Effects missing from clips after PP update

I have asked this question before, but nobody responded with any useful suggestions. Let me try again.
I spent an incredible amount of time keyframing Beauty Box effects on a timeline in Premiere Pro 8.0 during fall 2014. When I upgraded to 8.1, all the effects are simply gone from the timeline. To be clear, there are no "missing effects" messages; they are just gone.
Beauty Box is still installed and is an effect I can add to my clips with ease, but somehow, the update stripped all the effects off the timeline when it the project is updated to the new version.
Luckily, there is one machine at work that is still on 8.0 and recognizes my old project correctly. But - PP crashes literally every single time I try to adjust the Beauty Box effects that I spent many, many hours tweaking already.
Exporting an AAF also doesn't work: PP crashes every single time I try.
Short of adding the effect all over again to every clip and starting from scratch, is this a known issue to Adobe and is there a solution? I hesitate to upgrade Beauty Box, as updating any software in the middle of a project is a bad idea (see above).
And here are bonus issues: I use a Saffire Pro 14 for audio on my system. Everything was fine until the other day, when it stopped playing AIFs. If I try to import one and place it in the source monitor, everything locks up and PP crashes. There have been no hardware or software updates in these areas for literally months (aside form "upgrading" to the latest PP version about a month or so ago). The files play normally outside of PP. The solution to this, I found after a good bit of experimenting, is to switch to the Adobe audio driver. But why?
Also, I have a two monitor system. The right monitor is my program view. I usually set it nearly full screen (but not quite). Suddenly, it started taking up the entire screen with no borders (and no accessible controls) yesterday. I can't find a command to restore it to normal. (~ doesn't do it).
Another frustrating issue: warning boxes that normally appear on top of everything onscreen have begun appearing behind other PP windows, giving me the annoying system error noise whenever I try to touch anything. the only way I have found to reveal them is to switch to another program then toggle back to PP.
All of this has made it virtually impossible for me to get any work done on this project. Gotta say I'm not loving PP right now.er literally a month,
Message was edited by: Charles Mumford
UPDATE - after literally a month, all my missing effects re-appeared on my timeline tonight. Why? Who knows? But I'm glad they're back.

I have almost the same problem. As a workaround, I can check "sync all music" rather than "sync checked music" in iTunes. (By the way, it worked for a couple weeks and now it doesn't). I'm fortunate that all my music fits on my touch (though just barely). The only album that still exists on my ipod (officially anyways) is one that I bought from iTunes after upgrading.
Also, I listen to a lot of podcasts, and I haven't figured out how to make that work (they disappeared too).
Anybody know how to get back to a position where I can decide what I want for music and don't have to put everything on my touch?

Similar Messages

Side bar missing from iTunes after the update o oct '14

Please let me kow if there is side bar option in Itunes after the update.

It's not missing. It's no longer used as you remember it. But there is no loss of functionality if you take some time to work with iTunes.

Why are key functions, such as the "back" button, missing from Firefox after involuntary update?

I noticed that there is a new version of Firefox on my computer, different from the last time I had my computer on. There are few issues that I have noticed thus far. 1) The back" and "forward" buttons are disabled. 2) Whenever I open a website the address bar is missing the URL. 3) Firefox doesn't save my tabs and I lost all of my tabs from the previous session.
Please help me. This makes browsing a frustrating task.

Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
You can check for problems with the places.sqlite database file in the Firefox Profile Folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Corrupt_localstore.rdf
It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
*http://kb.mozillazine.org/Multiple_profile_files_created
If you keep having problems with your current Firefox Profile Folder then try to create new profile or reset Firefox.
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
You can also try to reset Firefox:
*https://support.mozilla.org/kb/Basic+Troubleshooting

Photos missing from iPad after ios8 update

MY iPad is three years old, and all my travel photos are ( were) on it. I updated to iOS 8 today, now there are no photos visible prior to man 2015. Any suggestions, and no I don't own a Mac , and I never actives iCloud before.

Obvious: restore from the back up you made prior to upgrading.
If that's not possible:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Im from Philippines and my iphone is from Japan after I updated it to iOs 6.1.3 it wont activate it says ''Activation Error Please Contact Customer Care'' what does it mean? How can I activate it? Please help me.

Im from Philippines and my iphone is from Japan after I updated it to iOs 6.1.3 it wont activate it says ''Activation Error Please Contact Customer Care'' what does it mean? How can I activate it? Please help me.

You can NOT unlock it. Only the carrier it is locked to can legally authorize unlocking it and the Japanese carriers will not do so.
In order to be using it previously with a non Japanese carrier, the phone had to be hacked to illegally unlock it. You can not get help here.
Buy a new phone you can use.

TS2755 Can't send messages via iMessage from iPad after iOS6 update. What steps can I take to begin sending messages again?

Can't send messages via iMessage from iPad after iOS6 update. What steps can I take to begin sending messages again?

HI,
So you have updated past this point ?
http://support.apple.com/kb/TS5419
There also seems to be no issues listed here.
http://www.apple.com/support/systemstatus/
8:44 pm Friday; April 25, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Folders missing from Bookmarks after update to Firefox 9

First, system info:
I'm on Mac OS 10.5.8
I was using Firefox 3 until yesterday when I updated to 9. Had no apparent problems with bookmarks after the update but I had not closed the session; it was only after starting up this morning that all my bookmark folders are missing from the Bookmarks Menu.
I've been through all the "lost bookmarks" sections of Firefox - no answers there to my specific problem.
Most of them focus on bookmarks being completely missing - but in my case it's only the Folders that are missing.
Here are at least some of the pages I've looked at and been through all the suggestions that were relevant:
http://kb.mozillazine.org/Lost_bookmarks
https://support.mozilla.org/en-US/kb/Lost%20Bookmarks
http://kb.mozillazine.org/Lost_bookmarks#Bookmarks_missing_after_restarting
https://support.mozilla.org/en-US/kb/common-questions-after-upgrading-firefox-36
https://support.mozilla.org/en-US/kb/latest-firefox-issues
There was a momentary power-down yesterday, but the folders were still there when the power came back on, so that's not it.
There was one anomaly with the way my bookmarks WERE. That is, when I selected Bookmarks from the top navigation bar, go down the drop-down past Bookmarks Toolbar, instead of all my folders being displayed there, I'd have to go to Bookmarks Menu and then to a side panel of the Menu which showed a
folder saying All Bookmarks and from there I'd have to go to another side panel that opened off that to access the list of all my folders and run down to select one. This strange functionality came after some previous update, never could fix that and got no help with it. So I just put up with having more mouse work to get to my sites.
This is a serious problem for me - I am in training on SEO, internet marketing, Wordpress, etc plus running another business. EVERYTHING I rely upon for my work was meticulously organized into those folders, which now
seem to be gone.
Are there any seriously technical people in Firefox/Mozilla who can go deeper than the stuff suggested on their websites?

You can make a backup copy of all JSON backups in the bookmarkbackups folder to be sure not to lose any of them. There should be 10 in Firefox 9 versions.
On (newer) Mac OS X versions with the Time Machine there is the possibility to restore an older copy of the places.sqlite file. I don't know if that is possible on your computer.

Photos missing from iPhoto after operating system update

I recently updated my Macbook pro operating system to OS X version 10.10.1 and iPhoto to version 9.6 (910.29). After the updates, most of my albums in iPhoto are empty and in the photos folder, all photos pre-dating 2010 are missing. How do I recover these photos?

Obvious: restore from the back up you made prior to upgrading.
If that's not possible:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Simple title shows up as missing compound clip after 10.1 update

None of my projects had any missing files prior to updating to 10.1. It all went quite smoothly with the exception of one project that has three or four clips that now show up as compound clips, but they were not compound clips in the original. One is a simple scrolling title. If I open the supposed compound clip in the timeline it looks like this:
    It is "attached" in some way to the previous still image and in fact if I return to the main timeline and select the clip and expand it by clicking and dragging the left handle so as to make the title longer it will actually roll into the previous clips and then the red "missing" compound clip will contain previous clip sections. Oddly if I play the project it all plays just fine and there are none of the clips that are marked as missing cause a problem.
     Has anyone seen this kind of behavior before?
    My product list is out of date....

You may soon develop a reputation for knowing something about this program, Tom.
Thanks very much. Now to research on why a project that was in the Updated Projects "folder" and then dragged to an event has disappeared entirely...but I'll post that question if I can't find the answer.

Files missing from library after archive and install

Hi forum folk
any help you could give would be much appreciated.
I can't seem to verify my permissions on HD. I have run disk utility both from finder and from my OSX startup disk and consistently get the error message "Disk Utility has lost its connection with the Disk Management Tool and cannot continue." I then reinstalled the operating system all together making sure to archive and install as well as archive previous network and preference settings. This means I am running 10.3.4 at the moment (and I can't verify any of the software updates at the moment). After reinstalling I still cannot verify my permissions, so now I am trying to back up all my files so that I can reinstall the OSX again, erase everything, and start from scratch. But I'm running into some very strange problems while doing this. select files are missing from ~/library. there is no Safari file, for example. I tried looking in HD/previous systems/library where my library files were saved before I reinstalled the operating system but there is no such folder in there either. this means all of my bookmarks are gone. additionally, under library/preferences (in both the old and new library folders) there is no file named com.apple.itunes.plst. so all of my itunes playlists are gone as well. these are the only missing files I have found thus far and i can't explain why they selectively would not have been saved after the archive and install. Everything else seems to be intact. Any ideas?
thanks
jb
powerbookG4 Mac OS X (10.3.9) running 10.3.4 at the moment - can't verify permissions on 10.3.9

jbeep:
my HD has a capacity of 8.85 GB available. When I reinstalled panther I had little more than 3 GB available (I deleted a bunch of unneeded things since then)
Thanks for this update. What is the total formatted capacity of your HDD? I ask because I suspected that you might be cutting it pretty close. The rule of thumb is that you should have 10-15% of your total capacity available as free space. My personal rule is 15%-20%. This allows for more efficient perfomrance of OS X.
I am in the process of backing up everything on my seagate combo USB 2.0/firewire 200 GB external (I am using the firewire cord)
Having an up-to-date backup is one of the primary rules, often observed more in the breach than not. Since you have an HDD that supports Firewire, I suggest that you make a bootable clone of your entire HDD using SuperDuper. You can then use this backup as an emergency boot drive. However, it must be Firewire, as PPC Macs don't boot from USB devices.
I also have heard that it is advisable to reinstall the OS "every now and again" and I hadn't done this for at least two years. was I ill-advised?
Most experienced Mac users never re-install, except under dire circumstances. Since installing my new HDD in this computer I have never re-installed. Re-installation is the utlimate intrusive measure, and it exposes one to all kinds of issues, from lost data, to flawed installaton, to installations that fail midstream. Re-installation is not an effective maintenace procedure. Here are some helpful links in terms of maintenance:
Mac OS X 10.3/10.4: System maintenance
Macintosh OS X Routine Maintenance
Maintaining OS X.
I'm going to restart now and try and verify my permissions again using the procedure on the above link. I'll let you know what happens.
Instead of verifying permissions, just go ahead and Repair Disk Permissions. Verifying permissions does nothing, and wastes your time, as it is difficult to tell whether you need to repair, and you have to repair anyway.
Do post back with an update of your progress and any further questions or comments.
Good luck.
cornelius
Message was edited by: cornelius

IPhoto events and pictures missing from iPhoto after restoring new hard drive and upgrade to iLife11

My iPhoto events and pictures are ALL missing from my iPhoto Library after I tried restoring my programs on a new hard drive AND upgrading to iLife11! Over the last few months, I upgraded my 2008 Macbook Pro's hard drive from a 250 GB to a 500 GB hard drive and since then have been manually installing and restoring programs and software. I decided to do things manually because I had problems with doing Time Machine backups/restores in the past, so before I upgraded the drive, I manually saved everything to a Western Digital MyStudio 1 TB hard drive that I had just for the purposes of a second back up. Anyway, I tried importing the pictures onto the new library, but couldn't find the hard copies at first, so that didn't work. I then tried deleting the iPhoto Library that came with new operating system, then copying my old backup onto the new hard drive...that didn't work either. However, when I right clicked on the iPhoto Library icon on my external hard drive (the original) and clicked on "show package contents," the folder not only contained the originals, but they were still organized by year and event just as I had them originally!
So, then I thought "why don't I try just importing the pictures directly into the new iPhoto Library!"
I tested it out, and sure enough, it worked! I then tried importing an entire folder (which, was actually the name of the event), and again it worked! So, I literally clicked and dragged my entire 2007-2009 library of pictures (which was about 35 GB) back into my iPhoto Library! AND, this only took about 30 minutes to download, enough time for me to write this post and the following instructions to Recap:
          1. Open your new iPhoto Library
          2. Go to wherever your ORIGINAL iPhoto Library is saved/backed up, then Right-click (or Control click) on the iPhoto icon
          3. Click on "Show Package Contents"
          4. Go to the folder called "Originals" or "Master"
          5. Click and drag everything INSIDE the folder (not the folder itself) to your new iPhoto Library
          6. DO NOT try Importing from inside iPhoto! For some reaseon, iPhoto can't see these images, but I promise, they're there!
I assume this could work on other iLife programs, but luckily I have MobileMe and my iCalendar updated itself, though I did have to do some tweeking...
Hope this helps other people out, GOOD LUCK!

I'm re-posting the answer to this problem so I can show it has been answered:
Open your new iPhoto Library
Go to wherever your ORIGINAL iPhoto Library is saved/backed up, then Right-click (or Control click) on the iPhoto icon
Click on "Show Package Contents"
Go to the folder called "Originals" or "Master"
Click and drag everything INSIDE the folder (not the folder itself) to your new iPhoto Library
DO NOT try Importing from inside iPhoto! For some reason, iPhoto can't see these images, but I promise, they're there!
          GOOD LUCK!!!

Trouble deleting only rejected clips after imovie update

When i send rejected clips to the trash, it pulls more of the original video with it. How can i keep this from happening? Only started with the new Mavericks update.

I've seen one suggestion relating to Revealing the Clip in the Finder. Try this:
Go to the Reject Clips by clicking on the pulldown menu at the bottom where it says Show: (choose Rejected Clips Only). Then <CTRL> click on on of the red striped thumbnails choose Reveal in Finder. When the Finder window launches, your clip will be highlighted. Select it and drag it to the trash.
Quit iMovie, then relaunch it and go back to the Show: (Rejected Clips Only) see if that clip is now missing from the list of Rejected Clips. If this works and your Project file still plays back successfully I would say it's safe to continue deleting as needed. But if you have some problems and the Project has been affected there might be another reason you cannot delete the clips.
iPhoto Videos are not deletable in the traditional iMovie Rejected Clips kind of way. They are under full control and jurisdiciton of iPhoto. And as a result, iMovie is not allowed to do anything other than 'copy' or re-use them in a Project. Deletion of iPhoto Videos in iMovie will not work. So your only real option is to try deleting them from iPhoto instead. So just be aware of where your video clips are located in the iMovie Event Library and everything should be OK.

Can not print from preview after Lion Update

I can't print from preview since I updated to Lion. After I hit command P or select print from the file tab preview totally freezes up and gives me the spinning wheel of death until I force quit preview. I have no issues printing from anything else, such as word, excel, web pages. So I don't think it's a printer/driver error. Help?

I would still mention what printer you have and make sure you have the latest printer driver.

HTML animation effects doesn't work after last update

After last update my html animation that have different effects with different time: fade, translate, rotation, scale, ecc... plays but some effects doesn't play.
Various animated png in html project appears immediatly without shows transitions or deformations.
I have made html animation with Motion Composer that have time curve for each effect.. and all work fine with previous dps desktop tools...
I don't use Hedge because folios with hedge animation is mooooooooore large than folios with motion composer animation.
A single complex animation (10 .png(1024x768) with multipe effects fo each) made with composer produce a 1MB folio...
The same animation made with Hedge produce more the 100MB folio.
why new version of dps don't show my html anim correctly ? I hope adobe correct this proble.

We just released an update to the DPS tools that addresses the issues around HTML/iFrame and buttons in release 25. You can download the updated components by following the links at http://www.adobe.com/go/learn_dps_install_en.
Neil

Cross-fade effect missing from transition effects

I used to export slide-shows from image folders with QuickTime, and on Tiger and PowerMac PPC G4 that worked fine choosing cross-fade transitions.
There was also the possibility to export slide-shows with Graphic Converter (using QuickTime effects), and the cross-fade transition was available.
Now, with Leopard and QuickTime 7.5 the cross-fade (aka dissolve transition) is missing from the transition effects. Is that a bug ? Is there a way to recover that transition effect ? I re-installed QuickTime, but that didn't changed things.
Thanks for any input...
N.

I still have my PowerMac G4 with all things installed, so I checked in QuickTime the slide-show export, and it doesn't have options for transitions in the effects. Oups !
So I guess it's only related to Graphic Converter 5.9.5 where in the transitions the cross-fade isn't available anymore when I upgraded to Leopard. Maybe I should upgrade Graphic Converter.
Anyway, thanks for the iPhoto tip, but I can't find where I can change the default settings...
N.

Effects missing from clips after PP update

Similar Messages

Maybe you are looking for