Efi-1024.loader.dmg causes Intego Antivirus to freeze

My Intego antivirus freezes every time it gets to this disk image. and tries to scan the ._.Trash file within it. When I open Disk Utility it shows efi-1024 as a disk but does not allow me to unmount, verify or repair it. If I stop the antivirus scan the disk image disappears.
I have been running the Mac for about 4 months and the antivirus since I got it. This issue has come up only today.
Any ideas?

This comment applies to malicious software ("malware") that's installed unwittingly by the victim of a network attack. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an attacker who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files. The recognition database is automatically updated once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders. In most cases, there’s no benefit from any other automated protection against malware. Starting with OS X 10.7.5, there is another layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications that are downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Applications certified in this way haven't actually been tested by Apple (unless they come from the Mac App Store), but you can be sure that they haven't been modified by anyone other than the developer, and his identity is known, so he could be held responsible if he knowingly released malware. For most practical purposes, applications recognized by Gatekeeper as signed can be considered safe. Note, however, that there are some caveats concerning Gatekeeper:
It can be disabled or overridden by the user.
It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets (see below.)
It only applies to applications downloaded from the network. Software installed from a CD or other media is not checked.
For more information about Gatekeeper, see this Apple Support article. Notwithstanding the above, the most effective defense against malware attacks is your own intelligence. All known malware on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "trojan horses," which can only have an effect if the victim is duped into running them. If you're smarter than the malware attacker thinks you are, you won't be duped. That means, primarily, that you never install software from an untrustworthy source. How do you know a source is untrustworthy?
Any website that prompts you to install a “codec,” “plug-in,” or “certificate” that comes from that same site, or an unknown one, is untrustworthy.
A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. [Some reputable websites did legitimately warn users who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.]
“Cracked” copies of commercial software downloaded from a bittorrent are likely to be infected.
Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. No intermediary is acceptable.
Java on the network (not to be confused with JavaScript, to which it's not related) is always a potential weak spot in the security of any operating system. If a Java web plugin is not installed, don't install it unless you really need it. If it is installed, you should disable it (not JavaScript) in your web browsers. Few websites have Java content nowadays, so you won’t be missing much. This setting is mandatory in OS X 10.5.8 or earlier, because Java in those obsolete versions has known security flaws that make it unsafe to use on the Internet. The flaws will never be fixed. Regardless of version, experience has shown that Java can never be fully trusted, even if no vulnerabilities are publicly known at the moment.
Follow these guidelines, and you’ll be as safe from malware as you can reasonably be.
Never install any commercial "anti-virus" products for the Mac, as they all do more harm than good. If you need to be able to detect Windows malware in your files, use the free software ClamXav — nothing else.
Why shouldn't you use commercial "anti-virus" products?
Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the filesystem. Malware gets into the system by being downloaded, not by materializing from nowhere.
In order to meet that nonexistent threat, the software duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability and poor performance.
By modifying the system at a low level, the software itself may create vulnerabilities that could be exploited by malware attackers.
ClamXav doesn't have these drawbacks.

Similar Messages

  • Loading the latest OS on my iPhone4 caused the phone to freeze. I get error message 4013 when trying to restore the phone. Any help will be appreciated

    Loading the latest OS on my Iphone 4 caused the phone to freeze and stop working. I get error message 4013 when trying to restore the phone.

    Did you already try these suggestions?
    Check USB connections
    Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    copied from Resolve specific iTunes update and restore errors

  • Load Root cause table

    Hi All,
    I am having the requirement to load root cause into the sql table. Now, in the BOC documentation, it is said to use the LoadRootCause sample package. I am working in BPC 7.0 and is not able to find any such package in the example files. Please let me know what to be done in this case.
    Regards,
    Arun.

    Hi Patrick,
    Its not that easy for me (may be bcoz I am entirely new to this area, especially into thr SQL server ). As per the documentation, the data has to be loaded into the RootCauseEvent sql table. This table should carry one field each for al lthe dimensions in the application set. When I checked this table, at present ther is only one field corresponding to dimension ENTITY in the application set. So how to create rest of the dimension fields?????? So I hope there might be some coding (again I am not sure if the right term is coding, as I am extremely new into this) inside the LoadRootCause.dts package which enables rest of the fields also into the sql table.
    Anyhow thanks for the reply Patrick. Lets search more on this.
    Regards,
    Arun.

  • HT1689 I have bought a movie from iTunes it wouldn't load though cause of storage issues... Any way I could get a refund??

    I have bought a movie from iTunes it wouldn't load though cause of storage issues... Any way I could get a refund??

    Hi, Nselkhatib.
    You can report a problem with the purchase via the steps in the article below. 
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/ht1933
    You can also report an issue with this movie by accessing your purchases history in iTunes on your computer.
    iTunes Store & Mac App Store: Seeing your purchase history and order numbers
    http://support.apple.com/kb/HT2727
    Cheers,
    Jason H. 

  • What would cause adobe connect to freeze in a session for users, while the moderator session did not

    what would cause adobe connect to freeze in a session for users, while the moderator session did not

    HI rogerstam1
    Is screen being shared at that time when addin freezes?
    if yes if this coems again could you just stop screen share and try it again.
    hope this helps.

  • What causes a playlist to freeze, keeping me from arranging the play order?

    What causes a playlist to freeze, keeping me from arranging the play order?

    Try running these MP3 tracks though the MP3 Vaildator program that can be downloaded from the link below. 
    http://www.gromkov.com/faq/repair/mp3_validator.html
    B-rock

  • Computer is overheating - causes programs to keep freezing up.

    My computer over heats, is there anyway to fix this because its causing my finder to freeze as well as certain programs that I use. I did a disk repair and it seems ok, but when I use my computer now, sometimes the temp rises to 197-200 degrees. I monitor it with SMC fan control but have no idea how to run the computer cooler.
    Note. I do not have air conditioning in my house where I use my laptop.

    Hi
    If it's still under warranty I would get it seen by an Apple Authorised Repair Specialist or make a Genius Bar appointment. If it's overheating regularly and with little usage there's clearly a hardware problem somewhere. Possibly a failed or failing sensor? It may even be the main board?
    If you restart your laptop and hold down the 'D' key this should access the hardware diagnostic test. Run the extended tests. You may see an error message an error message at the end of the test which may give a clue as to what is going on?
    Be patient with the hardware diagnostic test as it does take a short while for it to kick in. This assumes the hard drive has never been wiped.
    Tony

  • How do I reinstall MS Word on MacPro.  WORD keeps causing my computer to freeze.

    How do I reinstall Microsoft WORD on my MacPro.  (WORD keeps causing my computer to freeze.)

    So, in other words, you got a folder like this in your Applications folder:
    And the Mac freezes when you double-click on these:

  • Firefox Olympic flame is causing my computer to freeze!!!!! Get rid of it please.

    Firefox Olympic flame is causing my computer to freeze!!! Get rid of it please.

    Thanks to all of you for responding. I appreciate your suggestions. At the same time, I just want '''FIREFOX TO REMOVE THE OLYMPIC FLAME''' which serves no purpose but to be annoying.
    Is a cutesy moving flame really serving any purpose? NOOOOO!!!!

  • On start up my mac book pro shows a white screen with a folder with a ? in it then switches to the apple symbol with the loading bar under it but it freezes about half way any ideas

    My mac book pro on start up shows a white screen with a folder with a question mark in it then switches to the apple symbol with the loading bar under it but it freezes about half way. Only started to have problems since upgrading to yosemite any ideas.

    I do hope you have recent backup, because it look like your hard disk is failing. You can start up in Recovery Mode, and run Disk Utility to see if the disk can be fixed:  OS X: About OS X Recovery - Apple Support

  • Why does the copy/move command cause the application to freeze up?

    The move/copy command causes the application to freeze up.  I am using PSE8

    The move/copy command causes the application to freeze up.  I am using PSE8

  • IPhoto 5.0.4 has suddenly stopped working. It loads the photo library and then freezes. Rebuilding the library has no effect which has about 3.5MB of data. PowerBook G4 OS 10.5.8

    iPhoto 5.0.4 has suddenly stopped working. It loads the photo library and then freezes. Rebuilding the library has no effect which has about 3.5MB of data. PowerBook G4 OS 10.5.8

    Create a new account (systempreferences -> accounts or Users & Groups on 10.7)  and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
    Regards
    TD

  • HT1723 Recently I bought a MacBook Pro, the first time I entered a disc into the disc dive it wouldn't load up in Itunes - just kept freezing; and the disc drive made a lot of noise, how can I fix this?

    Recently I bought a MacBook Pro, the first time I entered a disc into the disc dive it wouldn't load up in Itunes - just kept freezing; and the disc drive made a lot of noise, how can I fix this?
    I've had my mac for less than a month and for the first time I put in a disc. I can hear a laser sort of noise as well as the disc flapping about or a motor sort of sound? Sounds really bad to me :/
    Someone please help!

    Sounds like a hardware issue.
    Did you buy the system from Apple? If so how recent is recent?  If it is new you have 14 days to return it, not sure what the situation is with refurb systems. If it is over 14 days you should still have warranty support make an appointment at an Apple Store or contact Apple support.
    If you bought it from someone other then Apple you will need to contact them.
    good luck
    regards

  • A dvd caused my screen to freeze black why would it do that?

    a rental dvd caused my screen to freeze black & I had to shut down manually & restart.  Why would it do that- is it the dvd player, dvd itself? Does my mimi need a tune up?

    The first place I'd look is the DVD itself.  Reboot holding the (left) mouse button down.  That will eject the disc, and try another movie DVD.  If that fails, how old is the Mac Mini?

  • Commands cause Fireworks 8 to freeze (with Batch Progress dialog)

    I've been having consistent trouble with Commands in Fireworks 8 (on Mac OS 10.4) causing the application to freeze. Has anyone else experienced this?
    Here's the scenario: I use custom keyboard shortcuts to trigger commands such as ‘Blend Mode - Forward’ or ‘Increase Brush Size’ in order to speed up my workflow. After executing several of these commands, I'll be doing something simple like using the Selection Tool or adjusting layer opacity, and the application will freeze. A Batch Progress dialog appears ("0 of 0 files processed. Batch conversion  complete."), but it is unresponsive. The only option is to Force Quit the application and to lose any unsaved changes.
    This happens quite frequently. It is not a problem with any particular command; it happens with _all_ commands.
    In trying to fix this bug, I discovered something interesting: Every time a command is executed in Fireworks 8, it generates an empty FireworksBatchLog.txt file within my User/Library/Application Support folder (the same folder where custom Keyboard Shortcuts and Library Symbols are stored). Normally, a Batch Log is written upon completion of a successful Batch Process, and it includes useful information about what files were processed and how. In this case, however, the Batch Log text file is empty.
    Now, this Batch Log might just be a symptom of the glitch, as opposed to the source itself, but it clearly connects with the Batch Progress dialog that appears once the application freezes. Apparently, when commands are executed rapidly via keyboard shortcuts, this empty Batch Log gets rewritten every single time, and a relatively innocuous problem compounds itself and causes the freeze.
    I reinstalled the software, but the bug persists. I've also filed a bug report with Adobe—but would they even consider _looking_ at a bug if the sofware version is this old? It seems odd that Fireworks 8 is the only version never to have received an update. And yet this bug seems very matter of fact. I'm quite surprised that I can't find any other references to it online...
    If anyone knows of a fix for this, or can replicate the bug in their version of Fireworks, please let me know.

    I've been having consistent trouble with Commands in Fireworks 8 (on Mac OS 10.4) causing the application to freeze. Has anyone else experienced this?
    Here's the scenario: I use custom keyboard shortcuts to trigger commands such as ‘Blend Mode - Forward’ or ‘Increase Brush Size’ in order to speed up my workflow. After executing several of these commands, I'll be doing something simple like using the Selection Tool or adjusting layer opacity, and the application will freeze. A Batch Progress dialog appears ("0 of 0 files processed. Batch conversion  complete."), but it is unresponsive. The only option is to Force Quit the application and to lose any unsaved changes.
    This happens quite frequently. It is not a problem with any particular command; it happens with _all_ commands.
    In trying to fix this bug, I discovered something interesting: Every time a command is executed in Fireworks 8, it generates an empty FireworksBatchLog.txt file within my User/Library/Application Support folder (the same folder where custom Keyboard Shortcuts and Library Symbols are stored). Normally, a Batch Log is written upon completion of a successful Batch Process, and it includes useful information about what files were processed and how. In this case, however, the Batch Log text file is empty.
    Now, this Batch Log might just be a symptom of the glitch, as opposed to the source itself, but it clearly connects with the Batch Progress dialog that appears once the application freezes. Apparently, when commands are executed rapidly via keyboard shortcuts, this empty Batch Log gets rewritten every single time, and a relatively innocuous problem compounds itself and causes the freeze.
    I reinstalled the software, but the bug persists. I've also filed a bug report with Adobe—but would they even consider _looking_ at a bug if the sofware version is this old? It seems odd that Fireworks 8 is the only version never to have received an update. And yet this bug seems very matter of fact. I'm quite surprised that I can't find any other references to it online...
    If anyone knows of a fix for this, or can replicate the bug in their version of Fireworks, please let me know.

Maybe you are looking for

  • Windows 8.1 Flash CC 2014 Not responsive for about 30 seconds every 10 mins or so... Trying 30 day trial.

    I am trialing CC 2014 to open some files from an animator. It locks up all the time for between 10 to 60 seconds. It picks up fine once it wakes back up, but it happens very regularly and doesn't seem to relate to any particular activity. During this

  • Gross Price Condition problem in Import PO

    Dear Freinds, I have a problem in my Import Po . I have contract for this Po , but when i make a Po both my Gross Price condt P000 & P001 are populated & with price in both the condition . The users have made the Po without checking that the price of

  • Cannot open apps

    Most of my apps wont open... safari, logic, itunes

  • Incorrect Print Parameter

    Dear all, I get the following error msg Incorrect Print Parameter when executing an ABAP Program Variant in a process chain. Why is it doing a print and what does this msg means? any insight? ohya, the abap program DOES NOT call a printer function...

  • Experimental Web Keyboards for Special Characters

    Since the iPhone's current keyboard has only limited options in terms of characters, I put together a couple of experimental javascript keyboards for accented Latin, Russian, and Greek here http://homepage.mac.com/thgewecke/we.html http://homepage.ma