
There are some differences between Remote PowerShell and Exchange Management Shell. You cannot use the pipeline when you run some cmdlets by using Remote PowerShell.
Here’s a link to similar case for your reference:
Error message when you try to pipe the result of a cmdlet into another cmdlet by using Remote Powershell in Office 365 dedicated: “The input object cannot be bound to any parameters
for the command”
http://support.microsoft.com/kb/2701827/en-us
Hope it helps
Best regards

Two issues getting a headless error form windows & my clips audio plays in the preview but not once placed in th timeline. I taped with a panasonic HC 750 V. i believe it is with clips filmed using directed not surround audio.

The title more or less says it all. I have Elements 13 & am Using the Panasonic HC 750V. I shot in AVCHD 1080/60p & instead of surround sound choose the directed feature to focus on the voices in front of me. The audio works in preview but not on the timeline. I am also getting Headless errors when working with premiere that pop up in windows but it does not shut down the system.
Any help apprecaited.

pc
Have you updated your Premiere Elements 13 to 13.1 using an opened project's Help Menu/Update. If not, please do so.
Just some points of clarification on the AVCHD 1080/60p with which you are having audio problem in Premiere Elements 13.
a. I see no option to record to tape with your Panasonic model. Is there one? if not, what was recorded to, a memory card?
b. When you talk about directed not surround audio, are you saying that your video uses Dolby Digital 2 channel stereo instead of 5.1 channel?
c. Is your AVCHD footage presented to you as AVCHD.mts rather than AVCHD.mp4. I think that is the case if you are referring to Dolby Digital
rather than AAC audio.
Are you saying that you get play back video and audio if you double click the video's thumbnail in Project Assets, but you get video but no audio after you drag the file to the Timeline and play back its contents in the Edit area monitor?
a. Have you checked the Volume control under the Adjust Tab/Adjustments Palette/Volume Panel expanded to make sure the Volume has been taken all the way down? Under that condition, you will get play back in the Preview Window, but no audio from the Timeline level play back in the Edit area monitor.
b. In that same regard, if you look at the Timeline audio clip, note a yellow orange line that runs horizontally across the duration of the audio clip. Is that at the bottom of the frame or is it in the middle or at the top?
Do you work with the Elements Organizer at all? That Headess issue sounds like an Elements Organizer issue. More on that later. That issue should not prevent you from continuing your work. But we will explore that next.
Thanks.
ATR

Chapter buttons work fine in preview but not in build

Hi,
I am using video as a back ground and overlaying buttons that highlight when selected. The button routing is fine, default button set up, no overrides and it works fine in preview, however when I build it to disk no buttons are highlighted, cannot navigate or select any chapters. I deleted the menu are recreated it but same problem, anybody have any ideas?,
Regards,
Colin Browne - Irish Video Productions

Irish Video wrote:
thanks for your help. The problem was with the aspect ratio of the menu and the background video. Even though it is a 16:9 project the only way I could get it to work was to export the background video again in 4:3, change the menu aspect and re-position the buttons.
Hmmm. If there is a mismatch between menu, video and project PARs, it's possible that things got moved around enough during transcoding to make the close-but-not-overlapping button hit areas actually overlap when the project was built. The fact that repositioning the buttons and adjusting PAR fixed the problem is the biggest clue, IMHO.
At least that's my theory...
Regardless, thanks for posting back with your solution!
-Jeff

Load swf works in Publish Preview but not when published

Hi Folks,
I having a problem where im trying to load two 1mb SWF movies into my Flash piece. It works fine in Publish Preview but not when I finally publish. I get this error in IE:
SecurityError: Error #2000: No active security context.
I have googled around and there is some talk online of a hack where by you get a timeout to overcome this. However im not so technical do I dont really know how to do this to my code in AS3. My code at the moment is below.
Any help would be much appreciated and rewarded with Karma
movieClip_12.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_9);
var fl_Loader_9:Loader;
//This variable keeps track of whether you want to load or unload the SWF
var fl_ToLoad_9:Boolean = true;
function fl_ClickToLoadUnloadSWF_9(event:MouseEvent):void
if(fl_ToLoad_9)
fl_Loader_9 = new Loader();
fl_Loader_9.load(new URLRequest("search.swf"));
addChild(fl_Loader_9);
else
fl_Loader_9.unload();
removeChild(fl_Loader_9);
fl_Loader_9 = null;
// Toggle whether you want to load or unload the SWF
fl_ToLoad_9 = !fl_ToLoad_9;
movieClip_14.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_10);
var fl_Loader_10:Loader;
//This variable keeps track of whether you want to load or unload the SWF
var fl_ToLoad_10:Boolean = true;
function fl_ClickToLoadUnloadSWF_10(event:MouseEvent):void
if(fl_ToLoad_10)
fl_Loader_10 = new Loader();
fl_Loader_10.load(new URLRequest("refunds.swf"));
addChild(fl_Loader_10);
else
fl_Loader_10.unload();
removeChild(fl_Loader_10);
fl_Loader_10 = null;
// Toggle whether you want to load or unload the SWF
fl_ToLoad_10 = !fl_ToLoad_10;

I think this is either a problem with my site preLoader or my external .swf Loader. I was checking out the bandwith profiler and saw something weird and I wondered if anyone could explain...I've added a picture. I have a blank frame on only my actions layer to export classes to and it seems that frame 2 is "bleeding" into frame 1. Could this be my problem? Why would this happen? Thanks

Site works in the app, but not in the browser.

Hello iWeb experts,
I've got problems.
Last night I published my site. And while it appears, and functions, properly in my iWeb app, it doesn't do the same in Safari, Firefox, and Internet Explorer.
Two issues...
FONTS
I chose Bellamie, Univers Condensed, and Marydale as my fonts. From reading these forums, I've discovered those won't wysiwyg on other computers if the fonts aren't available and open on them. So my two choices are to make every bit of text a graphic or to use a set of more universal fonts, correct? So my questions are...One, is there a list somewhere of fonts that will work in any browser? And, two, is there a short-cut, or easy way to transform type into a graphic without having to create image files?
FUNCTIONS
Here are the functions that work fine in iWeb but have gone haywire in all of the browsers I tested...
• The type in one nav link appears smaller than all the rest.
• Some links are active, others are not.
• Rollover highlighting works on some links, but not others.
• Most of the rollover links appear in the proper static color, a few do not.
I've tested these functions on three Macs, one PC, and in the three browsers mentioned above. All of them show the exact same problems. So something must be going wrong with iWebs coding, or my host server musn't like iWeb.
Any thoughts, suggestions on these two issues? Thanks much for any advice.
John
PS - For reference, see: www.johnrunk.com

Fascinating, Kirk (+he types with one raised eyebrow+).
QuickTimeKirk wrote:
When I drag across your page most of your links do not change. The "text" portion of them doesn't change, either. Something is covering them.
I can see that. But for the life of me, I don't know what could be covering those links. In my app, when I click in the area of the links, the type is the first item selected. Unless, possibly, it could somehow be the faint reflection of my black-and-white image (me & the ground I stand on). Hmmm...
QuickTimeKirk wrote:
Single click (outside the boundaries of your page contents) and an "outline" will appear. It shows the image file dimensions and locations.
This I don't see. An outline? As in "an object outline," or as in "a list of dimensions and locations?" When I click outside my page contents, I get nothing.
Thanks, QTK. I truly appreciate your troubleshooting here.
John

Webutil - works in the form but not in the forms menu

Hi
Forms: 11.1.1.3
Dbs: 11.2.0.2
I have some code which calls webutil to do an AS to client file transfer.
This works fine when called from a button in the form.
If I have a menu on this form, and perform the same code to call webutil I get an error:
oracle.forms.webutil.fileTransfer.FileTransfer bean not found WEBUTIL_FILE_TRANSFER.getMaxTransfer will not work
So the same code will work when in the body of the form but not when in the menu.
The forms has opened up and instantiated all of its objects at both times I try to run it. But it fails from the menu code call.
Any thoughts on why one works and the other doesn't gratefull received.
cheers
Tony

Hi Tony
We also had the problem.
solution:
We have created a wrapper-form with in the webutil functionality has been implemented (with a dummy-Item).
In the form we have created a When-Timer-Expired trigger and implemented the Filetransfer functionality. Then Exit_Form.
This wrapper-form was then called from the menu.
Alfred

Effect works in the preview, but not after export. (10.1.1)

Similar Messages

Maybe you are looking for