EHP Package

Dear All,
I am trying to install EHP1 package on SAP EHP 1 for SAP Solution Manager 7.0 .
all the screen shots are in following url
http://www.sendspace.com/file/yaa13t
at last the below error message is comming .
when upNo OCS files were found for uploading
pl. advice

1) You select source SP19 to SP25. This is wrong, in this moment your system has SP18. Change the source calculation to SP18 and not SP19.
2) "Why Start SP = SP023 , It should be SP0018 Because my present SP Level is 18 ?"
This screenshot shows the kernel, this is correct, the calculation will take in account that you have at least kernel 701 with patch level 23 and you'll update to patch level 111
3) 3.     Do I require to download
a.     TREX 7.00 and Alternatives ? => It's not mandatory, if you want configure, use this link https://websmp202.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000725579&
b.     Willy Introscope Entpr MGR 8 and Alternatives
c.     DIAGNOSTICS Agent 7.11 and alternatives
d.     Will Introscope workstation 8 and alternatives
Download these packages if you want configure diagnostics, HIGHLY RECOMMENDED !
e.     SAP IGS 7.00 => decompress this package inside of kernel folder.
4) You have a very old SPAM level and probably a old kernel. Before execute this upgrade download and apply the latest kernel patch level and the latest SPAM 701.
5) In the download basket of your download manager, there aren't any packages calculated for ABAP packages. Probably these packages are waiting for approval. Go to service.sap.com/download-basket and check if the SAR packages are waiting for approval and open a message under component SV-SMG-MAI-APR to have your packages approved and download in the SAP Download Manager.
6) Follow carefully the details of notes below.
1244225 - Solution Manager 7.0 EhP 1: recommended corrections
1169247 - Upgrading Solution Manager 7.0 to 7.0 EHP1 (Stack 18)

Similar Messages

SLcM EhP 4 package

My company (Tomato System) is implementing SAP SLcM for 4th university targetting go live in Feb 2009. Prior SLcM implementation project was for Ssong-Shil University, and project went live in March 2008 very successfully in Korea.
Because some features of EhP package 4 (per SAP presentation doc) could be truely beneficial for university we are working with, so I am anxious to know the specific as soon as possible. If EhP4 will not be avialble for us to target version, I will have to develop "custom" SAP/Blackboard interface enither using SAP XI (PI) or RFC as interim solution which could be huge development worload/burden for nothing...
University will be implementing famous eLearning / e-education system so called Blackboard, so we are excited to know EhP 4 include LMS integrator ES besides other key features which will be very useful i..e post-event processing framework, attendance tracking.
Please, advise below:
1. When is official SLcM EhP 4 package release date?
2. Could SAP partner company get and review and test EhP 4 package ASAP?
3. Can we get detail EhP4 package documentation such as release note, training materials, etc?
4. My counterpart at Blackboard informed me of successful SAP/Blackboard integration story already?
Thanks in advance,

ERP 6.0, Enhancement Pack 4 is about to start ramp-up shipments planned release, Nov 21. Below is a link providing information for Partner participation in the ramp-up process and Ramp-up Knowledge Transfer (RKT) materials.
https://websmp207.sap-ag.de/partnerportal/rampup
https://websmp207.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000716134&
Note the unrestricted release is planned for Q2/2009, based on the overall feedback from the ramp-up customers.

Download EhP4 packages for ECC 6.0 including EhP1 for NW 7.0

Hi experts,
I have the following problem. I must update an existing ECC 6.0 system to NW EhP1. I found it is not possible to update only the NetWeaver but the whole ERP 6.0 must be updated to EhP4. The system is registered in Sol. Man. as ECC with no usage types. The MOPZ does not give me the option to download EhP packages neither it shows in the list of SP the latest SPs for ECC 6.0 EhP4/NW 7.0 EhP1. All the upgrade guides state that only MOPZ in Sol. Man. should be used for download because of the delta upgrades and the generated XML file.
Is there any other way to download the EhP4 packages and to upgrade the system except MOPZ and EHPI?
Thanks!
Pit

If you have 32 bit system, you can use SAINT to apply EHP4, but you will need XML file from MOPZ anyway. I would suggest you to register your system in SOLMAN SMSY as ERP 6.0 system.
Please check also:
https://service.sap.com/erp-ehp
and [THIS DOCUMENT|http://service.sap.com/~sapidb/011000358700000293582009E.PDF] will tell you more including setup in SOLMAN.
You will find all information there.

Risks for ongoing Dev-Transports during SP & EhP Upgrade

Hello together,
We are planning at the moment a Support and EhP upgrade for our whole SAP system landscape. We have one centrally ERP 6.0 System where at the moment all affiliates will be migrated into one client. So we have ongoing Roll-Out projects until 2012. During this Roll-Outs we want to Upgrade our SAP ERP system landscape with the relevant Support Packages and EhP 5 in the mid of the next year.
My question is, how should or must we handle the transports, if we want to implement the Support Packages and EhP in parallel to the ongoing Project Transport. If there are some objects affected of new objects coming up from the EhP Packages and affected also from development-transports from the projects. I think that could be a risk that the queue in the Q-System is not valid an we get an surprise in the productive system after transporting all transports form the Support packages and EhP Packages within the Project relevant transport in the P-environment.
So, how should or must we handle the Transports during this time incl. emergency Transports to keep always a valid transport queue in the Q-System for the P-System and to avoid an overtaking of Transports.
Thanks in advance for best practice, documentation and answers.
Best regards
Stefan Krogmann

As long as you don't activate additional functionality in the source/DEV system transports should be smooth. However, it's always advised as with support packages installations to keep the gap between DEV/QA/PRD as short as possible.
Markus

EHP Update

Hello,
I want to install the Enhancement Package 4 (EHP4) on our ECC 6.0.
Where can I check the actual EHP version that is installed on the system? Or if even an EHP package is installed on the system? Is there an special transaction-code available? Because in "spam" and in the menu "System - State" I am not seeing anything about the EHP.
Regards,
Rainer

Hello,
The easiest way to decide which ECC EHP is installed on your ECC system is to check the release of the component SAP_APPL. If the version is 603, it means you have EHP3 installed. If it's 601, it means you have EHP1 installed. If it's 600, it means no EHP is installed.
Best Regards,
Joe

Error during upgrade from sap R3 4.7 ext 110 to ERP6 EHP4

Dear all
we doing an upgrade in test server to ERP6 with EHP4,source release is sap Entreprise 4.7 110.We have copied all the required DVDs to the server .During the configuration phase while giving the EHP package we got the error.
EHP_INCLUSION.log details
4 ETQ233 Calling function module "SPDA_PREPARE_PATCH" by RFC
4 ETQ234 Call of function module "SPDA_PREPARE_PATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ010 Date & Time: 20100915210509
2 ETQ732 Package descriptions uploaded successfully
4 ETQ399 Looking for SAINT package for 'SAP_APPL' ...
4 ETQ399 R3upReadNewPackages:
4 ETQ399   patchType='U', langVect='DE'
4 ETQ359 RFC Login to: System="MBD", Nr="00", GwHost="saptest", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "spda_read_new_packages" by RFC
4 ETQ399   ismovesVersion='0'
4 ETQ399 R3upReadNewPackages: exit: rc=0
4 ETQ399      Found: name = 'SAP_BS_FND', release = '701', package = 'SAPK-701GGINSAPBSFND', type = 'AOX'
4 ETQ399             (not usable, different component
4 ETQ399 ... No matching package found.
Is this related to the current SAP_APPL support pack version ?.currently we have
SAPKH47031 SP 31 for SAP_APPL 4.70
Regards
Shahnas.S

> i have few questions regarding above
(Almost) all of your questions are answered in the note:
> 2.Do wee need to apply the above note for non-unicode upgrade
<...>
Even on non-Unicode system you should replace all matchcodes that are still required by search helps.
<...>
> 3.Note 1330256 recomends to apply support pack or to apply the Note 1330256 ,but we can do it only at upgraded version.
Yes - it avoids dumping with the dump mentioned in the note
> 4.How to identify the matchcodes
<...>
You can use the program TWTOOL01 to determine the existence of matchcodes.
<...>
> 5.How to delete them
<...>
You can then use the function module DD_MCOB_DEL to delete matchcode objects, and the function module DD_OBJ_DEL to delete matchcode IDs.
<...>
> 6.Impact of deleteing matchcodes
None since they were replaces by search helps.
Markus

Upgrade HR component after EHP4 upgrade

Hello,
Recently we did a upgrade from R/3 4.7x110 to ECC 6.0 EHP4 using CUUC method. For EHP4 in the MOPZ we selected some 5 usage types where HCM self services or Self services (XSS) was not selected. Now after the upgrade we hav SAP_HR in release 600 and level 045 and EA_HR is also in same level.
Right now we are trying to configure MSS and found business functions related to HCM are
missing in the backend system also when we tried to customize the Report launch pad we did not get the tab in SPRO. Can we solve this problem by upgrading SAP_HR and EA_HR to 604 release or we should add all the HCM related Technical usage types into the system to get them activated.
Because as per the link below we are not having the correct version for
SAP_HR and EA_HR.
http://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES
Please find the ERP EHP stack and SPS levels we are in at present:
ERP Stack:16
EHP:04
EHP Stack:05
We have PORTAL on NW 700 EHP1 SPS05.
Regards,
Yoganand.V

Hi,
> We will proceed and upgrade SAP_HR to 604, but the addon EA-HR also needs to be upgraded to EA-HR 604 and for this we >have to upgrade to EA-HR 601 and then go to 604, please share your thoughts on this.
As per EHP terminology, EHP packages are cumulative so when you will donwload all the packages from MOPZ, it will take care of all dependencies and download the file accordingly. Please check below extract from Technical FAQ guide:
We would like to clarify this without using the term "cumulative", as this term could
potentially be ambiguous:
u2013 You can install EHP4 for SAP ERP 6.0 in one step on 64-bit platforms without having
installed EHP3 before.
u2013 Every EHP version includes the content of any previous EHP versions. For example,
you cannot install EHP4 without getting the content of EHP3 and EHP2 as well.
u2013 Technically, SAP has started to deliver EHP software packages as delta packages with
EHP4 for SAP ERP 6.0. Thus, your EHP4 installation queue will contain EHP4 and
EHP3 packages if you have not already installed EHP3. However, all these packages
should be installed in one step on 64-bit platforms.
> Also before upgrading SAP_HR do we need to take backup of any tables related to HR, but right now in our system we >are not using HR.
Its not required as you are not using HR module earlier.
Thanks
Sunny

SAP_BS_FND addon was not selected as part of the stack xml

We are in a process of upgrading production system (SAP NW 7.0) to EhP1, we
have components SEM-BW,FINBASIS installed in the Netweaver system, we have added the system under Netweaver
We have generated the stack xml file using solution manager MoPZ but we are not
getting the option to select the upgrade addon SAP_BS_FND as part of
stack xml file
where in we had an option to select the SAP_BS_FND for Development
and Quality and we have included the addon SAP_BS_FND in stack xml file
my main question was why the component is not available for Production for selecting the option ??
Please suggest us how to proceed further, we have read the note Note
1326576 - SAP NetWeaver Systems Containing SAP ERP Software Components
which says to install the addon after upgrade
generating the stack file from Service Market Place too is not including the SAP_BS_FND in the stack xml
Please help why it is behaving different for production
Thanks,
Ravi
Edited by: ravi prasad on Aug 8, 2011 9:56 AM

Hi,
>The note says that if going with EhP1 with ERP components then it asking to register the system in Netweaver and then >upgarde the addon package with SAINT
You should read the note carefully, below is extract from this note:
Maintain your SEM, E-Recruiting or SAP Learning Management system as an ERP
system in SMSY in order to download the EHP packages and to be able to
maintain the system. Afterwards you must not use the generated Stack XML,
but instead use a generated Stack XML from SAP Service Marketplace and
include the packages for ERECRUIT, SEM-BW, FINBASIS or LSOFE in the
IS_SELECT phase during the installation of EHP1 for SAP NetWeaver 7.0.
Thanks
Sunny

Product Version SAP ERP 6.0 Missing from solman 7.0

Hi All,
I have installed an ECC6 system and now i need to configure the solution manager and download the support packs
and xml file for EHP4 upgrade. I have done this before where in i configure the new system in SMSY as SAP ERP 6.0
and then configure maintenance optimizer and it gives me the option of Enhancement Package Installation.
However now in the current solution manager i dont see the product version SAP ERP 6.0 when im clicking
trying to creating a new system.
Our Solman version is 7.0 . I tried creating my new system under SAP ERP EHP as ehp version 1 and used maintenace
optimizer but it does not give me the option of EHP package installation. Can any one let me know how to address this
issue??
Regards,
Ershad Ahmed.

Hi,
Goto Tcode SMSY
1. Under Landscape Components --> Product Systems --> Select ERP --> Under that select your system ID and click on it,
Goto --> Header Data on your right side, change the Product Version to SAP ERP 6.0 and SAVE.
2. Goto System Groups and Logical Components --> Logical Components --> SAP ERP --> Create NEW Logical Component for your ECC system under this component and select Production version as SAP ERP 6.0 & assign ur system then SAVE.
3. Goto System Groups and Logical Components --> Solution Landscapes-Operations --> Select your system landscape and REMOVE your ECC systen form the Solution and SAVE.
4. Goto System Groups and Logical Components --> Solution Landscapes-Operations --> Select your system landscape and ADD your ECC system form the Solution and SAVE.
Regards
Kannan.K

Unable to find the Add-on SAP_BS_FND Keep with Vendor Key

I am upgrading from EHPI Support Pack Stack 3 to Stack4, I am now stuck at the Configuration stage of the roadmap phase IS_SELECT - Keep the present version of the add-on (Keep (with vendor
key)). I wanted to keep the add-on SAP_BS_FOUNDATION with Stack 3 asthere is no Stack 4.
How to find the Key information or the note. Also please find the attached Screenshot of the same.
Regards,
Karthik Ravoori

Hi Mukesh Kakani,
In case you have installed an SEM, E-Recruiting or SAP Learning Management system, which technically means that an SAP ERP software component (ERECRUIT, SEM-BW, FINBASIS or LSOFE) is installed in your SAP NetWeaver system, you must not use a stack configuration file created for an SAP ERP system. Instead, you have to use a stack configuration file for SAP NetWeaver (either downloaded from SAP Service Marketplace or created by SAP Solution Manager Maintenance
Optimizer)."
So you qualify in this pre-condition: you have SEM-BW and FINBASIS installed on your NetWeaver system
"Maintain your SEM, E-Recruiting or SAP Learning Management system as an ERP system in SMSY in order to download the EHP packages and to be able to maintain the system. Afterwards you must not use the generated Stack XML, but instead use a generated Stack XML from SAP Service Marketplace and include the packages for ERECRUIT, SEM-BW, FINBASIS or LSOFE in the IS_SELECT phase during the installation of EHP1 for SAP NetWeaver 7.0."
In order to for you to proceed, you are able to apply SP4 using SPAM and JSPM. But when upgrading the next system in your landscape, please alternate XML file as proposed above. This will prevent the installation of the ECC component SAP_BS_FND and avoid the reoccurance of this issue.
Regards
Karthik Ravoori

Language Packages for SAP ERP 6.0 EHP 4 (NW 7.01)

Hello,
I have installed EHP4 + NW 7.01 on a running ERP 6.0 system with SAPEhpI.
Now I am not really sure if the implemented languages are also "upgraded" successfully.
The following languages are implemented additionally:
Serbian (latin)
Slovakian
Ukrainien
Romanian
Hungarian
1st question:
When I execute SMLT, there I can see the languages with a green traffic light.
But when I look in the "Detail Information" I can see some warnings (screenshot: http://img175.imageshack.us/img175/2291/ehp4system.jpg) for example:
"System component: EA-APPL 604 <- 600".
Is the language-part of this component still on release 600?
In cause of that I have to implement the specific packages?
2nd question:
I also execute the report "RSTLAN_IMPORT_OCS" in SE38.
Here it displays some "red marked" components which I must implement and some "yellow marked" components which I could import for this language.
The red marked components are sometimes old releases for example ST-PI 2005 but 2008 is already installed.
Is it needed that I reimplement all of this displayed packages for the language?
Thank you for your help.
Michele

Hi,
Please kindly check the SAP note 1402868.
This note refers to language on EHP4.
After the EHP, some packages are delivered, and for those packages, the
Language Supplementation is required.
Please refer to the sap attached note 330104.
This note explains about the packages that need supplementation after
the EHP.
Regards,
Paul

EHP 2 - Portal relevant Business Packages

Hi there,
is there a way to got the (new/changed) Business Packages exactly for SAP NW Portal 7.0 EHP 2? I could find https://websmp203.sap-ag.de/erp-ehp, but nothing specially for the Portal.
Thanks for help.
Regards,

This depends on what business packages you need (which backend systems you want to connect) and which ones you have installed.
The best way to find out is to create a MOPZ task in the SolMan, it will show you what will be updated.
Markus

Business Package for ECC6.0 EHP 4 Installation Guide

Hello Experts,
We have a reqt to install BP for ESS MSS compatible with ECC EHP 4 and identified below versions
BP ERP05 ESS 1.41
BP ERP05 MSS 1.41
BP ERP05 COMMON PARTS 1.41
BP ERP05 BUYER 1.41
BP ERP05 HR ADMINISTRATOR 1.11
....few others
Queries below -
1 - Link : [http://help.sap.com/erp2005_ehp_04/helpdata/EN/76/77594d165144a1a9bff9aae1e26b26/frameset.htm] under prerequisites : Business Packages are mentioned:
○       Business Package for Manager Self-Service (SAP ERP) 1.3
○       Business Package for Common Parts (SAP ERP) 1.3
○       Business Package for Project Self-Service (SAP ERP) 1.0
○       Business Package for HR Administrator (SAP ERP) 1.1
Should we upload the above BP before we deploy main packages like ESS 1.41, MSS 1.41 and HR Admin 1.11?
2 - We need to download and install BP from both paths - "installation and Upgrades" and "support packages and patches" in SMP one after the other?
3 - Installation sequence to be followed is PCUI_GP followed by Common Parts?
4 - I am unable to locate any proper installation guide for BP.
Thanks for your inputs,
Dhanz

Hi Dhanz
See the following guide for details
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0df0afb-44fb-2b10-46b1-c026264bcbc4
In order to calculate which SP packages to download from /swdc please see
https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/marcio+leoni
--->HOW TO GET RID OF SP STACK MISMATCH ISSUES
This tells you which BP or XSS packages work together and which back-end SP levels works with them
Good luck
Stuart

EHP and Support packages

Hello,
Im going through this document;
Master Guide ; SAP Enhancement Package 5 for SAP ERP 6.0 Powered by SAP NetWeaver
Using SAP Enhancement Package 5 for SAP ERP 6.0 and SAP NetWeaver 7 including Enhancement Package 2
Im having a point to clarify;
SAP enhancement packages have Support Packages of their own that are equivalent to the Support Package versions of the underlying SAP system.
We highly recommend installing the enhancement package in combination with the latest available Support Package stack. This approach reduces installation, modification adjustment, and testing effort. Using this strategy, you can install SAP enhancement packages as a normal maintenance activity together with Support Package stacks.
Whats meant by ;
SAP enhancement packages have Support Packages of their own that are equivalent to the Support Package versions of the underlying SAP system.
We highly recommend installing the enhancement package in combination with the latest available Support Package stack.
Can you help me to clarify this with an example
regards,
Zerandib

Hi,
Let me give you some basic example to make this statement clear.
We should first of all distinguish between the terms upgrade and update.
UPGRADE means from one Major release level to Another Major Release. Eg: R/3 46C to ECC 6.0
UPDATE means it can be either support package for installed components or Enhancement Packages for existing component.
Instead of upgrading the the entire RELEASE SAP has come up with EHP updates. This give you all major new changes without
doing a complete release upgrade. Also Downtime is reduced.
Consider this component
SAP_HR     470     0010     SAPKE47010      R/3 Enterprise 4.7 system
If this is upgraded to EHP 5 then the naming convention becomes
SAP_HR     605     0043     SAPKE60543      ECC 6.0 with EHP 5
Just like how we have support packages for each component. WE have support packs for the enhancement packages too.
More information can be pbtained in the below link
http://service.sap.com/erp-ehp
Refer to this SAP notes for further understanding.
1484460 EHP5 for SAP ERP 6.0 SP Stacks - Release & Information Note
1064635 SAP ERP Enhancement Packages: SP Stacks Release Info Note
1298878 Installation of SAP Enhancement Package 5 on SAP ERP 6.0
774615    Support Package levels of ERP/ECC installations/upgrades
I hope I was able to clarify your questions.
Regards,
Naveen.
Edited by: Naveen Kumar on Feb 29, 2012 10:41 AM

Installing support package 16, 17 and 18 for Netwever 7.0 (ECC 6 EHP 3 )

Hi I just want to know if we can directly load SP for Netweaver 7.00. I just went through some doc but they said we can upload SP directyl from SPAM tcode. can we install it from SPAM tcode i have component SAP_BASIS SP 16, 17 and 18. i downloaded SP using Solution manager i am at implementation phase in the same. i am bit confused should i proceed with SPAM ( but i tried upload package option is greyed out there).
any suggestion will be appreciated.
Mani

Hi Mani,
Follow this,
http://help.sap.com/saphelp_nw70/helpdata/EN/a7/a7a932845c11d2b421006094b9ea64/frameset.htm
- 000 client
- modifiable status of client.
- don't use DDIC/SAP*, use a user with full authorization
Question on Appying NW Support Package Stack
Please note that both individual Support Packages and SP Stacks are Non-cumulative. This means that, when you import Support Packages, then you import a gap less series of Support Packages and, if
you use SP Stacks, you also import these without a gap. The only exception is the Support Package for SPAM itself. & Java support packages which comes in SCA format.
Uday, Did you try to copy from what I posted?.. the correct procedure would be to direct to the original link.. not CTRLC & CTRLV!
Regards,
Debasis.
Edited by: Debasis Sahoo on Apr 22, 2009 1:04 PM

EHP Package

Similar Messages

Maybe you are looking for