Effects of using keychain on login

I just began using keychain with the result that when I login 7 popups appear in succession asking for permission to used the "Local Items Keychain". The 7 are:
talagent
Message agent
Call history plugin helper
Calendar agent
cloudd
Safari
com.apple/iCloudhelper.xpc
How do I enter permission once and for all for each of these to prevent the popups on each login?

There are several possible causes for this issue. Please take each of the following steps that you haven't already tried, testing after each one, until it's resolved. Back up all data before making any changes.
Step 1
Follow the directions in this support article.
Step 2
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select the iCloud keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password.
Select
          Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain.
Step 3
Open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Then re-check the box. Follow one of the procedures described in this support article to set up iCloud Keychain on an additional device.
Step 4
Open the Keychains folder as in Step 1. There should be a file in that folder with the name "login.keychain". If there is also a file iwith the name "login_renamed_1.keychain", then please do as follows:
☞ Rename login.keychain to "login-old.keychain".
☞ Rename login_renamed_1.keychain to "login.keychain".
You can then close the folder.
Delete the login keychain from the keychain list in Keychain Access. Choose
           Delete References
when prompted, not Delete References & Files.
Select
          File ▹ Add Keychain...
from the menu bar. Add back the file now named "login.keychain". If any of your needed keychain items are missing from it, also add back the file now named "login-old.keychain". I suggest you transfer any needed items from that keychain to the login keychain, then delete it. The transfers are made by drag-and-drop in Keychain Access. You'll need to enter your password for each item transferred.
Run Keychain First Aid again. Quit Keychain Access.

Similar Messages

How to use keychain to login to websites

how does one use the keychain or can one use the keychain much like how one uses LastPass to login to websites like this forum?

Keychain shouldmautomatically offer to store anda retrieve passwords.
You must enable auto-filling of usernames and passwords in the Safari Preferences.

Why does a Login Error occur: "AFP Client wants to use Keychain Login"?

I have three people in my house with separate logins. We are currently using two desktop G4s which are networked via 1000 Base T. When the users login to one of the Macs, they must enter their passwords twice. Once for the AppleShare login and then a second time for the KeyChain Login.
If I attempt to unify the passwords, which are exactly the same, I will get a login error: "AFP Client wants to use Keychain Login". At this point, a dialogue box will appear looking for a password, but not accepting any kind of text at all. All I can do is reset the Mac, go into my admin login and remove the login.keychain file from the local Library folder to get back into the User account.
In my attempts to fix this, I have removed every preference file with the word "login" in it and re-logged in without success. I have also used the Keychain Access software to administer Keychain First Aid without success. Finally, I have deleted the keychain login in Keychain Access without success. I have done all of these separately and together without success.
This is only happening on one Mac. The Mac that has no files on it. All working files are stored on the other Mac and it does not have the same problem at all.
This is not a huge problem, but it is annoying. I would appreciate it if anybody knows anything about this and could shine some light on the situation.

Sorry about the delay from your last reply. I have been busy with work and studying for a licensing exam.
Anyway I tried the AppleJack Utility you suggested. It looked like it tidied up some things. But as for my particular issue, it did absolutely nothing.
Interestingly enough, you know when you aren't looking for something and that something just happens by accident? When I logged in the other day, I typed in the first login. The second dialogue came up immediately and I hit the cancel button instead of the OK button. When I was passed on to the Finder, the second login dialogue came up again. I typed in the password this time and checked the checkbox. When I relogged in, the problem vanished. I only waited this long to let you know to make sure the problem is gone and it is. I wish I would have thought of selecting the cancel button before. Sometimes solutions are simple like this one.
Thanks for your help.

Using "Keychain Access" as a Password Manager

Hello All,
While searching for a secure, trustworthy password manager I started wondering why I couldn't just use Keychain Access built into the Mac OS.
I've tried others and they're all nice in their own way but why not use what's already there?
Any suggestions, concerns or gotchas are welcomed.
Thanks in advance for your time.
IAV

You can also change the security settings on your keychain and/or create additional keychains. So you might have one keychain with especially secure settings for certain items and another with less secure settings for others. Moreover, you can adjust some settings for each item within a keychain, as well.
Or you can do what I do which is set up several keychains and then render the whole system entirely pointless by saving the passwords in your original keychain because you are terrified you'll forget them otherwise... (I don't actually know why I set them up this way...)
My login password is not my keychain password and my keychain locks after a minute, I require a password to wake from sleep/screensaver (though this does not always work properly) and sensitive items require re-entry of the keychain password anyway. So you can set things up so your keychain is more secure if you want to, at the price of some increased inconvenience.
- cfr

Combining user Keychain with login Keychain

Just recently did a Erase and Install upgrade to Leopard on my G5 and restored my previous Keychain Access data via Backup and my MobileMe account. This has created a separate Keychain file in my user/Library/Keychain folder with my user name, resulting in a login Keychain file and a user named Keychain file.
I have had the same Keychain since Jaguar and have been using Backup and my .Mac/MobileMe account to transfer my Keychain after upgrades and between my computers ever since. I did not notice the user named Keychain until I upgraded to Tiger on my old G4 a couple of years ago. Is the user named Keychain something held over from Jaguar?
The reason ask this is because I had some slight problems with passwords after upgrading to Tiger and I think it was because of having two Keychains -- one login and another user name. Currently, under Leopard, some new Keychain items are being added to both the login and the user named Keychains and not only is this redundant, it looks like trouble just waiting to happen.
First, without a separate user account would there even be a user named Keychain?
Secondly, can I combine the login Keychain and the user named Keychain to have a single Keychain file in the user/Library/Keychain folder?
Thirdly, is there any reason I cannot copy & paste Keychain items into one Keychain and delete the other -- leaving a single login Keychain?
Currently I have over 300 items in the old user named Keychain and only 8 or 10 in the login Keychain. I have been going through the old Keychain and eliminating dead-ends and duplicates. I have also tried copying & pasting items between Keychains and it seems to work.
Message was edited by: William Young2
Message was edited by: William Young2

Barney-15E wrote:
Anyway, if there is not much in the login keychain, set your named keychain as the login keychain (select it and then File menu>Make keychain "yourname" Default). You should move any keychain items over to the "yourname" keychain, first.
Then, delete the login.keychain and select the option to remove references and files. It should stop loading the login.keychain.
I don't know what will happen if you rename the "yourname" keychain in the finder, but you could try backing it up and renaming it login.keychain. When you open Keychain Access, you might have to reset it as the default. Backup first.
This is what I was thinking too. I think I will give it a try since there are less than a dozen items in the login keychain at the current time.
A couple of new items have been added to both the login and the usernamed keychains and I would just as soon have Keychain Access set-up as it would be from a new install -- without having to lug around a Keychain from Panther.
Thanks. I'll give it a try in a couple of days and report back.
will young

Use Keychain to find or store password with Safari

Hello Guys,
I wonder how I could use Keychain to find my forgotten password on hotmail with Keychain. Do we need to activate something? I'd really like to know.
At least, do you know how to set my Safari, so I can store my passwords?
Thanks!

provided you actually ever stored the password in the keychain, open keychain Access, locate the keychain entry for hotmail, double-click on it and check the box to show password. you'll have to enter you keychain password at this point which is your login password by default.

I plugged in my brand new nano to my husbands desktop to get it registered, but had a problem mid way through when I tried to used an apple login that already existed. Now it's not registered and the computer won't recognize my device. How do I fix this

I plugged in my brand new nano to my husbands desktop to get it registered, but had a problem mid way through when I tried to used an apple login that already existed. Now it's not registered and the computer won't recognize my device. How do I fix this?

iPod not recognized in 'My Computer' and in iTunes for Windows
Call U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273) to register your iPod Nano.

How do you use a custom login application?

I have setup a custom Login Application as instructed from the admin guide, but cannot find any instructions on how you then go about using it. Some other posts on here mention customising/linking a page to it based on the user Login.jsp, but they arn't clear on the steps to do this.

The solution I was using was a single sign on system called CAS, which handled the authentication. The class I used is shown here:
http://www.ja-sig.org/wiki/display/CAS/CASifying+Sun+Identity+Manager
The java class is called: CASResourceAdapter.java
Most of this code is not used. The bit you would be interested in is in the method named:
public WavesetResult authenticate(HashMap loginInfo) throws WavesetExceptionIf you delete all the code in here and replace it with the code below as most of this is a customised search that the author wrote:
     final String method = "authenticate";
     if (_trace.level1(this,method))
            _trace.entry(WSTrace.LEVEL1, this, method);
        WavesetResult result = new WavesetResult();
        String userId = (String)loginInfo.get(USER);
        if(_trace.level2(this,method))
          _trace.info(_trace.LEVEL2, this, method, USER + " = " + userId);
          _trace.info(_trace.LEVEL2, this, method, "map: " + loginInfo);
        if (_trace.level2(this,method))
            _trace.info(_trace.LEVEL2, this, method, "Obtained user '" + userId + "' from info: " + String.valueOf(loginInfo));
        result.addResult(Constants.AUTHENTICATED_IDENTITY, userId);
        return result;You could also remove the trace code. The code you would be interested in particular would be:
WavesetResult result = new WavesetResult();
String userId = (String)loginInfo.get(USER);
if(_trace.level2(this,method))
result.addResult(Constants.AUTHENTICATED_IDENTITY, userId);
return result;The logininfo is a method used to retrieve whatever userid was used to authenticate. This is what was needed to retreive the userid from CAS. You will need to replace this with custom code to retreive the userid from your webservice.
Once you are happy with the code, place the compiled class with the correct package levels in idm/web-inf/classes. You may need to create the folder called classes.
Next login to your idm and goto resources and then configure types. Add a custom resource to point to your new class In my case it was edu.unmerced.idm.adapter.CASResourceAdaptor. Save this and then add this as a resource in your resources screen and except all defaults and give it a custom name of your choice.
You then need to add this resource to each of your users.
Next you need to goto configure and then login. In here you need to create a new login module group and point it to your CAS resource. Then change the default login for the users login application to use this new login group. See idm specific documentation on how to do this
Reboot your idm application server.
You would now use your alternative webservice system to authenticate and then afterwards get it to forward to your idm and if the code picks up the user from your webservice correctly you should be logged into idm as that user.

Does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

Several ways to get similar results. Image > Adjustments > Posturize with low values similar to what you'd use n Cutout. This is the most flexible way I can think of as you keep the image in RGB mode with layers intact. A more radical approach would be to reduce bit depth using Indexed Colour. You'll need to experiment with settings, try changing Forced to Primaries, and Matte to Foreground Color. There's no going back from this route, although you can change the mode back to RGB to re-enable layers, adjustment layers etc.
A nice thing about the Filter gallery filters is that you can change the layer to a Smart object with all the control that gives you.
Now if only this forum could filter out bizarre content.

How can i use my custom login page in a custom partner application ?

Dear All,
I'm trying to customize a login page displayed other than the default sso login page
by submiting my form to the regular pl/sql procedure : "PORTAL.wwptl_login.login_url"
but i tried to type the requested partner application url in the browser i got the sso
login page other than my custom login page. So, How can i use my custom login page in a custom partner application ?
Regards,
Mohammed Amin
[email protected]

I cannot begin to express my level of frustration. I have been trying to use the composition widget light box display for some time now. I drag the widget to my document. The default widget has three small trigger boxes and a large area made up of a forward and backward button, a background, a text box and a frame for your image.
My steps have been …
I click on the little trigger box.
I click on the frame that holds the main image.
I go to the fill menu and browse my computer for my image and then click OK.
IT shows up on my screen. Yay
I attempt to continue using the next two trigger boxes provided in the widget.
After that, I add more by clicking on the little plus sign.
This is where all heck breaks loose.
Every single time I attempt to add thumbnails, something messes up. When I go to preview, either not all of my main images show up, or it starts with the wrong one, or some are missing. I have looked and looked for help on this and the only thing I can find is how easy it is to create a great portfolio lightbox display. But as we know, that only works when your thumbnails are the same image as the images in your lightbox. If you want something different, you have to use the composition wizard. I am finding it extremely difficult and confusing to customize.
Is there an exact sequence you need to use to add images to the slideshow? I am my wits end.

I'm wanting to use the "Actions" in Photoshop Elements 11. But when I get the Actions box up, it is only showing a small list of effects to use. And no side bar to go any further. When I click on the little arrow at top and then click on "load actions"

I'm wanting to use the "Actions" in Photoshop Elements 11. But when I get the actions box up, it is only showing a small list of effects to use. And no side bar. So I can't go any further. When I click on the little arrow at top and click on "load actions", I am only getting a box with empty space saying "No items match your search". The folder at the top does say "Actions". How do I get more effects? The tutorials that I've checked into all show a long list of effects in their box. Can anyone help?

To use the existing actions, try the following:
1. Open one of the Action Sets, in this example Special Effects is the Action Set, by pressing the small arrow beside the set name.
2. Then click on the name of the Action, in this example Faded Ink is the Action name.
3. Then press the Play button to run the action.

How do I find where an effect was used?

Hi -
I'm running AE CS6 (on MBPro OS X 10.7.5) and I just re-opened a file made with AE CS4 that uses some BCC plug-ins which I haven't re-installed in CS6. I got an alert that some effects were missing from the project. I'd like to find out where the effects are used in the project so I can delete them and end the alert message's reign of terror. Is there a shortcut way of doing that or must I hunt through every layer manually?
TIA your advice,
JL

Removing an effect from a composition will not cause AE to be unable to launch entirely.
Can you open AE and create a new project?
Do you happen to know the exact version number of AE? It should be 11.0.2 (although, if you're a cloud subscription member, it shouldn't start with an 11 at all )

Hi, I'd like to put a black and white effect on my colour footage which will look really sharp but which also looks bright so the whites look bright and the blacks look very dark . Any tips of which best effects to use to achieve this look in Prem Pro. Th

Hi, I'd like to put a black and white effect on my colour footage which will look really sharp but which also looks bright so the whites look bright and the blacks look very dark . Any tips of which best effects to use to achieve this look in Prem Pro. Thanks

Under the Effects-Lumetri Looks-Desaturation choose a B and W effect. Then add the luma corrector from the Video effects-colour correction section. Adjust the brightness and contrast to get the effect you want.

Somebody knows what effect was used in this video on the text?

somebody knows what effect was used in this video on the text?
im talking about this "extreme drop shadow" he was using please help me i must have it for a project.
thanks to anyone who can help me.
Crown the Empire - Initiation - YouTube

Search Google for "After Effects long shadow" or "After Effects Retro Shadow".
Or spend a few dollars and buy this:
http://videohive.net/item/the-ultimate-long-shadow-toolkit/6657312?ref=amigoproductions

Which effects were used in this video?

In the link below does any one know which effects were used. I am creating a video but I would like to recreate some of these effects, specifically the two videos over lapping with transparency, the fast reverse clips, and any other you can see from the video would be helpful. Thanks!
KNITZ Fall 2014 - For Love & Lemons | Facebook

Overlapping with transparency is simple enough. Just put on video on track one and the other on track two. Then set the track two video to 50% opacity and adjust to taste.You will probably spend some time changing the position of one or both of the videos.
Shooting on green screen makes it easier to overlap videos though. Or, if not a chroma key color, at least a solid color.
Reversing a video is a simple matter of changing the speed to a negative number.
There really isn't anything too complicated in that video as far as I can tell. A lot of cropping and masking and transparency. Not much else.

Effects of using keychain on login

Similar Messages

Maybe you are looking for