Effects similar to auto-tune in CS5.5?

Anyone know how I can apply effects similar to auto-tune in Audition CS5.5? I don't really want an effect as strong as most mainstream music, only to add a tiny bit of trance/robotic echo effect to my vocal tracks, similar to some parts in Pentatonix's Daft Punk track: [Official Video] Daft Punk - Pentatonix - YouTube.
Thanks.

A couple things to check:
- Make sure you've got the latest AME 7.0.1 update installed
- Try holding the Shift key down while launching AME to clear your prefs. If that doesn't work, try deleting these folders (NOTE: this will delete any user presets or custom workspaces you've created):
C:\Users\[username]\AppData\Roaming\Adobe\Common\AME\7.0\
C:\Users\[username]\AppData\Roaming\Adobe\Adobe Media Encoder\7.0\
- Try adding your Premiere project directly to AME's queue via drag-and-drop or by using File > Add Source. Do your sequences render correctly in this workflow?

Similar Messages

Is Pitch Shifter II the same thing as Auto Tune?

I'm looking for a plug-in on Logic Express 7 that is similar to the vocal effect you always catch T-Pain using. I believe it is called Auto Tune. I just wanted to know if this is available in LE7. Thanks.

RyConn M.D. wrote:
I'm looking for a plug-in on Logic Express 7 that is similar to the vocal effect you always catch T-Pain using. I believe it is called Auto Tune. I just wanted to know if this is available in LE7. Thanks.
No. it is not the same. to get those fast pitch rises and falls, you either need auto tune, or a really good Vocoder.
Try using a Vocoder instead. This will be closer to that sound. BTW I work in syndicated radio, and it is the single most overused effect right now, so IMHO, try something else. We're starting to get listener complaints about having so many songs with it on our chart. Seriously...
Cheers

Auto Tune - customized feature (preset) request

The Auto Tune feature usually works quite good and is a real time saving feature. But on some sets of images the effect is too storng (for my taste). If we can have a 'preset' or ability to customize the strenth or effectiveness of the Atuo Tune (i.e. simlar to the FADE SHARPEN in Photoshop after applying the SHARPEN filter), it will be very helpful. This will be very helful especially when we are doing some batch develop with Auto Tune.

A manual auto-tone, that is...

Using 'Auto-Tune' with Final Cut Express HD...

Is it possible to use the program 'Auto Tune' (or a similar program) to correct the pitch imperfections on an audio track of an AIFF file - then re-import it into the audio track of a Final Cut Express HD project?
Thanks,
Jim

I have never used such a program, but it stands to reason that this should work as long as you export it from the program to a FCE-friendly format.

Solution to Auto Tune 4 showing unsupported in Audition

Hello there,
Recently I updated Auto Tune to the latest Version 4.3 DirX. Although there were no problems with other Audio Editors on my computer, after I refreshed the effects loop in Audition 1.5, Auto Tune was shown as unsupported. I searched the Adobe data base and could see others have had this problem, but I have been using Auto Tune for quite a while, and this was the first sign of a problem. One of the posts had found a solution by editing the Registry, (which proved to be correct). However, I decided to email Antares first. Antares replied quickly with the solution,(which worked), and explained that the problem occurred with the change from Cool Edit 2 to Adobe Audition, and that the problem is specific to Audition. So, here is what to do if you are affected by this......
This fix should only be attempted if you are comfortable working with the Windows Registry.
(1) Close Adobe Audition.
(2) Open the Registry by going to the Start Menu, selecting Run, then typing regedit, and clicking OK.
(3) Under HKEY_LOCAL_MACHINE, go to the key
\SOFTWARE\Adobe\Audition\Plugin\DirectX\
(4) Locate the Data Item whose Name is (02A06B08-744E-40E3-8B78-E45D71750DC8)
(5) Delete that item.
(6) Close the Registry.
(7) Run Adobe Audition.
(8) In the Edit View, Refresh the effects List.
All should now be well.
Here is a link to this information at Antares....
http://portal.knowledgebase.net/al/5384/7553/article.asp?aid=138147&n=1&tab=search&bt=4&r= 0.3019785&s=
And here is a link for furher help at Antares.....
Brian English
[email protected]
831-461-7800x233
http://www.antarestech.com
Product Specialist
Antares Audio Technologies
231 Technology Circle
Scotts Valley CA 95066
All the Best,
aomahana.
www.audioarts.co.nz

Many thanks for posting that. I've set this thread not to expire. I'll just repeat your good advice -
i This fix should only be attempted if you are comfortable working with the Windows Registry.

Auto-tune method

For the auto-tune in the MAX, I wanna to ask how many counts that the motors should be runned?
Can I change the desired position?
Regards,
Ivan

The count value depends on the resolution of your motor. Set it to be the maximum counts you want your motor to travel while responding to the signal sent for auto-tuning. Take a look at the following tutorial for more detailed information on servo tuning:
http://zone.ni.com/devzone/conceptd.nsf/webmain/4B7775373E4AE64986256B6000691505
Hope this helps -
Julie S
Applications Engineer
National Instruments

Auto Tune prior to running motion control program (LabVIEW)

Hi,
I am controlling Parker Compumotor (404-LXR) linear servo table via GV6 drive and PCI-7344 motion controller.
The problem is that I always have to run automatic tuning in MAX when I turn off all the system and restart it.
Before I use the automatic servo tuning in MAX, the servo table buzzes and oscillates wildly. Cabling seems to be successful as linear servo motor is completely controlled by LabVIEW after auto tuning in MAX.
I wonder how I can just run my LabVIEW program without running Auto Tune step.

Hello Gino,
Thank you for using our discussion forums. Yes, you can programmatic load the PID parameters from LabVIEW. Tune your servo using auto tune, once you are satisfied with the response look under the Control Loop tab for the PID parameters. In LabVIEW use the Load All PID Parameters.flx and use the tuned parameters from Measurement and Automation Explorer as the PID Parameters input for this VI. Place the VI before the multistart.vi. This will make sure the correct PID settings are used. I hope this helps you out. Have a nice day!
Regards,
Nipun M
Applications Engineer
National Instruments

Using auto tune in garage band

i just downloaded the Auto-Tune 5 AU demo but i do not know how i use it in garage band 1 now, if anyone could explain it to me i would greatly appreciate it!
thanks, jball

can i further correct the audio notes somehow to be exactly on tune?
within its limits. too far off pitch and it will be corrected the wrong way.
manipulate it with my controller keyboard?
that would be something completely different, you'd want to create a SoundFont:
http://www.bulletsandbones.com/GB/GBFAQ.html#makesoundfonts
(Let the page FULLY load. The link to your answer is at the top of your screen)

Anyone using Antares Auto-Tune 5 with Logic Pro 8 on a Mac Intel?

I just bought the upgrade from Auto-Tune 4 to Auto-Tune 5 since v4 didn't work with the Intel machines, and I'm using a Mac Pro.
After trying to tune one simple part of one song, I'm going nuts. The plug-in is full of bugs, it seems -- mostly in graphical mode. Is anyone else either successfully using this set-up or experiencing major bugs with it?

I'm thinking it's an Intel thing.
When I try to use the various tools in the graphical view, the plug-in will just basically stop responding. I can't close out the plug-in window, and sometimes the "options" window of AT 5 will pop up for no reason and freeze. Its "cancel" and "OK" buttons are non-functioning at that point.
I've hard to force quit Logic a few times now, which pains me to say. Not to mention that it's setting my project back.
Antares doesn't have a forum, and I can't find anything else about this apparent anomaly online anywhere.
Unrelated: I've had problems with Drumagog in LP8 as well. If I try to drag the Drumagog pop-up window around the screen, the only thing that moves is the semi-transparent LP 8 "container". The actual Drumagog window stays put as the LP 8 window that frames the Drumagog window moves about. Very strange.

How to achieve an effect similar to this

I was wondering if an effect similar to the intro in this video can be done in Motion, and if anyone has any tips/tricks on how to go about doing it. Here's the video I'm referring to: http://www.youtube.com/watch?v=E4yFfCcg4Q8&feature=relmfu
I'm fairly new to motion, and everything I've tried in my attempts to recreate the water-ish effect flowing across the page has been pretty unsuccessful, so any thoughts or suggestions would be greatly appreciated.

hi
yes you could do something like this in Motion. Have a look at the Particle Emitters, there are a large number of prebuilt ones in the Library. Then you can animate it across the screen with a soft edged mask to bring it on and off.
hth
adam

After effects error invoking auto contrast- help!

Please can someone help me with this, as its driving me crazy and I have a deadline coming up!
Ok, I have a compostion in After Effects I was working on, but now when I go to open it I get the message "After Effects error: crash occurred while invoking effect plug-in "Auto Contrast". After clicking OK, I get another window saying "After Effects error: Crash in progress" as you can see from the attached images. Please can anyone help me open my file again, or at least recover my data from the project!? I've tried everything and anything already! By the way I have no problems with RAM or anything as my other compositions are ok.
Software- windows 7 64 bit
Adobe After effects CS6

Hello, I know it's been a while but I'll leave my two cents for anyone encountering this problem.
Adobe knows about this bug, and the solution they provide worked for me: http://helpx.adobe.com/after-effects/kb/crash-plugin-shadow-highlight.html
I know the article is about a bug while using shadow/highlights, but it can happen while working with different plugins, in my case, I was using Warp stabilizer and an adjustment layer above it with auto color, but it happens to different combinations, such as: paint & shadow/highlights, puppet & auto contrast, etc. Apparently, the streamline AE works with prefers footage with effects precomped before applying an adjustment layer to it.

Auto Tune 5 Demo + Garage Band Issues

Okay so I have an issssue. I have been using Garage Band 3 and trying out the Auto Tune 5 AU Plug-in Demo for the last few days. I had it assigned to be used in one of my tracks in a project i've been working on. Now, the demo has expired. When I attempt to open my project (that uses auto-tune), an auto-tune dialogue comes up informing me that the demo has expired. Okay cool, but then after I exit this box Garage Band has an error and exits.
I'm not sure what to do at this point, as I have deleted every trace of auto-tune using spotlight, both in the plug in folders and in the original downloaded files.

hmm i believe i already deleted the folder from there. i checked it out and its non existant.
when i search both terms in spotlight: antares, and auto-tune, both return with no results.
any other tips? is there a way to manage the plug ins with garage band within the program?
NOTE: I am able to access garage band if I enter a project that does NOT use the auto-tune functionality.

Auto tunning plug recommendation for Logic

anyone have experience with a really good auto tunning plug..for vocals.I am pretty decent vocalist..but the years are taking it's toll. I have tried the one in Logic and it's ok but I'd like to know if someone can recommend something better for Logic they use or have used. Thanks

The term "Auto Tune" comes from the Antares plug-in of the same name. It has become analogous with the term "Pitch correction", which is actually a better description.
The "auto" part comes from a mode within the Antares plug-in that will pitch correct on the fly, or automatically. If a singer is really close, and just has a few small problem spots, this mode can work wonders. But if a vocal performance is WAY off, you need to result to graphic mode, where you have visual feedback to work with.
I've used them all, but Melodyne gets my vote as the best available.

Why is it when i record a voice track, as soon as i add auto tune to it the voce goes glitchy?

Why is it when i record a voice track, as soon as i add auto tune to it the voce goes glitchy?

Which auto tune plugin are you using and without wishing to sound rude.. But do you know how to use it correctly?
What you are describing sounds like improper use of an auto tune plugin to me.... Time for you to check out any tutorials on YouTube for your plugin....

In Edge, is there a way to obtain an entrance effect similar to the "wheel" animation in powerpoint?

I am trying to use Edge to develop a set of interactive tutorials. I need to be able to have elements seem to be drawn onto the page in "real time." In Edge, is there a way to obtain an entrance effect similar to the "wheel" animation in powerpoint?

Thanks Paul,
I have a Reminder Table on which I store all reminders of Clients , Suppliers, Inquiries, Units tables
REMINDERS
        REMINDER_ID     NUMBER
     RECORD_ID     NUMBER
     USERNAME     VARCHAR2     20
     REMINDER_DATE     TIMESTAMP(9)
     MESSAGE     VARCHAR2     200
     ACTIVITY     VARCHAR2     1
     COMPONENT     VARCHAR2     8      I created a Calender on Reminders Table, when I click on an entry on that calender, I will be moved to a page 1 which contains a FORM on Reminders Table.... but the end user should be able to see the table record for which this reminder was created.
Thus, I had to create a REPORT on the same page 1.
the source of the report should be:
Select * from *:P1_COMPONENT* WHERE ID = *:RECORD_ID*
in RECORD_ID, I store the the ID of a client or supplier or unit or inquiry.
You said:
select * from :p1_x does not make sense. you are right.
for this reason I created corresponding VIEWS (v_Clients , v_Suppliers, v_Inquiries, v_Units. ) to the tables (Clients , Suppliers, Inquiries, Units...)
in COMPONENT, I store the name of the VIEW which contains only the needed columns of the table ( clients , suppliers ......)
I hope it is clear, and I hope that you help .....
Regards,
Fateh

Effects similar to auto-tune in CS5.5?

Similar Messages

Maybe you are looking for