Effects not automatically rendered in background while working on other things in v6.03?

Hi all,
I am relatively new to PP CS6, so pardon me if this has been asked before. I've searched thoroughly on the net - there are similar questions, but not identical ones.
i'm using a pretty powerful rig to edit my videos and here are the specs :
i5 2500k
16gb ram, allocated 14gb to PP, set to performance mode
gtx 560ti with 1gb vram, set to MPE mode from the hack
video source : iPhone, Galaxy Note 1080p, Canon 550D DSLR 720p videos
[img]http://i.imgur.com/aeERL.png[/img]
As seen in the image above, there's a small 'red' unrendered area in the sequence. I have added the warp stabilizer effect to a few of the clips, and most of them turned yellow after awhile, which means i can playback the seq smoothly without choppiness.
However, at times, I'm not sure why these effects, even AFTER being rendered, still shows as RED and would be extremely choppy when i play it. CPU usage rams up when i first add it and it does the processing. As of now, it is idling and does not finish rendering the RED areas. is it supposed to be normal?
I have to hit render entire work area for it to finish rendering all areas (which means I cannot do other stuff in the meantime!), and rendering takes EXTREMELY long. for instance, a 2 minute iphone clip takes around 40minutes to render ( minimal effects ).
i thought the MPE might be a problem, so i tried disabling it and ran on software. turns out it's even slower than usual.
any idea what i can do to make my CPU work full force in the background to render those RED areas while i'm editing other parts of the clip?
Thanks!

1st, go to the CS5 Benchmark http://ppbm5.com/ and view the results... an i5 computer is not "a pretty powerful rig" especially for DSLR video
Also, Iphone won't easily edit http://forums.adobe.com/thread/881246
-and http://forums.adobe.com/thread/1011411?tstart=0
-and a fix http://forums.adobe.com/thread/934466
How many hard drives do you have... and do you have AT LEAST two separate hard drives?
Read http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html to help understand rendering

Similar Messages

  • I changed my sim on my iPhone n reconfigured iMessage, it configured with my number but when i sign in with my apple id it says username/password is wrong while in all other things like FaceTime, App Store it worked with the same id and password

    i changed my sim on my iPhone n reconfigured iMessage, it configured with my number but when i sign in with my apple id it says username/password is wrong while in all other things like FaceTime, App Store it worked with the same id and password..
    can anyone help me to solve this issue

    i just opened my ipad, started my apple account/I.D. and realized I put the wrong e mail. I was having trouble correcting my I.D on the Ipad so I went to my laptop and make the proper changes/slash e mail address I wanted for my apple ID. I got back to my ipad and try to download an app I can't because I have to sign in my apple account and I can't because it still has the irrelivant I.D/email address..
    So, i did what you said.. went to setting>app store> tapped on my e mail.. it asked me to sign in (with my invalid emails address showing). I signed in with the password I had created. It said "incorrect".. I went to reset password. I reset password, tried to sign in and it says again "unvalid password".. this is getting irritating.  I have been asking and no one knows what to do.

  • HT1688 My iphone 5 won't charge and it's in perfect condition, I dont drop it and it's not cracked. I tried multiple chargers, none of them are damaged and my outlets work with other things so the problem is my phone. What's wrong with it and what should

    My iphone 5 won't charge and it's in perfect condition, I dont drop it and it's not cracked. I tried multiple chargers, none of them are damaged and my outlets work with other things so the problem is my phone. What's wrong with it and what should I do? Please help me I need my phone for work.

    Make sure there's nothing blocking a contact in the charging port of the phone.

  • Safari 8.0.2 does not play any sound (but sound works in other apps).

    Safari 8.0.2 does not play any sound (but sound works in other apps).

    Hi Michaelgst,
    Welcome to the Apple Support Communities!
    I understand that you do not hear sound from Safari on your computer but you do hear sound in other applications. There may be several troubleshooting steps I would suggest to troubleshoot this situation. 
    The first troubleshooting steps I would recommend would be removing any unsupported third-party add-ons. Please use the information and instructions located in the attached article to complete this process. 
    Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues - Apple Support
    Best regards,
    Joe

  • Buffer table not up-to-date error while working with local SRM PO

    Hi all,
    We are working in SRM 7.0  with extended classic scenario.
    I faced an issue while working with local SRM PO. Iam getting a dump while doing changes in SRM PO.
    Dump says that "Buffer table not up-to-date". Please find the detail dump error below :
    http://cscgsapndc34.nwk.amer.csc.com:8114/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
    UNCAUGHT_EXCEPTION
    Buffer table not up-to-date
    Function: BBP_PD_ABORT of program SAPLBBP_PDH
    Form: ABORT of program SAPLBBP_PDACC
    Form: ACCOUNT_INTERNAL_SAVE of program SAPLBBP_PDACC
    Function: BBP_ACCOUNT_INTERNAL_SAVE of program SAPLBBP_PDACC
    Form: PROCDOC_INTERNAL_SAVE of program SAPLBBP_PD
    Form: STATUS_SET_AND_INTERNAL_SAVE of program SAPLBBP_PD
    Form: PROCDOC_UPDATE of program SAPLBBP_PD
    Function: BBP_PROCDOC_UPDATE of program SAPLBBP_PD
    Method: /SAPSRM/IF_PDO_UPDATE_BUFFER~SUBMIT of program /SAPSRM/CL_PDO_UPDATE_BUFF_PO=CP
    Method: /SAPSRM/IF_PDO_BASE~SUBMIT_UPDATE of program /SAPSRM/CL_PDO_BASE===========CP
    http://cscgsapndc34.nwk.amer.csc.com:8114/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
    If anyone of you already came across this type of dump error can you please let me know what might be the possible reasons for the same .  Request your kind help in this regard.
    Thanks in advance.
    Regards,
    Kalyani

    There could be many issues..
    or some data issue.
    can you recreate the same issue you can fix it.
    it could only one incident so you should thoroghly check what piece of data is wrong.
    what actions are you doing in the purchase order.
    Note 1580496 - Purchase order Buffer table not upto date dump in change ver
    Symptom
    1.Create a change version on any Purchase order.
    2. Edit quantity of any item
    3. Dont press 'Enter key'
    4. Clickk on Order button.
    Application gves dump 'Buffer table not upto date'
    but it is very difficult to say what is the issue. request your technical resource to look your dump.
    if you recreate the issue half of the problem resolved.

  • I bought the company unlocked phone from apple store Canada. It was originally loaded with software 4.2 and was working fine here in SaudiArabia.  Yesterday I updated with IOS 5.0.1.  Now it is showing that sim is not valid.  The same sim works in other p

    I bought the company unlocked phone from apple store Canada. It was originally loaded with software 4.2 and was working fine here in SaudiArabia.  Yesterday I updated with IOS 5.0.1.  Now it is showing that sim is not valid.  The same sim works fine in other phones.

    Here's and update on my problems and here are are some screen shots of the types of problems I've been having since the v5.0.1 update. Keep in mind these are native apps and I have tried the rebuild phone crap many times, nothing helps.
    This is screen shot of a what happened when I tried to use my camera one day, both the front and back cameras were all black. I had to power cycle the phone to get rid of this problem. The cameras appeared to be working correctly, I could focus and zoom but it was all black.
    Here is an image of what happened when I searched for something in a map. This is after I picked the choice I wanted, the keyboard disappeared but the list didn't. I had to force close the app and restart it for this problem to go away. Who knew five bars on ATT was possible.
    And finally this is the messaging app, although you would not know it. I had to return to home screen (after a long pause for it to process the button push) and return to the messaging app. This happens all the time with the messaging app and the notifications sounds drive me crazy. If  i'm using the phone, say browsing the web and I get an incoming message its almost 100% of the time the messaging app will screw up. The sound will play at the wrong time or not at all, message will show up in notifications and diasapear in message app or Ill have a problem like this:

  • Snap a photo instantly while working in other apps.

    I have my external iSight camera facing a bird feeder just two feet away. I'd love to be able to instantly, at any time, snap a photo by clicking on an icon in the menu bar or desktop, without having to launch an app.  Does anyone know if there is software avaialble that can do this?
    Thanks!

    The iSight camera must have an application to drive it.  It's not a "camera" in the traditional sense.
    You may want to consider a low-latency means of activating the external iSight.  One way that sort of meets your needs would be a Service that takes a snapshot.  First,  install the command line tool Image Snap from http://iharder.net/imagesnap.
    Then use Automator to create a new Service: Select the Service template, then add the Run Shell Script action.  Modify the upper (Service input) section so that
    Service receives ... no input
    and modify the Run Shell Script action so that instead of the default "cat" it reads
    /usr/local/bin/imagesnap -d iSight
    [The "-d iSight" specifies an external iSight as the input device, at least on my MacBook Pro with an external iSight attached.  Image Snap calls the MBP's built-in camera "Built-in iSight".  The Image Snap read me file will guide you through other options you may want.]
    But it's not going to be instant.  With an iSight, there's always going to be a 2-3 second delay as the camera powers up and focuses on the birds.  It's only if the camera is on all the time--and perhaps controlled by the sort of motion-detection application Ralph Johns mentions--that the iSight is going to be able to capture images more or less "instantly" (which may also in any event still take a second or two depending on how the application works).

  • Can your DAQ cards do TRUE async buffered daq while Labview does other things?

    I need to perform analysis on and save aquired data while the DAQ card is simulataneously and independently performing another scan session, initiated by an external trigger. I've found what look to be virtual or pseudo asynchronous buffered daq functions, but is the 6034-E or any other DAQ card capable of true async buffered aquisition via DMA while Labview is executing other things separately?

    testy,
    Yes, you can acquire, analyze, and save data simultaneously. There are examples that illustrate this that ship with LabVIEW (Help > Find Examples). Any buffered data acquisition is capable of this. Once the buffered acquisition is setup it is going to continue to sample the channels specified and put the data into memory via DMA (if available). Inside the while loop of your program you will do a read which reads some data from memory and brings it into LabVIEW's memory. So if in this while loop you also do some analysis and stream to disk that isn't a problem as long as you call your read function fast enough that your buffer doesn't overflow (the buffer that your DAQ card is shoveling the DMA transferred data into). All of our DAQ boards use DMA (if a
    vailable) by default for data transfer.
    Ames
    Applications Engineering
    National Instruments

  • Smart Object Effects Not Shown in 'Play Slide' But Shown in Other 'Play' Modes?

    Hi,
    In Captivate 7, effects which I add to smart objects using 'Add Effect' in the Effects tab do not show when I 'Play Slide' but do show in any other 'Play' mode e.g. 'Play Project'.  Any thoughts would be very much appreciated.
    Thanks
    Richard

    F3 Play Slide is only going to show you what you can see in Edit mode.  It only moves the frame cursor across the timeline but does not publish the project to an output.
    You can see a Live Preview of the effect applied to a given object by opening the Effects tab (Window > Effect), selecting the object on the slide, and then clicking Live Preview button.
    But the best way to see how everything works is to either hit Cntrl + ENTER to publish and preview the project, or else hit F10 to publish to browser.
    Rod Ward
    http://www.infosemantics.com.au/troubleshoot-adobe-captivate

  • Request.getParameter comes blank on some browser, while works on other

    Hi,
    Need urgent help to rectify thie problem
    I am accessing a application hosted on Weblogic8 SP2 as WAR file
    In this application I am able to login and search result and go to home page of one the search results.
    But on some other machine on same IE6 or Firefox the forward from search results to Home page stops in a URL which is being used in middle to forward.
    URL (also used in JSP pasted below) is created in action class called by search result link.
    This is how it is impleted.....
    I have a replicated link with unique Id on Search result page which forward me to this JSP
    <head>
    <SCRIPT language="JavaScript">
    function submitform()
    var urlString = "<%=request.getAttribute("urlString")%>";
    document.form1.action =urlString;
    document.form1.submit();
    </SCRIPT>
    </head>
    <body onload="submitform();">
    <form name = "form1" method = "POST">
    <input type = "hidden" name="myVariable" value="myValue"></input>
    <input type = "hidden" name="empID" value="<%=request.getAttribute("empID")%>"></input>
    <input type = "hidden" name="ownerName" value="<%=request.getSession().getAttribute("ownerName").toString()%>"></input>
    </form>
    </body>
    </html>
    Once this JSP is submitted this URL has to call a action class to validate some session attribute and the hidden value in JSP above named as "myVariable" which is checked for some "myValue". So it will then Forward to Home Page.
    On some machines IE6 or FireFox this is working as expected and logs show correct results all through.
    But some other machines with same Browser, the "myVariable" value in action class is coming blank and so request stops at the URL submit in above JSP. However no errors or Exceptions are thrown.
    Please help in this issue if some one can suggest any solution or way to dig up more on this.
    Also if I havent explained clearly by chance, then pls give me another chance to explain more.
    Thanks a lot for all your efforts.

    Hi,
    Thanks for reply,
    Nop our WAR do not have any filter. and We used IE 6 and FireFox 2 on both machines. We also saw the Options for both browser and matched these for both machines. They were same.
    The javascript we used was to submit the form on click of a Href. but it do not use any JSP element. We had just set a value in <input type="hidden"...
    and this value we fetch in Java class by saying request.getParameter("name");

  • IPod Touch - not recognized on my com but works on others

    I am so stumped... I plugged my iPod Touch (1st gen) into my computer as I always do and it didn't pop up in iTunes. I checked my computer (windows 7 - 32bit) and it wasn't showing up there either. Totally out of the blue, nothing changed, it just suddenly wasn't being recognized. I tried plugging in my shuffle, same thing. I was able to reformat my shuffle though through another computer and it is now working on my computer again. For whatever reason though I can't fix my touch!
    I have done everything the apple support has suggested. When I started the ipod in safe mode it did pop up in my itunes but when I tried to reformat it I got an error that said I couldn't reformat it. So I unplugged it and plugged it into my boyfriends computer. It popped up in iTunes and was able to be reformatted. So the whole iPod has been reset but it STILL won't show up in my iTunes or My Computer. I just don't understand how it could be recognized on one computer but not on another, especially when I have another ipod (shuffle) that does connect.
    Any suggestions? Has anyone else experienced this?
    Thanks!!!!

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    Pay particular attentions to the section on the Apple Mobile Device service.  That is what the computer uses to see iOS devices like the iPod touch, iPhone and iPad.  The other iPods like the Shuffle use differend means.

  • HT5361 Mail not responding with one user, but works with other user. Tried reinstalling Mountain Lion OS but did not work.

    Mail not responding under one user. Need to Force Quit to get out of it. My mail works when I log on as a user. Downloaded the latest Mountain Lion updates and reinstalled Mountain Lion as per Apple Phone Support instructions
    TIA

    Thanks for reponding. Here is the Console display. I hope this can help.
    2013-09-08 8:11:49.646 AM Mail[449]: Using V2 Layout
    2013-09-08 8:11:50.104 AM Mail[449]: Cannot lock focus on image <NSImage 0x7ffefba4c1a0 Size={0, 0} Reps=(
    )>, because it is size zero.
    2013-09-08 8:11:50.107 AM Mail[449]: (
              0   CoreFoundation                      0x00007fff970d5b06 __exceptionPreprocess + 198
              1   libobjc.A.dylib                     0x00007fff96aab3f0 objc_exception_throw + 43
              2   CoreFoundation                      0x00007fff970d58dc +[NSException raise:format:] + 204
              3   AppKit                              0x00007fff8e3ec21c -[NSImage _lockFocusOnRepresentation:rect:context:hints:flipped:] + 334
              4   AppKit                              0x00007fff8e3ec0b8 __51-[NSImage lockFocusWithRect:context:hints:flipped:]_block_invoke_0 + 82
              5   AppKit                              0x00007fff8e33b406 -[NSImage _usingBestRepresentationForRect:context:hints:body:] + 170
              6   AppKit                              0x00007fff8e3ec056 -[NSImage lockFocusWithRect:context:hints:flipped:] + 210
              7   AppKit                              0x00007fff8e3ebf76 -[NSImage lockFocusFlipped:] + 125
              8   AppKit                              0x00007fff8e1cf2b0 -[NSGradientColor _updatePatternImage] + 121
              9   AppKit                              0x00007fff8e1ceeff -[NSGradientColor _updatePattern] + 487
              10  AppKit                              0x00007fff8e1cec8f -[NSGradientColor set] + 26
              11  AppKit                              0x00007fff8e44460c -[NSTableView drawBackgroundInClipRect:] + 657
              12  AppKit                              0x00007fff8e443d0f -[NSTableView drawRect:] + 1086
              13  AppKit                              0x00007fff8e328064 -[NSView _drawRect:clip:] + 4217
              14  AppKit                              0x00007fff8e3266c1 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 1656
              15  AppKit                              0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
              16  AppKit                              0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
              17  AppKit                              0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
              18  AppKit                              0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
              19  AppKit                              0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
              20  AppKit                              0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
              21  AppKit                              0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
              22  AppKit                              0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
              23  AppKit                              0x00007fff8e3246f2 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 817
              24  AppKit                              0x00007fff8e324143 -[NSThemeFrame _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 314
              25  AppKit                              0x00007fff8e31fd6d -[NSView _displayRectIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:] + 4675
              26  AppKit                              0x00007fff8e2e9c93 -[NSView displayIfNeeded] + 1830
              27  Mail                                0x0000000105859377 Mail + 189303
              28  AppKit                              0x00007fff8e2e91cc _handleWindowNeedsDisplayOrLayoutOrUpdateConstraints + 738
              29  AppKit                              0x00007fff8e8b4901 __83-[NSWindow _postWindowNeedsDisplayOrLayoutOrUpdateConstraintsUnlessPostingDisabled]_block_ invoke_01208 + 46
              30  CoreFoundation                      0x00007fff9709c417 __CFRUNLOOP_IS_CALLING_OUT_TO_AN_OBSERVER_CALLBACK_FUNCTION__ + 23
              31  CoreFoundation                      0x00007fff9709c381 __CFRunLoopDoObservers + 369
              32  CoreFoundation                      0x00007fff970777b8 __CFRunLoopRun + 728
              33  CoreFoundation                      0x00007fff970770e2 CFRunLoopRunSpecific + 290
              34  HIToolbox                           0x00007fff96d70eb4 RunCurrentEventLoopInMode + 209
              35  HIToolbox                           0x00007fff96d70b94 ReceiveNextEventCommon + 166
              36  HIToolbox                           0x00007fff96d70ae3 BlockUntilNextEventMatchingListInMode + 62
              37  AppKit                              0x00007fff8e2e6533 _DPSNextEvent + 685
              38  AppKit                              0x00007fff8e2e5df2 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 128
              39  AppKit                              0x00007fff8e2dd1a3 -[NSApplication run] + 517
              40  AppKit                              0x00007fff8e281bd6 NSApplicationMain + 869
              41  libdyld.dylib                       0x00007fff8d5427e1 start + 0
    2013-09-08 8:11:50.140 AM Mail[449]: Cannot lock focus on image <NSImage 0x7ffefb814390 Size={0, 0} Reps=(
    )>, because it is size zero.
    2013-09-08 8:11:50.143 AM Mail[449]: (
              0   CoreFoundation                      0x00007fff970d5b06 __exceptionPreprocess + 198
              1   libobjc.A.dylib                     0x00007fff96aab3f0 objc_exception_throw + 43
              2   CoreFoundation                      0x00007fff970d58dc +[NSException raise:format:] + 204
              3   AppKit                              0x00007fff8e3ec21c -[NSImage _lockFocusOnRepresentation:rect:context:hints:flipped:] + 334
              4   AppKit                              0x00007fff8e3ec0b8 __51-[NSImage lockFocusWithRect:context:hints:flipped:]_block_invoke_0 + 82
              5   AppKit                              0x00007fff8e33b406 -[NSImage _usingBestRepresentationForRect:context:hints:body:] + 170
              6   AppKit                              0x00007fff8e3ec056 -[NSImage lockFocusWithRect:context:hints:flipped:] + 210
              7   AppKit                              0x00007fff8e3ebf76 -[NSImage lockFocusFlipped:] + 125
              8   AppKit                              0x00007fff8e1cf2b0 -[NSGradientColor _updatePatternImage] + 121
              9   AppKit                              0x00007fff8e1ceeff -[NSGradientColor _updatePattern] + 487
              10  AppKit                              0x00007fff8e1cec8f -[NSGradientColor set] + 26
              11  AppKit                              0x00007fff8e44460c -[NSTableView drawBackgroundInClipRect:] + 657
              12  AppKit                              0x00007fff8e443d0f -[NSTableView drawRect:] + 1086
              13  AppKit                              0x00007fff8e328064 -[NSView _drawRect:clip:] + 4217
              14  AppKit                              0x00007fff8e3266c1 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 1656
              15  AppKit                              0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
              16  AppKit                              0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
              17  AppKit                              0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
              18  AppKit                              0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
              19  AppKit                              0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
              20  AppKit                              0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
              21  AppKit                              0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
              22  AppKit                              0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
              23  AppKit                              0x00007fff8e3246f2 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 817
              24  AppKit                              0x00007fff8e324143 -[NSThemeFrame _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 314
              25  AppKit                              0x00007fff8e31fd6d -[NSView _displayRectIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:] + 4675
              26  AppKit                              0x00007fff8e2e9c93 -[NSView displayIfNeeded] + 1830
              27  Mail                                0x0000000105859377 Mail + 189303
              28  Foundation                          0x00007fff92d248a1 __NSFirePerformWithOrder + 359
              29  CoreFoundation                      0x00007fff9709c417 __CFRUNLOOP_IS_CALLING_OUT_TO_AN_OBSERVER_CALLBACK_FUNCTION__ + 23
              30  CoreFoundation                      0x00007fff9709c381 __CFRunLoopDoObservers + 369
              31  CoreFoundation                      0x00007fff970777b8 __CFRunLoopRun + 728
              32  CoreFoundation                      0x00007fff970770e2 CFRunLoopRunSpecific + 290
              33  HIToolbox                           0x00007fff96d70eb4 RunCurrentEventLoopInMode + 209
              34  HIToolbox                           0x00007fff96d70b94 ReceiveNextEventCommon + 166
              35  HIToolbox                           0x00007fff96d70ae3 BlockUntilNextEventMatchingListInMode + 62
              36  AppKit                              0x00007fff8e2e6533 _DPSNextEvent + 685
              37  AppKit                              0x00007fff8e2e5df2 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 128
              38  AppKit                              0x00007fff8e2dd1a3 -[NSApplication run] + 517
              39  AppKit                              0x00007fff8e281bd6 NSApplicationMain + 869
              40  libdyld.dylib                       0x00007fff8d5427e1 start + 0

  • Itunes does not start for one user but works for others on the same mac

    All of a sudden my itunes does not fire up.
    All other users on the same mac it is working fine.
    I have deleted and reinstalled itunes.
    Any help would be great.
    Cheers

    All of a sudden my itunes does not fire up.
    All other users on the same mac it is working fine.
    I have deleted and reinstalled itunes.
    Any help would be great.
    Cheers

  • Firefox not displaying website slider properly but works in other browsers

    I am creating a website and the slider image is showing at the side of the website. I am using firefox 20 . It works fine on other browsers and other peoples firefox but for some reason it is not showing correctly on mine. This is the test website http://greatgreendeals.co.uk/exmoorsafari/. I have a screenshot but I can not see how to upload here

    The #megaMenu is floated to the left, so it pushes div.featuredposts to the right. Try adding clear:left to div.featuredposts so it wraps down past the float.

  • Watching YouTube video full screen while working in other monitor

    So after upgrading to Mavericks when I have a Chrome browser window with a youtube vidoe loaded and I click to watch fullscreen my other monitor is taken over with a grayed out background. Quicktime started doing this awhile back, and Vimeo used to do it in Mountain Lion when it was embeded in another site, but if I went to Vimeo.com to watch a video this didn't happen. How do I change this?
    FYI, I have all Mission Control / Spaces options unchecked as I don't use that and don't want multiple Menu bars and whatnot.

    Hi, I just re-read you previous post.
    You said,
    Im using Google Chrome latest version and my mac is a mid 2011 mac book pro running max os x 10.8.5
    I presumed that you were using OS X 10.9.x as we are in the Mavericks (10.9) forum area, not the Mountain Lion (10.8) forum area.
    This changes things a little.
    In Mountain Lion, Apple's implementation for multiple displays is a little different to Mavericks, where both displays share the same 'space' so it is an extended display setup. Mavericks allows each display to have its own space, thereby allowing each dislay to act independantly of each other. This is where I did my brief test.
    Due to Mountain Lion's limitation, I think what you are seing is expected behaviour. Any Full Screen app will result in the other display to be greyed out.

Maybe you are looking for

  • What's the best game controller for a MacBook Pro?

    I have a mid-2012, non-Retina, 13" MacBook Pro with a 2.5 Ghz i5 and 8 GB of RAM. My current OS is 10.9.1. I've played Starcraft 2 for some time without any problems, but there are a few newer games on the Mac App Store that look like they'd be no fu

  • Help converting a driver to version 6.1

    The instrument driver network has a Keithley 220 driver for LabVIEW 7.0/8.0 but I have version 6.1. I attached the driver to this message. Is it possible to convert it so it will work with version 6.1? Thanks for any help. I could use a driver for th

  • Printing Postage labels problems

    I purchased a new HP p6203 computer with Win 7 Home Premium 64 bit O/S.... I Attached my not so new H/P c4240 printer which worked fine with Win XP... now when I try to print a Postage label via the U.S.P.S with Paypal  that use Pitney Bowes system,

  • SeamlessTabbing broken in IE7 and IE8

    I have a Flash movie in an html page and need seamless tabbing to work as the page has to be 508 compliant (so you need to be able to use the tab key to navigate)...In IE7 and IE8 you can tab through fine once, but if you continue the tab the second

  • Unable to download Facebook update

    I am getting the error "unable to download" Facebook update. Tried deleting app and reinstalling but same issue. Facebook app will appear in phone but its greyed out. I have tried resetting. I have iPhone 5 running version 6.1.4.