Effects cannot be applied

I am trying to add a Video FX effect to a clip but it is not rendered when I click the apply botton; the red rendering bar quickly flicks through leaving the clip unrendered.
I am using iMovie 6.02 with DV.
Thanks for advice (coud not find another thread that gives advice).
Regards
Martin

Karl ...
your link contained the hint I needed after everything seemed not to remove the problem (the Info said that this HD was in extended format and journaled):
I had an eDrive from TechTool installed on that HD (eDrive is a bootable emergency image from the OSX system). When I formatted the HD, the eDrive also was removed, and this seemed to resolve the issue.
Thanks for your help (all others in this thread) !
Martin

Similar Messages

Grant effect cannot applied

illustrator CC 2014(Traditional Chinese ) , Mac OSX Yosmeite (10.10.1)
Grant effect cannot applied, the software alert a message say that the operation can not complete. So do in the Photoshop CC 2014. (actually the whole filter effect cannot work)
I have goolgled for solution, here is a blog have the same problem, it says remove the language pack then it will be OK.
here is the link (in T. Chinese) : http://goo.gl/q7jtAW
This seems to be a bug in Mac OS X Yosmeite.
But I can not remove the CT language package in illustrator, so I still cannot use the Grant effect in illustrator. Please help me!

if ( 10 <= number[i] <= 100 ) the left part is first evaluated 10 <= number to a boolean value. This boolean can not be < then an int.
but you can have two expressions 10 <= number[i] && number[i] <= 100
the && means "and"
the expression( number[i] != number[i] ) will never be true...

Create(java.io.InputStream) in Scanner cannot be applied to (java.io.File)

Ahhh!!!
Ahem, when I try to compile the file below, "PhoneDirectory.java", I get the following compilation error message:
PhoneDirectory.java:12: create(java.io.InputStream) in Scanner cannot be applied to (java.io.File)
    Scanner fin = Scanner.create(file);After quite a bit of tweaking... I'm right back where I started. I'm a seasoned programmer, as far as concepts are concerned, but rather new to JAVA.
The error seems to be occuring where a new instance of "Scanner" is supposed to be created. It uses file I/O, and I had only used the Scanner class for the keyboard input in the past.
Looking at the Scanner class, everything seems to be right to me. I'm probably missing some simple fundamental concept, and I've been pulling my hair out trying to get it... Please help me shed some light on this situation!
=========
PhoneDirectory.java
=========
import java.io.*;
// Read a file of names and phone numbers
// into an array. Sort them into ascending
// order using bubble sort.
// Print names and numbers before and after sort.
public class PhoneDirectory {
public static void main (String[] args) {
    PhoneEntry[] directory = new PhoneEntry[200];
    File file = new File("c:\\jessica\\phonenum.txt");
    Scanner fin = Scanner.create(file);
    int numberEntries = 0;
    // read array from file
    while (fin.hasNextInt())
      directory[numberEntries++] = new PhoneEntry(fin);
    // print array as read
    for (int i=0; i<numberEntries; i++)
      System.out.println(directory);
// sort by ordering defined in PhoneEntry,
// in this case lastName firstName
bubbleSort(directory, numberEntries);
// print sorted array
System.out.println(
"============================================");
for (int i=0; i<numberEntries; i++)
System.out.println(directory[i]);
static void bubbleSort(PhoneEntry[] a, int size) {
// bubbleSortr: simple to write, but very inefficient.
PhoneEntry x;
for (int i=1; i<size; i++)
for (int j=0; j<size-i; j++)
if (a[j].compareToIgnoreCase(a[j+1]) > 0) {
// swap
x = a[j]; a[j] = a[j+1]; a[j+1] = x;
=========
PhoneEntry.java
=========
class PhoneEntry {
// number, name entry for a line in a Phone Directory
protected int area;
protected int prefix;
protected int number;
protected String firstName;
protected String lastName;
public String toString() {
// format name and phone number to printable string
    String x = lastName + ", " + firstName;
    x = x +
    " . . . . . . . . . . . . . . .".substring(x.length())
    + "(" + area + ") " + prefix + "-" + number;
    return x;
public int compareToIgnoreCase(PhoneEntry v) {
// alphabetically compare names in this to names in v
// return negative for this < v, 0 for ==,
//        positive for this > v
    int m = lastName.compareToIgnoreCase(v.lastName);
    if (m == 0) m = firstName.compareToIgnoreCase(v.firstName);
    return m;
public PhoneEntry(Scanner fin) {
// input a PhoneDirectory entry. Must be space delimited
// area prefix suffix lastname firstname
    // number
    area = fin.nextInt();
    prefix = fin.nextInt();
    number = fin.nextInt();
    // read rest of line
    String name = fin.nextLine();
    // split name into lastName firstName
    int p = name.indexOf(' ');
    if (p > 0) {
        lastName = name.substring(0,p);
        firstName = name.substring(p+1);
    else {
        lastName = name;
        firstName = "";
}=========
Scanner.java
=========
    This class does input from the keyboard. To use it you
    create a Scanner using
    Scanner stdin = Scanner.create(System.in);
     then you can read doubles, ints, or strings as follows:
    double d; int i; string s;
    d = stdin.nextDouble();
    i = stdin.nextInt();
    s = stdin.nextLine();
    An unexpected input character will cause an exception.
    You cannot type a letter when it's expecting a double,
    nor can you type a decimal point when it's expecting an int.
import java.io.*;
public class Scanner {
// Simplifies input by returning
// the next value read from the
// keyboard with each call.
private String s;
private int start=0, end = 0, next;
private BufferedReader stdin;
Scanner(InputStream stream) {
    start = end = 0;
    // set up for keyboard input
    stdin = new BufferedReader(
    new InputStreamReader(stream));
public static Scanner create(InputStream stream) {
    return new Scanner(stream);
double nextDouble() {
     if (start >= end)
       try {
        s = stdin.readLine().trim() + " ";
          start = 0;
         end = s.length();
      catch (IOException e) {System.exit(1);}
     next = s.indexOf(' ',start);
     double d = Double.parseDouble(s.substring(start,next));
     start = next+1;
     return d;
public int nextInt() {
     if (start >= end)
       try {
        s = stdin.readLine().trim() + " ";
          start = 0;
         end = s.length();
      catch (IOException e) {System.exit(1);}
     next = s.indexOf(' ',start);
     int d = Integer.parseInt(s.substring(start,next));
     start = next+1;
     return d;
public String nextLine() {
     if (start >= end)
       try {
        s = stdin.readLine().trim() + " ";
          start = 0;
         end = s.length();
      catch (IOException e) {System.exit(1);}
     String t = s.substring(start,s.length()-1);
     start = end = 0;
     return t;
}=========
phonenum.txt
=========
336 746 6915 Rorie Tim
336 746 6985 Johnson Gary
336 781 2668 Hoyt James
606 393 5355 Krass Mike
606 393 5525 Rust James
606 746 3635 Smithson Norman
606 746 3985 Kennedy Amy
606 746 4235 Behrends Leonard
606 746 4395 Rueter Clarence
606 746 4525 Rorie Lonnie

I don't see a Scanner.create() method in the Scanner class but I do see a constructor with the signature you want. Change
Scanner fin = Scanner.create(file);
to
Scanner fin = new Scanner(file);

Cannot be applied to (java.io.PrintWriter) error

Hi guys I get the following errors when trying to compile my program and I was wondering how to solve it
printPay() in PaySlip cannot be applied to (java.io.PrintWriter)
slip.printPay(slipWrite)
import java.io.*;
public class PayApp
public static void main(String[] args)
    boolean end_of_file = false;
    EmpInFile   f1 = new EmpInFile();
    EmpOutFile f2 = new EmpOutFile();
    Employee    emp = null;
    PaySlip     slip = null;
    Report   sum = null;
    PrintWriter slipWrite = null;
    PrintWriter sumWrite = null;
    if (args.length != 4)    // correct number ?
      errExit("Names of Input employee file , output employee file, payslip file \n, and report file required");
     emp = new Employee();
     sum =   new Report();
     slip = new PaySlip(emp,sum);
   try
       f1.openFile(args[0]);
       f2.openFile(args[1]);
       slipWrite = new PrintWriter(new FileWriter(args[2]));
       sumWrite = new PrintWriter(new FileWriter(args[3]));
      catch(IOException e)
         System.err.println("error opening files" + e.toString());
         System.exit(1);
     while (!end_of_file )
        end_of_file = f1.readRecord(emp);
        if(!end_of_file)
           slip.printPay(slipWrite);
           f2.addRecord(emp);
        }// end if ! end
      }// end while
       System.out.println("All employees processed ");
       sum.printTotals(sumWrite);
       sumWrite.flush();
       sumWrite.close();
       slipWrite.flush();
       slipWrite.close();
       f1.closeFile();
       f2.closeFile();
static void errExit(String message)
   System.err.println(message);
   System.exit(1);
public class PaySlip
// declare variables
     private double gross;
     private double tax;
     private double taxcredits;
     private Employee emp;
     private Report rep;
     public PaySlip (Employee e, Report r)
     emp = e;
     rep = r;
     double gross = 0;
     double tax = 0;
     double taxcredits = 0;
     public void setGross(double gr)
     gross = gr;
     public void setTax(double tx)
     tax = tx;
     public void settaxCreds(double taxcreds)
     taxcredits = taxcreds;
     public void printPay()
     emp.calcPay(this);
     double netpay;
     netpay = gross - tax;
     System.out.println("____________________________________________________");
     System.out.println("               Payslip Information                  ");
     System.out.println("Employee Name: \t\t" +emp.getFirst() +" "+ emp.getLast());
     System.out.println("Employee Id: \t\t" +emp.getId());
     System.out.println("Net Pay: \t" +netpay);
     System.out.println("Year To Date Gross: \t" +emp.getYtdGross());
     System.out.println("Year To Date Tax: \t" +emp.getYtdTax());
     System.out.println("____________________________________________________");
     System.out.println("               Department Totals                    ");
     char dcode = emp.getDeptCode();
     rep.addToTotals(gross,tax,dcode);
}Any help would be greatly appreciated.

Post the actual error which would in include a line number when noting errors.
slip.printPay(slipWrite); The method printPay() does not take parameters. So you can't put 'slipWrite" there.

Method cannot be applied error

I am having trouble compiling my application because it says a sorting method I want to use cannot be applied to the array I want to sort.
I have a class that was supplied by my instructor that contains a constuctor for an object called "automobile". This constructor has 4 args which are (string, string, double, double). The strings are for make and model of vehicle and the doubles are for gas tank size and range on a full tank. The constructor takes the double values and calculates the miles per gallon. In my application I am making an array of 15 vehicles called "automobile". When I print to an outpuBox the list of vehicles, everthing looks fine. The problem is I need to sort the array by the miles per gallon. Now I have made a seperate class the contains my "cocktail shaker sort", but when it seems that the array of vehicles I created cannot be used in the args of the sort method. Any help would be greatly appeciated. This thing was due a week ago and I've been pulling my hair for 3weeks.
The error message is:
Autos.java:64: cockTailSort(int[]) in CockTail cannot be applied to (Automobile[])
CockTail.cockTailSort(automobile);
1 error
Below is my application and following that will be the cocktailshaker class.
import javabook.*;
import java.text.DecimalFormat;
class Autos
public static void main (String[] args){
MainWindow mainWindow;
InputBox inputBox;
OutputBox outputBox;
MessageBox messageBox;
ResponseBox responseBox;
String modelName, modelType;
double gasTankCapacity, rangeOnFullTank;
int count;
mainWindow = new MainWindow ("Automobile input");
inputBox = new InputBox (mainWindow);
outputBox = new OutputBox (mainWindow);
responseBox = new ResponseBox (mainWindow );
messageBox = new MessageBox (mainWindow);
messageBox.setVisible (false );
mainWindow.setVisible ( true ) ;
outputBox.setVisible ( true ) ;
Automobile[] automobile = new Automobile [3];
int i=0;
count =1;
for (i = 0 ; i < automobile.length ; i ++){
modelName = inputBox.getString ("Enter Model Name for vehicle #" + count);
modelType = inputBox.getString ("Model Type for #" + count);
gasTankCapacity = inputBox.getDouble("Gas capacity for #" + count);
rangeOnFullTank = inputBox.getDouble("Fulltank range for #" + count);
automobile[ i ] = new Automobile ( modelName, modelType,gasTankCapacity,rangeOnFullTank );
count ++;
CockTail.cockTailSort(automobile);
for (i = 0 ; i < automobile.length ; i ++){
automobile.displayAutomobile(outputBox);
Here is the sort:
import javabook.*;
class CockTail
public CockTail()
public static void cockTailSort (int a [] )
boolean sorted = false;
int top = a.length -1, bottom =0;
for (int pass =1; bottom < top && !sorted; pass ++)
sorted = true;
if (pass % 2 != 0) // odd # passes
for (int i = bottom; i < top; i ++)
if (a[i] > a[i + 1])
sorted = false;
int temp = a[i];
a[i] = a[i + 1];
a[i + 1] = temp;
top --;
else // even-numbered passes
for (int i = top; i > bottom; i--)
if (a[i - 1] > a[i])
sorted =false;
int temp = a[i];
a[i] = a[i - 1];
a[i - 1] = temp;
bottom ++;

Well I changed it to what you said and it didn't work. I really appreciate your though.
Here are the source codes :
import javabook.*;
import java.util.*;
import java.text.DecimalFormat;
class Autos
* Setting data members and constructors
public static void main (String[] args){
MainWindow mainWindow;
InputBox inputBox;
OutputBox outputBox;
MessageBox messageBox;
ResponseBox responseBox;
String modelName, modelType;
double gasTankCapacity, rangeOnFullTank;
int count;
mainWindow = new MainWindow ("Automobile input");
inputBox = new InputBox (mainWindow);
outputBox = new OutputBox (mainWindow);
responseBox = new ResponseBox (mainWindow );
messageBox = new MessageBox (mainWindow);
messageBox.setVisible (false );
mainWindow.setVisible ( true ) ;
outputBox.setVisible ( true ) ;
outputBox.printLine("This program will ask for data for 15 vehicles and ");
outputBox.printLine("calculate the Miles Per Galllon for each vehicle and ");
outputBox.printLine("compare the MPGs to be displayed in a sorted list in an outpuBox.");
outputBox.printLine("you will be asked to enter the vehicles model, model type");
outputBox.printLine("gas tank capacity and total range on a full tank.");
// create an automobile array
Automobile[] automobile = new Automobile [3];
* Loop for data inputs an array creation
int i=0;
count =1;
for (i = 0 ; i < automobile.length ; i ++){
modelName = inputBox.getString ("Enter Model Name for vehicle #" + count);
modelType = inputBox.getString ("Model Type for #" + count);
gasTankCapacity = inputBox.getDouble("Gas capacity for #" + count);
rangeOnFullTank = inputBox.getDouble("Fulltank range for #" + count);
automobile[ i ] = new Automobile ( modelName, modelType,gasTankCapacity,rangeOnFullTank );
count ++;
*Code for cocktail sort method call
CockTail.cockTailSort(automobile); // Error in code
* Display data and MPG's in outputBox
for (i = 0 ; i < automobile.length ; i ++){
automobile.displayAutomobile(outputBox);
Here is the cocktail shaker sort:
import javabook.*;
import java.util.*;
class CockTail
//public CockTail()
public static void cockTailSort (Automobile[] a )
boolean sorted = false;
int top = a.length -1, bottom =0;
for (int pass =1; bottom < top && !sorted; pass ++)
sorted = true;
if (pass % 2 != 0) // odd # passes
for (int i = bottom; i < top; i ++)
if (a[i] .compareto( a[i + 1])==1)
sorted = false;
Automobile temp = a[i];
a[i] = a[i + 1];
a[i + 1] = temp;
top --;
else // even-numbered passes
for (int i = top; i > bottom; i--)
if (a[i] .compareto( a[i - 1])==1)
sorted =false;
Automobile temp = a[i];
a[i] = a[i - 1];
a[i - 1] = temp;
bottom ++;
Here is what I know of the Automobile class:
// JBuilder API Decompiler stub source generated from class file
// Aug 6, 2002
// -- implementation of methods is not available
// Imports
import java.lang.String;
import javabook.OutputBox;
class Automobile {
// Fields
private String modelName;
private String modelType;
private double gasTankCapacity;
private double rangeOnFullTank;
private double milesPerGallon;
// Constructors
public Automobile() { }
public Automobile(String p0, String p1, double p2, double p3) { }
// Methods
public int compareto(Automobile p0) { }
public void displayAutomobile(OutputBox p0) { }

PSE 9.0.3 update can't install. Error message is "patch cannot be applied."

PSE 9.0.3 does not install. Error message "patch cannot be applied."

Manually install the download the update from below given link:-
For Mac:- http://www.adobe.com/support/downloads/detail.jsp?ftpID=5012
For Win:- http://www.adobe.com/support/downloads/detail.jsp?ftpID=5000
Download and install the update.

Cannot install update 9.0.3 in my Photoshop Elements 9. Getting error msg "Patch cannot be applied".

Cannot install update 9.0.3 in my Photoshop Elements 9. Getting error msg "Patch cannot be applied". How can I correct?

Nobody can know. You are not offering system info or otehr details. Start by uninstalling and reinstalling the base program.
Mylenium

CompareTo(Comparable) cannot be applied to...

When I try to compile my set of files, while trying to create a priority queue, I get the following errors:
Lijst.java:53: compareTo(Comparable) in Comparable cannot be applied to (java.lang.Object)
    if (lst == null || x.compareTo (lst.wrd) <= 0 ) {
                        ^
Lijst.java:58: compareTo(Comparable) in Comparable cannot be applied to (java.lang.Object)
    while (h.succ != null && x.compareTo (h.succ.wrd) > 0) {
                              ^
Lijst.java:69: compareTo(Comparable) in Comparable cannot be applied to (java.lang.Object)
    if (lst == null || x.compareTo (lst.wrd) < 0 ) {
                        ^
Lijst.java:74: compareTo(Comparable) in Comparable cannot be applied to (java.lang.Object)
    while (h.succ != null && x.compareTo (h.succ.wrd) > 0) {
                              ^
Lijst.java:78: compareTo(Comparable) in Comparable cannot be applied to (java.lang.Object)
    if (h.succ == null || x.compareTo (h.succ.wrd) < 0) {But x was typecasted to a Comparable in Lijst.java:
void voegIn (Object y) {
    Comparable x = (Comparable) y;
    if (lst == null || x.compareTo (lst.wrd) <= 0 ) {
      zetVoor (x);
      return;
}Why does Java forget that typecast???

But that's why I've tried to typecast it to a
Comparable. Because the argument of the compareTo
function will be of type Toestand which implements
Comparable.
What's the alternative for this, if this is all
wrong??Looks like you'll need to cast both the reference to
the object whose method you're invoking and the
reference to the argument. Comparable foo = (Comparable)bar;
bar.compareTo((Comparable)lst.wrd); Or something like that.And of course this only works if lst.wrd points to an object that actually does implement Comparable.

Operator + cannot be applied to operands of type 'method group and 'int'

Hello I have a problem that I'm trying to fire a bullet everytime I pressed the spacebar key, but I have this problem that is cropping up.
if ((e.KeyCode == Keys.Space) && (playerOne.Bullet.Alive == false))
playerOne.Bullet.Alive = true;
playerOne.Bullet.getX = playerOne.getXposition + 15;
playerOne.Bullet.getY = playerOne.getYposition + 10;
It says in the error list: "Opeartor '+' cannot be applied to operands of type 'method group' and 'int'", I have no clue. I'm also new to programming.

I want to get the bullet to shoot where the player is, here is the code:
class Player
// attributes here - Int other words data types and variables:
int health = 3;
float xPosition;
float yPosition;
Bitmap playerGraphics;
int score = 0;
bool leftPressed;
bool rightPressed;
float Width = 50;
public Bullet Bullet = new Bullet();
// functions here:
public void Init()
// Get Player_Bat.png from resources, so that we can work with it:
playerGraphics = new Bitmap(Green_Aliens.Properties.Resources.Player_Bat);
health = 3;
score = 0;
xPosition = 375;
yPosition = 540;
leftPressed = false;
rightPressed = false;
Bullet Bullet = new Bullet();
public float getWidth()
return Width;
public void toggleLeftPressed()
if (leftPressed == true)
leftPressed = false;
else
leftPressed = true;
public void toggleRightPressed()
if (rightPressed == true)
rightPressed = false;
else
rightPressed = true;
public bool getLeftPressed()
return leftPressed;
public bool getRightpressed()
return rightPressed;
public Bitmap getGraphics()
return playerGraphics;
public float getXposition()
return xPosition;
public float getYposition()
return yPosition;
public int getHealth()
return health;
public int getScore()
return score;
public void moveLeft()
xPosition -= 10;
public void moveRight()
xPosition += 10;
public void loseLife()
health--;
public void adScore(int valueAdd)
score += valueAdd;
//Resets the player to the start position:
public void resetPosition()
xPosition = 400;
yPosition = 550;

Cannot be applied

Hello,
I am trying to call the method print();
Could someone please tell me what parameters i need to put in to get it to call? Right now its giving me a cannot be applied error.
The print() method is in the Coin class which is a different class. Thanks
Coin p = new Coin()//<----pretty sure i need this to call a method in a different class
Coin.print(not sure what to put here);
public static void print(int ncount,int dcount,int qcount,LinkedList<String>nickels,LinkedList<String>dimes,
                             LinkedList<String>quarters,String type)//<---method that needs to be called

Honestly, because static methods are easier to call.Huh? Apperently you have no idea what static means.
Sorry Im really new.No need for sorry, just do some research if you don't know what something means/does. You should use the static keyword for methods that "do not directly belong" to a specific instance of a class.
Example:
class Coin {
static Coin createNickle() {
    // return a Coin with a value of a nickle
}now you can create a Coin object with the static above:Coin nickle = Coin.createNickle();But a print() method suggests that you print the internal state of an instance (nickle is an instance of a Coin)
class Coin {
int value;
static void print() {
    // from here you cannot print 'value', since the print() method is static!
    // In other words: it does not belong to this instance
}so you should do it like this:class Coin {
int value;
void print() {
    // now print the 'value' variable
}and you can now do:Coin nickle = Coin.createNickle();
nickle.print();understand?
Of course, you can create new intance of a Coin by calling it's constructor (if there is one), it was only an example of me to do it with a static (factory) method.

SAP Front-End Patch cannot be applied error

I have SAP GUI 7.2 patch level 4 installed on my machine and I am adobe life cycle designer. I got this error when I tried to install
"This SAP Front-End Patch cannot be applied. Either the installed components are already on the same patch level or the components to be patched are not yet installed at all.
SAP Interactive Forms - Adobe LifeCycle Designer 8.0 Patch
Patchlevel 3"
How do I install the adobe LifeCycle designer?

hello,
Please try uninstalling and reinstalling the GUI
a) Remove all SAP components via "Control panel", this is very
important
b) Install SAP GUI
c) Install latest GUI Patch
You can download these patches from the following url.
Apply GUI 7.10 patch from the following url,
Goto URL: http://www.service.sap.com/swdc
SAP Software Distribution Center -> Download -> Support Packages and
Patches -> Entry by Application Group -> SAP Frontend Components ->
SAP GUI FOR WINDOWS -> SAP GUI FOR WINDOWS 7.10 CORE -> win32 ->
regards,
John Feely

Error: After Effect cannot open becaujse TBB.dll is missing

Hi, I had a problem with AECC when trying to open it it said the error: After Effect cannot open becaujse TBB.dll is missing from you computer. Please Reinstall. I thought "ok, if I only reinstall it it is not a problem" but I came to another problem: How do I uninstall it? It does not show up in the control panel and on the CC Manager it says it is up to date.

helpless2014 wrote:
This not an answer.
Mylenium's answer is a good one. Granted, you might not like the answer, but it is an answer that will solve your problem.
Here's how to uninstall through the Creative Cloud software: Creative Cloud Help | Uninstall Apps
That might fix AE, however, it sounds from your posts that Photoshop isn't working either, but your post isn't very clear. You say something about Fireworks too...
More info about your specific setup might be useful.
Again, it sounds like something got corrupted on your machine, so uninstalling all your software, running the CC Cleaner tool, and reinstalling is a pretty good suggestion if the regular uninstall/reinstall doesn't work.
helpless2014 wrote:
and why are there more than one version offered for install at the same time??
For troubleshooting, for client compatibility, for workflow requirements, and for many other reasons. On my home machine I have AE CS5, CS6, CC, and CC 2014 all installed and am happy that I can download and install older versions of other Adobe software if I need them too.

'operator + cannot be applied to double'

public double getTotalPrice() {
        if (orderItems.size() == 0) {
            return 0.0;
        double total = 0.0;
        for (Iterator it = orderItems.iterator(); it.hasNext();) {
            OrderItem oi = (OrderItem) it.next();
             total += (oi.getCost()).multiply(BigDecimal.valueOf(oi.getPurchaseQty()));
        return total;
}ive got this method here and this part's got an error:
total += (oi.getCost()).multiply(BigDecimal.valueOf(oi.getPurchaseQty()));Error: operator + cannot be applied to double, <any>
any help is appreciated. thx

What type does this return?
(oi.getCost()).multiply(BigDecimal.valueOf(oi.getPurchaseQty()))At a glance, I'd guess BigDecimal. You can't use arithmetic operations like + on BigDecimal. You'd have to call its doubleValue method, or whatever there is that returns a double. Of course, since BigDecimal can hold numbers that double can't, that could give you bogus values, so you really need to make total a BigD as well, and call BigD's methods in place of +=, or else stick to numbers that fit in a double and don't use BigD at all.

After Effects cannot load required font!

After installing some new fonts I get the error message "After Effects cannot load required font for the AE interface. Please replace the font or reinstall AE." How can I fix this? Do I really have to reinstall AE? Someone please tell me that there is an easier way to fix this .
Thanks.
Pedro

This bug is fixed in the After Effects CC (12.1) update:
http://adobe.ly/AE_CC_12dot1_details
Let us know how this works for when you've tried with the new update.

Weblogic.servlet.jsp.StaleChecker cannot be applied

Hi,
I am getting the following error when i try to access the web application deployed
on the weblogic 8.1 sp2 application server. The same works fine on weblogic 7.1.
Please let me know if any of you came across this problem.
C:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_rttm_rttm\jsp_servlet\__login.java:49:
isResourceStale(java.lang.String,long,java.lang.String) in weblogic.servlet.jsp.StaleChecker
cannot be applied to (java.lang.String,long,java.lang.String,java.lang.String)
(No more information available, probably caused by another error.
Thanks in advance
-Nagaraju

May be the weglogic.jar used in your web application is differ with the current
bea home's.
"Nagaraju" <[email protected]> wrote:
>
Hi,
I am getting the following error when i try to access the web application
deployed
on the weblogic 8.1 sp2 application server. The same works fine on weblogic
7.1.
Please let me know if any of you came across this problem.
C:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_rttm_rttm\jsp_servlet\__login.java:49:
isResourceStale(java.lang.String,long,java.lang.String) in weblogic.servlet.jsp.StaleChecker
cannot be applied to (java.lang.String,long,java.lang.String,java.lang.String)
(No more information available, probably caused by another error.
Thanks in advance
-Nagaraju

Effects cannot be applied

Similar Messages

Maybe you are looking for