EFT Addon Bank Reference Detail for Australia
In BP Card in Payment System tab there is a field Reference Details (OCRD.RefDetails), if you read the help file it states that this field will be used instead of the 'Refer to Remittance Advice' that appears in the Australian Bank Payment Addon tool. Unfortunately the note also says that this functionality is for the EU only.
Please can Australia have this functionality enabled, I have multiple client sites requesting this functionality enabled?
Edited by: Kevin West on Aug 18, 2010 4:05 AM
Hi,
You can try one thing - In target offset you maintain 2. This should make the value display from the 2nd position and the 1st will be a blank. Make sure that you increase the length of the field by 1, i.e if the length you have mentioned is 15, then maintain it as 16 and in the target offset give 2.
Please check and revert.
Thanks and Regards,
Anit
Similar Messages
-
Bank Payment Terms for Australia
hi all.
setting up banking info for australia. can someone explain the difference between payment terms B and T? the blatant difference is PMW but what is the business difference specfic to balancing record? (tcode is FBZP)
T -Transfer - AU_BECS - Domestic bank transfers/debit memos - RFFOAU_T
B - Transfer with Balancing Record - AU_BECS_B - Domestic bank transfers/debit memos with balancing record - RFFOAU_T
thanksHi
The payment block is fine, i can either add a new payment block reason or i can assign the existing block reason and i can proceed
But what ever you have said will not control my user with the solution we have give, then the system will run if my user did things on correct process
I suppose we can do a validation, for this customer group this payment terms are allowed.
Something like that.
Hope it will work, can you put your valid suggestion
So at any point of time, it cannot be done by any standard configuration - hope iam right
Warm Regards
Bala -
API for loading Bank account details for the Customer
Hi,
Can anyone tell me what is the API that needs to be used for loading bank account information for the Customer?
Thanks
GMHi,
Were you not able to achieve your requirement with Customer Interface Program?
There is a interface table 'RA_CUSTOMER_BANKS_INT_ALL' which is used to store customer bank account information. Run the program after inserting the records into this table.
I guess, there is no public API.
Regards,
Ram -
Good Day
I want to change the vendor master data and maintain the reference
details for a vendor/customer. And I would like to know the following :
1. What is the function of the reference field.
2. When I maintain the reference field will the reference appear on
the vendor/customer bank statement
3. Do I need to do anymore extra customising or config to ensure that
this reference appear on the vendor/customer bank statement.
Your speedy response will be appreciated.
Kindest Regards
Ropetra.Hi,
Modification of internal SAP object could be problematic. You are not advised to modify the length of the fields. However, if you are confident in what you are doing, you can modify data element via SE80 transaction. ABAPer would know what to do...
Regards,
Eli -
how do i change my bank account details for my direct debit for my sim only plan?
Hi there jeni24
Just need to ring Customer Care and they will change all your details.
-Kyle -
HT201303 How do I change the bank account details as I have changed banks
How do I change the bank account details for my iPad as I have changed banks?
If you are doing it on your iPad then try tapping on your id in Settings > iTunes & App Store and selecting 'View Apple ID' on the popup and login to your account - on your account's page there should be a payments link.
Or on your computer's iTunes you should be able to edit your payment info by going into the Store > View Account menu option and logging into your account, and again on your account's details page there should be a payment link. -
EDI-IDOC: want to generate Reference Specifications for Bank Details field
Hi Guru,
We are running to the situation that we use EDI with China vendor (using China bank account). The bank account for China has greater than 18 characters which is the maximum limit for bank account field. Based on note 96624, we are suggested to maintain the exceeding amount into the "Reference Specifications for Bank Details" field. However, when I run the payment on F110, IDOC do not generate the reference field.
How can the bank reference field be included in the IDOC?
Thanks,
SongHi Auro,
You use use EDI_DC-SNDSAD field, currently this field is used no where.
If you not sure where to see double control record and click address info tab
you can use either field receiver or sender.
For testing use WE19 transaction and pass your paymethod to following field
and then inform to EDI Mapper that your sending paymethod in this field.
For them this field is very easy to grab.
Let me know if you any concern.
Thanks,
Narayan -
Delete bank details for a BP in CRM 5.0, it doesn't get deleted from R/3
Hi,
When I delete bank details for a business partner in CRM, it doesn't get deleted form R/3.
Although I can see a green bdoc with confirmed status, with no errors. Any clue?
Regards,
KaushalYes, when I add a new bank detail, it gets properly reflected in R/3. The problem is only during deletion.
I think I've reached the solution - notes 1016909 and 941660.
Regards,
Kaushal -
Bank details for onetime vendor
Cant we maintain bank details for one time vendor any where?I want to make payment to one time vendors thru APP.
Please helpHi,
We cannot maintain Bankdetails for onetime vendor, since that is a control for onetime vendor.
Thats why we will select different Account group for one time vendor.
Since it is a one time vendor system dont want to keep data in Database.
Thats why we will give bank details while making payment.
Regards,
Hemanth. -
Hello,
how do I have to maintain the vendor bank details for an Indian bank? How are the country-specific settings for India in OY17?
We have the following informations from our vendor:
Bank name
Steet
City
Swift
Branch
1. USD A/c
2. EUR A/c
Which information do I have to store in which SAP field (e.g. Bank key, Bank account, SWIFT code, Branch etc.)?
Thank you already for your suggestions.Hi,
You need to maintain the following in the Payment transactions tab of the Vendor Master:
Bank Key:
Select from the Standard Bank Keys that are already available in the system. If they are not available, you can create in T.Code:FI01. If they are available but with incomplete details you can edit the changes in T.Code:FI02. The details like Code/Name of Bank Key, Bank Name, Address, City, SWIFT code need to be entered. You can give the Code/Name of the Bank Key same as the SWIFT code if you do not have any details about the Bank Key from the Bank.
Bank Account Number:
This is to be given in the vendor master.
Bank Address and SWIFT Code:
No need to give these as they already forming part of the Bank Key.
Branch Code:
Branch code is identified in the Bank Account Number itself for each bank. Hence, no need to give these details separately.
Regards,
Kiron Kumar T. -
Program for DMEE file for Australia (Westpac Bank specified)
Dear All,
Request you to advice me the program that we needs to assign at the payment method to down load the payment medium file (DMEE) in the format of West pac Bank in Australia if any..
I have a configuration requirement to down load the payment file from R3 ( after execution of F110 ) for the purpose of sending that to Westpac Bank (Australia) towards payments (Bank transfers) for vendors mentioned in that file. And for that I will have to create a new program to assign that in Payment Method so that we could able to down load the payment file in required format (Westpac). As i came to know that SAP provides various programs to fulfill the above requirement, Request you to let me know that program for Australia, so that i will use (Assign in Pmt Method) rather than creating new program.
Thanks in advance,
GopiHi,
Please check the program .. "RFFOAU_T".
Thanks,
Jagannadh -
Bank details for sales invoice
Dear Sirs,
I need to change bank details for c.code "X" and when I create invoice with vf01 the system to print in print form new bank details (IBAN, SWIFT, bank name). Please give me whith which transaction I have to do it.
Thank you in advance.
Regards,
Dani
Edited by: Daniela Vaskova Petkova on Sep 29, 2009 3:43 PMthe system to print in print form new bank details
Not sure whether your requirement is store the new bank details in billing document itself or just to fetch the changed data only to printing.
If your requirement is first one, that new bank details to flow in billing document, then try creating VF01 after changing the same in Customer Master of respective Payer. If I am correct, system will consider from master data.
On the other hand, if your requirement is second one, then take the help of ABAPer and achieve the requirement.
thanks
G. Lakshmipathi -
Update supplier bank details for already paid invoice
Hello, I have an invoice which has already been paid as part of the payments process. The problem is that the supplier bank information was not setup properly (the last one was end dated) and as a result, looking at the ap_invoices_all table, you will find that the external_bank_account_id column is empty. Is there a way to update this already paid invoice and set the external_bank_account_id for it as my custom report is missing the bank information.
Many Thanks.Hi,
u can maintain bank account details in vendor master......
payment terms too in vendor master for diff currencies.
Thanks
G.B -
my app market isn't reconising my bank account details when i try and purchase a app , it say for assistence contact support please help
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
I am trying to download FREE apps for my Ipad Mini however iOS is constantly asking me to verify my Bank Card details and not proceeding to download the app despite being free. Any help please ?
It just could be this;
Bank card authorization holds -
http://support.apple.com/kb/HT3702
If you can you can choose the None option and only put the card info in when you want to buy something. It also makes your account less suceptable to hackers as there is nothing that they can use to buy anything.
Maybe you are looking for
-
Hi, I'm designing my 1st website and I started it in photoshop cs5.5. I know that it's bad practice to build with images, I learned this too late. I imported my site into Dreamweaver cs5.5 and uploaded it to my server. The problem I'm having is that
-
How can I add my daughter to Find my friends when we have the same itunes account and that's how they make us log in?
-
so i got the update on my ipod touch 5th gen and i got asked me for my old itunes acount and password so i can get the back up from icloud, except i no longer have that info for the back up and it wont let me by pass at all, i need a way to just rest
-
Error in GENSTATUS during upgrade from CRM 4.0 to CRM 2007
Dear experts We have 12 errors in GENSTATUS after upgrading our CRM system from 4.0 to 2007. I don't know how to solve them - I had a look at SDN forum, OSS notes without success. Our system was previously connected to MSA but we want to turn it off
-
HT4864 How do I set up iCloud manually to use it for e-mail?
I see the IMAP and SMTP information, but do not know how to begin.