EFI Fiery Print Driver conflicts with OS X 10.6.5

I have tried updating my OS X 10.6 software with update 10.6.5 -- When I did this, whenever I print to our EFI Print Driver, my documents are turned 90 degrees. No matter what orientation setting I use, etc... the printout ALWAYS are turned 90 degrees from the way I need them.
This problem occurs in any program (Adobe InDesign, Photoshop CS5, Acrobat, Preview, etc...). I have tried twice and each time I use a Time Machine Backup Restore to get back to OS X 10.6.4 where the problem disappears. Is anyone else having this problem? How can I report this to Apple and Fiery?

I found the following post that addresses this question... thank you!
http://discussions.apple.com/thread.jspa?threadID=2644180&tstart=15

Similar Messages

HP DeskJet 2510 Printer Driver conflict in Windows 7 64bit

I have just changed my PC from Windows XP Home to a new machine running Windows 7 64bit. I installed the DeskJet 2510 printer from the CD/online and it was fine apart from a lot of errors in the Event Viewer:-
"The print spooler failed to load a plug-in module C:\Windows\system32\spool\DRIVERS\x64\3\UNIDRVUI.DLL, error code 0xc1. See the event user data for context information."
From looking on the web it appeared that the solution may be to reinstall the driver which I did, by uninstalling then completely reinstalling the Basic Device Software. Since reinstalling (several times now!) the HP Print & Scan Doctor is reporting a Printer Driver conflict and suggesting that uninstalling and reinstalling is necessary! As I havealready gone through this loop several times I am wondering if there is a bug somewhere.
The Test Print page is fine and everything appears to work correctly apart from continuing error messages as above, up to 4 at a time, mainly when printing envelopes from MS Word.
This question was solved.
View Solution.

hhhuummmm....
Maybe I have missed a step. Let's try opening the Device and printers, clicking on the printer so the Printer server Properties option appears, click server Printer server Properties, but then click back on the Device and Printers window. Delete the printer icon from here, then return to the Printer server Properties window and delete the driver.
If this works I am sorry I didn't think of it sooner
Keep me posted!
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Where can I find a print driver compatible with OS 10.7 for USB HP LaserJet P1006?

Where can I find and download a print driver compatible with OS 10.7.5 on iMac for USB HP LaserJet P1006?
Ran software update. Apple notes that a driver is unavailable, consult HP (who seems to offer only info but no software download available).
Any troubleshooting info or hints are appreciated.

Hi LPfromMA,
I'm sorry to hear you've run into difficulties finding the driver for your HP Laserjet P1006 for your Mac OS X 10.7.5.
I have included a document with the steps to download and install the driver for your printer and your Mac. It has a section for a USB connection. I have also checked HP.com and there is driver for Mac OS X 10.7.
OS X v10.7 Lion: Installing and Using the Printer with Lion
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02911238
Happytohelp01
I work on behalf of HP

Epson RX 700 DVD label printing - "driver dealing with CD printing is not..

Thank goodness I still have my PowerBook with Tiger 10.4.11 on it so I can print DVD labels. But I would like to be able to do this with my intel iMac with Leopard on it.
When I try to print DVD labels on my iMac with Leopard 10.5.3 using the horrible Epson Print CD software I am getting, "EPSON printer driver dealing with CD printing is not installed."
I searched on this message board and others have gone to the Russian website and downloaded the newer print driver which isn't available on the American website. I found driver 3.09, download it, and installed it. It shows up in English and everything LOOKs good.
Then I try to print from the EPSON CD Print software and it gives me this error.
Note that I also bought Roxio's Toast 9 Titanium with Disc Cover RE and try to print from that it and the print job gets all the way to the printer queue which tells me, "CD/DVD guide open". Well DUH, I'm trying to print the CD/DVD so I want it open, stupid printer.
Or I'm just being stupid. Help. Did I forgot to stand on my head, rub my stomach, pat my feet, and chant something before/after installing the new printer driver which is supposed to work?

I've done all that (exactly as it is suggested from the Epson support site) and I still get the same error. I called their tech support and they admitted that there is no real fix... only a workaround by doing a manual print. I had already figured that out, but all the instruction on their support site is useless.
My older machines work fine, but our new iMacs running Leopard will not print with Print CD.

OS X print driver problem with PDF (only)

Why is it that I cannot print a PDF (only – all other documents print fine) from my MacPro 5,1 OS X 10.7.5 to my HP LaserJet 4050N using the latest HP driver, but I have no problem whatsoever printing the same PDF to the same printer using the Gutenprint CUPS driver? With the HP driver I get spooling file 10% for an hour before I give up.
I have tried printing from Adobe Reader, Acrobat and Preview (all latest versions) with the same result.

Nuthin? Not even finger pointing?

Epson R2880 printer driver problems with Snow Leopard

I’m running 10.6.4 on a new Mac mini and I’m trying to print to a new Epson R2880. If I let the system choose the printer driver in the print and fax utility, I get a sort of generic print dialogue box without many options, but it prints. If I go into the print and fax utility and manually choose the driver, I get a different print dialog box with all the appropriate print options. I checked and it matches the screen shots for this printer that are posted on the Epson site, so I feel sure this the correct driver. However, when I try to print with this driver, I get this error message. Error:/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpll.app/Contents /MacOS/rastertoescpll failed.
This seems to be a common problem with Snow Leopard and the R2880 Epson printers, and it seems that most people are able to solve it by deleting the printer from the printer queue and resetting the printer queue. But that hasn’t solved my problem.
Here’s what I’ve done:
Manually deleted the Epson folder from the hard drive and trashed it, repaired disk permissions, uninstalled the Epson driver, updated software, downloaded and installed the Apple/Epson driver, deleted the printer from the print queue, and reset the printer queue. I’ve done all of these things several times over. And still I get the same error message every time I try to print from the driver with the print options. Does anyone have any other suggestions for a fix?

Some of the previous users had success when they restarted after deleting the /Library/Printers/EPSON and /Library/Caches/Epson folders. You might also try deleting the /Library/Cache folder. There is a solution posted from someone at Epson:
http://discussions.apple.com/thread.jspa?messageID=10909012#10909012
Substitute 2880 for RX580:
Make sure that you have completely removed the Stylus Photo RX580 driver, then install the new driver from System Update:
1. Power off the printer
2. Open System Pref. and Print/Fax
3. Highlight the RX580 printer
4. Click on the ""-"" sign
5. Close Print and Fax
6. Open your Mac's Hard Drive
7. Open the Library Folder
8. Open Printer and delete the EPSON Folder
9. Open the PPDs folder find the Epson Stylus Photo RX580.gz and delete the file
10. Close the PPD and the Printer folder
->11. In the Library folder, open the Caches Folder
->12. Delete the Epson folder
->13. Restart the Mac
14. Power on the printer
15. Click on the Apple Icon and System Update
16. Follow the directions to install the new driver
Hope this helps.

EFI Firmware / hard drive conflict

I have a third party hardrive running Snow Leopard, "EFI Firmware Update 1.7" caused a hard drive conflict so Apple Genius reverted to older version of EFI Firmware, told never to update to 1.7, will this issue be resolved if I update to OS Lion?
Thank You.

How did the Genius person revert the firmware to a earlier version?
https://support.apple.com/kb/HT1237
will this issue be resolved if I update to OS Lion?
Firmware updates come from Software update and are machine specific, regardless of OS installed.
Question is why don't you simply get your data off that problematic drive and onto a newer one?
https://support.apple.com/kb/TS1713

Help please - GB won't work - Midi driver conflict with Snow Leopard

I use Snow Leopard 10.6.8 on my MacBook Pro. Ever since I upgraded to this version GarageBand won't work. When I try to launch it I get 3 or 4 pop up screens saying GB has detected software midi conflicts please update your midi drivers. If I click through these and wait for 3 or 4 minutes, GB does open but it takes ages to change anything and it shows there is no Core Audio. It also won't 'Play' an already recorded track and there is no sound for anything.   I have several plugins Including Line 6 Podfarm, and the midi drivers for Melodyne and record through an old Tascam US122 with midi.
One driver for the Podfarm was automatically put in an incompatibel Software folder when I upgraded. I put this file in Trash and updated my Podfarm drivers but it's made no difference.
In GB Preferences it shows the Tascam US122 as my recording/playback and my midi device, but also 'no midi device detected' even though it is connected.   There are no driver updates for this old Tascam model.
Everything still works perfectly in Melodyne. How can I find out which driver(s) are involved in the conflict for GB? I have no guarantee that even if I buy a new Tascam interface, or any other brand, that GB will work, even then.
Is there a way to identify which driver, or drivers, are the problem? Surely that is not beyond what a MacBook Pro can do?

I should have mentioned I use GarageBand 2009. I've read other posts all over the web where people have trouble with this Tascam US122 but with the older Leopard versions. I had no problem with ordinary Leopard 10.5.6 - it's only since I upgraded to Snow Leopard, and it's only in GB.
I've tried a powered hub which has helped others, but doesn't help with my problem.
I reallly only want to know which driver/drivers are the problem.
Then I can work out a solution, even if it means buying a new interface. So long as I can't identify what the problem is, I'm not prepared to buy new equipment that might make no difference at all.
Bad luck with your electronic drums macuserrich - it's annoying isn't it!!!!

Printer Driver issue with iMac & HP 1200 Printer?

A friend has this combination, asked me to help him with a printer problem. The HP 1200 Laserjet shows in the "Printer Setup" window, is the default printer. The printer shows up in the hardware connected to the USB bus. BUT, when you try to print, the application printing goes through its normal print flush to driver. Then the printer icon down on the dock shows "waiting for connection," and times out in that state, never to actually print.
EXCEPT! When the guy unplugs the entire system (not the same for restart) and plugs it back in, the printer works, prints everything in its queue, UNTIL he puts the machine to sleep, then he's stuck again. What is happening? Anyone have a clue?

I would imagine he downloaded the latest driver for the intel based mac. Aside from that you can goto System Preferences > Printer & Fax > Printer setup > Printer setup utility(top of the screen) and reset the Printing system.

Print driver problem with OS 10.4.6

I recently installed 10.4.6 and ever since have been unable to print via a network on a Lexmark Optra T614 (duplex). All was working fine until the upgrade to 10.4.6. I have downloaded a driver from Lexmark's website and successfully installed it to my system via the wizard - message was "you have successfully installed . . . ". However cannot find it to install through the Print Centre. I am running it through a router shared with a PC (Windows 2000). No problems at the Pc end. As I said prior to purchasing 10.4.6 all was working fine. I have tried to set up to print through the local network via the PC - without success. At one point (not sure what I did) actually got the Mac talking to the printer. The lights were activated and it made a few attempts but then cancelled out. I then tried something else and it didn't work, so now I am back to where I was when I started. Can you help with this one Greg? regards Ian

Hi Greg, Still no answer to my printing problem.
The Optra T driver is probably right.
I trashed the drivers and did a fresh download and reinsatlled. It is an Optra T driver.
Since you can't print using generic postscript, I don't think you
have a driver problem. If the printer supports LPD or
IPP, you probably need to enter a device queue name
in Printer Setup. (No queue name for HP Jetdirect
protocol) L1, P1, LPT1, and print are common queue names
I have set up so that Printer Name is 192.168.0.200. This automatically selected Lexmark Optra T. Also the queue name appeared as 192_168_0200-1. Host name was blank and Driver Version 10.4 and PPD File Version is 10.4.3.3.0. I tried to print the Print box showed Preparing . . then Processing Page 1 and dissapeared in the normal manner. I opened the Printer Monitor (in the dock) and it showed the job in the queue as it should and the Status showed: printing. The blue bar scrolls and the message Connected to 192.168.0.200 comes up. The printer shows no sign of receiving the file. I have done this numerous times. I have also keyed in the computer name in the location and still no go - just the same outcome. The computer name is ian-brownlees-computer.local.
Look in the printer manual or google for it.
Unfortunately I don't have a manual but have been trying to locate one.
Any further clues??

Print driver problems with OS X version 10.4.6

I recently installed TIGER 10.4.6 and have been unable to print on a Lexmark Optra T614 (duplex). All was working fine until the upgrade to TIGER!! I have downloaded a driver from Lexmark's website and (supposedly) successfully installed it to my system via the wizard. However cannot find it to install through the Print Centre. I am running it through a router shared with a PC. As I said prior to purchasing TIGER all was working fine. Getting to the point of reverting back to 10.2.3 so I can actually do some work. Has anyone any suggestions - apart from reverting back to 10.2.3

I am having the same problem. My HO Deskjet 3620 was working fine till I upgraded to 10.4.6. Now I can't add a printer and I can't reinstall my priner software.
Power Mac G-4 Mac OS X (10.4.6)

Highpoint driver conflict with Blackmagic Decklink ?

a reader report over on the xlr8yourmac website notes a conflict between the HighPoint Technologies driver for the RocketRAID 1820A and the Blackmagic Design DeckLink 5.1.2 drivers.
http://www.xlr8yourmac.com/index.html#S20146

Thanks for this heads-up post, Andy.
I am ordering a Quad-core today, and I have an external SATA array. I don't have a BMD card, but I did anticipate the Highpoints Mac driver would need to be tweaked. They had to tweak the Mac driver for their PCI-X card as well.
Hopefully, I can wait for Sonnet to release a PCIe SATA card with at least four external channel ports. I'll need to delay or turn down any projects requiring uncompressed video until this is squared away.

Photoshop Elements 9 Printer Driver Problems with Canon MP600 printer

I'm having problems using my Canon MP600 printer with Photoshop Elements 9 with regard to the paper allocation. The MP600 has 2 paper trays and for some reason when using Elements it prefers you to use the top loading (auto sheet feeder) method all the time. For space reasons I need to use the bottom cassette. When you initially go into the settings for the printer within elements you can choose the cassette and paper type etc no problem and make a print. When you go back in to do another print it changes the setting back to auto sheet feeder so you have to change it back again which is winding me up! I have got the latest drivers for the printer and they are set up to how I would like the printer to work but Elements changes some of those settings for some reason. Does anyone know a way of fixing this please ?? When I'm not in Photoshop if I go to print something from the web it performs perfectly so I can only assume its Elements thats changing the settings.
Also when I print small thumbnail sized pictures on an A4 sheet of paper to test what the photo colour will look like when I go back into the print menu it puts the thumnail picture back in the center of the sheet of A4 rather than leaving it where it was, so then you have to put in the top and sideways measurements again to carry on ! The last version of Photoshop I had never did that. Does anyone know had to solve that problem ?? Any thoughts on the above problems would be gratefully recieved !

Thank you for your suggestions. I downloaded a more recent version of Twain, but this didn't help. I also tried closing and opening Photo Shop and restarting my computer without success. Reinstalling Photo Shop sounds like a very promising solution, but I'm not sure I will do it. In the meantime I can scan items using a printer program. These scans open in Photo Shop. It is an extra step.

Nvidia Driver conflict with 10.6.8?

I am having an Open GL issue that is very similar to the problems that were widely reported when CS5 and 10.6.4 came out except I am running 10.6.8 and CS 5.5. I'm also running a 2 x 2.6 Quad Core Xeon from late 2008 with 32GB of ram.
Issue Here: http://forums.adobe.com/message/3067743
Is anybody else having this? I'm going nuts and just lost a few days last week doing clean installs on a new system drive. I've heard general rumours that 10.6.8 is jacked...
The problem seems to be isolated to AE. I just did a multcam edit session in FCP for 30 hours this weekend and had no crashes. Opened up AE this morning and it happened right away.
I've updated to the newest Nvidia drivers. I went through all the general Open GL tweaks recommended by Adobe, still no go. I wasn't having this problem until I went to 10.6.8, though it was stable for a little while.
I either get the dreaded "Open Gl has caused a crash" message, or the system just locks up. I turn off Open GL, everything runs fine. I am just trying to use Open GL for preview, not for rendering.
Anybody?

Just wanted to let people know, after extensive testing on both my part and Apple's tech team, I traced the problem back to corrupt font that was crashing RAM preview based stuff in both MAYA and After Effects! Crazy. It even passed Suitcase Fusion, not sure what happened, but when I swapped fonts, problem went away...Hopefully this will save somebody else some hair down the road.

N95 device driver conflict with windows Vista Home...

When I connect my N95 to laptop and check in device drivers it comes up with a problem against the N95 mobile phone with the following windows message. windows does not offer a solution to this message either.
Message reads:Windows has stopped this device because it has reported problems. (Code 43)
This may also be the cause of nokia software update not detecting the phone as connected, even though Nokia PC Suite does detect phone?
I am usig latest update for wondows Home premium, and Nokia PC Suite.Operating system:
Microsoft Windows Vista
Build 6000
No service pack installed
Language: English
Language for non-Unicode programs: English
Locale: English
Input language: English
Nokia PC Suite:
Version 6.83.14.1
Language: English
Connectivity Cable Drivers:
Version 6.83.9.0
PC Connectivity Solution:
Version 7.7.10.0
Microsoft Outlook:
Version 11.0
Build 8118
No supported Bluetooth stack found

I have exactly the same problem listed above. I have a n95 and a pc with vista home premium. I cannot sync though pc suite says the n95 is connected. No sync setting appear when I click that button. I cannot update the phone software as it doesn't recognise the phone is connected and the device driver is disabled. I had a 6300 installed so I uninstalled that and it made no difference.

EFI Fiery Print Driver conflicts with OS X 10.6.5

Similar Messages

Maybe you are looking for