Effects not showing up on rendered video

Hey there
So just to clarify, I have some basic knowledge of AE, and have used it before in the past, but I'm trying to remove grain from some footage in AE for a new short film that I'm doing, and it looks absolutely fine in AE, but when I render the footage, it looks unchanged, like nothing has been done it. Any suggestions as to why this is happening?

Render settings used, and the project is a 2 minute long short film, that I've imported from Premiere Pro, with all the layers still intact.

Similar Messages

Colour Effects not showing up under effects panel anymore?

Hi,
After trashing my preferences due to an export issue, and then updating the app, the colour effects bar is not showing up under the Video Effects window like it did using the default layout. Using command-6 still pulls up the colour board but I cannot create masks or access it like I used to. The window now looks like this:
I know it's probably a simple fix but I can't figure it out.. Is there a way to restore factory settings?
Thanks for any help you can give me!
Joe

I knew it was something stupidly simple.. Thank you so much!!!
Joe

I just rented a video on my iPad, but it's not showing up under rented videos. Where do I go?

I just rented a video on my iPad and it's not showing up under rented videos. I have rented videos before. But don't know what to do. Help.

It should be in the Videos app
If not, are your age restrictions set up in the Settings >> General >> .......?
If your restrictions are turned on and you rented a PG18 rated movie or something, it won't show by design.

Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

Have you tried the standard fixes:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup via iTunes
- Restore the iPod to factory defaults/new iPod.
If still problem you likely have a hardware problem and an appointment at the Genus Bar of an Apple store is in order.

My Nokia 5230 has not showing the Photos and video...

My Nokia 5230 has not showing the Photos and videos(from Memory Card) in gallery. and Music library has not updating. Please send me the solution.

It has been released 3.3 version of NS which is working fine with Thunderbird
Cheers,
Marina
Nokia Suite team
Click on the Star Icon below if my advice has helped you!

Am editing with red files in premier pro and when I export and then upload to youtube it is not showing as an hd video. can anyone help?

am editing with red files in premier pro and when I export and then upload to youtube it is not showing as an hd video. can anyone help?

Then it's probably YouTube - have you checked here to see that you're watching the hi res version? It could be that YouTube is choosing an easier version to display based on your internet connection.
You can see on this screenshot that although the video has up to 1080 specs, my connection is making YouTube show me the 360p version by default.

HT4174 Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... Hwo do I get the vido to show in the viewer?

Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... How do I get the vido to show in the viewer?

So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

MiniDV Video in Affert Effects not showing correct ratio.

I'd like to know how to edit minidv video in its aspect ratio in After Effects. Video is 720 by 480 and 16 by 9 (non-square pixels). When I import the video, it's stretched too tall (set to square pixels I believe). No mater how many times I change the composition ration to widescreen, it still does not show correctly.
I seem to do fine in Premiere. It automatically sets the aspect ratio for minidv video. But I can't get After Effects to do it. I don't want to spend time creating something only for it to be squished in Premiere later.
So how to do create a composition that's 16 x 9 using non-square pixels 720 by 480 that can be edited into miniDV video in adobe premiere?

If you properly interpret your footage as widescreen (AE may guess incorrectly here) and put it in any square pixel comp it will not look distorted but it may or may not fill the frame. It will only fill the frame if the frame size is the square pixel equivalent size of your widescreen footage. This applies to all non square pixel aspect ratio footage.
If you interpret your footage as widescreen and put it in the same format (NTSC, PAL HDV) widescreen comp it will also fill the frame. There may be some black pixels on the left and right side because almost all cameras don't put live pixels in every column or even every row of the frame, but the footage will fill the frame. The caveat is that this footage will look distorted unless you activate pixel aspect correction preview in the Comp window because computer displays are always square pixels. You have to fool the display by selecting this option.
When you render your widescreen comp, if you're using any of the standard DV codecs or a codec like Quicktime Animation or JPG, there is no place in this codec for an aspect ratio tag that will tell apps like Premiere or FCP or Avid that this footage is supposed to be widescreen. Once you import the footage to another app you'll have to check and make sure that the footage is interpreted as widescreen there too.
I hope this helps. What ever you do, do not use the Fit to Frame option to force footage into a comp frame. If you insist on using Fit to Frame then check the X and Y scale values after you do and make sure they are identical. If they are not, you've distorted your footage at that point and it will be difficult or impossible to fix it later.

Lighting effects not showing up in CS5

This plug-in is not showing up on both CS5 and CS 5.1 running on a MAC OSX 10.6.7 Italian system. I have tried both from the Italian versions of PS and even from one new version in English of PS5.1 and it isn't to be found under the menu "rendering" or enywhere else. I see that it is in the plug.in folder and the folder of lighting effects is there as well, but it just doesn't show up. Any ideas about this bug? I've tried it on 3 different computers!

As far as i know, the lighting effects filter only works in the 32 bit version of
photoshop cs5/5.1 on a mac system.
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7959a.h tml
There is also a photoshop macintosh forum (you posted in the photoshop elements forum)
http://forums.adobe.com/community/photoshop/photoshop_macintosh
Added: If you have the extended version of cs5, you might experiment using 3d lights
for lighting effects, which works in the 64 bit version of cs5. Turn your layer into a
3d postcard and use the 3d lights for various lighting effects.
MTSTUNER
Message was edited by: MTSTUNER

Effects not showing up in ichat

Hi all
I am not able to get my video effects to show up in ichat. I am able to use them in photobooth and imovie.
josh

iChat uses Core Image
http://docs.info.apple.com/article.html?artnum=301347
4:16 PM Sunday; December 9, 2007

Effects not showing up in LiveType

Hello - I am trying to apply an effect in LiveType, and while it looks like it's going into the timeline, there is nothing there. It looks as though the effect has been applied to the timeline, as it says the name of the effect, but the effect does not show up... thank you.

Hey Nick - thanks for offering to help! Turns out all I did was close out of LIveType, then open it back up again, then the Effects seemed to work, though don't how, as I did not do anything different before I closed it out... hmmm... ok then, thank you again!

Plugin Effects not showing up in FCPX

Hi,
I recently bought a new computer. I installed FCPX and copied my plugin effects to the movie folder (motion templates, etc.) the same way I had them working in my old computer, but the effects are not showing up in FCPX when I launch the Application. I read somewhere that it might be a permission issue so I ran disk utility but it didn't make a difference. Any ideas?
Thanks,
Marc

I know this is an old thread but I had the same issue. Found this on Apple's Motion help document. This was very helpful:
.moef is the Final Cut Effect template extension.
.motn is the Final Cut Generator template extension.
.moti is the Final Cut Title template extension.
.motr is the Final Cut Transition template extension.
Just be sure your templates are in the right folder. I had downloaded a template that I thought was a title but ended in .motn, which meant it was supposed to be in the /Movies/Motion Templates/Generators/ folder. Good luck!

Effects not showing in timeline

Hi
When i'm color correcting a clip, it's seen in the user. But when Im putting into the timeline the effect is not showing. if I now right click at an view it in the viewer the effects is no longer shown. All though you can see the settings it won't show if you change them.
My RT settings is not set to show baselayer only.
It would be great if someone can help me out!

It would be helpful if you would describe the sequence of actions you are taking.
Are you applying one of the color correction filters to a clip already edited into the sequence / timeline? Etc.

Video Icons not showing up to play video

When i come to play a video, it gives you a menu down the side to see what player i want to use. Most of the icons are not showing up. It gives you an Icon like a notepad with what looks like a pen and pencil crossed,and the spinning wheel is present. I am not running any other application while i am doing this.
After about 10 mins it`s all back to normal. All the original Icons are showing eg- Quicktime player ,Quicktime player 7,VLC,Real player, and Adobe Media Player. It`s happening in the first 10 mins after i have turned the computer on,and then as i said it goes back to normal.
Kettle4

No i have no message to verify/ repair your disk with disk utility. I am 62yrs old and i am not very technically minded. Sorry it`s an iMac, Mac OS X (10.6.8) Does this disk utility automatically appear. As i have said it only happens in the first ten mins.with the spinning wheel. I can go back down now and they will all be showing you the original icons. Sorry to cause you bother.
Kettle4

Filters, styles, effects not showing in pse12

I have a pse12 in win 8 pc. When I open editor, the filters, styles, effects are not showing up. Pls help. Thanks.

Hi, you are posting in the wrong forum, and will do better asking in the Elements forum
http://forums.adobe.com/community/photoshop_elements
To be clear, are you saying you can see the menue bar, and that you are not seeing what you'd expect to see under Filters?
Or can you not see the menu bar and/or the toolbar and other panels? In Photoshop you can toggle through three different screen modes with the f key, and turn panels off and on with the Tab key.
If that didn't help go ask in the Elements forum, but give a lot more information.

Effects not showing up on rendered video

Similar Messages

Maybe you are looking for