EH&S assigning template to Gen variant

Hi ,
I have copied WWI label template, say RAG1 to new label template RAG2. and assigned to gen variant
GENVAR1.
now when i execute the label output through CBGL_MP01,gen var GENVAR1 does not appear in label tree.
but when i assign the old template RAG1 , gen var appears in label tree.
Is there any other changes that needs to be considered for configuring to label output.
Regards,
Raghavendra

Closing the thread. Solved by me.

Similar Messages

How do I save vendor field in account assignment template?

I created an account assignment template in t-code VF60. However, when I try using it, the field 'Vendor' does not get populated with vendor number. All others, such as GL, D/C, amount & cost centers get populated. Any ideas why the 'Vendor' field with vendor number doesn't get saved/populated?
Thank you in advance!

refer to Note
503364 - Transaction variant not imported for all screens
546889 - FAQ: Screen variants in FI Enjoy Transactions
504784 - FI/MM: Problems with screen variants
501606 - FBV0: Transaction variant has no effect in Enjoy transactn

How to create a multipage PDF with same template but dynamically varying data?

Hello,
I need to create a multi-page PDF where I need to use the same template but dynamically varying data.
Eg Scenario:
1. I have data for 5 material in my ABAP program.
2. I have a PDF template in SFP which has a 2 page structure.
3. Based on the number of materials (5 in this case), I need to generate a PDF which will have 10 pages (2 for each material).
4. the generated PDF should be like the one shown below:
e.g. MATERIAL_PDF (pdf name)
      | Page1(Mat1[View1].data)
      | Page2(Mat1[View2].data)
      | Page3(Mat2[View1].data)
      | Page4(Mat2[View2].data)
      | Page5(Mat3[View1].data)
      | Page6(Mat3[View2].data)
         .. and so on...
Thanks,
Aniket

Isn't it just by setting the two pages into a form ( like an subform in the content ) and put the settings in a proper way?
There is this setting, that the masterpage comes up everytime the pagecount is done.
Example
Page 1 3 5 --> Masterpage 1
Page 2 4 6 --> Masterpage 2
And the designview with the flowing data, you can do it by scripting to get to the next page after the pos is finished.
Unfortunaly I do not got a system atm, so I hope the explaination give you a clue, where to search.
Regards
Florian

Assigning Different Fiscal Year Variants between comapny codes

Folks,
We have 2 company codes 1000 and 1010 both are assigned to controlling area 2000. I want to know what are the impacts of assigning company 1000 and 1010 to different fiscal year variants. I get this warning message when i try to save.
Please advice if this is advisable to do? and what are the impacts.
Message no. KT297
Diagnosis
Fiscal year variant K4, controlling area 2000, does not agree with fiscal year variant V9, company code 1010.
The following entries must agree:
Same number of posting periods (the number of special periods may vary)
Same period limits
Procedure
Ensure that the fiscal year variants of the controlling area and the assigned company codes agree. If necessary, maintain the fiscal year variants.

Dear Zaid Azam,
you have assigned 1000 and 1010 to one controlling area 2000,
To assign more than one company code to one controlling area the below are conditions
1) The Operative fiscal year variants in the company codes must match the fiscal year variant in controlling area.
2) The company codes must use the same chart of accounts.
So if you are assigning other fiscal year variant where the number of posting periods are different, hece system giving an error.
Thanks and Regards
A.Rama Krishna

Account Assignment Template not showing in FB50 screen

Hello all,
We are live on ECC 6.0 and we are dealing with one very strange issue. For some of the users, not all account assignment templates are showing in transaction FB50 under the Overview screen if you have turned on the Tree On option. Have you seen this before? Can you help me resolve this issue?
Many thanks.
Linus

Hi All,
I am having the same problem drivering me so crazy... and i have checked the SAP Notes like 201461;535225;425554;303505, all the notes was SAP small bug.......so i think maybe this is bug too.... hope somebody can give me some advice.. will be very appreciated.......
Question:
FB70--
In our company, just one user can automatically view all the u201Caccount assignment templates for itemsu201C created by other users.
But other users can not automatically view templates created by him, if they want to view it, must be added first (Add Account Assignment Remplate functionality).
Note:
u2022     I have simulated in DEV system, not because the role assignment. Not because the user parameter ID default..
u2022     Is there some control parameter for the specific user?
u2022     There are two tables for the templates:
KOMU -- for all the templates created by all the users.
PKOMU   -- for personal template spool.
Best Regards,
Pedro
Edited by: Peizhuo Guo on Sep 27, 2008 5:03 AM

High bandwidth utilization / Gen.variant.kazy virus issue

Hi All We are a business critical organization(bank).huge traffic is originating from main policy manager server.we analyzed the traffic and it's originating from f secure update port where all the policy manger proxies connecting to.traffic size is about 2gb.its been happening since friday.all virus databases are up to date and virus definition updates are very small.other issue is, Gen.variant.kazy virus is detected by f-secure but it cannot be disinfected or deleted.those are two critical issues that we are having at the moment.your early feedback is much appreciated Thank you

Hello Asanka,
Could you please open a support ticket with fsdiag so that we can take a look at your problem?
Please review the following articles concerning your infection:
https://www.f-secure.com/v-descs/other_w32_generic.shtml
https://www.f-secure.com/v-descs/rogue_w32_systemtool.shtml

Is the Trojan (Gen:Variant.Graftor , W32/Injector.AWSE!tr ) detected by FEP 2010?

Hello,
My security team wants to know if the Trojan (Gen:Variant.Graftor , W32/Injector.AWSE!tr ) is detected by FEP 2010. If yes, could anyone provide the link.
Regards,
Tarani Mishra

Ok, well, I was going by this part in the link I posted for Trojan:Win32/Yayih.A:
This threat is also detected as:
Win-Trojan/Yayih.4861440 (AhnLab)
Trojan.Win32.AntiAV.ptv (Kaspersky)
Trojan.AntiAV!zoXUT5UuOF4 (VirusBuster)
Gen:Variant.Graftor.15447 (BitDefender)
Trojan.Win32.Yayih (Ikarus)
Searching by the PostenTracking.exe name, I found this:
https://www.virustotal.com/en/file/66f54dc5d5ee2f0d6aceb49d5fbab94e272b780f3105cf7e02a3ddaa41f2a3fc/analysis/
Which indicates that Microsoft products are not yet detecting it.
If you are experiencing this malware in your environment and it's not being detected, you should submit a sample so Microsoft can get it added to the definitions...
https://www.microsoft.com/security/portal/submission/submit.aspx

About Account assignment templates

Dear Experts,
When user use FV70 Tree on button ,they can see all users Account assignment templates list,how to control use only see themselves account assignment templates,current user can not see another users account assignment templates?
Looking forward to your reply.
Best Regards,
Merry

Hi,
Definition: Account Assignment Category: - A key indicating whether an item is to be assigned to an auxiliary account (such as a cost center).
The account assignment category determines which account assignment details are required for the item (for example, cost center or account number).
Generally used Account Assignment Categories are Cost Center (K) in case of Miscellaneous Purchases, Assets (A) in Capital Goods Purchases, etc...
You can configure Account Assignment Category in Transaction OME9 OR you can go with following path;
SPRO > MM > Purchasing > Account Assignment > Maintain Account Assignment Categories
Her you have to perform following Activities;
1. Check the attributes of the account assignment categories
2. Maintain the account assignment categories to suit your requirements

Deleting Account Assignment Templates

Hello.
We currently have a large number of account assignment templates that are no longer being used. The problem is the employees who created them are no longer with the company and therefore can't delete them. Other users are unable to delete or make changes to these templates.
How do we go about deleting these old templates?
Thank you.

I found this thread because we received questions from users who wanted to delete Account Assignment Templates from collegues that have left the company.
We found that with transaction FKMT you can delete an Account Assignment Model, but not an Account Assignment Template which is made by an other user (in FB50). SAP does not allow you to delete them. You can remove them from your list in FB50, but they still remain in the datatable and can be added to your list. This can not be done centrally, but on user-level.
The only way to remove them from the database is by copying the ABAP code for the Account Assignment Template Remove-program and delete the function that checks if you are the correct user.
We have meanwhile decided not to do so. We added authorization object T_ASGTTNPL to the users so they can remove the templates from the list.

Account assignment template (FB60) Line item Value date

Hi Gurus,
I have an issue regarding the value date on line item level on Account assignment template on FB60. When user activates an Account Assignment template, on each line item system populates the value date equal to the date of the template creation date and not the current date. I created the template with several GL accounts and before saving it I deleted the value date from the line items. Now I want to reuse the same template after a week, it shows the correct GL accounts but with the value date equl to the template creation date (last week date). Any suggestion please, how can I fix this.
Regards,
Ahmad

In the IMG "Enter Global parameters" for your Company code change the status of the switch "Define Default value date" and then test.
Thanks
Ron

FB50: Account Assignment Templates

Hello Gurus-
I have a problem. My users have saved templates when using FB50 with G/L, D/C, Cost Center. When the template is saved, the Functional Area is populated. The template is saved and all is well.
However, when the user accesses that template again and completed the date, and amount, he/she gets an error "An entry in field functional area is not permitted". This then requires the user to clear out the functional area and then save again where SAP enters the same functional areas again.
Where in SAP, setting or whatever can this be changed so the user can proceed without clearing out the functional area.
There is no way to save the template without the functional area unless we do not enter the Cost Center.
Thank you.

Hi AMS,
The likely reason why you cannot save the account assignment template without functional areas unless you do not enter a cost center has to do with the fact that, either functional areas have been maintained in the various cost centers in KS01/KS03 or the G/L account requires an account assignment object which does have functional maintained in them.
The only way to avoid this is to remove the functional areas from the cost centers in KS02 which I will never advise you to do due to data inconsistencies. I would rather urge you to explain to users the main use/reason of account assignment templates.
Regards,
Elias
Edited by: Elias Akorli on Aug 4, 2010 12:59 PM

IW29- Set up and assign users to predefined variant in background

Hello,
I have created 25 unique variants for 25 different users in IW29. Is there a way that I can have the predefined varient be assign to the user without the user having to do anything. I want to roll it out so when the user logs in to SAP and access iw29 the variant will be already set for them.
Is this possible or do I have to go to each user, have them log in>find the variant> then have them save it?
Thanks.

Hi,
Yes, you should be able to do this by saving the variant in the format U_USERNAME. So save each variant again with the name matching the users id and prefixed with U_
-Paul

How to assign template design to 'Large View' of products

My template design works with the catalogues and lists all the products fine, but when you click a product for the large view/extra info etc, the template is all over the place. I realise this is because the template isn't set up for the extra elements in the product section, but I can't see how to add a new template to them.

As I described in the earlier reply, it's a CSS paths issue:
<link rel="stylesheet" type="text/css" href="css/site_global.css?260967060" />
<link rel="stylesheet" type="text/css" href="css/master_catalogue-master.css?3879925598" />
<link rel="stylesheet" type="text/css" href="css/catalogues.css?3924546827" />
Change them to:
<link rel="stylesheet" type="text/css" href="/css/site_global.css?260967060" />
<link rel="stylesheet" type="text/css" href="/css/master_catalogue-master.css?3879925598" />
<link rel="stylesheet" type="text/css" href="/css/catalogues.css?3924546827" />
As for applying the template, you can not apply it to individual products. You have to assign it per catalogue basis.
Cheers,
-mario

FB60 Account Assignment Template

Hello,
Is it possible to change the table setting configuration of a specific template without affecting the settings of the other templates? When ever I make the changes, I get a message that the changes have been recorded accross the system and I see that the other templates have been changed as well. Please advice.
Thank you and best regards!
Munair

hope to get some advice on this - Munair

How to assign object dependancies in variant configuration

Hi,
I had maintain object depedacies, but in BOM for a specific assembly, that object depedancies should come, for that where I have to assign that dependancies, if possible give me the whole proceedure for the object dependancy creation and assignment.
thanks.

Hi Samir ,
Is your material configurable ? If not , at first you need to create a confgurable material.
In material master Basic Data -2 , there is an indicator " Material is configurable ". Mark the same.
Only for configurable materials you find the object dependencies column in BOM .( CS01 )
Regards
Ramesh Ch

EH&S assigning template to Gen variant

Similar Messages

Maybe you are looking for