Effects dialog no longer shows up!

My iPhoto has the following problem... when I'm looking at a picture, full screen or not the effects dialog doesn't come up if I click on it. Any ideas? Thanks in advance!

Pedro:
Welcome to the Apple Discussions. Have you tried: 1 - repairing disk permissions with Disk Utility and 2 - quitting iPhoto and then trying again? If so then delete the iPhoto preference file, com.apple.iPhoto.plist, from your User/Library/Preferences folder and then launch iPhoto and try again.

Similar Messages

A username no longer shows up after restart

For some reason, a username no longer shows up after restart. I have to login with another account, and then logout of that account. After logout (but not restart) the username shows up! any ideas?

Actually, while looking into your suggestions, I figured out what the problem was.
I had FileVault encryption turned on, and noticed on a FileVault preferences dialog popup that the user that wasn't showing up was not enabled to decrypt the drive. Thus, I had to login with an Admin user account (to decrypt the drive), logout, and then the user could login.
I turned FileVault off (since I no longer really needed it), and then the user account showed up. I suspect that enabling that user account to decrypt the FileVault drive would have worked as well.
Thanks for the tips, nonetheless!

CLUSTER: Remote Apps no longer showing in WebAccess

Hello
We are having a problem with our Remote Apps are no longer showing in WebAccess. I can't recall making a change to have caused this however I see this error in Event Log:
Error in the WMI interface to tsfarm.contoso.local. Check that the machine is running and connected to the network. If the problem persists, reboot the machine.
Error Code: 0x80004005
Log Name: Microsoft-Windows-RemoteApp and Desktop Connection Management/Admin
Source: Microsoft-Windows-RemoteApp and Desktop Connection Management
Date: 11/08/2014 13:00:50
Event ID: 1000
Task Category: None
Level: Error
Keywords: WMI
User: NETWORK SERVICE
Computer: FP001.contoso.local
Description:
Error in the WMI interface to tsfarm.contoso.local. Check that the machine is running and connected to the network. If the problem persists, reboot the machine.
Error Code: 0x80004005
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-RemoteApp and Desktop Connection Management" Guid="{77B0D57B-97B8-4F42-83B0-4FDA12D3D79A}" />
<EventID>1000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000100</Keywords>
<TimeCreated SystemTime="2014-08-11T11:00:50.216025000Z" />
<EventRecordID>269</EventRecordID>
<Correlation />
<Execution ProcessID="4016" ThreadID="2360" />
<Channel>Microsoft-Windows-RemoteApp and Desktop Connection Management/Admin</Channel>
<Computer>FP001.contoso.local</Computer>
<Security UserID="S-1-5-20" />
</System>
<UserData>
<EventXML xmlns:auto-ns3="http://schemas.microsoft.com/win/2004/08/events" xmlns="Event_NS">
<ErrorCode>2147500037</ErrorCode>
<String1>tsfarm.contoso.local</String1>
</EventXML>
</UserData>
</Event>
The situation is as following. All servers are Windows 2008 R2 Enterprise.
We have clustered 2 virtual servers FP001 and FP002, for now FP001 is running all services:
Connection Broker, MSDTC, Fileserver, Printserver, SQL Server.
For the Remote Apps: Apps were made on TS001 and TS002, both these servers are added to a tsfarm on the Connection Broker. A virtual IP was made on the firewall linked to a failover between the two Terminal Servers. This IP was linked to DNS name: tsfarm.contoso.local.
I have checked WMI en COM+ security settings but they all seem fine, nothing changed. I have restarted both Terminal Servers but no effect. Restarting FP001 and FP002 had no effect either.
Any assistance is welcome!

I finally got it to work by going to the WebAccess website, then configuration and changing the source from Connection Broker cb001.contoso.local to Remote App Source tsfarm.contoso.local.
However this is not how it should be done I suppose.. Any idea why linking the farm works but linking the connection broker were the farm has been set as source does not?

BUG: "Save As" dialog is not showing

sometimes i have the problem (since CC) that the SAVE AS dialog is not showing.
the window does not show when i select SAVE AS.
SAVE works.. but i often want to save a new version without overwriting the old.
i don´t know why it happens but it seems that BIG files (panoramas or many layers) are affected more often.
happens 3-5 times a week.
never had this problem with PS prior to CC.
my system:
intel I7 2600K
16 GB ram
GTX 770 (latest drivers)
240 GB SSD (OS windows 7 64 bit)
120 GB SSD (60GB free for scratch files)
2 TB harddisk (1 TB free for scratch files)

Photoshop should not crash even with big files so apparently there is something wrong.
yeah obviously...
Have you tried resetting Photoshop's preferences yet? That sometimes cures malfunctions.
i have resetted the preferences yes.
photoshop should not crash i agree.... but as you can read here in this forum it does.
no software is free of bugs.... and i have worked long enough with computers to burry that expectation.

PC Suite: 7.1.40.6 Calendar no longer showing entr...

Hi
Since I updated to 7.1.40.6, 3 of the 4 Calendar views are no longer showing the entries on each day. The one that is working is the full list of entries. The day / week and month views no longer work.
Also, having opened calendar once, you cannot open it again without re-booting the PC. All that happens is that the CommunicationCentre process takes up somewhere between 50 and 100% of the CPU. Killing the process and existing PC Suite only kind of fixes the problem - it lets the CommunicationCentre process start and the UI display, BUT the process goes straight to 100% CPU and the machine effectively locks up.
Windows XP - SP3
Dell Precision 490
PC Suite 7.1.40.6
Not synching with tool (Notes / Outlook).
I have tried repairing without success.
Please help!.
Andrew

Hey guys,
for me the solution given by olduser1 worked perfectly to solve my problem of connection. So I would recommend that if any of you have problems with the new PC Suite, then you should try to use the cleaner before a new installation.
Anyway, I still have problems in getting music in my mobile external card...Pc Suite only works for dragging music into the phone and even when I set in proprieties that it should save the music in the card, it doesn't do it...any ideas?
Still wondering why Nokia has a Forum when they don't give any answers to the problems of their own products! At least, thank you users for your feedback...
Not at all happy with Nokia products right now.

Once computer memorized, no longer shows up in scanner?

Running 10.7.2 and ARD 3.5.1. Recently, I've found that once I connect to a machine (saving it's credentials in the "ALL COMPUTERS" area), that machine no longer shows up in subsequent network scans. Only after I've deleted the entry does it show back up in scanner. Has anyone else experienced this? I've tried trashing prefs and application support to no avail. Any help would be appreciated!
Thanks,
Phil

hello,
Just an FYI update on my post re: after update to version 2.0.2
my computer no longer sees my iPhone as if it were an external
HD as it had before update using version 1.1.4. Shortly after posting
this problem, I logged into my usual user acct, not the user name specified
with iTunes user acct, and although I had chosen the option of making
iTunes the default music player for iPhone acct, I hadn't indicated
the iTunes default with my usual surfing user acct. Anyway, just after
I posted and logged out of that acct and logged into my usual one
a dialog box opened unsolicited and asked if I wanted to make iTunes
the default for usual acct name. I said no thanks, and now on that user
acct I am able to copy photos from iPhone without sync process as if
the iPhone was an external HD as I could before. Now before I sync
Photos back into the iPhone using the iTunes user acct, i select
the photos I want and put them into the specific folders I have set
up inside the iPhone photos folder and tah da, the folders will have
The pics I want back on the iPhone in addition to the Camera Roll
folder. Still wish I could figure out why the orientation of pics sometimes
requires editing for correction. Knowing how to use a screen shot to
repair orientation has helped alot though. To be continued.

XP no longer shows up as a startup disk

After upgrading to leopard today, my XP partition no longer shows up as a startup disk.
I had/have my windows partition on it's own drive that was NOT created with bootcamp. I pulled my osx disk from the my mac pro and installed windows on the disk i had in bay 2 using 100% of the disk (ntfs). after installing the bootcamp windows drivers, i reinserted the osx disk and all has been well for the last 4 months,... until the upgrade today that is.
Now, when i go to the 'Startup Disk' preference Windows is no longer an option. the disk still shows up in Finder and I can navigate around the file system.
Anyone have any ideas on how I can get it to show up again? I'd really rather not have to reinstall if i can avoid it.
thx.

I have exactly the same problem (well, maybe).
I have installed MacFUSE and ntfs-3g. I don't know if this is of any relevance, because I don't know if it was working directly before I installed them.
I have my OS X and NTFS volumes on the same physical disk. I also had to install Windows twice because I buggered it up the first time (formatted the partition as FAT32 and ran into a bunch of disk errors).
I also notice that in WinClone I have 2 Untitled Volumes at /dev/disk0s3 and /dev/disk1s1. /dev/disk0s3 seems to be the legit Windows NTFS partition, but I have no idea what /dev/disk1s1 is about. I don't know if it's been there all along or not but perhaps it is confusing matters and stopping the legit Windows volume/installation from being detected...? Should that second volume exist at all? It doesn't exist according to the Disk util.
edit: I used fdisk just to have a look at the two untitled partitions.
Jacbook:dev jacteh$ sudo fdisk /dev/disk0s3
Disk: /dev/disk0s3 geometry: 10651/255/63 [171117408 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: 72 368 111 45 - 371 101 51 [ 218129509 - 1701990410] <Unknown ID>
2: 74 67 115 32 - 299 114 44 [ 729050177 - 543974724] <Unknown ID>
3: 65 114 111 32 - 353 115 52 [ 168653938 - 0] Netware 3.xx
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
Jacbook:dev jacteh$ sudo fdisk /dev/disk1s1
Disk: /dev/disk1s1 geometry: 0/4/63 [63 sectors]
Signature: 0x0
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
2: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
3: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
I can hold the option key upon startup and manually enter Windows like that, but I'd prefer to be able to restart and boot Windows without having to hold a key.
Apart from not seeing the Windows boot volume in the system prefs pane, Boot Camp (and the rest of Leopard) has been excellent. I am impressed at the level of apple hardware support for windows. It seems to be much better than most native PC hardware.
I am dying for an answer. It's a fairly minor problem in the grand scheme of things, but **** it's frustrating.
Message was edited by: jacteh

Windows Partition No Longer Shows Up After Accidental Premature Closing of Camptune

Mac OS X 10.7.5
I was running Paragon Camptune to expand my Windows 7 partition. The progress bar reached the end and stayed there for about 30 minutes. The Camptune window was then accidentally closed and Camptune quit itself. I restarted the computer but the Windows partition no longer shows up when I try to boot it, only Mac OSX and Recovery Disk. The Bootcamp drive is no longer accessable from System Preferences, and the Bootcamp partition folder is no longer accessable in the Devices area of Finder. Camptune no loner recognizes that there was a partition. Thus, I am no longer able to access the partition's contents or delete it and make a new one.
It would be preferable if I could fix the partition and have it accessable again, however I have no problem with deleting it and making a new partition. Any advice? Thanks for your time.
Here is the information from the Partition Inspector:
*** Report for internal hard disk ***
Current GPT partition table:
#      Start LBA      End LBA Type
1             40       409639 EFI System (FAT)
2         409640   1151635239 Mac OS X HFS+
3     1151635456   1152904991 Mac OS X Boot
Current MBR partition table:
# A    Start LBA      End LBA Type
1              1       409639 ee EFI Protective
2         409640   1151635239 af Mac OS X HFS+
3     1151635456   1152904991 ab Mac OS X Boot
MBR contents:
Boot Code: Unknown, but bootable
Partition at LBA 40:
Boot Code: None (Non-system disk message)
File System: FAT32
Listed in GPT as partition 1, type EFI System (FAT)
Partition at LBA 409640:
Boot Code: None
File System: HFS Extended (HFS+)
Listed in GPT as partition 2, type Mac OS X HFS+
Listed in MBR as partition 2, type af Mac OS X HFS+
Partition at LBA 1151635456:
Boot Code: None
File System: HFS Extended (HFS+)
Listed in GPT as partition 3, type Mac OS X Boot
Listed in MBR as partition 3, type ab Mac OS X Boot

Hi Eric,
Bootcamp does show up in the disk utility but it is grey instead of black like the Macintosh HD.
The following information is available:
Mount Point: Not mounted
Format: Windows NT File System (NTFS)
Owners Enabled: -
Number of Folders: -
Capacity: 274.55 GB
Available: -
Used: -
Number of Files: -
What might be the best way to continue to repair it. I do not have the option to click on "verify disk permissions" or "Repair Disk Permissions".
Should I clone the hard drive in the target disk mode??
I'm not the best at this stuff so any more advice would be greatly appreciated!
Thanks!

IPod Touch no longer showing up under My Computer

My iPod Touch is no longer showing in the device list under My Computer and as such can't access it to get my photos off it.
It works in iTunes just fine, syncs fine, etc.
If I go to Devices and Printers, it used to be listed under the Devices category as iPod, but now shows under the Unspecified category as Apple Mobile Device USB Driver, so basically a generic device.
I have no devices with exclamation points or any other trouble signs under Device Manager.
Help?

Well, I am not entirely sure what exactly happened but after trying numerous times to reinstall the drivers and getting all sorts of error messages, I finally got Windows 7 to cooperate. The iPod Touch now shows up and is being detected as a digital camera under Devices, and under Computer it is showing up under Portable Devices. If I double-click on it I can view my pictures, transfer them, delete them, etc.

Status page in X3000 no longer showing any data.

Using the latest 1.0.05 firmware on X3000
Status page perpetually shows "Connecting" even though I'm connected.
It no longer shows data such as the Internet IP address, Gateway etc.
Only DNS IP addresses are shown.

Hi,
Try to turn off your X3000 for around 60secs then check again. If it's doing the same issue after doing a powercycle, you may have to perform a hard reset then reconfigure your router.
If everyone needs to believe in something, I believe I'll have another beer..

Ipad app store no longer shows updates

ipad app store no longer shows updates. was working fine until a couple days ago - whwt can I do?

If you are getting the blank app update screen, many people are having this problem over the last couple of days.
According to Fly150 in another discussion, this will work.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store. Apple needs to fix this. It is a workaround only until then.

My MacBook Pro no longer shows up on my devices how do I add it back

Hi,
My MacBookPro no longer shows up on my devices that is associated with my AppleId. Any suggestions? I did go to ITunes and follow the instructions on how to add and delete but it is not giving me the option to add. Just had new hard drive installed and restored from time capsule without any other issues.
Operating system is 10.9.4., Processor 2.7 Ghz Intel Core 17, Memory 16 GB, 1333 MHz DDR3, Storage 526.65 Free out of 999.35 GB. and I did not update to OS X Yosemite. (Because I've heard negative things about IPhoto and I'm working on several photobooks right now.
Not sure if any of the information about my laptop is needed or useful, but thought it may be so am trying to be helpful.
Thanks - ANY feedback is much appreciated.
Frustrated mommy

Hi there,
When you say associated devices - are you referring to authorized devices within iTunes (i.e. devices that are able to access your iTunes account)? Or do you mean your registered devices when you log into your Apple ID on Apple's website?

My WD external hard drive will no longer show up on my Macbook pro.

My WD external hard drive will not longer show up on my macbook pro. The light turns on and you can hear it running but it won't show up either in finder or in the disk utility. This happened a while ago but I really want to get all my photos off the hard drive. Is there anything I can do to get my computer to read it again or get my data off of it?
I don't have access to another Mac to test it.
Thank you

dead sata bridge card. very common problem.
see all about it here:
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
verify HD on another Mac however, if same, dead SATA card most likely

My settings icon is no longer showing. How do get back on my screen?

My settings icon is no longer showing on my iPad screen. I can found it when I search for it. But I how do I get the icon on my screen? Thanks in advance foray help you provide.

Have you checked all your homescreens and app folders for it, also how many screens of apps have you got on the iPad (there is a maximum of 11) ?
You could try a reset and see if you can find it after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Of you could try resetting your homescreens via Settings > General > Reset > Reset Home Screen Layout and see if you can then find it.

My ipod no longer shows in my itunes help, my ipod no longer shows in my itunes help

my ipod is no longer showing up in my itunes, it use to i have tired everything, it will only charge can you tell me what could be wrong and how to fix it please

There may be various issues associated with updating to iTunes 10.4.1 but I was able to fix my problem with iTunes not seeing my devices. iTunes would start fine but connecting my iPhone or iPad would result in the beach ball hang. I noticed the same thing would happen if I tried to click on the MobileMe icon on the status bar so it pointed to a sync services problem. Looking in "~/Library/Application Support/SyncServices" I saw some "ErrorInfo.txt" files with "SyncDataDirectoryCorruptedException, reason = The Admin Database does not exist. It should have been created by upgradedb."
I had already reinstalled Lion to get iTunes10.4 back which didn't help so that step may not be necessary but I restored "~/Library/Application Support/SyncServices/Local" from my Time Machine backup from the day before the 10.4.1 update and that fixed my problem.
I've re-updated to 10.4.1 and everything still works.

Effects dialog no longer shows up!

Similar Messages

Maybe you are looking for