"efiboot from device: Acpi (PNP0AP0,0)/pci(1F12)/SATA(0,0)/HD(Part2,Sig1FC891DD-9674-42C9- AA78-207D0FBE67E9) boot file path: \System\Library\CoreServices\boot.efi

Hi!
My macbookpro 15" retina crashed down, it does not recognize my password anymore.
cmd+S gives :
"efiboot from device: Acpi (PNP0AP0,0)/pci(1F12)/SATA(0,0)/HD(Part2,Sig1FC891DD-9674-42C9-
AA78-207D0FBE67E9)
boot file path: \System\Library\CoreServices\boot.efi
I tried recovery OS without success.
Help please.

Got it thanks macjack . Command + S on restart.
In this case Nad69-Breizh did you try restarting with the option key down and re-selecting the boot drive.
If no Recovery option, try command option R for internet recovery. Takes some time to load up.

Similar Messages

MacMini 2010 4,1 how to run Apple Hardware Test from /System/Library/CoreServices/.diagnostics folder

I have a 2010 Mac Mini4,1 with SnowLeapard and plan to upgrade to Mavericks, but can't run Apple Hardware Test from my applications disk 2 that came with the machine. For some reason the Mac can read it and kicks it our after about a minute. Seems to be able to reado other disks, so this one may be corrupted. I found info on this community that says that the AHT is on the hard disk and I found it here /System/Library/CoreServices/.diagnostics using terminal. When open that folder using terminal it open a window with that folders contents. My problem is I can execute the only unix executable in that folder. It responds with "No application knows how to open /System/Library/CoreServices/.diagnostics/diags.efi"
Can someone help me out here or if there is downloadable somewhere on line that I can get?

My 2010 4,1 Mac Mini still has the HW Test on the Internal HD after updating it to Lion, Mountain Lion and Mavericks.
see > Using Apple Hardware Test
Additionally if your using a wireless keyboard and it is not invoking the Hardware Test using the D key immediately after the chine, then you may need to use a USB keyboard. Adding that any Apple, PC or generic Logitech USB keyboard should work for invoking the startup commands.

Installation of the Proof of Purchase from the ACPI table failed. Error code:0xC004F059

I just updated Window 8.0 to 8.1 for the second time as the first Time there was an UEFI issue... the 8.1 installs and update seemed smooth... I shut down, and I leave for work. I come home fire up my PC it seems slow!! it boots...
I notice some live tiles are active I prefer mine off so I shut off a couple Live tiles. so then I decide to open the Mail tile and it locks up... and then one of my browsers freezes up!!! I could not open task manager at all to end the
proses, so I decided to restart and then an app was not allowing windows to restart!!! so windows ended the task on its own could not make out what program or app it was!!! and the machine booted up slower again. I went into the event viewer
and what do I find in there is this stuff and now looking at it this all started after the windows 8.1 update... I get it we all want the latest and greatest OS but as my mom said good things come to those whom wait don't rush into anything!!!
and I think Microsoft you are rushing to push stuff out onto the Market... so now I have to sit here and wonder why my PC now takes 2 + minutes to load!!! (BS) and on win 8.0 it took 60 seconds... fix this please I will watch and see if
this happens again if it keeps up I will have to once again revert back to 8.0 and at that point I will want some $$$ compensation for my loss... why should I have to go through hoops for something with the word Mircrosoft attached to it...
I wonder how many others have had this same issue and don't even know its happening....
1.
Installation of the Proof of Purchase from the ACPI table failed. Error code:0xC004F059
2.
taskhostex (2888) WebCacheLocal: The shadow header page of file C:\Users\Dale\AppData\Local\Microsoft\Windows\WebCache\V01.chk was damaged.The primary header page (4096 bytes) was used instead.
3.
The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{362b48de-4382-11e3-be6e-3085a9a945d8}#0000000000007E00.
4.
Driver detected an internal error in its data structures for
5.
The program wwahost.exe version 6.3.9600.16431 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: e14
Start Time: 01cf3eb70280ca6e
Termination Time: 4294967295
Application Path: C:\WINDOWS\syswow64\wwahost.exe
Report Id: f7b4be2f-aaaa-11e3-8250-3085a9a945d8
Faulting package full name: Microsoft.SkypeApp_2.0.0.5011_x86__kzf8qxf38zg5c
Faulting package-relative application ID: App
6.
The program wwahost.exe version 6.3.9600.16431 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 15bc
Start Time: 01cf3eb66f89a193
Termination Time: 15
Application Path: C:\WINDOWS\system32\wwahost.exe
Report Id: 0fd54265-aaaa-11e3-8250-3085a9a945d8
Faulting package full name: microsoft.windowscommunicationsapps_17.4.9600.16384_x64__8wekyb3d8bbwe
Faulting package-relative application ID: Microsoft.WindowsLive.Mail

I have the something similar happening as reported in event viewer in the warning section:
System
- Provider
   [ Name] Microsoft-Windows-Security-SPP
   [ Guid] {E23B33B0-C8C9-472C-A5F9-F2BDFEA0F156}
   [ EventSourceName] Software Protection Platform Service
- EventID 1058
   [ Qualifiers] 32768
   Version 0
   Level 3
   Task 0
   Opcode 0
   Keywords 0x80000000000000
- TimeCreated
   [ SystemTime] 2014-08-13T04:35:49.000000000Z
   EventRecordID 80761
   Correlation
- Execution
   [ ProcessID] 0
   [ ThreadID] 0
   Channel Application
   Computer Monzworks
   Security
- EventData
   0xC004F059
installation of the proof of purchase from the acpi table failed 0xc004f059
My System Properties page says "Windows is activated" and a product Id is displayed. I am on a window 8.1 core OS after applying the update successfulling from Window 8. My computer is an AsusTek Computer Inc. ,
Asus Desktop PC CM1745 Series - 64-bit Operating System x64-based processor.
I had trouble with AODDriver4.2.0 causing errors because the system could not find the path, It turned out to be uncleared program remnants in the registry were looking for an old version of the driver, in the wrong place , instead of the current one.
Oh, and I tried sfc/scannow and DISM /Online /Cleanup-Image /RestoreHealth from elevated cmd prompt and elevated powershell ise everthing was reported with no errors and with powershell, the report said windows store corruption was repaired.
Before this I had used apps.diagcab and it said my IE 11's temporary internet files folder was in the wrong place that it was going to put it back. Well, it messed up my IE 11 so the folder location was in the same place but it was not listed in the
location:                 . <----- Just like this. Plus the amount of disk space available was 8mb-which messed up any sort of operations for example putting in a new search
engine could not be completed. I had to use a system restore.   I currently have no errors showing up but warnings yes. thankfully most are minor.This is the other event viewer report which could be related:
- System
- Provider
   [ Name] Microsoft-Windows-Security-Auditing
   [ Guid] {54849625-5478-4994-A5BA-3E3B0328C30D}
   EventID 5061
   Version 0
   Level 0
   Task 12290
   Opcode 0
   Keywords 0x8010000000000000
- TimeCreated
   [ SystemTime] 2014-08-13T03:48:26.671362500Z
   EventRecordID 290021
   Correlation
- Execution
   [ ProcessID] 676
   [ ThreadID] 728
   Channel Security
   Computer Monzworks
   Security
- EventData
SubjectUserSid S-1-5-21-4255092528-2166032690-2543152005-1002
SubjectUserName Monz Prez
SubjectDomainName MONZWORKS
SubjectLogonId 0x239d9
ProviderName Microsoft Software Key Storage Provider
AlgorithmName UNKNOWN
KeyName CD1CC265-0DA0-4230-8419-CB6F808FE688
KeyType %%2500
Operation %%2480
ReturnCode 0x80090016
I am tired so talk among yourselves.
Sincerely Tired

What kind of PCI Device is the NI-PCI 6519 card?

Hi:
I need to know what kind of PCI device is the NI-PCI 6519, according to the definition that appear on the link: http://www.microsoft.com/whdc/system/bus/PCI/pcibridge.mspx, under the title "Types of PCI Devices and PCI-to-PCI Bridges".
Is the NI-PCI 6519:
1.- a PCI-to-PCI docking bridge type?
2.- a reset-resistant SID PCI device type?
3.- a reset-loading SID PCI device type?
4.- a non-reset resistant SID PCI device type? or
5.- a multifunction PCI device type?
I need to know this because I have a problem with the PCI-to-PCI Bridge of my motherboard on the Power Management issue and it affects directly the PCI bus configuration of my system.
If someone knows the answer or knows somebody who knows the answer I'll appreciate very much his/her help; or maybe he/she could send me the contact to somebody.
Thanks in advance!

Ignacio,
The PCI-6519 is fully compliant to the PCI-2.2 specification which means that it requires the 3.3 V rail from the PCI bus. The 6519 must be installed into a slot that provides 3.3 V. Check that the 3.3 V LED located on the top right of the 6519 device is lit. If not, check that the PC motherboard provides 3.3 V to the PCI bus. I also believe that it should be a reset-resistant or reset-loading device, but if you feel that the board is not working correctly with your pci-to-pci bridge, I would recommend that you contact NI support directly.
Regards,
Erin Bray
NI Mexico
www.ni.com/soporte

Creation of flash file from Device Central failing

Hi,
I'm currently trying to create a new flash document from Device Central and the application is throwing the following error:
Cannot create new document. The xfl template document is either missing or corrupted.
I am also unable to test my flash files in Device Central via Test Movie.
This function was working fine until a couple of days ago.
Has anyone had any similar issues? I am running Master Collection CS5.5 for Mac.
Any assistance would be appreciated.

For anyone who has this problem in the future, I have managed to get it working again by doing a complete reinstall of Master Collection.

Administrator cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2

Hello, dear Colleagues.
User with administrators rights cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2.
If to launch "Devices and Printers" on server, all printer properties on "Advanced" tab are inactive (see screen below).
But I can change it manually with "Print Management". Features become active.
The main purpose - to uncheck "Enable advanced printing features" with powershell
scripts.
$erroractionpreference = "continue"
$colPrinters = Get-Wmiobject -Class win32_printer -computername print_server -Filter "Name like 'printer1' or Name like 'printer2' or Name like 'printer3' or Name like 'printer4' or Name like 'printer5' or Name like 'printer6'" # get printers on server and filter with names
ForEach ($objPrinter in $colPrinters) { # get printer details from WMI
If ($objPrinter.RawOnly -ne "True") { # check that Advanced printing fetaures is turned on
Write-host $objPrinter.Name
Write-Host $objPrinter.RawOnly
$objPrinter.RawOnly = "True" # Untick and update the object in WMI
$objPrinter.Put()
It works on Windows 7 workstation, but does not on print server Windows Server 2012 R2 with error
Exception calling "Put" with "0" argument(s): "Generic failure "
At \\print_server\c$\DisableAdvancedPrintingFeatures.ps1:8 char:17
+ $objPrinter.Put()
+ ~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : DotNetMethodException
Can you help me with that? Look like somethings with rights.
Thank you.

Hello, Alan
Morris.
Thanks for your reply.
I've tried to runs PS Script both locally and remotely, previously running Powershell ISE as Administrator.
I've noticed interesting thing - if to
check "Enable advanced printing features"
manually thru Print Management snap-in, script works fine. But, time to time after some manipulations on print server, this advanced feature returns to enabled state automatically by system, I think. In this case PS Script does not work. Next, if to disable
feature manually again (thru Print Management snap-in),
and enable manually again, PS Script will work. Very strange situation.
Thanks.

No data from device?

i'm working on a huge project in which i have to use many different videos, vhs, video8, dv and more. i use several devices to digitalize the analog stuff, f.e. a canopus advc 300 and a sony dcr-trv460e.
i've done this quite often, but now i have a problem i've never had before.
when i try to import footage from the sony dcr-trv 460e - connected via firewire - fcpx says "no data from device". i can watch the video in the preview, i can control the handycam (start, stop, pause), but fcpx won't import the footage, not a second, when i click on "import".
i'm able to import the footage in quicktime, even in imovie, but not in fcpx.
what's weird is, that i tried to import videos i already imported with fcpx some time ago, it worked then, but not now, very strange.
has apple made some changes in fcpx that make it impossible to import the old stuff? any idea how i could solve my problem?
2nd best would be to import the footage with imovie and then import the files in fcpx.
3rd best to import with quicktime…

Wolfgang Matzl wrote:
canopus works fine, as well as all other devices.
i have tons of tapes and tried a few, none worked.
i tried to capture on both my new imac and my mbpro, no way.
but now i'm sure there is something wrong with the sony handycam, i tried to import with my old final cut studio, and it's not possible, also. fc pro says: waiting for timecode.
so i'm confused now. does the sony dcr-trv not send a timecode? maybe, and this will explain the troubles. but on the other hand i imported successfully some footage with exact this device.
maybe i used the canopus then to correct the timebase, i can't remember how i did it. but this would mean i have to accept loss of quality, since i have to connect the sony with s-vhs with the canopus and convert it.
right now i'm importing a tape with imovie and will have a look how the result is, but as far as i remember, the audio has to be re-rendered when importing in fcpx…
My finger is pointing to a Timecode issue.
Is timecode enabled in the camera?
Is it continuous on the tape?
Al

"no data from device" when trying to capture HDV

I need to capture additional footage for an HDV project I am already editing. Capturing the initial footage (about a month ago) went smoothly. Now however, when trying to capture footage from a new tape shot just last week, I simply cannot. If I try to Capture Now, I get a "No Data from Device" message and the capture attempt aborts. If I log some clips and Batch Capture, the material cues and begins to play but the capture window just continues to say CUEING SOURCE MATERIAL and captures nothing. I am using the Sony HVR-M10U deck as a capture device.
The only thing that has changed between the original capture and this latest attempt is that I have also been working on a DV project at the same time, and I used the M10U to capture some DV footage for that project. In order to succesfully capture DV footage I had to force the deck to play only DV (by changing the VCR settings in the menu).
To try and capture this latest HDV footage, I went back into the menu and forced the deck to play HDV only. In searching for answers I came across this Apple article (http://docs.info.apple.com/article.html?artnum=302407) and followed those exact steps.
However, nothing seems to work. I do have device control and the timecode is being read off the deck in Log & Capture (so the firewire connection is fine), but there's no video in the preview window and no capturing is possible. I am able to open my DV project, reset the menu on the deck, and capture DV footage - but I can't for the life of me switch to capturing HDV footage.
Any bright ideas would be much appreciated - I'm really at wits end.
thanks,
Tom

I am having a similar problem with my sony HVRZ1U, I can capture dv through firewire no problem but when I choose easy setup for HDV it does not recognize the device.
Funny thing is I tried to download clips on a pc in Premiere with all the similar settings on my camera and it works fine, I have deck control and can capture HDV footage, so that rules out a problem with the camera. Back to FCP5 with the same settings and nothing.
Went through uninstalling quicktime 7.03 back to 7.01 - nothing
Deleted the preferences in FCP5 - nothing
Checked the firewire connections and cables - they work fine
Using all the right settings on the camera and in FCP5
The tape format was shot correctly
Any light on what could be going wrong would be very very much appreciated
Al

I'm getting a "No Data From Device" error for older video import

I'm trying to create digital video archives of some older (Hi-8) tapes before they turn to dust. I've got a Sony deck with iLink and have been using iMovie, which is time consuming but error free. I want to use the "Create Camera Archives" feature in FCP X, but am not able to import any video. FCP recognizes the deck, lets me control it and displays video in the capture window. But it does not capture anything - camera archives are empty and when I try to import the video I get a "No Data from Device" message over the import window, as the video is playing in the background. I thought it might be an issue of import settings... but I can't find any to change.
Any advice appreciated. Thanks.

Make sure all your settings are correct for capture and playback. Also make sure that the settings on the deck are the same as well. I know I had an issue when my Sony FX1 HDV camera was set to DV, FCP gave a similar error message.

ATV missing from Devices list: a slight variation

My aTV shows up in my iTunes Devices list ONLY when I tell the aTV to set up a new connection. The connection is always successful, and then the aTV vanishes from Devices, never to be seen again. I can successfully stream music, can view movie trailers over the internet with no problems, but I can't sync ANYTHING, particularly photos, because there's nothing in Devices. Also, every day, to start streaming music, I have to go to aTV menu, change source to aTV, then change source BACK to my PC, before it can find anything.
Setup: XP media center edition, everything is WIRED, Linksys router, both aTV and PC are connected to the same NetGear switch. I've made sure ports are enabled in firewall, but same behavior if firewall is completely off.
Any suggestions? (having read a lot of similar posts, I am NOT willing to dissasemble my phone, put it in a bag, tie a string around it, swing it around my head, and scream like a chicken)

My aTV shows up in my iTunes Devices list ONLY when I
tell the aTV to set up a new connection. The
connection is always successful, and then the aTV
vanishes from Devices, never to be seen again. I can
successfully stream music, can view movie trailers
over the internet with no problems, but I can't sync
ANYTHING, particularly photos, because there's
nothing in Devices. Also, every day, to start
streaming music, I have to go to aTV menu, change
source to aTV, then change source BACK to my PC,
before it can find anything.
Setup: XP media center edition, everything is WIRED,
Linksys router, both aTV and PC are connected to the
same NetGear switch. I've made sure ports are enabled
in firewall, but same behavior if firewall is
completely off.
Any suggestions? (having read a lot of similar posts,
I am NOT willing to dissasemble my phone, put it in a
bag, tie a string around it, swing it around my head,
and scream like a chicken)
yes I have the ExACT sae problem..bought the TV 2 days ago:
• cnnot see tv is itunes device list at all
• only see it when I disconnect and solicit a connection from tv/sources? ,,,
• can't see how to access my iPHOTO library
all else is very good.
will keep monitoring this thread.
G5 QUAD 8GB ram w/3.5TB + 2 x 15in MBPCore Mac OS X (10.4.9)

"error occured while reading from device"

when trying to sync our itouches the device is initailly recongnized in itunes and will begin to sync , but never gets through the whole proccess - each time it gets to a different step, but always ends with error message "ipod cannot sync as an error occured while reading from device" or something close to that...any ideas or help please....
i have checked the usb drivers...uninstalled and reinstalled itunes and removed the security software that I can find....

It could be to either a problem with a "file" that is either one the iPod or on the computer that is trying to be read for syncing. I would in order:
- Reset the iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod via iTunes. First from backup then to factory defaults/new iPod.

I can capture with iMovie 6, but not with FCP 6.0 ('no data from device')

I didn't have any problem with FCP 5, but am getting nowhere with FCP 6 using the same settings (I think). FCP seems to see the camcorder, but can't control it and, even if I manually start the camera, reports 'no data from device' when I do a 'Capture Now'. Device control isn't critical, but I'd sure like to find out why it doesn't see the data stream from the camera (Sony HDR-HC7 / FW400). I must be missing a setting some place, but sure can't find it. On the other hand, I have full device control and zero dropout capture with iMovie (exact same hardware configuration). Any ideas?

Wolfgang Matzl wrote:
canopus works fine, as well as all other devices.
i have tons of tapes and tried a few, none worked.
i tried to capture on both my new imac and my mbpro, no way.
but now i'm sure there is something wrong with the sony handycam, i tried to import with my old final cut studio, and it's not possible, also. fc pro says: waiting for timecode.
so i'm confused now. does the sony dcr-trv not send a timecode? maybe, and this will explain the troubles. but on the other hand i imported successfully some footage with exact this device.
maybe i used the canopus then to correct the timebase, i can't remember how i did it. but this would mean i have to accept loss of quality, since i have to connect the sony with s-vhs with the canopus and convert it.
right now i'm importing a tape with imovie and will have a look how the result is, but as far as i remember, the audio has to be re-rendered when importing in fcpx…
My finger is pointing to a Timecode issue.
Is timecode enabled in the camera?
Is it continuous on the tape?
Al

How do I copy files onto a hard drive (device) from Mac 2 7 pc. I'm able to transfer files from device but cannot transfer files to device. Anyone had same problem or can help solve this problem? Help pls

how do I copy files onto a hard drive (device) from Mac 2 7 pc. I'm able to transfer files from device but cannot transfer files to device. Anyone had same problem or can help solve this problem? Help pls

Welcome to Apple Support Communities
When you try to copy data to the external drive, what happens? If you don't see any error, the external drive is formatted in NTFS, and OS X can't write in it.
To be able to write on this external drive, you have to use an app like Paragon NTFS. Another solution would be to format the external drive in FAT32 or exFAT with Disk Utility > http://pondini.org/OSX/DU1.html Make sure you copied all the files of the external disk to the internal disk before doing it

I have installed ACDSee Pro3 and have problem to transfer photofiles from device: I got the message; The item could not be edited because you do not have sufficent access privileges or destination volume is no longer available." What can I do?

I have installed ACDSee Pro3 and have problem to transfer photofiles from device: I got the message; The item could not be edited because you do not have sufficent access privileges or destination volume is no longer available." What can I do?

Ask the ACDSee Pro support personnel.
With iPhoto that message means the library is a referenced library (photo not copied when imported into iPhoto's structure) and the source file is not where it was when first added to the library. I don't know how ACDSee works. Does it have a referenced mode as opposed to copying photos into its structure?
OT

IMac 7,1. Snow Leopard. 2 printers that printed nothing, or more than ±1/4 from page top. Reinstalled OS. Time Machine BU now allows only latest (faulty) files. ±4 series shown, each taking +8 hours to complete. How to reinstall from 'DEVICES' in 'iMac'?

iMac 7,1. SnowLeopard. 2 printers that printed nothing, or more than ±1/4 from page top.Reinstalled OS. Time Machine BU now allows only latest (faulty) files. ±4series shown, each taking +8 hours to complete. How to reinstall from ‘DEVICES’in ‘iMac’?

You need to get rid of MacKeeper (Zeobit). Do not use their uninstaller, follow the instructions here ...
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
When that is done there does not appear to be a lot wrong if you correct the red ink entries.
The 4Gb is sufficient for Yosemite though 6 or 8 Gb would be better. You may find the download slow so be prepared.

"efiboot from device: Acpi (PNP0AP0,0)/pci(1F12)/SATA(0,0)/HD(Part2,Sig1FC891DD-9674-42C9- AA78-207D0FBE67E9) boot file path: \System\Library\CoreServices\boot.efi

Similar Messages

Maybe you are looking for