EHP1 for ecc 6.0

guys,
i am trying to find the release notes for ehp1 for ecc 6.0 but cant find them. The marketplace contains only the links to ehp2, 3 and 4. Does this mean there was never an ehp1 for ecc 6.0 or are all the functionalities included in ehp2 now ?? please advise. thanks

Does this mean there was never an ehp1 for ecc 6.0 or are all the functionalities included in ehp2 now ??
Each Enhancement Package is cumulative, meaning EnhP 2 will contain the enhancements of 1 and EnhP 4 will contain the enhancements from 3, 2 and 1 etc
I recall SAP mentioning something about 1 being discontinued but I may stand corrected. Use the latest as already mentioned.
Nelis

Similar Messages

Download EhP4 packages for ECC 6.0 including EhP1 for NW 7.0

Hi experts,
I have the following problem. I must update an existing ECC 6.0 system to NW EhP1. I found it is not possible to update only the NetWeaver but the whole ERP 6.0 must be updated to EhP4. The system is registered in Sol. Man. as ECC with no usage types. The MOPZ does not give me the option to download EhP packages neither it shows in the list of SP the latest SPs for ECC 6.0 EhP4/NW 7.0 EhP1. All the upgrade guides state that only MOPZ in Sol. Man. should be used for download because of the delta upgrades and the generated XML file.
Is there any other way to download the EhP4 packages and to upgrade the system except MOPZ and EHPI?
Thanks!
Pit

If you have 32 bit system, you can use SAINT to apply EHP4, but you will need XML file from MOPZ anyway. I would suggest you to register your system in SOLMAN SMSY as ERP 6.0 system.
Please check also:
https://service.sap.com/erp-ehp
and [THIS DOCUMENT|http://service.sap.com/~sapidb/011000358700000293582009E.PDF] will tell you more including setup in SOLMAN.
You will find all information there.

Does EHP1 for CRM 7.0 require ECC to be on a specific SP level?

Dear All,
Is there any dependency on ECC i.e. do we need to be on a certain SP level in ECC.
Want to check if we can put EhP1 for CRM 7.0 for Marketing Component while keeping ECC backend at existing level i.e. without putting ECC on next level?
i.e. ECC can be at NW 7.0, SP 15, & IS-UT is at 6.00 SP 13 and we can put EhP1 for CRM 7.0? or do we need to bring ECC at par?
In ECC we are at NW 7.0, SP 15, & IS-UT is at 6.00 SP 13
In CRM we are at NW 7.01 SP 05,
CRMLOY (Loyalty Management), WEBCUIF and BBPCRM at CRM 7.0, SP 05 and CRMUIF at CRMUIF 600 SP 0
Thanks
Gaurav Sahai

Hi Michael,
even if the guides are very detailed in the procedure itself they don't show a dependency between components. I was now browsing and reading to roughly 600 pages of SAP documentation, Wikis, Upgrade guides, EHPI guides etc. and I'm still not clear. According to the guides it is necessary to set up SolMan using Landscape Verification to get the system details right and then use MOPZ.
As always when it comes to dependencies it's very confusing from a technical perspective to make a clear statement.
As a German (speaking) company we would have to do several things:
- map the used "Business process" to SAP terminology
- translate that terminology from SAP-German to SAP-English
- use MOPZ to find out a dependency (or none)
And even then - for my understanding this is all way to complex and intransparent to just find out a "dependency". I will certainly not upgrade SolMan, install LV on Solman with some dozen notes to just find out, whether it may be necessary to upgrade to EHP5 or not. There has to be a different/documented way in finding that information, even if that means opening OSS calls and insisting someone to give a clear statement.
I don't consent setting up a tool and invest time (and hence money) to configure that tool to get information (note: we're not talking about the upgrade itself, just about preparation). The complexity and integration of the components is SAP made, not customer made, and therefore SAP has to give that information, not telling customers to mess with yet-another-complex tool (SolMan).
It shouldn't be too difficult to say that component SAP_CRM 702 needs an SAP_APPL 605 or not.
Just my EUR 0.02.
Markus

SAP EHP1 for Solution Manager 7.0 - Post Install Procedure

Hello Folks:
I completed Sol Manager 7.0 EHP1 installation on Win 2008 R2 with MS SQL in a sandbox environment. This is the first time I ever installed SAP on my own and i am in the process of performing post installation steps from Installation Guide.
In the install guide, there is no mention of creating a new client ex: 100. Could you please, provide a list of tasks that generally needed to perform after the installation is completed and before doing any configuration in Solution manager.
I have some very basic idea on the Basis but while going thru Installation Guide I am not sure if there any steps that generally need to perform to complete the installation. My goal is to complete the Sol Mgr installation first and then start preparing for ECC 6.0 Installation.
Thanks a lot in Advance.

Hi,
First - the basic post installation steps are:
1. sick t-code need to execute
2. se06 --> Perform Post-Installation Actions
3. RZ10 --> Utilities --> Import profiles --> Of active servers
4. execute sgen T-code --> This will take some time
5. setup STMS
6. create client (If custom required)
7. Take backup of the system
For the solution manager client you could use the default created '001' client.
Next you need to run the solman_setup template which 'sets up' the SolMan for usage.
Follow config guide at: https://service.sap.com/~sapidb/011000358700000308502009E.PDF
For installing the ECC system, only a install key(from SMSY) is to be generated from SolMan. But if you want to use the SolMan effectively, suggest you to run the entire solman_setup.
Regards,
Srikishan

EHP4 for ERP and EHP1 for NW

Hello,
I have a couple of questions regarding EHP4.
We are planning to install EHP4 for ERP 6.0 in our ECC server. Will this also install EHP1 for Netweaver on them?
Also, we have a portal running on a different server using the ECC server as the backend. Will applying EHP1 for Netweaver (as part of EHP4 for ERP6.0) on the ECC server have any implication on the portal? Or is it mandatory that we upgrade our portal also to EHP1 for Netweaver?
Any help in this regard will be highly appreciated.
Thanks,
Ajay

Hi Ajay,
As part of the EHP4 installation in the ECC Server the basis will get automatically updated to q NW EHP1 level (ABAP).
The EHP1 is not mandatory for the Portal from an ERP EHP4 perspective - you can choose weather you update (EHP1) or not - therefore there are 2 different production versions offered in Maintenance Optimizer.
More information can be found in the guides via: http://service.sap.com/ehp-inst
Best regards,
Christian.

ESS and MSS SP Information for ECC EHP4 SP09

Hello,
We are in the process of upgrading our ECC and EP systems.
We are not able to find the appropriate version information for our ESS
and MSS SPs.
Current version Information:
SAP Enterprise Portal 7.0 EHP1 SP05 (7.01 SP05)
Business Packages:
SAP ECC EHP4 SP05
BP_ERP5COM 1.41 SP5
BP_ERP5ESS 1.41 SP5
BP_ERP5MSS 1.41 SP5
SAP_ESS 603 SP5
SAP_MSS 600 SP16
SAPPCUI_GP 603 SP5
We are upgrading from the above version of ECC to the following
versions:
New versions that we started upgrading to:
SAP ECC EHP4 SP09
EA-HR 604 36
SAP_HR 604 0036
SAP_ABA 701 0008
SAP_BASIS 701 0008
SAP_APPL 604 0009
There is no information available related to the corresponding ESS and
MSS SPs for the above versions.We have looked at a bunch of SAP notes
and the following article without luck:
https://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES
Can any one please suggest what version of ESS, MSS, and PCUI_GP Software
components need to be used for ECC EHP4 SP09 - HR 36?
Thanks,
Shanti

Thanks for your reply.
I see that the latest SPs available for ESS and MSS are following:
SAP_ESS 603 SP 8
SAP_MSS 600 SP 19
PCUI_GP 603 SP 8
Can I use these latest versions available or should I go with the versions you have suggested ?
Please suggest.
Thanks,
Shanti

EHP1 for EP

Hello Guys,
We are in the process of updating our landscape to EHPs.
I have updated the ECC6.0 to EHP4 sp03
and EP to EHP1.
We use the ESS/MSS in portal.
The current version for both the patchs are "600.11.0"
While applying the patch through JSPM for ESS/MSS which is a ECC component,
For the component SAP_ESS in the Specify Queue stage of JSPM
In the Target Release , i get the following "603.4.12, local version is modified by NWDI".
Please guide me if i can proceed with the patching .
Regards
Anthony

Hello Sunny,
Following are the answers to your query
Is you ESS/MSS portal is separate instance ?
Yes the portal is a separate instance from ECC
Is there any specific reason to use JSPM instead of EHPI tool ?
I have used the EHPI for the update to EHP1 in portal. It did all the components but not the ESS/MSS. So i am now updating the ESS/MSS using JSPM.Rest all component of Portal is at 7.01.4.0
When you downloaded stack from MOPZ then what target version you got for these packages ?
Yes, i had downloaded the ehp4 FOR eCC6.0 FROM mopz and the ehp1 for Portal from MOPZ.
The ESS/MSS was dowloaded in the ECC6.0 .
Regards
Anthony

How to deploy BI on EHP1 for SAP NetWeaver Composition Environment 7.1

Hello Gurus,
i have installed SAP NetWeaver 7.01 SR1 SP3 ABAP Trial Version at home on vista 32 bits.
it's running well...
next i have installed EHP1 for SAP NetWeaver Composition Environment 7.1 - Preview Version
and follow this guide :
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b057d7e3-b89e-2b10-1e9e-c426e967f8e1
the portal is running well....coooool.. ( http//:localhost:50100/irj/portal)
after i follow this documentation to create some cubes on BI abap trail (client 001).
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4096b8fc-6be7-2a10-618e-b02a5e5e798f
i create my report with the query designer,
and i see my bi report with transaction RSRT and ABAP WEB tab ( http://localhost:80000)
it's running well....whaooouuu !!!!
Now i'm lost, i would like to deploy my bi report on the portal, but i don't know what i must do.
( and when i try with the query designer or rsrt + java web i have a error message )
- perhaps create an user communication between portal/bi abap where ?
- how to deploy bi java on portal (EHP1 for SAP NetWeaver Composition Environment 7.1)
by the way, i can't find the bi post install template in the configuration wizard on the the portal...
thank's for your help.
Florent,
Edited by: Florent BUTTY on Mar 24, 2009 1:43 PM

Hi,
Can you please tell me what is the diff between 7.01 & 7.1? if you can share any docs, is highly appreciated.
Thanks,
Kiran

Transfer rules are not exist for ECC Quality source system in BI Dev

Hi,
I Connected BI Dev system To ECC Dev and installed the sales, purchasing,... data flow, but here i am not getting the quality data to show the reports, to get Quality data I established the connection between BI Dev and ECC QA, while installing the transfer rules for the ECC QA data sources there no transfer rules are exist(only some of them exist) in the business content, but all the update rules,... are exist, when i right on the data source say create transfer rules it is proposing App praposal.
When i select source system as ECC dev while installing the transfer rules i can see all the transfer rules, but when i select source system as ECC QA i can see only some transfer rules.
only problem with transfer rules(some of them exist), for remaining all objects are properly existing in business content for ECC QA source system.
Regards,
chandra

Hi Fayzrakhmanov
Thanks for the quick reply. We are not moving the stuff to QA. We are only connecting QA ECC system to BI Dev. We already have datasources moved to ECC QA and created source system for ECC QA in BI Dev.
The problem is I am not able to get Business Content transful rule for new source system. We I can find some but not all unlike development.
Help on this would be appreciated.
Thanks

Enter a business location for ECC 6 EHP 5 (Taiwan)

Hi,
While releasing the billing doc to accounting we are getting the error Enter a business location
Message no. F5A192
We are working on ECC6 EHP 5 and this requirement is for Taiwan.
I have found the SAP Note; 376018, however this is valid for 4.6c ONLY.
Could you please check and advise is this note is valid for ECC 6 as well. Or do we need to apply any other notes.
Or any other suggestions.
Thanks & Regards,
Student.

Hi,
Please check the below thread.
Error Enter a Business Location for Korea
Regards,
P Gomatheeswaran

Replication Issue for ECC BP to CRM BP

Hello Experts,
I am trying to Create a BP in ECC with transaction BP, but whenever i save the BP in ECC, the BDOC gets stuck in CRM with the error message that 'Grouping CUBP does not exist',
Everything was working fine before, but recently we had created a copy of Account Group 001 for ECC customer for a Z accoutn group, we made all the required settings in ECC in transaction PIDE and then ran the inital load 'DNL_CUST_KTOKD' the new account group did come over to CRM in table CRMC_T077D and the account group is working fine, the customers created in ECC are getting replicated to CRM, but now the BP created in ECC does not gets replicated to CRM and give the above stated error message in the BDOC.
PLEASE HELP!!

Hello Shoaib ,
In the CRM as well as ECC system in the customising SPRO :
Cross-Application Components   >SAP Business Partner
Business Partner   >Basic Settings
Number Ranges and Groupings   > Define Groups and Assign Numbers Ranges
    > CUBP Grouping could be missing in any one of the systems. Could you please check this.
Thanks & regards,
Krishnen

ST-PI and ST-A/PI Plug-Ins is it neccessary for ECC 6.0 ?

Hi Friends,
Please guide me,
In Early Watch Alert report, it recommends ST-PI and ST-A/PI Plug-Ins for ECC 6.0.
Is this plug-ins really needed for ECC or not , if needed where( which scenario ) they are useful.
Thanks ,
VKP.

Hi,
I checked in our server i got this result
No.   Missing addon/ transport / note
1. [Note 69455 ]      Addon ST-A/PI 01M_ECC600
2. [Note 69455 ]      ST-A/PI Addon Supportpackage SP01
3. [Note 69455 ]      Proc. after addon impl.
4. [Note 539977 ]     Addon ST-PI 2008_1_700
5. [Note 539977 ]     ST-PI Support Packages
6. [Note 12103 ]      Collectors and TCOLL
Successfully implemented addons/ transports/ notes
7. [Note 207223 ]   EWAlert setup
1 to 6 add ons are they compulsory or 7 ( EW setup ) is ok
Thanks,
VKP.

NWDI in SAP EHP1 for NW 7.3

Hi All,
I am new to NWDI concept.
Can any one provide me the step by step process for NWDI in EHP1 for NW 7.3.
I am having the doc for 7.x but this not explains the process correctly.
When I do so it is asking for more configuration.
Please let me know the DOC start from SLD config.
Regards
R.Prakash

Hi All,
Please let me know the steps I followed is right:
1. http://<host>:50000/sld/ -> Set up the SLD and it started running.
2.http://<host>:50000/sld/fun -> Enabled the "CM services","NWDI using CMS" and NWDI using CM services - recommended","SLD" and "service Registry".
3. http://<host>:50000/nwa -> configuration->scenarios->Config Wizard
and tried to run the "DI CMS - create application skeleton" but I am getting error as
"Error: unknown exception: Cannot find software component release (Vendor/Name/Release valenet.net/MYCOMPONENTS/1.0) in CMS. UpdateCMS Server or/and check SLD component content.Error: unknown exception: Cannot find software component release (Vendor/Name/Release valenet.net/MYCOMPONENTS/1.0) in CMS. UpdateCMS Server or/and check SLD component content."
same error I am getting when running "Integration of MII with existing NWDI".
I guess the information filled in the create track is wrong. Can any one tell me the step I followed is right and also where can I get the information about the Software Components?
Regards
R.P

Data Transfer Toolbox for ECC 6.0

I am on ECC 6.0 and I am trying to install the data transfer toolbox (DTT) for HCM. I installed the ERP05V4.SAR file (which is in the 600-ERP-DATA folder), but there are no DTT tcodes. A colleague of mine told me he has used this in earlier versions of SAP (ECC 5.0) and he installed BPERPVD.SAR (which is in the 500-ERP-DATA folder) and the DTT was installed. So it seems that this does not exist for ECC 6.0, but we need it so I am looking for help!
I downloaded all of these files from OSS-downloads-SAP installations and upgrades-Enter by application group-SAP best practices-Best practices for my SAP all in one-SAP BP for HCM-HCM V1.500-installation.
Thanks
Mike

Hi Michael,
Were you able to get DTT installed for ECC 6.0? We are also, in the similar situation, trying to get DTT loaded in ECC 6.0.
Thanks.

How to install the ADS for ECC 6.0?

Hello All,
I have few questions before I can start with my problem
1) Is the ADS a part of the WAS for ECC 6.0 ?
2) Is any Ehp available for installing the ADS separately?
My requirement is to have a PDF application run in ECC 6.0 . I have no idea about the architecture like weather it includes the ADS as we have for Java WAS 6.0 SP 14.
What my team is doing is deploying the application in the Java WAS currently. But they need to deploy it to the same server i.e. ECC 6.0.
I would like to know what is the process to install the ADS in ECC 6.0. And if it is already installed then how to configure that.
Let me know if you have any questions. Looking forward to you.
Regards
DK

Hi Dipendra,
For running the Adobe application You need to configure some thing in both Java as well as in ABAP stack for that abobe form application to work. You need to do some configuration in the Visual administrator for Java & also in the ABAP stack sidi using your SAP user id line creating ADSUSER , ADS_AGENT user id creation and roles assignment and RFC destination creation etc..
Just refer these documents for the installation and post-configuration of Adobe Document Service on NW2004s.
https://websmp105.sap-ag.de/~sapdownload/011000358700003982082006E/InstallADSNW2004s_Jun06.pdf
https://websmp105.sap-ag.de/~sapdownload/011000358700005526362005E/ADS_NW2004s_SPS12.pdf
https://websmp105.sap-ag.de/~sapdownload/011000358700005299622006E/ADS_SizingNW2004sV2_1.pdf
You can start by read the note 736902 to get the credentials for the ADS.
Hope this answers your question.
Thanks,
Greetson

EHP1 for ecc 6.0

Similar Messages

Maybe you are looking for