EHP missing in Mopz

Need Some Help:
I have downloaded installed and having running EHP 4 For SAP ERP NW 7.01. This is within the SLD maintained on the Solution Manager SMSY
I have it within the SMSY as Product SAP ERP, Product Version ERP 6.0 with ECC server flagged as relevant.
The SP level of ST is 26.
When I go into transaction DSWP and begin the Maint Optimizer and select the product and product version I select SAP ERP and SAP ERP 6.0 but I am not given the enhancement pack option. I am lost and have spent a lot of time reading and need your help. The goal is to geneerate the stack file to complete the ehp4 installation.
Thanks in advance.

Hi,
This problem generally comes if you register your system as ECC 6.0 system in SMSY. Since, you are saying you have already registered it as ERP 6.0 system then can you please delete this system from SMSY after removing it from logical system and then again configure it. Then see if it works.
Thanks
Sunny

Similar Messages

EHP 7 upgrade & Mopz in Solman 7.1 SP 8

Hi Everyone,
I am currently working on EHP 7 upgrade for my ECC 6 EHP 6 system. I began my work in ECC with SLD data push and SMSY, LMDB config, in Solman now moved on with MOPZ config to download EHP SPS. I have a query here, is it important to have the entire system data updated with SMSY and LMDB in Solman? i understand that MOPZ checks the current system Patch level from SMSY/LMDB and based on our target selection it calculates and recommends. just wondering how exactly it happens!. Bacause we have our BO system and few other non SAP systems in the landscape that are not updated with the SMSY/LMDB but they also should be considerd for the upgrade to check if there are dependencies.
so my question is, do we have to push data from non sap also and maintaine in SMSY and LMDB before we perform EHP SPS download from MOPZ?
other question is, if we perform upgrade in a ECC Sandbox environment (usually a copy of Production), it is not necessary to have sandbox for Portal, PI and other systems. so what is the recommended approach here? do we have to select the Developement ECC system from MOPZ so that we will have other Dev systems (PI, Portal.,..etc) present in the SMSY & LMDB and MOPZ recommendation will be perfect?
please help me understand this
Thanks,
Shiv

Instead of reviewing SMSY, you should switch over to the LMDB as it is the future for system data in SolMan.
The reason its telling you ERP 6.0 SPS25 is because it is not taking into account your Ehp, SAP still has to support customers who haven't taken the Ehp (perhaps unicode issues, 32 bit to 64 bit, etc) so this is a way to compare. I found a bar graph that explained this in a very simple picture, however I can't find it online and leads me to believe I read/saw it in a book. Also think of this my company is currently updating ECC from Ehp 5 SPS 4 to Ehp7 SPS 4, the SPS are the same due to the Ehp change and resetting the SPS counter back to 0, but in mopz I believe it shows SPS 28 or 29 for ECC 6.0; so essentially there is nothing you can or need to fix for the system data. If this is still confusing I will try to track down the bar graph example I saw.
As for logical components you can create your own (and is advised to do so as SAP could remove entries on you during a SolMan upgrade) so you could list it as z_ERP or zEhpERP or z_ECC; however it makes sens to you and your co-workers/customer, when you manage the system and the button that allows you to configure the system, the first section in the new window stays red until you assign a logical component to the system. So you might already have something assigned to the system(s).
SAP doesn't list it as BO, and I'm not sure if you can run a successful mopz on BO systems; if you leverage the PAM at SAP you can track down dependencies. I also believe Process Orchestration is only 7.3/7.31/7.4 which is compatible with Ehp 7.
SAP PAM: http://service.sap.com/pam
As for BO, do you have the following under the SWDC?
Installations and Upgrades - B" SBOP BI platform (former SBOP Enterprise)" SBOP BI PLATFORM (ENTERPRISE)" SBOP BI PLATFORM 4.1

Sap enhancement for ERP option missing in MOPZ

Hi All,
   I am working generating stack xml file for upgrading EA-HR and SAP-HR components*Source EHP7 SR1 new inst) , while generating xml file i need to choose HRRENEWAL Addon .
   I selected product version ERP6.0 and selected Add-on products , HRRENEWAL is not available there.
    Recently applied note 1940845 , before applying this note i can able to find HRRENEWAL under enhancement packages but after implementing the note i can able to see only two options(stackfile and Add-on's)

Hi,
But i am not able to find HRRENEWAL if i select add-on's , but when i select support pack stack->techusage(HCM)->add-on , here i can able to select hrrenewal.
Before implementing the note , i can able to select using enhancepackage option in 2.1 and now i am not able see the enhancement package option.
Before implementing the note
1. support packstack
2 enhancement package ( here i am able select add-on)
Now after implementing the note
1. support pacakage stack(here only i can able to select)
2. Add-on
As per note i am suppose get one more option also like Enhancementpackage/Add-on upgrade but this option was missing now.

Enhancement Package Installation option missing in MOPZ

Hello gurus,
We´re faccing with a problem with maintenance optimizer procedure.
I have an ECC 6.0 system installed with SPS16 and now we need to upgrade it to Eph4.
When I go to Solution Manager 7.0 Ehp1 (SPS22) to transaction mopz and create a new transaction, in step 2 "Select Files" on "Calculate download files automatically" window, normally two options appear "Maintenance" and "Enhancement Package Installation", but only shows "Maintenance" option. So, for our goal we need the option "Enhancement Package Installation"!
I already read the snotes 1122966 and 1139493 I take in count the prerequisites for enhancement package option in SMSY.
Another question, this problem may be related to any matter of contract,restrictions on our own contract with SAP?...
Can you help us to solve this problem?
Best regards,
João Dimas - Portugal

Hello frmshyam and all of others,
We already know whats happen... we contacted SAP people and they inform us that is a kind of limitation of the contract agreed by our company and SAP!
Inclusively we can check that when we try to download some ERP system DVD media directly from marketplace, we don´t see anything, we only see the media DVD´s of solution manager system.
Thanks anyway for your help.
Best regards,
João Dimas - Portugal

Missing "upgrade" radio button in MOPZ

Hello.
I've created a maintenance optimizer transaction in MOPZ for a BW 3.5, with the aim of selecting the support packages to be included in the Upgrade to BI 7.0 EHP2 .
The system is registered in SMSY as SAP NETWEAVER product, Product Version SAP NETWEAVER 04, with Application Server ABAP and Business Intelligence (relevant) flagged as main instances.
When I proceed with the selection in MOPZ, I can choose the Logical component, and then I get the screen for finding download files.
However only the Maintenance radio button is available, no upgrade.
Doing the same for a 4.7 R/3 , I can see both the Maintenance and the Upgrade button.
Any idea why the upgrade button is missing for the BW 3.5?
Any sugegstion for fixing the issue?
Thanks a lot
Dino

hello there,
upgrade to Netweaver 7 EHP2 is offered as of Solution Manager 7 EHP1 SP22. If you are running any lower Support Package level, then you get no option to upgrade Netweaver systems.
I hope this information helps.
Miguel Ariñ

MOPZ - EhP 3 -- EhP 4 - technical usages - ambiguities

http://service.sap.com/solutionmanager
--> FAQ
<...>
What are the benefits of Maintenance Optimizer?
Maintenance Optimizer simplifies the management of patches for the customer's SAP support staff and helps to reduce maintenance costs.
<...>
vs.
Note 1287216 - MOPZ: pre-select technical usages
<...>
The detection process implies some unavoidable ambiguities. It's a requirement to check manually, whether all of the highlighted technical usages have to be installed!
<...>
Although MOPZ has pre-selected the technical usages, user need to be careful of the selection. It's based on guess and not exactly correct.
<...>
- From where and how do I get the dependencies between the packages (e. g. the example that CWM needs FINBASIS, SEM-BEW and SAP_APPL)
- Why does MOPZ not resolved those dependencies automatically? If I need to do that manually, what is then the use of having MOPZ?
Markus

no answer - closing thread.

XML file not generate in MOPZ - system has not been registered in SLM

HI,
I need to install EHP4 in ERP 6.0. So to get the xml file i installed solution manager 7.0 EHP1 and post process of EHP1.
ST -400 -21
the important Notes i followed.
==================================================================
Note 1151784 - Setup of SL Controller for Live Update
Note 1145444 - SLM configuration
Note 1277035 - Solution Manager: EHP4 product data missing
Note 1122966 - Maintenance Optimizer: Notes for Enhancement Packages
Note 1137683 - Maintenance Optimizer: Notes for Software Lifecycle Manager
Note 1154188 - SLM web service authentication 700 SP14 ( SERVICE NOT AVAILABLE )
Note 669669 - Updating the SAP Component Repository in the SLD
Note 1244225 - Solution Manager 7.0 EhP 1: recommended corrections
Note 1137683 - Maintenance Optimizer: Notes for Software Lifecycle Manager
=======================================================================
Note 1334252 - SAP Solution Manager - Basic functions SP20 and higher ( this note contain post process of EHP1)
===============================================================
Still i am not getting the xml file of EHP4 for ERP 6.0.
I am getting the error "The system/systems - VMW, has/have not been registered in SLM"
Regards
Lee

hi Ruediger Stoecker ,
But the xml file didn't generate. that's why i worried.
==============================================
I tried with end of selection process in MOPZ upto "END Maintenance" phase. The XML file didn't generate.
Edited by: Lee green on Dec 23, 2009 10:10 AM

MOPZ - yellow warning does not allow to continue with generation of package

Hello,
Using Solution Manager (SM) to generate package and stack configuration
file for upgrade.
XXH is an HR, 640, with dual stack due to XSS. In SM, converted the
product version from ECC to ERP 2004 using SMSY_SWITCH_PRODUCT, there is no inconsistency.
Edited to add product instances - Portal Content and Enterprise Portal to link to XKP (JAVA system with Adobe Document Services, Application Server Java and Enterprise Portal. It is now showing in SMSY with the following product instances.
- SA ECC Server
- Portal content, pointing to another JAVA system XKP
- SAP NW - Entreprise Portal - pointing to XKP also
- SAP XSS - pointing to XKP also
In MOPZ, selected XXH, 'Upgrade with EHP' --> EHP4 on NW701. It shows the following warning
   Attention! Software Component Version ESA ECC-SE 501 is installed!
   Attention! Software Component Version BI CONT 3.53 is installed!
Then selected several technical usages
- ESA ECC-SE
- SAP ECC Server VPack successor
- Central Applications
- HCM
- Portal Content
- Portal Content Self Services
- HCM Self Services
- Self Services
However after the calculation it sill show the yellow warning below and
does not allow to continue, even if I try other technical usages.
Attention! Software Component Version BI CONT 3.53 is installed!
Anything missing here?
Regards,
Terry

Hello,
The document 'How to install EHP4' has the following
...' If you are combining the installation of SAP enhancement package 4 with an upgrade, you have to register the system according to the start release.'
Since it was ECC 5.0 and converted the product version (using SMSY_SWITCH_PRODUCT), it is 'SAP ERP 2004'.
The MOPZ log below, the first 4 lines are coming out as red
15:07:30       Attention! Software Component Version BI CONT 3.53 is installed!
15:07:30       Please check the instructions under the logging tab.
14:56:36       Please check the instructions under the logging tab.
14:56:36       Attention! Software Component Version BI CONT 3.53 is installed!
14:36:53       Attention! Software Component Version BI CONT 3.53 is installed!
14:36:53       Attention! Software Component Version ESA ECC-SE 501 is installed!
14:36:53       Product version of system not suitable for Netweaver
14:36:53       Technical Usage SCM .
14:36:53       Technical Usage ESA ECC-SE .
14:36:53       Attention! Software Component Version BI CONT 3.53 is installed!
14:36:53       Attention! Software Component Version ESA ECC-SE 501 is installed!
14:36:53       Please check the instructions under the logging tab.
14:36:10       Component BI CONT 3.53 without suitable Product Instance <--
The last line could be causing the error, but has not found any way to resolve it in SMSY. Any idea?
Regards,
Terry

SAP ERP6 product version missing in SMSY for EHP4 upgrade Solman 7

Hello
I am trying to install Ehp 4 but when i try to create the new system as SAP ERP6 in solution manager (SMSY )but product version is missing ?
iam now stuck any ideas will be welcome as i need to get the stack.xml inorder to proceed with EHP installer

Hi,
Check below notes before proceeding with EHP download in solman,sap has recommaned to apply these notes when we tried to download EHP,
Must Implemeted
1238929 MOPZ: Solution Is Not Selected in Work Center
1240389 Maintenance optimizer transaction with incorrect Java host
1243197 MOPZ: Add Caption for Product and Stack of Stack Delta XML
1246549 Status were reset to step 1 after Download Basket approval
1247550 present all avaliable systems in mopz step 1
1250781 SMSY: Error for Java system components from the SLD
1255219 Java systems w/o ABAP instance in maintenance optimizer
1262239 SMSY: Database name *LOCAL
1273095 SMSY: Incorrect database server (Java)
1306173 Maintenance Optimizer: Enhancement Package Stacks
1308152 MOPZ: Check configuration for stack delta XML generation
1311841 Maintenance Optimizer: Rename stack delta index file
1319083 Maintenance Optimizer: Technical corrections
1326123 MOpz: Error "Update product data in Solution Manager"
1357565 MOpz: Maintain a system where EHP is installed
1402615 Translate hostname in Mopz to lower case
1407905 MOpz: Error when withdrawing in step 4
Cannot be implemented, but manual steps must be performed.
1141296 Solution Manager: ERP product data missing
1165587 Maintenance Optimizer: Enhancement Package stack selection
1277035 Solution Manager: EHP4 product data missing
Between what is your present stack level of solman
Regards
Uday

AISUSER configured but MOPZ still giving SOLMAN_SAP_BACKEND007

Hi,
I have configured erverything on SolMan (EHP 1) to use Moptz but it seems it still not happy. i can skip the steps in Moptz to get to my download basket and confirm and download the packs but it seems when i want to find download stack files it says 3 lines of "Invalid user s##### when calling SAP backend system"
the details in Diagnosis are:
You did not enter a valid S user when you called the SAP back-end system.
Error text: SAP-OSS
S user assigned in SAP Support Portal: S000######
User in SAP Solution Manager: ######
RFC destination used: Internal MOPZ Error
- I have entered the user i log into SolMan and mapped that to my S-user
- s-user ID does exist on marketplace
- checked SAPOSS/SAP-OSS connections and they work
Is there something i have missed out?

Hello there,
Just some more troubleshooting tips:
- do you use more than one customer number? It might be that the S user customer number is somehow incompatible with the installation's customer number.
- What is the S user you entered in the Solution Manager RFCs that point to SAP? (SAPOSS, SAP-OSS, etc). Again, if the S user customer numbers and authorizations of this S user entered in the RFC destinations are incompatible with your user's S user, there could be issues.
I hope this helps.
Best regards,
Miguel Ariñ

Error Only one EhP release is allowed additionally

Short Text
Error Only one EhP release is allowed additionally:
Long Text
Hi experts,
I have installed EHP3 using transaction saint. Now when I try to upgradeto EHP4 , I am getting following error in MOPZ.
Error Only one EhP release is allowed additionally:
Information Make sure you have implememented note 1287216
Information Select at least one of the technical usages additionally:
Information *HCM - Learning Solution*
Information *Learning Solution - ABAP only*
But when I go back on previous screen
learning solution is greyed out and red,
HCM learning solution is also greyed out (not Red).
Even if I choose EHP3, still both these components are greyed out.
I have looked at note 1287216 and 1139602 but can't find what is missing.
please advise how can I make these 2 components selectable .
thanks,
Daljit boparai

Hi,
To apply these components have you generated xml file ? If yes, then is xml file contains these patches ?
Please check and revert back...
Thanks
Sunny

Missing business systems in model configurator

Hello,
i am on PI 7.1 and have to configure a SRM scenario. In step "assign communication component" (business system) in the model configurator all business systems are missing.
Please the screenshot:
[http://img211.imageshack.us/i/bild1m.png/]
What configuration is missing? In SLD all business systems with software are maintained.
Thanks for help
Regards, Trevor

Dear Trevor,
Let me solve your problem,
In the snapshot it says clearly that "Search Criteria" Communication Component Selection "Value" for Product SAP SRM 7.0
Which means in SLD it will search for the Business Systems which got assigned with Product SAP SRM 7.0.
So please check your SRM Business System "MSRCLNT001_SRM" and assign the Product SAP SRM 7.0 to it in SLD.
If you couldn't find the Product in the SLD then you must update your Content Repository to latest level SAP_CR 6.6 in SLD.
Please check the note for SAP CR Update:
SAP Note 669669 - Updating the SAP Component Repository in the SLD
Similarly you may face the problem for your ERP as well, so select Product SAP ERP 6.0 EHP 4 if you are implementing the same.
Hope this is helpful.
Regards
Praveen K

Missing entrys in SPRO after upgrade to FS-RI 6.60

Hi,
We've upgraded FS-RI 472 to 6.60 fp4. (R/3 470 to ERP 60 EHP 4)
Refering to the Release notes there should be some new entries under "Accounting", "Settings for Time Period".
There should be "Edit Financial Years", "Open and Close Accounting Periods". We only have "Edit Scope of Accounting Period".
Anyone have any idea? I guess I've missed some step in the upgrade.

Randy,
Looks like you need to add more space to /tmp directory as I see the following entries in CLONE*.error file.
CLONE2013-12-28_12-41-01PM.error:
=================================
SEVERE : Dec 28, 2013 12:42:46 PM - ERROR - CLONE-20275   Insufficient space to create /tmp/CLONINGCLIENT8522798570339051663.
SEVERE : Dec 28, 2013 12:42:46 PM - CAUSE - CLONE-20275   Minimum required space was at least "1,798" MB, but only "1,737" MB was available for use.
SEVERE : Dec 28, 2013 12:42:46 PM - ACTION - CLONE-20275   Make sure that the minimum required space is available for use.
SEVERE : Dec 28, 2013 12:42:46 PM - ERROR - CLONE-20233   Restoring Middleware home for sourceid "mwhome1@FMW_Home" has failed.
SEVERE : Dec 28, 2013 12:42:46 PM - CAUSE - CLONE-20233   An internal operation failed.
Thanks,
Hussein

Standard FICA datasoources ate missing- Alternative solution

Hi All,
Our ISU system is in ECC6 with out any Ehp. CRM-2005 is connected with ISU system through middleware.
We are missing standard FICA BW datasources( 0FC_BP_ITEMS,0FC_DUN_HEADER,0FC_DUN_ITEMS) due to unavalability of Ehp in the ISU system.
If Ehp will be apply to ISU system, CRM system need to be upgraded to CRM7 which is not feasible in current time.
As per BW implementation we need to use these extractors which are based on important FICA tables.As the base table for these extractors will have huge volume of data(Utilities Industry).
Request you to help us the alternative solution for this without upgrading any Ehp in the ISU system. If we will create custom extractors performance issue may come.
I have refered the Blogs where performance issue is mentioned for custom extractor.
Regards,
Asish

You listed two of the best options possible...
1) Upgrade ECC to EHP2 and CRM to CRM 7.0.
2) Create generic DataSources from the source tables.
The only other option you would have is to create a remote-enabled FM in your source ECC environment to extract data out of the source table(s) and insert into an ITAB, create an ABAP program in your BW environment that calls the remote-enabled FM and receives the extracted data ITAB and then load that data into a custom table in BW. Then create a generic DataSource on that custom table in BW. Realize, this would pretty much be the same as creating a generic DataSource on the ECC environment, but would be more easily replaced when you do eventually update and potentailly move to the standard content DataSources.

E-Recruitment and EHS - tables are missing ECC 6.0

Hello All,
We have recently noticed that we have tables missing in our SAP HCM and our EHS(Employe Health and Safety) Development Box. I am attaching the list of tables for review by all. Can someone tell me, please, if they know what these tables are for and if they are part of a note or submodule running off main modules for E-Recruitment and EHS. I checked notes in OSS but cannot find the tables for the EHS or E-RC modules.
We cannot find these tables listed anywhere. We are using ECC 6.0 and the BB installlment was for N. America.
<b>EH&S Tables</b>
CCRCC_CHCK_ON - EHS: Online Checks for Regulation/Scenario/Scenario Category
CCRCC_DET - EHS: Data Determination Modules per Regulation/Scenario
CCRCC_DETDOCTYPE - EHS: Modules for Regulation/Scenario/Scenario Category
CCRCC_EXCHG - EHS: Data Transfer from and to EH&S
CCRCC_FILTER - EHS: Data Filtering
CCRCC_LIMITG - EHS: General Quantity Restriction
CCRCC_LIMITS - EHS: Relative Quantity Restriction
CCRCC_MON - EHS: Monitoring Settings
CCRCC_PERIOD - EHS: Period Definition
CCRCC_SCENTYPE - EHS: Scenario-to-Scenario-Category Assignment
<b>ERECRUIT - PA-ER - E-Recruiting</b>
T77RCF_INCL2FORM - Assignment of Text Element to Smart Form Template
T77RCF_WL - Worklist
T77RCF_WLA_IDXGR - Index Group for Worklists
T77RCF_WL_ACT_P - Action Profile of Worklists
T77RCF_WL_OUT_P - Output Profile
T77RCF_WL_SEL_P - Selection Profile for Worklists
T77RCF_WL_SEL_PV - Values for Selection Profiles in Worklists
Points awarded!!

Hello Brenda,
I cannot speak for the EHS stuff but the tables you mentioned for E-Recruiting are part of the functional enhancements for e-recruiting 600 delivered with e-recruiting servie pack 7.
E-recruiting delivered 2 service packs which implmented new functioons. These were the e-recruiting packs 5 and 7. Futere enhancements will be delivered with the standard EhP (enhancement package) szenario - first of them is EhP3 for e-recruiting awaylable today if i remémber the schedules correctly..
You are probably missing these tables as you do not have installed the packages yet - so check your sp level. I strongly recommend you to upgrade to the newest service pack 11 for e-recruiting especially if you use / plan to use the webdynpro candidate frontend. But also for other implementation szenarios the sps are very urgent.
For the table in detail:
T77RCF_INCL2FORM - is a tablke for the new letter / correspondence change functionality using a dedicated changable text area in the smartform whixh has the advantage towards the old solution that changed correspondence can be printed propperly.
All other tables are part of the so called dashboard functionality.
You can find additional information on these functional enhancements in the software download centered of the sapnet under "Installations and Upgrades" -> "SAP Application Components" -> "SAP ERP" -> "SAP ERP 2005" -> "Documentation".
Best Regards
Roman Weise

EHP missing in Mopz

Similar Messages

Maybe you are looking for