Effects only works on first page when viewed in IE 8

I use the drop shadow and bevel effects on all of my sites, and I've found that when I view my site pages in Internet Explorer 8, the effects only shows up on the first page. I set up all effects on the MASTER page, so they should appear on all of my site pages.  Now, when I view the site pages in FireFox or Chrome, ALL pages look great!  The drop shadow and bevel effects appear on all site pages as expected.
Also, because MUSE doesn't allow me to upload to SFTP, I have to export everything to HTML, then I use Adobe Dreamweaver to upload to SFTP server.  When I export a page, the preview that pops up in Internet Explorer actually looks perfect.  Is this a MUSE bug?  The first page looks fine in IE8, but all of the additional site pages have NO effects at all.  Again - all effects are created on the MASTER page which is applied to all site pages, and ALL pages look perfect in other browsers.  I only have this problem in IE8 - with compatibility mode on and off - doesn't seem to matter.
Can't send a link because of the site being on our Intranet, but I can send you the MUSE file if you want to check it out.  Just let me know.
Any questions, please let me know.
Thanks.
Kris B.

UPDATE!  I discovered that the problem with the shadow effect not working on every page of a multi page site when viewed in Internet Explorer 8 has something to do with the layers tool.  I was able to correct the problem, but it took a lot of time.  Here are the steps I performed:
Created a duplicate of the existing MASTER PAGE, opened the duplicate master page, then pressed Ctrl-A to select all and assigned to LEVEL 4 (selected highest level).
Changed the master page of each site page to the duplicate page
Opened up each site page, pressed Ctrl-A to select everything on the page and assigned to LEVEL 1.  One field was hidden below a field on the master page, so I selected that field and assigned it to LEVEL 4.
At this point, I saved and exported the site to HTML and pushed to my SFTP server - there was no change - the error still existed.
Went back to Muse and opened each of the site pages, selected all of the LEVEL 1 fields and reassigned to LEVEL 2.
Made sure all of the LEVEL 2 fields were still selected and then REASSIGNED them back to LEVEL 1 and saved the site.
Exported the site to HTML and the pushed to my SFTP server using Adobe Dreamweaver, and this time the shading worked perfectly!
I opened the site up again in Chrome and FireFox - no change.  The shading appeared just fine when using Chrome or Firefox.  I only experienced this problem with Internet Explorer 8.  Seems to me that there is a bug in the system involving the levels tool and Internet Explorer 8.  I can send you the before and after files if you would like to check out the differences.  Just let me know.  The site I uploaded to the temporary business catalyst site is not the site I corrected, so I will have to send you the .muse file I worked with.  Just let me know.
Thanks,
Kris Bancroft

Similar Messages

  • Exporting PDF files on CS5 - hyperlinks to URLs only work for first page

    I'm new to InDesign and am working through the "Classroom in a Book" training workbook for CS5, I 've got to lesson 14 and have found that when exporting to PDF (interactive) format, the hyperlink to a URL only work for the first page of the document.
    I made my own document with links on multiple pages, and the same thing happened. I followed the lesson to the letter (3 times!)
    I also tried setting up individual links for individual pages and that did work, so how do I get one piece of text to link to one URL on multiple pages of a document (ie on a Master page) ???

    Thanks Peter,  I've actually got CS5.5, so I presume this patch is already updated on this version, because when I tried the 7_0_4 patch it wouldn't run; giving the message: "Some updates failed to install, and "update is not applicable". So I tried the latest update: 7_5_2 patch, but I'm still experiencing the same problems with hyperlinks not working from the Master pages.

  • Form wizard only works on first page

    I can't seem to get the form wizard to convert a pdf document on anything more than the first page. The wizard runs and the first page works fine, but there are no form fields included on any of the remaining pages. What am I doing wrong?

    What form wizard?
    Jon

  • When I print a web page it only prints the first page and not the rest of the web page below the page break.

    When I print a web page firefox will only print the first page, all of the content to the first page break and nothing past that.
    How can I change the settings so that it will print more than on page?

    -> Tap ALT key or press F10 to show the Menu Bar
    -> go to Help Menu -> select "Restart with Add-ons Disabled"
    Firefox will close then it will open up with just basic Firefox. Now do this:
    -> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
    -> go to View Menu -> Zoom -> click "Reset" -> Page Style -> select "Basic Page Style"
    -> go to View Menu -> Toolbars -> unselect All Unwanted toolbars
    -> go Tools Menu -> Clear Recent History -> '''Time range to clear: select EVERYTHING''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies, Cache, Site Preferences''' -> click "Clear Now"
    -> go to Tools Menu -> Options -> Content -> place Checkmarks on:
    1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
    -> go to Tools Menu -> Options -> Security -> place Checkmarks on:
    1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
    -> Click OK on Options window
    -> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select all Unwanted Search Engines and click Remove -> click OK
    -> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
    You can enable your Known & Trustworthy Add-ons later. Check and tell if its working.

  • Master Page: Alternatives (Subform Set) works only for the first page

    Hi everybody!
    I have bumped into a very weird problem with ADOBE Forms:
    When I create an 'Alternative' in a Context area and then place it on a Master Page, it works only for the first page. On the rest of pages it always show the 'TRUE' subform, regardless of the condition (which is not changed, of course). Absolutely the same Alternative works perfectly in a Content area for all pages.
    Has anybody seen something like this? Any ideas why?
    Thank you!

    This happens because of the processing of the form.
    You can see this here:
    LiveCycle ES2 * Adobe LiveCycle Designer ES2
    You have to put a own variable, which is set with the value you want in the very beginning.
    I know, it is not that logical in the first moment, but it makes sense.
    Regards
    Florian
    PS: This space SAP Interactive Forms by Adobe is the correct for questions like that

  • An image comes on my screen, but I can only see the first page.  When I try to print, I get a blue question mark and can't print.

    Recently when I pull up a multi-page document from an internet site, I can only see the first page.  I can't scroll through it.  When I try to print, I get a big blue questionmark.  What's the solution to this, please?

    Thank you so much!! So simple, yet so effective! Am happy!

  • SMARTFORM only displays first page when running

    Hi there
    I have created a 3 page Smartform.  When testing it, the output only displays the first page.  I have specified the next pages on every page as follows:
    Page 1 next page -> Page 2 (main window defined on this page)
    Page 2 next page -> Page 3 (no main window defined on this page)
    Page 3 next page -> Blank (no main window defined on this page)
    Kind Regards
    Gustav Coleske

    hi,
    just do like this,
    on first page main window,
    right click,
    create,
    flow logic,
    select command field and enble the chcck box there and provide the input 'page2',
    do like this for third page in page2 then it works.
    reward points if useful,
    regards,
    seshu.

  • Why do I only get the first page of a 5-page pdf when I attach it in Pages?

    I'm trying to add a multi-page pdf to the end of a Pages document so that I can see what hard copy I sent in the post with the letter. However, I can only attach the first page of the pdf and the other pages don't show. I have tried selecting all the pages and choosing Print Selected Page when creating the pdf, (which was suggested in the Snow Leopard help pages) but the same thing still happens. Just the first page appears. Any ideas what I'm doing wrong? I'm not sure if this should be posted in Snow Leopard or Pages so I'll try here! Thank you.

    chris
    You can not attach a multi-page .pdf document to Pages.
    Just create a folder in which you enclose both your Pages letter and the .pdf.
    Peter

  • How can I view a PDF file on my IPad? I only get the first page.

    How can I view a PDF file from my Ipad, both in email and Internet links? I only get the first page.

    Support for viewing PDFs in emails and web-pages is built in to the iPad. You need not have bought an app for that.
    There are PDF apps that provide more features than the built-in functionality, but for basic viewing of multi-page PDFs no app is required.

  • When I press ALL in print options, my canon printer will only print the first page.  It is connected to wifi

    when I press ALL in print options, my canon printer will only print the first page.  It is connected to wifi

    when I press ALL in print options, my canon printer will only print the first page.  It is connected to wifi

  • When i have a web page which includes an SVG file that spans 2-3 pages, if i try to print the web page it only prints the first page.

    Basically, i have an html file that embeds a large SVG file. When i try to print the html file, FF only recognizes the first page - basically the second, third, fourth pages do not appear. Is this a known issue with FF?
    Can it be fixed?
    FYI - Google Chrome allows you to print the other pages but unfortunately headers/footers cannot be controlled and thus overwrite some of the SVG content.

    Anyone?

  • Why when i save my indesign file down to an earlier version does it only save the first page of my document?

    why when i save my indesign file down to an earlier version does it only save the first page of my document?

    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index http://forums.adobe.com/index.jspa
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll

  • When I open a template I only get the first page. Any ideas?

    Hi, When I open a template in Pages I only get the first page and not the continuation pages. Does anyone have any ideas of what I'm doing wrong? Thanks.

    This same question was asked & answered earlier today. I'll use my same response & the same screenshot I used then.
    Skimming the templates in the Template Chooser shows you all of the pages available in the template once you open it. You can insert the one(s) you want, even more than one of any of them. Most users don't want or need all of the different pages, especially when they start the document.

  • When I copy/paste text to an ipages empty document can does it only show the first page of what I copied?

    When I copy/paste text to an ipages empty document can does it only show the first page of what I copied?

    You want to use word processing mode. I suggest you ask your question in the Pages forum and include information about what you are copying. Off the top of my head I can't come up with any reason you'd see this in WP mode.   https://discussions.apple.com/community/iwork/pages

  • Anytime I try to print in Firefox a Microsoft KB article that is 1 page, I always only get the first page.

    Anytime I print any Microsoft KB article, I only get the first page worth of text. This is very troubling because the articles are typically long, and I only get 1 page. The second page always comes out blank (even though in IE it will print out multiple pages with all the text).
    My specific example today is listed in the URL below. This example will only print to the "DIR" command, I don't get the full page printed out.
    Anyone else have this problem? Anyone have a resolution? I hate having to hit up IE just to print a single article.
    I updated to FF 8.01 just to make sure, and I have tried different printers and even computers, to no avail. Even the print preview has the issue, only the first page worth of text is printed and the second page is always blank (even if there are 3, 4, 5, etc pages of data to be printed).
    I have also tried the Firefox Menu -> Print command, and the "on-page" print command. I have seen moderate success with highlighting all the text that I want to print and going to "Print-Selection" but it is ugly.
    Any feedback or assistance is greatly appreciated.

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Maybe you are looking for