Effective Date should appear Blank by default on SSHR Separation process

Navigation : Manager Self Service - Separation - Action Page - Termination Effective Date Options.
On this page the there is an option button "Change should take effect on the effective date as mentioned below".
Here by default the effective date appears as SYSDATE.
The requirement is that the effective date should appear blank by default. We tried using personalization, but its not possible.

By Separation I'm guessing you're referring to the 'Termination' MSS page where it defaults the Effective Date.
On this page the controller sets the Effective Date to sysdate - I don't know of any way you can blank this out without extending the delivered controller:
oracle.apps.pqh.selfservice.common.webui.EffectiveDateCO.class

Similar Messages

Delivery Date should be blank in ME51N

Hi,
We want Delivery Date as Blank & Mandatory in ME51N - PR Creation.
I have already tried with T.code OMI8, where we removed Processing time required field value as 0 under External Procurement but from this, Delivery Date is showing same date as PR Date.
Please guide, how to do this field as Blank....

Hi,
   If you want the user to input the delivery date, then you may check the following option.
1. Go to ME51N and go to personal settings and go to default values tab.
2. Maintain the delivery date as any past date as shown below and save.
3. Now, go to the path: OLME - Environment Data - Define Attributes of System Messages - System messages. Here, maintain the message ME 039 as error message E as shown below:
4. Create a new PR in ME51N and check the system behavior.
      System will always propose the delivery date mentioned in the personal settings (even though you maintain different PDT or purchase processing time). Since we maintained a past date as the default date, system will propose the past date and immediately the error message ME039 will be triggered. So the user will be alerted and he has to change the delivery date.
       Please note that the personal settings is at user level and you have to maintain the same settings for all the relevant users.
       If the above option is not suitable, you may go for development. You may check the BAdI: ME_PROCESS_REQ_CUST
Regards,
AKPT

The Account ceation date should come PCUI

Hi Gurus,
I am wokring in PCUI. After creating account i will click on save. then the Account creation date should be filled by default.
For this in which method i should do the coding. please tell me.
Regards,
Ramakrishna

Debug through the READ and MODIFY methods.

Since yesterday, clicking to read my email gets a blank window, not the email. Same w/ windows where data should be entered (like with online banking). Help!

Since yesterday, when I click to read my email I get a blank window instead of the usual window with the email itself. The same is happening with windows where data should be entered, like those virtual keyboards for online banking login, or windows where you can add records (like daily electricity and gas consumption). In all these situations, a window should pop-up and pop-up it does - but always blank.
I already unistalled/reinstalled Firefox and reset it "to its default state".
Thanks in advance for your help.
Miguel Sendim

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

BDC date field should be blank

I am creating a bdc - the date field should be blank.
My logic is if input-field ne '0'.
if w_ausbs ne '00000000'.
      PERFORM bdc_field    USING 'VIQMEL-AUSBS' w_ausbs.
   else.
      PERFORM bdc_field    USING 'VIQMEL-AUSBS' ' '.
   endif.
Initially i just tried
if w_ausbs ne '00000000'.
      PERFORM bdc_field    USING 'VIQMEL-AUSBS' w_ausbs.
endif.
However, the field still gets populated with '00000000' which casues an error since it should be blank. Able to create manually without entering a value in this field so it is not mandatory.
Any ideas on how to get this field to be left blank.
Thanks,
Jill

Hi Jill,
1. U want the date field to be blank.
a) make sure it is not compulsory
b) secondly, make sure, default value
   does not come up when entering
   data in the tcode
2. If this is so , then
   how is ur w_ausbs defined ?
   a) it should be c(8)
(so that 0000000 does not come,
spaces come !)
and specificlally passit
using
PERFORM bdc_field USING 'VIQMEL-AUSBS' w_ausbs. <---
regards,
amit m.

Sickness end date should be Default 31.12.9999

Hi Experts,
I have an issue with Leave application.
When employee selects " Sickness" from the dropdown of Leaves The end date automatically Sets to 31.12.9999. Which is correct.
But when you put the end date blank it takes the exact date of Start date.
For Example,
The start date is set to 19.06.2014. Also the end date is kept blank.
Press Enter: The end date takes the date of start date. Which should not happen.It should be defaulted to 31.12.9999
Need help to sort this out.
Regards,
Priti

Hi Siddharth,
Thanks for your reply. There is a Mandatory mark (* in red) for End Date.. I need to remove that for Sickness leave.. I tried that in Component configuration.but could not find way around.
I just need to remove mandatory * from the End date.
Need your help to erase the issue.
Please help!
Regards,
Priti

Baseline date should be default GR date

Hi All,
Kindly give me step by step idea to do
Baseline date should be default GR date through user exit.
I am new in user exit.
if there is any other way to do this mentain that all with full details.
Thanks & Regards
Shantanu.

Hi Shantanu again,
I giving example how to create Use exit and write your code.
E.g.
Follow the below steps:
1. Go to the 'Components' tab after displaying the enhancement MBCF0005 in smod.
2. Double click on the function module 'EXIT_SAPM07DR_001'.
3. Double click on the include ZXMBCU05 inside this function module.
( A warning message comes when u double clisck it, ignore it and press 'Enter'. Then u can code your enhancment in that include).
4. After the coding, activate the include and in tcode CMOD create a project and include the enhancement ZXMBCU05 in it and activate.
Your enhancement will be activated now and will be called during the processing.
after creating include put break-point in it and check with your t-code that breaking point is hitting or not.
Hope this will help.
Regards,
Vijay

When I open numbers, my spreadsheet appears blank. yet, when I moveacrossa row, data appears in the formula bar. How can I fix it so I can see the sheet?

When I open numbers, my spreadsheet appears blank. yet, when I moveacrossa row, data appears in the formula bar. How can I fix it so I can see the sheet?

I had the same issue for several days (and several reboots). During that time I found I could print the spread sheet as a pdf, though I couldn't see it except cell by cell.
Suddenly the problem disappeared. I never did know why the problem appeared nor why it disappeared.
In the interim I ran the disk utility several times and repaired permissions twice. That may have helped, but I don't know.

"Posting Date" field blank by default

Hi!
Is there any way, in transactions FB60 and F-43, so that field "Posting Date" is displayed blank whenever the user executes them? By default, this field displays the current date.
Thank you
Lucia

Hi Lucia,
The SAP standard defaults the value of the posting date automatically and it is not possible to remove this default value in BUDAT.
However, it may be possible to use a substitution to get your desired result. You can check note 42615 for information purposes.
Best regards,
Cintia

Need By Date Should be equal or after the effective start date- error in po_requisitions_interface_all

Hi All,
We have created a manual planned order for one buy item in ASCP workbench for some qty and released it.
But, we are not able to get its requisition created in source.
When we check the PO_Interface _Errors table, we found that it is errored out with error as --
Need By Date Should be equal or after the effective start date .
Can anyone please help me out to find the cause of this issue. Any help/pointer in this regard will be highly appreciated.
Thanks,
Avinash

Hi Abhishek,
We found the root cause of the issue.
Its BPA was not having any Effective start date mentioned in its terms. So we put it as BPA creation date and ran the data collection and plan run.
After that we were able to see its BPA release created without any error.
Thanks,
Avinash

Default Posting date should not be changed / Field status in FB01

Dear FI gurus,
In Transactions like FB01, MIRO, FB60, FB70 posting date is appearing automatically. But this date can be changed by the users. We want that the posting date should be made "Display only". How this can be done. Kindly guide.
thanks in advance.

Hello,
There is slight modification in the above mentioned answer:
Company code = XXXX
Check
Posting Date (BKPF-BUDAT) <> Current Date (SYST-DATUM)
Otherwise
Give the message number and E (Error)
regards

Billing date should take by default

Hi dear,
Please give me the solution for how the Billing date should take by default in VF01 screen( taday's date) .
So that users are not allowed to enter the billing date in vf01 screen.

Hi
If you want the billing date should be in display mode then see below
Go to SHD0- t code and create the transaction variant for the VF01 in that tick the Billing date as display and save.
then assign the transaction variant in the standard variant and activate the same.
whenever the user enters the t code VF01 the billing date should show in display mode
If you have any further claririfcations let me lnow
Regards
Damu

By default In a table Data should be Displayed.before clicking the search b

Hi All,
I m using adf11g.I have taken adf query with panel(thrgh Drag&drop in named Criteria).after that i have taken table(Drag Drop in a form ) from Data Control.
So My Requirement is By default In a table Data should be Displayed.after that clicking the search button *then thrgh criteria then data should be displayed.So plz any body help me this question to the answer.I m waiting for ur reply.
Thanks&Regards
Anup
Cell-9987984070
Edited by: user13098384 on May 10, 2010 12:32 AM
Edited by: user13098384 on May 10, 2010 12:44 AM

Hi All,
Same problem i m getting.By default Data is not comming bfr search button,if search button then data is comming.Plz give me reply.
Thanks
Anup

Pop-up should appear on call date for IP10

hi
we maintain function location,equipment ,call date ,plan date in IP42.
my requirement is pop-up should appear on call date so that fun.location and equipment is due for maintainance on plan date for
maintainance dept user.
Regards
deepika.

quote:
Originally posted by:
Ramona _
I would like for a pop up to appear on closing the "x" on the
top right of a browser window,
What this means is, I want a pop up to appear when a user is
trying to leave my website. Example: give them a special offer.
I do not want this message to appear when they leave to
visit/surf other areas of my website.
Please help!
You could try this:
1. Create the HTML page popup page the way you want. lets
call it popup.html
Now if i understand correctly, you want to go to this
popup.html you just created if the user wants to close the main
page right?
2. This goes in the main page:
<body onunload="javascript:logout()">
The function
logout() looks something like this:
function logout ()
window.open("popup.html");
I hope that helps you.
But if my pop up blocker is running this code wont work
anyway.

Text should appear both in chinese and english language in smartform-Urgen

Hi All,
In my requirement in smart form, the standard text and values to be printed should appear both in english and chinese language.
When my login language is EN(English), I cannot able to see the chinese text , but only the english text.
If login in Chinese language, I can able to see the both the Chinese and English text in print preview, even then in printout the chinese text is missing.
Please let me know what will be the problem.
What printer i can use to get both chinese and english text.
Thanks in advance
Saravana

Hi
See the attached 2 OSS notes for your problem
OSSNote:960341
Symptom
In some device types (e.g HPLJ4, HPLJ5) you experience non-uniform character spacing in the PDF document after the PDF conversion of SAPscript or Smart Forms documents, using HELVE or TIMES fonts. You want to know the reason.
Other terms
CONVERT_OTF, SAPscript, Smart Forms
Reason and Prerequisites
The problem is not due to an error in the PDF converter but due to the fact, that the printer font, underlying the device type (e.g. Univers or CG Times in PCL-5 device types), is not available for the PDF converter and is either not available in Adobe Reader. The PDF converter has to try to simulate the layout of the printer font by means of a font which is predefined in Adobe Reader. This is done by assigning the letter widths of the printer font to the font used in Adobe Reader.
The PDF file contains a table with letter widths, used by Adobe Reader in the output of text, for each used printer font (except PostScript fonts).
Example:
%Charwidth values from HP4300 HELVE 060 normal
/Widths
[ 278 333 500 633 633 1000 758 333 333 333 633...
Adobe reader converts this width table, by modifying the space between each character, so that the specified letter width (= space between the current and the next letter) is kept.
This 'Simulation' of printer fonts results in the sometimes visible irregular spaces in PDF.
The PDF converter always uses the Helvetica Adobe PostScript font for the display of HELVE and the Times Roman Adobe PostScript font for the display of TIMES. However, for these Adobe PostScript fonts, Adobe Reader often uses a Windows TrueType font, which differs slightly from the original PostScript font.
Solution
Workaround: Use the POST2 PostScript device type or the PDF1 PDF device type for the PDF conversion of documents in the Latin-1 character set. They both use the Adobe PostScript fonts Helvetica or Times Roman for the HELVE/TIMES printer fonts.
Header Data
Release Status: Released for Customer
Released on: 30.06.2006 12:44:06
Priority: Recommendations/additional info
Category: Consulting
Primary Component: BC-CCM-PRN Print and Output Management
Secondary Components: BC-SRV-SCR SAPscript
OSS Note: 776507
Symptom
Documents printed via SAPscript or SmartForms do not print with correct special characters, e.g. ### prints instead of Japanese or Russian characters. What to do?
Other terms
SAPscript, SmartForms, printing, device types, OTF
Reason and Prerequisites
Help required to choose proper fonts in a SAPscript or SmartForm
Solution
When using SAPscript or SmartForms to print (or email or fax) a form from a business application, many factors influence the outcome of the actual text within the form. All these factors must be checked in order to ensure a correct printout:
1) The language version of the form used to produce the printout.
Example: If you want to print a French invoice, you need to have a FR version of your SAPscript or SmartForms invoice form RVINVOICE01. And the application program must specify the corresponding language key (FR) when calling the SAPscript or SmartForms API.
2) The font selections specified in the form (possibly also in a SAPscript style or SmartStyle used in a form).
Example: In a SAPscript form or a SmartStyle you need to specify HELVE if you want to print German text in Helvetica (or similar) font. If you want to print Japanese text, HELVE is not a valid choice but you need to specify a Japanese font like JPMINCHO in your Japanese form.
3) The output character set of the device type
Every printer in transaction SPAD has a "device type" assigned. Device types used by the spooler for printing support only one single specific output character set. All text from the form has to be converted (using SAP's built-in character conversion mechanism) to this output character set.
A character set can typically support either a single language (e.g. Shift-JIS which supports only Japanese) or a set of languages (e.g. ISO 8859-1, which supports Western-European languages). It is possible that a given language (such as German) can be supported by several output character sets, e.g. you may use either ISO 8895-1 (Latin-1) or ISO 8859-2 (Latin-2) to represent German text. This is so because both character sets contain the special characters used in German.
Example: HPLJ4000 is a HP LaserJet device type supporting the ISO 8859-1 (Latin-1) character set. ISO 8859-1 can be used to represent e.g. Dutch, English, French, German, Spanish, Swedish but NOT Russian or Japanese.
As a consequence, it is ok to use HPLJ4000 to print English, German French etc. but not for Japanese or Russian.
4) The set of available printer fonts for a given device type
When formatting a document, SAPscript and SmartForms perform an automatic mapping of the font definitions in the form (e.g. "HELVE 14 point bold") and the available printer fonts of the device type. A replacement printer font is chosen, should the specified font selection not be available in the device type. Now this replacement can be problematic if a language-specific font, such as Chinese CNSONG, is specified in a form and it gets replaced by a font which does not support this language, e.g. COURIER.
To solve this problem, font families in SE73 have language attribute assigned, e.g. some fonts are characterized as being suitable only for certain languages. And when a replacement has to be chosen because the original font from the form is not available in the device type, a replacement font is chosen which has the same language attributes.
If no fonts for the language in question exist in the device type, the resulting font will not be able to print the special characters and you will see "wrong" output characters in the printout.
Note on SAPscript/SmartForms Print Preview:
The OTF Print Preview available in Windows GUI (e.g. from transaction SP01) will sometimes not show the "wrong" characters which appear on the final printout. Here is the reason: since the Print Preview runs in Windows environment, it will use Windows fonts to represent the actual printer fonts. A Windows font typically has more available characters (i.e. covers more character sets) than are actually available in a printer's resident font.
A typical example where the Print Preview will differ from the printout is here: if you have a Chinese PCL5 printer such as CNHPLJ4 and use the Western Latin font COURIER in your document, the print preview will show you Chinese characters if you (by accident) tried to format Chinese characters in COURIER font. This is because Windows will automatically choose a font that can output Chinese characters (which is actually not Courier). But when you print the job on an actual PCL5 printer with resident Western and Chinese fonts, the Courier font will not print any Chinese characters but Western special characters instead, because the printer's resident Courier font does not include Chinese characters.
Rule of thumb: all Asian device types (e.g. CNHPLJ4, JPHPLJ4, JPPOST, KPHPLJ4) support not only Asian fonts but also COURIER, HELVE and TIMES fonts. But these Latin fonts can only be used to print English text, not Chinese/Japanese/Korean characters.
Which fonts are suitable for a given language?
Language(s):            Font family to use in a form:
Latin-1 (Western Europe/Americas) *******
DE,EN,FR,ES,NL,SV       COURIER, HELVE, TIMES
                        (LETGOTH, LNPRINT)
Latin-2 (Central Europe) ****************
PL, CZ                  COURIER, HELVE, TIMES
ISO 8859-4 (Baltic) *********************
ET, LT, LV              COURIER, HELVE, TIMES
ISO 8859-5 (Cyrillic) *******************
BG, RU, SR, UK          COURCYR, HELVCYR, TIMECYR
ISO 8859-7 (Greek) **********************
EL                      COUR_I7, HELV_I7, TIME_I7
ISO 8859-8 (Hebrew) *********************
HE                      COURIER, HELVE, TIMES
ISO 8859-9 (Turkish) ********************
TR                      COURIER, HELVE, TIMES
Simplified Chinese **********************
ZH                      CNHEI, CNKAI, CNSONG
Japanese ********************************
JA                      JPMINCHO, DBMINCHO, DBGOTHIC
Korean **********************************
KP                      KPBATANG, KPDODUM, KPGULIM
                        KPGUNGSE, KPSAMMUL
Traditional Chinese *********************
ZF                      TWDPHEI, TWMING, TWSONG
Thai ************************************
TH                      THANGSAN, THDRAFT, THVIJIT
Arabic (Unicode systems only) ***********
AR                      ANDALE_J
Verify your output by examining the OTF data
When analysing printing problems of this type, be sure to check the OTF data which gets produced by SAPscript or SmartForms. OTF or "Output Text Format" is the intermediate page-description format generated from SAPscript or SmartForms. OTF will contain the final printer font names and character set/language identifiers which help to solve the problem. OTF will even name the form and the language of the form used to create the output.
The easiest way to do this is to create a spool request from your application, run transaction SP01, use menu
Goto->Display Requests->Settings
and choose
Display Mode: Raw
Now display your spool request. If this is a SAPscript or SmartForms spool request, you will see OTF data. Each line represents one OTF command, every command starts with a 2-character cmd identifier and possibly some cmd parameters follow.
Here is an excerpt from a sample OTF file where we highlight the most interesting commands:
//XHPLJ8000    0700 00000000001
IN04EALEXTEST_ZEBRA
IN05%PAGE1
OPDINA4 P 144 240 1683811906000010000100001
IN06%WINDOW2
MT0024401289
CP11000000E
FCHELVE 120 00109XSF100SF101110000067E X
UL +0000000000000
SW00067
CT00000000
ST0453037Dieses SF hat Stil ALEXTEST_ZEBRA mit
The 1st line with the // (Control) command reveals the device type usedto print: HPLJ8000
//XHPLJ8000    0700 00000000001
The 2nd line (IN = Info command) shows the name and (internal 1-char)language key of the form:
IN04EALEXTEST_ZEBRA
In this case it is the English (E = EN) SmartForm ALEXTEST_ZEBRA
The OP-line (OP = Open Page) gives the page format used in the form, it is DINA4 Portrait orientation:
OPDINA4 P 144 240 1683811906000010000100001
The CP (CodePage) cmd shows the SAP system codepage used to code the text and the active language. In our case it is codepage 1100 and language E = EN = English.
CP11000000E
Finally, the FC-cmd (Font Call) lists a printer font selected within SmartForms. Please note that every SmartForm has a designated default SmartStyle under "Form Attributes->Output Options". In addition, every text node can have a SmartStyle attached (which will override the definitions from the default style for the text). In our case the resulting printer font that was selected is HELVE 12.0 pt bold-off, italic-off.
FCHELVE   120 00109XSF100SF101110000067E X
Header Data
Release Status: Released for Customer
Released on: 22.08.2005 09:57:20
Priority: Recommendations/additional info
Category: Customizing
Primary Component: BC-CCM-PRN Print and Output Management
Secondary Components: BC-SRV-SCR SAPscript
BC-SRV-SSF Smart Forms
reward if useful
regards,
ANJI

Effective Date should appear Blank by default on SSHR Separation process

Similar Messages

Maybe you are looking for